CPE Details
Linux Kernel 6.12 Release Candidate 5
6.12
2024-12-17
14h04 +00:00
14h04 +00:00
2024-12-17
14h04 +00:00
14h04 +00:00
Alerte pour un CPE
Stay informed of any changes for a specific CPE.
CPE Name: cpe:2.3:o:linux:linux_kernel:6.12:rc5:*:*:*:*:*:*
Informations
Vendor
linuxProduct
linux_kernelVersion
6.12Update
rc5Related CVE
| CVE ID | Published | Description | Score | Severity |
|---|---|---|---|---|
13h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag: depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two. | 5.5 |
Medium |
|
13h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Revert "libfs: fix infinite directory reads for offset dir"
The current directory offset allocator (based on mtree_alloc_cyclic)
stores the next offset value to return in octx->next_offset. This
mechanism typically returns values that increase monotonically over
time. Eventually, though, the newly allocated offset value wraps
back to a low number (say, 2) which is smaller than other already-
allocated offset values.
Yu Kuai |
5.5 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Ensure job pointer is set to NULL after job completion After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished. | 5.5 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. | 5.5 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-uart-backlight: fix serdev race The dell_uart_bl_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. | 4.7 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/proc: fix softlockup in __read_vmcore (part 2) Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the number of softlockups in __read_vmcore at kdump time have gone down, but they still happen sometimes. In a memory constrained environment like the kdump image, a softlockup is not just a harmless message, but it can interfere with things like RCU freeing memory, causing the crashdump to get stuck. The second loop in __read_vmcore has a lot more opportunities for natural sleep points, like scheduling out while waiting for a data write to happen, but apparently that is not always enough. Add a cond_resched() to the second loop in __read_vmcore to (hopefully) get rid of the softlockups. | 5.5 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: hrtimers: Handle CPU state correctly on hotplug Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to CPUHP_ONLINE: Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set to 1 throughout. However, during a CPU unplug operation, the tick and the clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online state, for instance CFS incorrectly assumes that the hrtick is already active, and the chance of the clockevent device to transition to oneshot mode is also lost forever for the CPU, unless it goes back to a lower state than CPUHP_HRTIMERS_PREPARE once. This round-trip reveals another issue; cpu_base.online is not set to 1 after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer(). Aside of that, the bulk of the per CPU state is not reset either, which means there are dangling pointers in the worst case. Address this by adding a corresponding startup() callback, which resets the stale per CPU state and sets the online flag. [ tglx: Make the new callback unconditionally available, remove the online modification in the prepare() callback and clear the remaining state in the starting callback instead of the prepare callback ] | 7.8 |
High |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix ets qdisc OOB Indexing
Haowei Yan |
7.8 |
High |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Ratelimit warning logs to prevent VM denial of service If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM. | 5.5 |
Medium |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following: if (newport > serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); break; } The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL: serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds. | 5.5 |
Medium |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vfio/platform: check the bounds of read/write syscalls count and offset are passed from user space and not checked, only offset is capped to 40 bits, which can be used to read/write out of bounds of the device. | 7.8 |
High |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominator defaults to 1 [WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. (cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7) | 5.5 |
Medium |
|
11h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: fix serdev race The yt2_1380_fc_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. | 4.7 |
Medium |
|
11h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: Convert gpio_lock to raw spinlock irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) | 5.5 |
Medium |
|
11h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Don't enable interrupts in its_irq_set_vcpu_affinity() The following call-chain leads to enabling interrupts in a nested interrupt disabled section: irq_set_vcpu_affinity() irq_get_desc_lock() raw_spin_lock_irqsave() <--- Disable interrupts its_irq_set_vcpu_affinity() guard(raw_spinlock_irq) <--- Enables interrupts when leaving the guard() irq_put_desc_unlock() <--- Warns because interrupts are enabled This was broken in commit b97e8a2f7130, which replaced the original raw_spin_[un]lock() pair with guard(raw_spinlock_irq). Fix the issue by using guard(raw_spinlock). [ tglx: Massaged change log ] | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sk_select_reuseport() memory leak As pointed out in the original comment, lookup in sockmap can return a TCP ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb does not imply a non-refcounted socket. Drop sk's reference in both error paths. unreferenced object 0xffff888101911800 (size 2048): comm "test_progs", pid 44109, jiffies 4297131437 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 9336483b): __kmalloc_noprof+0x3bf/0x560 __reuseport_alloc+0x1d/0x40 reuseport_alloc+0xca/0x150 reuseport_attach_prog+0x87/0x140 sk_reuseport_attach_bpf+0xc8/0x100 sk_setsockopt+0x1181/0x1990 do_sock_setsockopt+0x12b/0x160 __sys_setsockopt+0x7b/0xc0 __x64_sys_setsockopt+0x1b/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: always recalculate features after XDP clearing, fix null-deref Recalculate features when XDP is detached. Before: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: off [requested on] After: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: on The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly. Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the: if (old_rx_rings != bp->hw_resc.resv_rx_rings && condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with: BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0 As we try to access a freed ring. The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix lockup on tx to unregistering netdev with carrier Commit in a fixes tag attempted to fix the issue in the following sequence of calls: do_output -> ovs_vport_send -> dev_queue_xmit -> __dev_queue_xmit -> netdev_core_pick_tx -> skb_tx_hash When device is unregistering, the 'dev->real_num_tx_queues' goes to zero and the 'while (unlikely(hash >= qcount))' loop inside the 'skb_tx_hash' becomes infinite, locking up the core forever. But unfortunately, checking just the carrier status is not enough to fix the issue, because some devices may still be in unregistering state while reporting carrier status OK. One example of such device is a net/dummy. It sets carrier ON on start, but it doesn't implement .ndo_stop to set the carrier off. And it makes sense, because dummy doesn't really have a carrier. Therefore, while this device is unregistering, it's still easy to hit the infinite loop in the skb_tx_hash() from the OVS datapath. There might be other drivers that do the same, but dummy by itself is important for the OVS ecosystem, because it is frequently used as a packet sink for tcpdump while debugging OVS deployments. And when the issue is hit, the only way to recover is to reboot. Fix that by also checking if the device is running. The running state is handled by the net core during unregistering, so it covers unregistering case better, and we don't really need to send packets to devices that are not running anyway. While only checking the running state might be enough, the carrier check is preserved. The running and the carrier states seem disjoined throughout the code and different drivers. And other core functions like __dev_direct_xmit() check both before attempting to transmit a packet. So, it seems safer to check both flags in OVS as well. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
pktgen: Avoid out-of-bounds access in get_imix_entries
Passing a sufficient amount of imix entries leads to invalid access to the
pkt_dev->imix_entries array because of the incorrect boundary check.
UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24
index 20 is out of range for type 'imix_pkt [20]'
CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
|
7.8 |
High |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clear port select structure when fail to create Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
Attempt to enable IPsec packet offload in tunnel mode in debug kernel
generates the following kernel panic, which is happening due to two
issues:
1. In SA add section, the should be _bh() variant when marking SA mode.
2. There is not needed flush_workqueue in SA delete routine. It is not
needed as at this stage as it is removed from SADB and the running work
will be canceled later in SA free.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.12.0+ #4 Not tainted
-----------------------------------------------------
charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
and this task is already holding:
ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
which would create a new lock dependency:
(&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&x->lock){+.-.}-{3:3}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
to a SOFTIRQ-irq-unsafe lock:
(&xa->xa_lock#24){+.+.}-{3:3}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xa->xa_lock#24);
local_irq_disable();
lock(&x->lock);
lock(&xa->xa_lock#24);
|
5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double free of TCP_Server_Info::hostname
When shutting down the server in cifs_put_tcp_session(), cifsd thread
might be reconnecting to multiple DFS targets before it realizes it
should exit the loop, so @server->hostname can't be freed as long as
cifsd thread isn't done. Otherwise the following can happen:
RIP: 0010:__slab_free+0x223/0x3c0
Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89
1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f>
0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80
RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246
RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068
RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400
RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000
R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500
R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068
FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000)
000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4:
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: afs: Fix merge preference rule failure condition syzbot reported a lock held when returning to userspace[1]. This is because if argc is less than 0 and the function returns directly, the held inode lock is not released. Fix this by store the error in ret and jump to done to clean up instead of returning directly. [dh: Modified Lizhi Xu's original patch to make it honour the error code from afs_split_string()] [1] WARNING: lock held when returning to user space! 6.13.0-rc3-syzkaller-00209-g499551201b5f #0 Not tainted ------------------------------------------------ syz-executor133/5823 is leaving the kernel with locks still held! 1 lock held by syz-executor133/5823: #0: ffff888071cffc00 (&sb->s_type->i_mutex_key#9){++++}-{4:4}, at: inode_lock include/linux/fs.h:818 [inline] #0: ffff888071cffc00 (&sb->s_type->i_mutex_key#9){++++}-{4:4}, at: afs_proc_addr_prefs_write+0x2bb/0x14e0 fs/afs/addr_prefs.c:388 | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock/bpf: return early if transport is not assigned Some of the core functions can only be called if the transport has been assigned. As Michal reported, a socket might have the transport at NULL, for example after a failed connect(), causing the following trace: BUG: kernel NULL pointer dereference, address: 00000000000000a0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+ RIP: 0010:vsock_connectible_has_data+0x1f/0x40 Call Trace: vsock_bpf_recvmsg+0xca/0x5e0 sock_recvmsg+0xb9/0xc0 __sys_recvfrom+0xb3/0x130 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e So we need to check the `vsk->transport` in vsock_bpf_recvmsg(), especially for connected sockets (stream/seqpacket) as we already do in __vsock_connectible_recvmsg(). | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: discard packets if the transport changes If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iomap: avoid avoid truncating 64-bit offset to 32 bits on 32-bit kernels, iomap_write_delalloc_scan() was inadvertently using a 32-bit position due to folio_next_index() returning an unsigned long. This could lead to an infinite loop when writing to an xfs filesystem. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock: prevent null-ptr-deref in vsock_*[has_data|has_space] Recent reports have shown how we sometimes call vsock_*_has_data() when a vsock socket has been de-assigned from a transport (see attached links), but we shouldn't. Previous commits should have solved the real problems, but we may have more in the future, so to avoid null-ptr-deref, we can return 0 (no space, no data available) but with a warning. This way the code should continue to run in a nearly consistent state and have a warning that allows us to debug future problems. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: filemap: avoid truncating 64-bit offset to 32 bits On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a 64-bit value to 32 bits, leading to a possible infinite loop when writing to an xfs filesystem. | 5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: avoid NULL pointer dereference if no valid extent tree
[BUG]
Syzbot reported a crash with the following call trace:
BTRFS info (device loop0): scrub: started on devid 1
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs]
Call Trace:
|
5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1298: Add NULL check in ads1298_init devm_kasprintf() can return a NULL pointer on failure. A check on the return value of such a call in ads1298_init() is missing. Add it. | 5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: exfat: fix the infinite loop in exfat_readdir() If the file system is corrupted so that a cluster is linked to itself in the cluster chain, and there is an unused directory entry in the cluster, 'dentry' will not be incremented, causing condition 'dentry < max_dentries' unable to prevent an infinite loop. This infinite loop causes s_lock not to be released, and other tasks will hang, such as exfat_sync_fs(). This commit stops traversing the cluster chain when there is unused directory entry in the cluster to avoid this infinite loop. | 5.5 |
Medium |
|
12h09 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/sctp: Prevent autoclose integer overflow in sctp_association_init() While by default max_autoclose equals to INT_MAX / HZ, one may set net.sctp.max_autoclose to UINT_MAX. There is code in sctp_association_init() that can consequently trigger overflow. | 5.5 |
Medium |
|
12h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fgraph: Add READ_ONCE() when accessing fgraph_array[] In __ftrace_return_to_handler(), a loop iterates over the fgraph_array[] elements, which are fgraph_ops. The loop checks if an element is a fgraph_stub to prevent using a fgraph_stub afterward. However, if the compiler reloads fgraph_array[] after this check, it might race with an update to fgraph_array[] that introduces a fgraph_stub. This could result in the stub being processed, but the stub contains a null "func_hash" field, leading to a NULL pointer dereference. To ensure that the gops compared against the fgraph_stub matches the gops processed later, add a READ_ONCE(). A similar patch appears in commit 63a8dfb ("function_graph: Add READ_ONCE() when accessing fgraph_array[]"). | 4.7 |
Medium |
|
12h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gve: guard XSK operations on the existence of queues This patch predicates the enabling and disabling of XSK pools on the existence of queues. As it stands, if the interface is down, disabling or enabling XSK pools would result in a crash, as the RX queue pointer would be NULL. XSK pool registration will occur as part of the next interface up. Similarly, xsk_wakeup needs be guarded against queues disappearing while the function is executing, so a check against the GVE_PRIV_FLAGS_NAPI_ENABLED flag is added to synchronize with the disabling of the bit and the synchronize_net() in gve_turndown. | 5.5 |
Medium |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfs: Fix oops in nfs_netfs_init_request() when copying to cache When netfslib wants to copy some data that has just been read on behalf of nfs, it creates a new write request and calls nfs_netfs_init_request() to initialise it, but with a NULL file pointer. This causes nfs_file_open_context() to oops - however, we don't actually need the nfs context as we're only going to write to the cache. Fix this by just returning if we aren't given a file pointer and emit a warning if the request was for something other than copy-to-cache. Further, fix nfs_netfs_free_request() so that it doesn't try to free the context if the pointer is NULL. | 5.5 |
Medium |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err The pointer need to be set to NULL, otherwise KASAN complains about use-after-free. Because in mtk_drm_bind, all private's drm are set as follows. private->all_drm_private[i]->drm = drm; And drm will be released by drm_dev_put in case mtk_drm_kms_init returns failure. However, the shutdown path still accesses the previous allocated memory in drm_atomic_helper_shutdown. [ 84.874820] watchdog: watchdog0: watchdog did not stop! [ 86.512054] ================================================================== [ 86.513162] BUG: KASAN: use-after-free in drm_atomic_helper_shutdown+0x33c/0x378 [ 86.514258] Read of size 8 at addr ffff0000d46fc068 by task shutdown/1 [ 86.515213] [ 86.515455] CPU: 1 UID: 0 PID: 1 Comm: shutdown Not tainted 6.13.0-rc1-mtk+gfa1a78e5d24b-dirty #55 [ 86.516752] Hardware name: Unknown Product/Unknown Product, BIOS 2022.10 10/01/2022 [ 86.517960] Call trace: [ 86.518333] show_stack+0x20/0x38 (C) [ 86.518891] dump_stack_lvl+0x90/0xd0 [ 86.519443] print_report+0xf8/0x5b0 [ 86.519985] kasan_report+0xb4/0x100 [ 86.520526] __asan_report_load8_noabort+0x20/0x30 [ 86.521240] drm_atomic_helper_shutdown+0x33c/0x378 [ 86.521966] mtk_drm_shutdown+0x54/0x80 [ 86.522546] platform_shutdown+0x64/0x90 [ 86.523137] device_shutdown+0x260/0x5b8 [ 86.523728] kernel_restart+0x78/0xf0 [ 86.524282] __do_sys_reboot+0x258/0x2f0 [ 86.524871] __arm64_sys_reboot+0x90/0xd8 [ 86.525473] invoke_syscall+0x74/0x268 [ 86.526041] el0_svc_common.constprop.0+0xb0/0x240 [ 86.526751] do_el0_svc+0x4c/0x70 [ 86.527251] el0_svc+0x4c/0xc0 [ 86.527719] el0t_64_sync_handler+0x144/0x168 [ 86.528367] el0t_64_sync+0x198/0x1a0 [ 86.528920] [ 86.529157] The buggy address belongs to the physical page: [ 86.529972] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff0000d46fd4d0 pfn:0x1146fc [ 86.531319] flags: 0xbfffc0000000000(node=0|zone=2|lastcpupid=0xffff) [ 86.532267] raw: 0bfffc0000000000 0000000000000000 dead000000000122 0000000000000000 [ 86.533390] raw: ffff0000d46fd4d0 0000000000000000 00000000ffffffff 0000000000000000 [ 86.534511] page dumped because: kasan: bad access detected [ 86.535323] [ 86.535559] Memory state around the buggy address: [ 86.536265] ffff0000d46fbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.537314] ffff0000d46fbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.538363] >ffff0000d46fc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.544733] ^ [ 86.551057] ffff0000d46fc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.557510] ffff0000d46fc100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.563928] ================================================================== [ 86.571093] Disabling lock debugging due to kernel taint [ 86.577642] Unable to handle kernel paging request at virtual address e0e9c0920000000b [ 86.581834] KASAN: maybe wild-memory-access in range [0x0752049000000058-0x075204900000005f] ... | 7.8 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix divide error in DM plane scale calcs
dm_get_plane_scale doesn't take into account plane scaled size equal to
zero, leading to a kernel oops due to division by zero. Fix by setting
out-scale size as zero when the dst size is zero, similar to what is
done by drm_calc_scale(). This issue started with the introduction of
cursor ovelay mode that uses this function to assess cursor mode changes
via dm_crtc_get_cursor_mode() before checking plane state.
[Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231
[ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024
[ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu]
[ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66
[ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246
[ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500
[ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4
[ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00
[ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010
[ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0
[ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000
[ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0
[ +0.000004] Call Trace:
[ +0.000007] |
5.5 |
Medium |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling Resolve kernel panic caused by improper handling of IRQs while accessing GPIO values. This is done by replacing generic_handle_irq with handle_nested_irq. | 5.5 |
Medium |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci: fix NULL pointer issue on shared irq case The tcpci_irq() may meet below NULL pointer dereference issue: [ 2.641851] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 2.641951] status 0x1, 0x37f [ 2.650659] Mem abort info: [ 2.656490] ESR = 0x0000000096000004 [ 2.660230] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.665532] SET = 0, FnV = 0 [ 2.668579] EA = 0, S1PTW = 0 [ 2.671715] FSC = 0x04: level 0 translation fault [ 2.676584] Data abort info: [ 2.679459] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 2.684936] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.689980] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.695284] [0000000000000010] user address but active_mm is swapper [ 2.701632] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 2.707883] Modules linked in: [ 2.710936] CPU: 1 UID: 0 PID: 87 Comm: irq/111-2-0051 Not tainted 6.12.0-rc6-06316-g7f63786ad3d1-dirty #4 [ 2.720570] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 2.726040] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.732989] pc : tcpci_irq+0x38/0x318 [ 2.736647] lr : _tcpci_irq+0x14/0x20 [ 2.740295] sp : ffff80008324bd30 [ 2.743597] x29: ffff80008324bd70 x28: ffff800080107894 x27: ffff800082198f70 [ 2.750721] x26: ffff0000050e6680 x25: ffff000004d172ac x24: ffff0000050f0000 [ 2.757845] x23: ffff000004d17200 x22: 0000000000000001 x21: ffff0000050f0000 [ 2.764969] x20: ffff000004d17200 x19: 0000000000000000 x18: 0000000000000001 [ 2.772093] x17: 0000000000000000 x16: ffff80008183d8a0 x15: ffff00007fbab040 [ 2.779217] x14: ffff00007fb918c0 x13: 0000000000000000 x12: 000000000000017a [ 2.786341] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80008324bd00 [ 2.793465] x8 : ffff0000050f0af0 x7 : ffff00007fbaa840 x6 : 0000000000000031 [ 2.800589] x5 : 000000000000017a x4 : 0000000000000002 x3 : 0000000000000002 [ 2.807713] x2 : ffff80008324bd3a x1 : 0000000000000010 x0 : 0000000000000000 [ 2.814838] Call trace: [ 2.817273] tcpci_irq+0x38/0x318 [ 2.820583] _tcpci_irq+0x14/0x20 [ 2.823885] irq_thread_fn+0x2c/0xa8 [ 2.827456] irq_thread+0x16c/0x2f4 [ 2.830940] kthread+0x110/0x114 [ 2.834164] ret_from_fork+0x10/0x20 [ 2.837738] Code: f9426420 f9001fe0 d2800000 52800201 (f9400a60) This may happen on shared irq case. Such as two Type-C ports share one irq. After the first port finished tcpci_register_port(), it may trigger interrupt. However, if the interrupt comes by chance the 2nd port finishes devm_request_threaded_irq(), the 2nd port interrupt handler will run at first. Then the above issue happens due to tcpci is still a NULL pointer in tcpci_irq() when dereference to regmap. devm_request_threaded_irq() <-- port1 irq comes disable_irq(client->irq); tcpci_register_port() This will restore the logic to the state before commit (77e85107a771 "usb: typec: tcpci: support edge irq"). However, moving tcpci_register_port() earlier creates a problem when use edge irq because tcpci_init() will be called before devm_request_threaded_irq(). The tcpci_init() writes the ALERT_MASK to the hardware to tell it to start generating interrupts but we're not ready to deal with them yet, then the ALERT events may be missed and ALERT line will not recover to high level forever. To avoid the issue, this will also set ALERT_MASK register after devm_request_threaded_irq() return. | 5.5 |
Medium |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: pressure: zpa2326: fix information leak in triggered buffer The 'sample' local struct is used to push data to user space from a triggered buffer, but it has a hole between the temperature and the timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp). This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer The 'data' array is allocated via kmalloc() and it is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Use kzalloc for the memory allocation to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: light: vcnl4035: fix information leak in triggered buffer The 'buffer' local array is used to push data to userspace from a triggered buffer, but it does not set an initial value for the single data element, which is an u16 aligned to 8 bytes. That leaves at least 4 bytes uninitialized even after writing an integer value with regmap_read(). Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1745: fix information leak in triggered buffer The 'scan' local struct is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: imu: kmx61: fix information leak in triggered buffer The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: rockchip_saradc: fix information leak in triggered buffer The 'data' local struct is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads8688: fix information leak in triggered buffer The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix information leak in triggered buffer The 'scan' local struct is used to push data to user space from a triggered buffer, but it has a hole between the sample (unsigned int) and the timestamp. This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
10h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ipvlan: Fix use-after-free in ipvlan_get_iflink(). syzbot presented an use-after-free report [0] regarding ipvlan and linkwatch. ipvlan does not hold a refcnt of the lower device unlike vlan and macvlan. If the linkwatch work is triggered for the ipvlan dev, the lower dev might have already been freed, resulting in UAF of ipvlan->phy_dev in ipvlan_get_iflink(). We can delay the lower dev unregistration like vlan and macvlan by holding the lower dev's refcnt in dev->netdev_ops->ndo_init() and releasing it in dev->priv_destructor(). Jakub pointed out calling .ndo_XXX after unregister_netdevice() has returned is error prone and suggested [1] addressing this UAF in the core by taking commit 750e51603395 ("net: avoid potential UAF in default_operstate()") further. Let's assume unregistering devices DOWN and use RCU protection in default_operstate() not to race with the device unregistration. [0]: BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944 CPU: 0 UID: 0 PID: 6944 Comm: kworker/u8:35 Not tainted 6.13.0-rc2-g9bc5c9515b48 #12 4c3cb9e8b4565456f6a355f312ff91f4f29b3c47 Hardware name: linux,dummy-virt (DT) Workqueue: events_unbound linkwatch_event Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:484 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load4_noabort+0x20/0x30 mm/kasan/report_generic.c:380 ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 dev_get_iflink+0x7c/0xd8 net/core/dev.c:674 default_operstate net/core/link_watch.c:45 [inline] rfc2863_policy+0x144/0x360 net/core/link_watch.c:72 linkwatch_do_dev+0x60/0x228 net/core/link_watch.c:175 __linkwatch_run_queue+0x2f4/0x5b8 net/core/link_watch.c:239 linkwatch_event+0x64/0xa8 net/core/link_watch.c:282 process_one_work+0x700/0x1398 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3391 kthread+0x2b0/0x360 kernel/kthread.c:389 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 Allocated by task 9303: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4283 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4289 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:650 alloc_netdev_mqs+0xb4/0x1118 net/core/dev.c:11209 rtnl_create_link+0x2b8/0xb60 net/core/rtnetlink.c:3595 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3771 __rtnl_newlink net/core/rtnetlink.c:3896 [inline] rtnl_newlink+0x122c/0x15c0 net/core/rtnetlink.c:4011 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x2ec/0x438 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __arm64_sys_sendto+0xe4/0x110 net/socket.c:2200 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el ---truncated--- | 7.8 |
High |
|
10h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is sent on HIP08 devices Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 | 5.5 |
Medium |
|
10h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix tlb invalidation when wedging If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6) | 5.5 |
Medium |
|
10h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: remove kernfs active break A warning was found: WARNING: CPU: 10 PID: 3486953 at fs/kernfs/file.c:828 CPU: 10 PID: 3486953 Comm: rmdir Kdump: loaded Tainted: G RIP: 0010:kernfs_should_drain_open_files+0x1a1/0x1b0 RSP: 0018:ffff8881107ef9e0 EFLAGS: 00010202 RAX: 0000000080000002 RBX: ffff888154738c00 RCX: dffffc0000000000 RDX: 0000000000000007 RSI: 0000000000000004 RDI: ffff888154738c04 RBP: ffff888154738c04 R08: ffffffffaf27fa15 R09: ffffed102a8e7180 R10: ffff888154738c07 R11: 0000000000000000 R12: ffff888154738c08 R13: ffff888750f8c000 R14: ffff888750f8c0e8 R15: ffff888154738ca0 FS: 00007f84cd0be740(0000) GS:ffff8887ddc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555f9fbe00c8 CR3: 0000000153eec001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kernfs_drain+0x15e/0x2f0 __kernfs_remove+0x165/0x300 kernfs_remove_by_name_ns+0x7b/0xc0 cgroup_rm_file+0x154/0x1c0 cgroup_addrm_files+0x1c2/0x1f0 css_clear_dir+0x77/0x110 kill_css+0x4c/0x1b0 cgroup_destroy_locked+0x194/0x380 cgroup_rmdir+0x2a/0x140 It can be explained by: rmdir echo 1 > cpuset.cpus kernfs_fop_write_iter // active=0 cgroup_rm_file kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain cpuset_write_resmask wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active This warning is caused by 'kernfs_break_active_protection' when it is writing to cpuset.cpus, and the cgroup is removed concurrently. The commit 3a5a6d0c2b03 ("cpuset: don't nest cgroup_mutex inside get_online_cpus()") made cpuset_hotplug_workfn asynchronous, This change involves calling flush_work(), which can create a multiple processes circular locking dependency that involve cgroup_mutex, potentially leading to a deadlock. To avoid deadlock. the commit 76bb5ab8f6e3 ("cpuset: break kernfs active protection in cpuset_write_resmask()") added 'kernfs_break_active_protection' in the cpuset_write_resmask. This could lead to this warning. After the commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset_write_resmask no longer needs to wait the hotplug to finish, which means that concurrent hotplug and cpuset operations are no longer possible. Therefore, the deadlock doesn't exist anymore and it does not have to 'break active protection' now. To fix this warning, just remove kernfs_break_active_protection operation in the 'cpuset_write_resmask'. | 5.5 |
Medium |
|
10h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix waker_bfqq UAF after bfq_split_bfqq()
Our syzkaller report a following UAF for v6.6:
BUG: KASAN: slab-use-after-free in bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958
Read of size 8 at addr ffff8881b57147d8 by task fsstress/232726
CPU: 2 PID: 232726 Comm: fsstress Not tainted 6.6.0-g3629d1885222 #39
Call Trace:
|
7.8 |
High |
|
13h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: fix memory leak in tcp_conn_request()
If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will
return without free the dst memory, which allocated in af_ops->route_req.
Here is the kmemleak stack:
unreferenced object 0xffff8881198631c0 (size 240):
comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s)
hex dump (first 32 bytes):
00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................
81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U..............
backtrace:
[ |
5.5 |
Medium |
|
13h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netrom: check buffer length before accessing it Syzkaller reports an uninit value read from ax25cmp when sending raw message through ieee802154 implementation. ===================================================== BUG: KMSAN: uninit-value in ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 nr_dev_get+0x20e/0x450 net/netrom/nr_route.c:601 nr_route_frame+0x1a2/0xfc0 net/netrom/nr_route.c:774 nr_xmit+0x5a/0x1c0 net/netrom/nr_dev.c:144 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] raw_sendmsg+0x654/0xc10 net/ieee802154/socket.c:299 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] raw_sendmsg+0x36d/0xc10 net/ieee802154/socket.c:282 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5037 Comm: syz-executor166 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 ===================================================== This issue occurs because the skb buffer is too small, and it's actual allocation is aligned. This hides an actual issue, which is that nr_route_frame does not validate the buffer size before using it. Fix this issue by checking skb->len before accessing any fields in skb->data. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | 5.5 |
Medium |
|
13h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Skip restore TC rules for vport rep without loaded flag During driver unload, unregister_netdev is called after unloading vport rep. So, the mlx5e_rep_priv is already freed while trying to get rpriv->netdev, or walk rpriv->tc_ht, which results in use-after-free. So add the checking to make sure access the data of vport rep which is still loaded. | 7.8 |
High |
|
13h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Ensure 'ib_sge list' is accessible Move the declaration of the 'ib_sge list' variable outside the 'always_invalidate' block to ensure it remains accessible for use throughout the function. Previously, 'ib_sge list' was declared within the 'always_invalidate' block, limiting its accessibility, then caused a 'BUG: kernel NULL pointer dereference'[1]. ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2d0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? memcpy_orig+0xd5/0x140 rxe_mr_copy+0x1c3/0x200 [rdma_rxe] ? rxe_pool_get_index+0x4b/0x80 [rdma_rxe] copy_data+0xa5/0x230 [rdma_rxe] rxe_requester+0xd9b/0xf70 [rdma_rxe] ? finish_task_switch.isra.0+0x99/0x2e0 rxe_sender+0x13/0x40 [rdma_rxe] do_task+0x68/0x1e0 [rdma_rxe] process_one_work+0x177/0x330 worker_thread+0x252/0x390 ? __pfx_worker_thread+0x10/0x10 This change ensures the variable is available for subsequent operations that require it. [1] https://lore.kernel.org/linux-rdma/[email protected]/ | 5.5 |
Medium |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ila: serialize calls to nf_register_net_hooks()
syzbot found a race in ila_add_mapping() [1]
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501
CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
|
7.8 |
High |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
During the unmount path, at close_ctree(), we first stop the cleaner
kthread, using kthread_stop() which frees the associated task_struct, and
then stop and destroy all the work queues. However after we stopped the
cleaner we may still have a worker from the delalloc_workers queue running
inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(),
which in turn tries to wake up the cleaner kthread - which was already
destroyed before, resulting in a use-after-free on the task_struct.
Syzbot reported this with the following stack traces:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
Read of size 8 at addr ffff8880259d2818 by task kworker/u8:3/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.13.0-rc1-syzkaller-00002-gcdd30ebb1b9f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: btrfs-delalloc btrfs_work_helper
Call Trace:
|
7.8 |
High |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: set ATTR_CTIME flags when setting mtime
David reported that the new warning from setattr_copy_mgtime is coming
like the following.
[ 113.215316] ------------[ cut here ]------------
[ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 113.234797] Call Trace:
[ 113.235116] |
5.5 |
Medium |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv When mounting ocfs2 and then remounting it as read-only, a slab-use-after-free occurs after the user uses a syscall to quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the dangling pointer. During the remounting process, the pointer dqi_priv is freed but is never set as null leaving it to be accessed. Additionally, the read-only option for remounting sets the DQUOT_SUSPENDED flag instead of setting the DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the next quota, the function ocfs2_get_next_id is called and only checks the quota usage flags and not the quota suspended flags. To fix this, I set dqi_priv to null when it is freed after remounting with read-only and put a check for DQUOT_SUSPENDED in ocfs2_get_next_id. [[email protected]: coding-style cleanups] | 7.8 |
High |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Prevent integer overflow issue In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32 values that come from the user so the multiplication can lead to integer wrapping. Then we pass the result to uverbs_request_next_ptr() which also could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)" multiplication can also overflow on 32bit systems although it's fine on 64bit systems. This patch does two things. First, I've re-arranged the condition in uverbs_request_next_ptr() so that the use controlled variable "len" is on one side of the comparison by itself without any math. Then I've modified all the callers to use size_mul() for the multiplications. | 5.5 |
Medium |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm: adv7511: Fix use-after-free in adv7533_attach_dsi() The host_node pointer was assigned and freed in adv7533_parse_dt(), and later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put() in error path of probe() and also in the remove(). | 7.8 |
High |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix TCP options overflow.
Syzbot reported the following splat:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline]
RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552
Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83
RSP: 0000:ffffc90003916c90 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac
R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007
R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
15h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy() In split_large_buddy(), we might call pfn_to_page() on a PFN that might not exist. In corner cases, such as when freeing the highest pageblock in the last memory section, this could result with CONFIG_SPARSEMEM && !CONFIG_SPARSEMEM_EXTREME in __pfn_to_section() returning NULL and and __section_mem_map_addr() dereferencing that NULL pointer. Let's fix it, and avoid doing a pfn_to_page() call for the first iteration, where we already have the page. So far this was found by code inspection, but let's just CC stable as the fix is easy. | 5.5 |
Medium |
|
14h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of FPMR will be retained. Before this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0xffff800083963d50 After this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | 6.1 |
Medium |
|
14h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_POE Currently poe_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.por_el0, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of POR_EL1 will be retained. Before this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50 After this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | 6.1 |
Medium |
|
14h47 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained. The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case. | 6.1 |
Medium |
|
14h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove() This will ensure that the scsi host is cleaned up properly using scsi_host_dev_release(). Otherwise, it may lead to memory leaks. | 5.5 |
Medium |
|
12h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix for a potential deadlock This fixes a 'possible circular locking dependency detected' warning CPU0 CPU1 ---- ---- lock(&instance->reset_mutex); lock(&shost->scan_mutex); lock(&instance->reset_mutex); lock(&shost->scan_mutex); Fix this by temporarily releasing the reset_mutex. | 5.5 |
Medium |
|
12h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM In some cases, rk_hdptx_phy_runtime_resume() may be invoked before platform_set_drvdata() is executed in ->probe(), leading to a NULL pointer dereference when using the return of dev_get_drvdata(). Ensure platform_set_drvdata() is called before devm_pm_runtime_enable(). | 5.5 |
Medium |
|
12h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req() While receiving an MST up request message from one thread in drm_dp_mst_handle_up_req(), the MST topology could be removed from another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL. This could lead to a NULL deref/use-after-free of mst_primary in drm_dp_mst_handle_up_req(). Avoid the above by holding a reference for mst_primary in drm_dp_mst_handle_up_req() while it's used. v2: Fix kfreeing the request if getting an mst_primary reference fails. | 7.8 |
High |
|
12h35 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/modes: Avoid divide by zero harder in drm_mode_vrefresh() drm_mode_vrefresh() is trying to avoid divide by zero by checking whether htotal or vtotal are zero. But we may still end up with a div-by-zero of vtotal*htotal*... | 5.5 |
Medium |
|
12h35 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet
If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is
fully initialized, we can hit the panic below:
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_utils
...
BUG: kernel NULL pointer dereference, address: 0000000000000000
CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1
RIP: 0010:hv_pkt_iter_first+0x12/0xd0
Call Trace:
...
vmbus_recvpacket
hv_kvp_onchannelcallback
vmbus_on_event
tasklet_action_common
tasklet_action
handle_softirqs
irq_exit_rcu
sysvec_hyperv_stimer0
|
5.5 |
Medium |
|
12h35 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix TCP timers deadlock after rmmod Commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.") fixed a netns UAF by manually enabled socket refcounting (sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)). The reason the patch worked for that bug was because we now hold references to the netns (get_net_track() gets a ref internally) and they're properly released (internally, on __sk_destruct()), but only because sk->sk_net_refcnt was set. Problem: (this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless if init_net or other) Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not only out of cifs scope, but also technically wrong -- it's set conditionally based on user (=1) vs kernel (=0) sockets. And net/ implementations seem to base their user vs kernel space operations on it. e.g. upon TCP socket close, the TCP timers are not cleared because sk->sk_net_refcnt=1: (cf. commit 151c9c724d05 ("tcp: properly terminate timers for kernel sockets")) net/ipv4/tcp.c: void tcp_close(struct sock *sk, long timeout) { lock_sock(sk); __tcp_close(sk, timeout); release_sock(sk); if (!sk->sk_net_refcnt) inet_csk_clear_xmit_timers_sync(sk); sock_put(sk); } Which will throw a lockdep warning and then, as expected, deadlock on tcp_write_timer(). A way to reproduce this is by running the reproducer from ef7134c7fc48 and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep warning shows up. Fix: We shouldn't mess with socket internals ourselves, so do not set sk_net_refcnt manually. Also change __sock_create() to sock_create_kern() for explicitness. As for non-init_net network namespaces, we deal with it the best way we can -- hold an extra netns reference for server->ssocket and drop it when it's released. This ensures that the netns still exists whenever we need to create/destroy server->ssocket, but is not directly tied to it. | 7.8 |
High |
|
12h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: block: Prevent potential deadlocks in zone write plug error recovery Zone write plugging for handling writes to zones of a zoned block device always execute a zone report whenever a write BIO to a zone fails. The intent of this is to ensure that the tracking of a zone write pointer is always correct to ensure that the alignment to a zone write pointer of write BIOs can be checked on submission and that we can always correctly emulate zone append operations using regular write BIOs. However, this error recovery scheme introduces a potential deadlock if a device queue freeze is initiated while BIOs are still plugged in a zone write plug and one of these write operation fails. In such case, the disk zone write plug error recovery work is scheduled and executes a report zone. This in turn can result in a request allocation in the underlying driver to issue the report zones command to the device. But with the device queue freeze already started, this allocation will block, preventing the report zone execution and the continuation of the processing of the plugged BIOs. As plugged BIOs hold a queue usage reference, the queue freeze itself will never complete, resulting in a deadlock. Avoid this problem by completely removing from the zone write plugging code the use of report zones operations after a failed write operation, instead relying on the device user to either execute a report zones, reset the zone, finish the zone, or give up writing to the device (which is a fairly common pattern for file systems which degrade to read-only after write failures). This is not an unreasonnable requirement as all well-behaved applications, FSes and device mapper already use report zones to recover from write errors whenever possible by comparing the current position of a zone write pointer with what their assumption about the position is. The changes to remove the automatic error recovery are as follows: - Completely remove the error recovery work and its associated resources (zone write plug list head, disk error list, and disk zone_wplugs_work work struct). This also removes the functions disk_zone_wplug_set_error() and disk_zone_wplug_clear_error(). - Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write plug whenever a write opration targetting the zone of the zone write plug fails. This flag indicates that the zone write pointer offset is not reliable and that it must be updated when the next report zone, reset zone, finish zone or disk revalidation is executed. - Modify blk_zone_write_plug_bio_endio() to set the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed write BIO. - Modify the function disk_zone_wplug_set_wp_offset() to clear this new flag, thus implementing recovery of a correct write pointer offset with the reset (all) zone and finish zone operations. - Modify blkdev_report_zones() to always use the disk_report_zones_cb() callback so that disk_zone_wplug_sync_wp_offset() can be called for any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag. This implements recovery of a correct write pointer offset for zone write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within the range of the report zones operation executed by the user. - Modify blk_revalidate_seq_zone() to call disk_zone_wplug_sync_wp_offset() for all sequential write required zones when a zoned block device is revalidated, thus always resolving any inconsistency between the write pointer offset of zone write plugs and the actual write pointer position of sequential zones. | 5.5 |
Medium |
|
12h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: IDLETIMER: Fix for possible ABBA deadlock Deletion of the last rule referencing a given idletimer may happen at the same time as a read of its file in sysfs: | ====================================================== | WARNING: possible circular locking dependency detected | 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted | ------------------------------------------------------ | iptables/3303 is trying to acquire lock: | ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20 | | but task is already holding lock: | ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v] | | which lock already depends on the new lock. A simple reproducer is: | #!/bin/bash | | while true; do | iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | done & | while true; do | cat /sys/class/xt_idletimer/timers/testme >/dev/null | done Avoid this by freeing list_mutex right after deleting the element from the list, then continuing with the teardown. | 5.5 |
Medium |
|
12h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: iso: Fix circular lock in iso_listen_bis This fixes the circular locking dependency warning below, by releasing the socket lock before enterning iso_listen_bis, to avoid any potential deadlock with hdev lock. [ 75.307983] ====================================================== [ 75.307984] WARNING: possible circular locking dependency detected [ 75.307985] 6.12.0-rc6+ #22 Not tainted [ 75.307987] ------------------------------------------------------ [ 75.307987] kworker/u81:2/2623 is trying to acquire lock: [ 75.307988] ffff8fde1769da58 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO) at: iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308021] but task is already holding lock: [ 75.308022] ffff8fdd61a10078 (&hdev->lock) at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308053] which lock already depends on the new lock. [ 75.308054] the existing dependency chain (in reverse order) is: [ 75.308055] -> #1 (&hdev->lock){+.+.}-{3:3}: [ 75.308057] __mutex_lock+0xad/0xc50 [ 75.308061] mutex_lock_nested+0x1b/0x30 [ 75.308063] iso_sock_listen+0x143/0x5c0 [bluetooth] [ 75.308085] __sys_listen_socket+0x49/0x60 [ 75.308088] __x64_sys_listen+0x4c/0x90 [ 75.308090] x64_sys_call+0x2517/0x25f0 [ 75.308092] do_syscall_64+0x87/0x150 [ 75.308095] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 75.308098] -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 75.308100] __lock_acquire+0x155e/0x25f0 [ 75.308103] lock_acquire+0xc9/0x300 [ 75.308105] lock_sock_nested+0x32/0x90 [ 75.308107] iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308128] hci_connect_cfm+0x6c/0x190 [bluetooth] [ 75.308155] hci_le_per_adv_report_evt+0x27b/0x2f0 [bluetooth] [ 75.308180] hci_le_meta_evt+0xe7/0x200 [bluetooth] [ 75.308206] hci_event_packet+0x21f/0x5c0 [bluetooth] [ 75.308230] hci_rx_work+0x3ae/0xb10 [bluetooth] [ 75.308254] process_one_work+0x212/0x740 [ 75.308256] worker_thread+0x1bd/0x3a0 [ 75.308258] kthread+0xe4/0x120 [ 75.308259] ret_from_fork+0x44/0x70 [ 75.308261] ret_from_fork_asm+0x1a/0x30 [ 75.308263] other info that might help us debug this: [ 75.308264] Possible unsafe locking scenario: [ 75.308264] CPU0 CPU1 [ 75.308265] ---- ---- [ 75.308265] lock(&hdev->lock); [ 75.308267] lock(sk_lock- AF_BLUETOOTH-BTPROTO_ISO); [ 75.308268] lock(&hdev->lock); [ 75.308269] lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); [ 75.308270] *** DEADLOCK *** [ 75.308271] 4 locks held by kworker/u81:2/2623: [ 75.308272] #0: ffff8fdd66e52148 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x443/0x740 [ 75.308276] #1: ffffafb488b7fe48 ((work_completion)(&hdev->rx_work)), at: process_one_work+0x1ce/0x740 [ 75.308280] #2: ffff8fdd61a10078 (&hdev->lock){+.+.}-{3:3} at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308304] #3: ffffffffb6ba4900 (rcu_read_lock){....}-{1:2}, at: hci_connect_cfm+0x29/0x190 [bluetooth] | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: Add cancel_work_sync before module remove If we remove the module which will call mpc52xx_spi_remove it will free 'ms' through spi_unregister_controller. while the work ms->work will be used. The sequence of operations that may lead to a UAF bug. Fix it by ensuring that the work is canceled before proceeding with the cleanup in mpc52xx_spi_remove. | 7.8 |
High |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c->root is NULL as what it is initialized. __bch_btree_node_alloc() never returns NULL but c->root is possible to be NULL at above line 1721. This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't take dev_replace rwsem on task already holding it
Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of
the RAID stripe-tree, we get the following splat from lockdep:
BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started
============================================
WARNING: possible recursive locking detected
6.11.0-rc3-btrfs-for-next #599 Not tainted
--------------------------------------------
btrfs/2326 is trying to acquire lock:
ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
but task is already holding lock:
ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&fs_info->dev_replace.rwsem);
lock(&fs_info->dev_replace.rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by btrfs/2326:
#0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
stack backtrace:
CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
|
5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: check return value of ieee80211_probereq_get() for RNR The return value of ieee80211_probereq_get() might be NULL, so check it before using to avoid NULL pointer access. Addresses-Coverity-ID: 1529805 ("Dereference null return value") | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dlm: fix possible lkb_resource null dereference This patch fixes a possible null pointer dereference when this function is called from request_lock() as lkb->lkb_resource is not assigned yet, only after validate_lock_args() by calling attach_lkb(). Another issue is that a resource name could be a non printable bytearray and we cannot assume to be ASCII coded. The log functionality is probably never being hit when DLM is used in normal way and no debug logging is enabled. The null pointer dereference can only occur on a new created lkb that does not have the resource assigned yet, it probably never hits the null pointer dereference but we should be sure that other changes might not change this behaviour and we actually can hit the mentioned null pointer dereference. In this patch we just drop the printout of the resource name, the lkb id is enough to make a possible connection to a resource name if this exists. | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dma-debug: fix a possible deadlock on radix_lock radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock otherwise, there's a possible deadlock scenario when dma debug API is called holding rq_lock(): CPU0 CPU1 CPU2 dma_free_attrs() check_unmap() add_dma_entry() __schedule() //out (A) rq_lock() get_hash_bucket() (A) dma_entry_hash check_sync() (A) radix_lock() (W) dma_entry_hash dma_entry_free() (W) radix_lock() // CPU2's one (W) rq_lock() CPU1 situation can happen when it extending radix tree and it tries to wake up kswapd via wake_all_kswapd(). CPU2 situation can happen while perf_event_task_sched_out() (i.e. dma sync operation is called while deleting perf_event using etm and etr tmc which are Arm Coresight hwtracing driver backends). To remove this possible situation, call dma_entry_free() after put_hash_bucket() in check_unmap(). | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pinmux: Use sequential access to access desc->pinmux data When two client of the same gpio call pinctrl_select_state() for the same functionality, we are seeing NULL pointer issue while accessing desc->mux_owner. Let's say two processes A, B executing in pin_request() for the same pin and process A updates the desc->mux_usecount but not yet updated the desc->mux_owner while process B see the desc->mux_usecount which got updated by A path and further executes strcmp and while accessing desc->mux_owner it crashes with NULL pointer. Serialize the access to mux related setting with a mutex lock. cpu0 (process A) cpu1(process B) pinctrl_select_state() { pinctrl_select_state() { pin_request() { pin_request() { ... .... } else { desc->mux_usecount++; desc->mux_usecount && strcmp(desc->mux_owner, owner)) { if (desc->mux_usecount > 1) return 0; desc->mux_owner = owner; } } | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when the ring is being stopped. Depending on timing between ring stop request completion, interrupt handler removal and code execution this may lead to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run after the io_data pointer is set to NULL in hci_dma_cleanup(). Prevent this my masking the ring interrupts before ring stop request. | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac | 5.5 |
Medium |
|
17h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: soc: imx8m: Probe the SoC driver as platform driver With driver_async_probe=* on kernel command line, the following trace is produced because on i.MX8M Plus hardware because the soc-imx8m.c driver calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock driver is not yet probed. This was not detected during regular testing without driver_async_probe. Convert the SoC code to platform driver and instantiate a platform device in its current device_initcall() to probe the platform driver. Rework .soc_revision callback to always return valid error code and return SoC revision via parameter. This way, if anything in the .soc_revision callback return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get retried later. " ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603 Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : imx8mm_soc_revision+0xdc/0x180 lr : imx8mm_soc_revision+0xd0/0x180 sp : ffff8000821fbcc0 x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120 x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311 x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8 x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801 x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3 x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb Call trace: imx8mm_soc_revision+0xdc/0x180 imx8_soc_init+0xb0/0x1e0 do_one_initcall+0x94/0x1a8 kernel_init_freeable+0x240/0x2a8 kernel_init+0x28/0x140 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- SoC: i.MX8MP revision 1.1 " | 5.5 |
Medium |
|
17h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: put bpf_link's program when link is safe to be deallocated In general, BPF link's underlying BPF program should be considered to be reachable through attach hook -> link -> prog chain, and, pessimistically, we have to assume that as long as link's memory is not safe to free, attach hook's code might hold a pointer to BPF program and use it. As such, it's not (generally) correct to put link's program early before waiting for RCU GPs to go through. More eager bpf_prog_put() that we currently do is mostly correct due to BPF program's release code doing similar RCU GP waiting, but as will be shown in the following patches, BPF program can be non-sleepable (and, thus, reliant on only "classic" RCU GP), while BPF link's attach hook can have sleepable semantics and needs to be protected by RCU Tasks Trace, and for such cases BPF link has to go through RCU Tasks Trace + "classic" RCU GPs before being deallocated. And so, if we put BPF program early, we might free BPF program before we free BPF link, leading to use-after-free situation. So, this patch defers bpf_prog_put() until we are ready to perform bpf_link's deallocation. At worst, this delays BPF program freeing by one extra RCU GP, but that seems completely acceptable. Alternatively, we'd need more elaborate ways to determine BPF hook, BPF link, and BPF program lifetimes, and how they relate to each other, which seems like an unnecessary complication. Note, for most BPF links we still will perform eager bpf_prog_put() and link dealloc, so for those BPF links there are no observable changes whatsoever. Only BPF links that use deferred dealloc might notice slightly delayed freeing of BPF programs. Also, to reduce code and logic duplication, extract program put + link dealloc logic into bpf_link_dealloc() helper. | 7.8 |
High |
|
17h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a Fix the dtc warnings: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"): WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0 Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0 The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a"), which has fixed the issue for ls2k (despite its subject mentions ls7a). | 5.5 |
Medium |
|
17h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adding array index check to prevent memory corruption [Why & How] Array indices out of bound caused memory corruption. Adding checks to ensure that array index stays in bound. | 7.8 |
High |
|
17h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to restrict this maximum depth to a more reasonable value not to harm performance. Remove unnecessary WARN_ON_ONCE which is reachable from userspace. | 5.5 |
Medium |
|
17h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration() acpi_dev_hid_match() does not check for adev == NULL, dereferencing it unconditional. Add a check for adev being NULL before calling acpi_dev_hid_match(). At the moment acpi_quirk_skip_serdev_enumeration() is never called with a controller_parent without an ACPI companion, but better safe than sorry. | 5.5 |
Medium |
|
17h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: powerpc/prom_init: Fixup missing powermac #size-cells On some powermacs `escc` nodes are missing `#size-cells` properties, which is deprecated and now triggers a warning at boot since commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"). For example: Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000 WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108 Hardware name: PowerMac3,1 7400 0xc0209 PowerMac ... Call Trace: of_bus_n_size_cells+0x98/0x108 (unreliable) of_bus_default_count_cells+0x40/0x60 __of_get_address+0xc8/0x21c __of_address_to_resource+0x5c/0x228 pmz_init_port+0x5c/0x2ec pmz_probe.isra.0+0x144/0x1e4 pmz_console_init+0x10/0x48 console_init+0xcc/0x138 start_kernel+0x5c4/0x694 As powermacs boot via prom_init it's possible to add the missing properties to the device tree during boot, avoiding the warning. Note that `escc-legacy` nodes are also missing `#size-cells` properties, but they are skipped by the macio driver, so leave them alone. Depends-on: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling") | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: quota: flush quota_release_work upon quota writeback One of the paths quota writeback is called from is: freeze_super() sync_filesystem() ext4_sync_fs() dquot_writeback_dquots() Since we currently don't always flush the quota_release_work queue in this path, we can end up with the following race: 1. dquot are added to releasing_dquots list during regular operations. 2. FS Freeze starts, however, this does not flush the quota_release_work queue. 3. Freeze completes. 4. Kernel eventually tries to flush the workqueue while FS is frozen which hits a WARN_ON since transaction gets started during frozen state: ext4_journal_check_start+0x28/0x110 [ext4] (unreliable) __ext4_journal_start_sb+0x64/0x1c0 [ext4] ext4_release_dquot+0x90/0x1d0 [ext4] quota_release_workfn+0x43c/0x4d0 Which is the following line: WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE); Which ultimately results in generic/390 failing due to dmesg noise. This was detected on powerpc machine 15 cores. To avoid this, make sure to flush the workqueue during dquot_writeback_dquots() so we dont have any pending workitems after freeze. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur
The action force umount(umount -f) will attempt to kill all rpc_task even
umount operation may ultimately fail if some files remain open.
Consequently, if an action attempts to open a file, it can potentially
send two rpc_task to nfs server.
NFS CLIENT
thread1 thread2
open("file")
...
nfs4_do_open
_nfs4_do_open
_nfs4_open_and_get_state
_nfs4_proc_open
nfs4_run_open_task
/* rpc_task1 */
rpc_run_task
rpc_wait_for_completion_task
umount -f
nfs_umount_begin
rpc_killall_tasks
rpc_signal_task
rpc_task1 been wakeup
and return -512
_nfs4_do_open // while loop
...
nfs4_run_open_task
/* rpc_task2 */
rpc_run_task
rpc_wait_for_completion_task
While processing an open request, nfsd will first attempt to find or
allocate an nfs4_openowner. If it finds an nfs4_openowner that is not
marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since
two rpc_task can attempt to open the same file simultaneously from the
client to server, and because two instances of nfsd can run
concurrently, this situation can lead to lots of memory leak.
Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be
triggered.
NFS SERVER
nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// alloc oo1, stateid1
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// find oo1, without NFS4_OO_CONFIRMED
release_openowner
unhash_openowner_locked
list_del_init(&oo->oo_perclient)
// cannot find this oo
// from client, LEAK!!!
alloc_stateowner // alloc oo2
nfsd4_process_open2
init_open_stateid
// associate oo1
// with stateid1, stateid1 LEAK!!!
nfs4_get_vfs_file
// alloc nfsd_file1 and nfsd_file_mark1
// all LEAK!!!
nfsd4_process_open2
...
write_threads
...
nfsd_destroy_serv
nfsd_shutdown_net
nfs4_state_shutdown_net
nfs4_state_destroy_net
destroy_client
__destroy_client
// won't find oo1!!!
nfsd_shutdown_generic
nfsd_file_cache_shutdown
kmem_cache_destroy
for nfsd_file_slab
and nfsd_file_mark_slab
// bark since nfsd_file1
// and nfsd_file_mark1
// still alive
=======================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
-----------------------------------------------------------------------
Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28
flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
|
5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers in sti_hqvdp_atomic_check The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix handling of plane refcount [Why] The mechanism to backup and restore plane states doesn't maintain refcount, which can cause issues if the refcount of the plane changes in between backup and restore operations, such as memory leaks if the refcount was supposed to go down, or double frees / invalid memory accesses if the refcount was supposed to go up. [How] Cache and re-apply current refcount when restoring plane states. | 7.8 |
High |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: add a sanity check for btrfs root in btrfs_search_slot() Syzbot reports a null-ptr-deref in btrfs_search_slot(). The reproducer is using rescue=ibadroots, and the extent tree root is corrupted thus the extent tree is NULL. When scrub tries to search the extent tree to gather the needed extent info, btrfs_search_slot() doesn't check if the target root is NULL or not, resulting the null-ptr-deref. Add sanity check for btrfs root before using it in btrfs_search_slot(). | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: kunit: Fix potential null dereference in kunit_device_driver_test() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add a NULL check for test_state. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: kunit: string-stream: Fix a UAF bug in kunit_init_suite() In kunit_debugfs_create_suite(), if alloc_string_stream() fails in the kunit_suite_for_each_test_case() loop, the "suite->log = stream" has assigned before, and the error path only free the suite->log's stream memory but not set it to NULL, so the later string_stream_clear() of suite->log in kunit_init_suite() will cause below UAF bug. Set stream pointer to NULL after free to fix it. Unable to handle kernel paging request at virtual address 006440150000030d Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [006440150000030d] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: iio_test_gts industrialio_gts_helper cfg80211 rfkill ipv6 [last unloaded: iio_test_gts] CPU: 5 UID: 0 PID: 6253 Comm: modprobe Tainted: G B W N 6.12.0-rc4+ #458 Tainted: [B]=BAD_PAGE, [W]=WARN, [N]=TEST Hardware name: linux,dummy-virt (DT) pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : string_stream_clear+0x54/0x1ac lr : string_stream_clear+0x1a8/0x1ac sp : ffffffc080b47410 x29: ffffffc080b47410 x28: 006440550000030d x27: ffffff80c96b5e98 x26: ffffff80c96b5e80 x25: ffffffe461b3f6c0 x24: 0000000000000003 x23: ffffff80c96b5e88 x22: 1ffffff019cdf4fc x21: dfffffc000000000 x20: ffffff80ce6fa7e0 x19: 032202a80000186d x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffe45c355cb4 x14: ffffffe45c35589c x13: ffffffe45c03da78 x12: ffffffb810168e75 x11: 1ffffff810168e74 x10: ffffffb810168e74 x9 : dfffffc000000000 x8 : 0000000000000004 x7 : 0000000000000003 x6 : 0000000000000001 x5 : ffffffc080b473a0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffffffe462fbf620 x0 : dfffffc000000000 Call trace: string_stream_clear+0x54/0x1ac __kunit_test_suites_init+0x108/0x1d8 kunit_exec_run_tests+0xb8/0x100 kunit_module_notify+0x400/0x55c notifier_call_chain+0xfc/0x3b4 blocking_notifier_call_chain+0x68/0x9c do_init_module+0x24c/0x5c8 load_module+0x4acc/0x4e90 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2d4/0x57c __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f9400753 d2dff800 f2fbffe0 d343fe7c (38e06b80) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception | 7.8 |
High |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information These four chips: * W25N512GW * W25N01GW * W25N01JW * W25N02JW all require a single bit of ECC strength and thus feature an on-die Hamming-like ECC engine. There is no point in filling a ->get_status() callback for them because the main ECC status bytes are located in standard places, and retrieving the number of bitflips in case of corrected chunk is both useless and unsupported (if there are bitflips, then there is 1 at most, so no need to query the chip for that). Without this change, a kernel warning triggers every time a bit flips. | 5.5 |
Medium |
|
16h36 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/sched: netem: account for backlog updates from child qdisc
In general, 'qlen' of any classful qdisc should keep track of the
number of packets that the qdisc itself and all of its children holds.
In case of netem, 'qlen' only accounts for the packets in its internal
tfifo. When netem is used with a child qdisc, the child qdisc can use
'qdisc_tree_reduce_backlog' to inform its parent, netem, about created
or dropped SKBs. This function updates 'qlen' and the backlog statistics
of netem, but netem does not account for changes made by a child qdisc.
'qlen' then indicates the wrong number of packets in the tfifo.
If a child qdisc creates new SKBs during enqueue and informs its parent
about this, netem's 'qlen' value is increased. When netem dequeues the
newly created SKBs from the child, the 'qlen' in netem is not updated.
If 'qlen' reaches the configured sch->limit, the enqueue function stops
working, even though the tfifo is not full.
Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configure netem as root
qdisc and tbf as its child on the outgoing interface of the machine
as follows:
$ tc qdisc add dev |
5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg Syzbot reports [1] an uninitialized value issue found by KMSAN in dib3000_read_reg(). Local u8 rb[2] is used in i2c_transfer() as a read buffer; in case that call fails, the buffer may end up with some undefined values. Since no elaborate error handling is expected in dib3000_write_reg(), simply zero out rb buffer to mitigate the problem. [1] Syzkaller report dvb-usb: bulk message failed: -22 (6/0) ===================================================== BUG: KMSAN: uninit-value in dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 dibusb_dib3000mb_frontend_attach+0x155/0x2f0 drivers/media/usb/dvb-usb/dibusb-mb.c:31 dvb_usb_adapter_frontend_init+0xed/0x9a0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:90 [inline] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:186 [inline] dvb_usb_device_init+0x25a8/0x3760 drivers/media/usb/dvb-usb/dvb-usb-init.c:310 dibusb_probe+0x46/0x250 drivers/media/usb/dvb-usb/dibusb-mb.c:110 ... Local variable rb created at: dib3000_read_reg+0x86/0x4e0 drivers/media/dvb-frontends/dib3000mb.c:54 dib3000mb_attach+0x123/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 ... | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP disabled can trigger the following bug, as pcpu_hot is unavailable: [ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c [ 8.471849] #PF: supervisor read access in kernel mode [ 8.471881] #PF: error_code(0x0000) - not-present page Fix by inlining a return 0 in the !CONFIG_SMP case. | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dmaengine: at_xdmac: avoid null_prt_deref in at_xdmac_prep_dma_memset The at_xdmac_memset_create_desc may return NULL, which will lead to a null pointer dereference. For example, the len input is error, or the atchan->free_descs_list is empty and memory is exhausted. Therefore, add check to avoid this. | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/vas: Add close() callback in vas_vm_ops struct The mapping VMA address is saved in VAS window struct when the paste address is mapped. This VMA address is used during migration to unmap the paste address if the window is active. The paste address mapping will be removed when the window is closed or with the munmap(). But the VMA address in the VAS window is not updated with munmap() which is causing invalid access during migration. The KASAN report shows: [16386.254991] BUG: KASAN: slab-use-after-free in reconfig_close_windows+0x1a0/0x4e8 [16386.255043] Read of size 8 at addr c00000014a819670 by task drmgr/696928 [16386.255096] CPU: 29 UID: 0 PID: 696928 Comm: drmgr Kdump: loaded Tainted: G B 6.11.0-rc5-nxgzip #2 [16386.255128] Tainted: [B]=BAD_PAGE [16386.255148] Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.00 (NH1110_016) hv:phyp pSeries [16386.255181] Call Trace: [16386.255202] [c00000016b297660] [c0000000018ad0ac] dump_stack_lvl+0x84/0xe8 (unreliable) [16386.255246] [c00000016b297690] [c0000000006e8a90] print_report+0x19c/0x764 [16386.255285] [c00000016b297760] [c0000000006e9490] kasan_report+0x128/0x1f8 [16386.255309] [c00000016b297880] [c0000000006eb5c8] __asan_load8+0xac/0xe0 [16386.255326] [c00000016b2978a0] [c00000000013f898] reconfig_close_windows+0x1a0/0x4e8 [16386.255343] [c00000016b297990] [c000000000140e58] vas_migration_handler+0x3a4/0x3fc [16386.255368] [c00000016b297a90] [c000000000128848] pseries_migrate_partition+0x4c/0x4c4 ... [16386.256136] Allocated by task 696554 on cpu 31 at 16377.277618s: [16386.256149] kasan_save_stack+0x34/0x68 [16386.256163] kasan_save_track+0x34/0x80 [16386.256175] kasan_save_alloc_info+0x58/0x74 [16386.256196] __kasan_slab_alloc+0xb8/0xdc [16386.256209] kmem_cache_alloc_noprof+0x200/0x3d0 [16386.256225] vm_area_alloc+0x44/0x150 [16386.256245] mmap_region+0x214/0x10c4 [16386.256265] do_mmap+0x5fc/0x750 [16386.256277] vm_mmap_pgoff+0x14c/0x24c [16386.256292] ksys_mmap_pgoff+0x20c/0x348 [16386.256303] sys_mmap+0xd0/0x160 ... [16386.256350] Freed by task 0 on cpu 31 at 16386.204848s: [16386.256363] kasan_save_stack+0x34/0x68 [16386.256374] kasan_save_track+0x34/0x80 [16386.256384] kasan_save_free_info+0x64/0x10c [16386.256396] __kasan_slab_free+0x120/0x204 [16386.256415] kmem_cache_free+0x128/0x450 [16386.256428] vm_area_free_rcu_cb+0xa8/0xd8 [16386.256441] rcu_do_batch+0x2c8/0xcf0 [16386.256458] rcu_core+0x378/0x3c4 [16386.256473] handle_softirqs+0x20c/0x60c [16386.256495] do_softirq_own_stack+0x6c/0x88 [16386.256509] do_softirq_own_stack+0x58/0x88 [16386.256521] __irq_exit_rcu+0x1a4/0x20c [16386.256533] irq_exit+0x20/0x38 [16386.256544] interrupt_async_exit_prepare.constprop.0+0x18/0x2c ... [16386.256717] Last potentially related work creation: [16386.256729] kasan_save_stack+0x34/0x68 [16386.256741] __kasan_record_aux_stack+0xcc/0x12c [16386.256753] __call_rcu_common.constprop.0+0x94/0xd04 [16386.256766] vm_area_free+0x28/0x3c [16386.256778] remove_vma+0xf4/0x114 [16386.256797] do_vmi_align_munmap.constprop.0+0x684/0x870 [16386.256811] __vm_munmap+0xe0/0x1f8 [16386.256821] sys_munmap+0x54/0x6c [16386.256830] system_call_exception+0x1a0/0x4a0 [16386.256841] system_call_vectored_common+0x15c/0x2ec [16386.256868] The buggy address belongs to the object at c00000014a819670 which belongs to the cache vm_area_struct of size 168 [16386.256887] The buggy address is located 0 bytes inside of freed 168-byte region [c00000014a819670, c00000014a819718) [16386.256915] The buggy address belongs to the physical page: [16386.256928] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a81 [16386.256950] memcg:c0000000ba430001 [16386.256961] anon flags: 0x43ffff800000000(node=4|zone=0|lastcpupid=0x7ffff) [16386.256975] page_type: 0xfdffffff(slab) [16386 ---truncated--- | 7.8 |
High |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ublk: detach gendisk from ublk device if add_disk() fails Inside ublk_abort_requests(), gendisk is grabbed for aborting all inflight requests. And ublk_abort_requests() is called when exiting the uring context or handling timeout. If add_disk() fails, the gendisk may have been freed when calling ublk_abort_requests(), so use-after-free can be caused when getting disk's reference in ublk_abort_requests(). Fixes the bug by detaching gendisk from ublk device if add_disk() fails. | 7.8 |
High |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent bad count for tracing_cpumask_write If a large count is provided, it will trigger a warning in bitmap_parse_user. Also check zero for it. | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/fred: Clear WFE in missing-ENDBRANCH #CPs An indirect branch instruction sets the CPU indirect branch tracker (IBT) into WAIT_FOR_ENDBRANCH (WFE) state and WFE stays asserted across the instruction boundary. When the decoder finds an inappropriate instruction while WFE is set ENDBR, the CPU raises a #CP fault. For the "kernel IBT no ENDBR" selftest where #CPs are deliberately triggered, the WFE state of the interrupted context needs to be cleared to let execution continue. Otherwise when the CPU resumes from the instruction that just caused the previous #CP, another missing-ENDBRANCH #CP is raised and the CPU enters a dead loop. This is not a problem with IDT because it doesn't preserve WFE and IRET doesn't set WFE. But FRED provides space on the entry stack (in an expanded CS area) to save and restore the WFE state, thus the WFE state is no longer clobbered, so software must clear it. Clear WFE to avoid dead looping in ibt_clear_fred_wfe() and the !ibt_fatal code path when execution is allowed to continue. Clobbering WFE in any other circumstance is a security-relevant bug. [ dhansen: changelog rewording ] | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI/MSI: Handle lack of irqdomain gracefully Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a RISCV platform which does not provide PCI/MSI support: WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32 __pci_enable_msix_range+0x30c/0x596 pci_msi_setup_msi_irqs+0x2c/0x32 pci_alloc_irq_vectors_affinity+0xb8/0xe2 RISCV uses hierarchical interrupt domains and correctly does not implement the legacy fallback. The warning triggers from the legacy fallback stub. That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent domain is associated with the device or not. There is a check for MSI-X, which has a legacy assumption. But that legacy fallback assumption is only valid when legacy support is enabled, but otherwise the check should simply return -ENOTSUPP. Loongarch tripped over the same problem and blindly enabled legacy support without implementing the legacy fallbacks. There are weak implementations which return an error, so the problem was papered over. Correct pci_msi_domain_supports() to evaluate the legacy mode and add the missing supported check into the MSI enable path to complete it. | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free when COWing tree bock and tracing is enabled When a COWing a tree block, at btrfs_cow_block(), and we have the tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled (CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent buffer while inside the tracepoint code. This is because in some paths that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding the last reference on the extent buffer @buf so btrfs_force_cow_block() drops the last reference on the @buf extent buffer when it calls free_extent_buffer_stale(buf), which schedules the release of the extent buffer with RCU. This means that if we are on a kernel with preemption, the current task may be preempted before calling trace_btrfs_cow_block() and the extent buffer already released by the time trace_btrfs_cow_block() is called, resulting in a use-after-free. Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to btrfs_force_cow_block() before the COWed extent buffer is freed. This also has a side effect of invoking the tracepoint in the tree defrag code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is called there, but this is fine and it was actually missing there. | 7.8 |
High |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: check folio mapping after unlock in relocate_one_folio()
When we call btrfs_read_folio() to bring a folio uptodate, we unlock the
folio. The result of that is that a different thread can modify the
mapping (like remove it with invalidate) before we call folio_lock().
This results in an invalid page and we need to try again.
In particular, if we are relocating concurrently with aborting a
transaction, this can result in a crash like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 76 PID: 1411631 Comm: kworker/u322:5
Workqueue: events_unbound btrfs_reclaim_bgs_work
RIP: 0010:set_page_extent_mapped+0x20/0xb0
RSP: 0018:ffffc900516a7be8 EFLAGS: 00010246
RAX: ffffea009e851d08 RBX: ffffea009e0b1880 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffc900516a7b90 RDI: ffffea009e0b1880
RBP: 0000000003573000 R08: 0000000000000001 R09: ffff88c07fd2f3f0
R10: 0000000000000000 R11: 0000194754b575be R12: 0000000003572000
R13: 0000000003572fff R14: 0000000000100cca R15: 0000000005582fff
FS: 0000000000000000(0000) GS:ffff88c07fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000407d00f002 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: add intf release flow when usb disconnect MediaTek claim an special usb intr interface for ISO data transmission. The interface need to be released before unregistering hci device when usb disconnect. Removing BT usb dongle without properly releasing the interface may cause Kernel panic while unregister hci device. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix freeing of the HMB descriptor table The HMB descriptor table is sized to the maximum number of descriptors that could be used for a given device, but __nvme_alloc_host_mem could break out of the loop earlier on memory allocation failure and end up using less descriptors than planned for, which leads to an incorrect size passed to dma_free_coherent. In practice this was not showing up because the number of descriptors tends to be low and the dma coherent allocator always allocates and frees at least a page. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING In fscache_create_volume(), there is a missing memory barrier between the bit-clearing operation and the wake-up operation. This may cause a situation where, after a wake-up, the bit-clearing operation hasn't been detected yet, leading to an indefinite wait. The triggering process is as follows: [cookie1] [cookie2] [volume_work] fscache_perform_lookup fscache_create_volume fscache_perform_lookup fscache_create_volume fscache_create_volume_work cachefiles_acquire_volume clear_and_wake_up_bit test_and_set_bit test_and_set_bit goto maybe_wait goto no_wait In the above process, cookie1 and cookie2 has the same volume. When cookie1 enters the -no_wait- process, it will clear the bit and wake up the waiting process. If a barrier is missing, it may cause cookie2 to remain in the -wait- process indefinitely. In commit 3288666c7256 ("fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()"), barriers were added to similar operations in fscache_create_volume_work(), but fscache_create_volume() was missed. By combining the clear and wake operations into clear_and_wake_up_bit() to fix this issue. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: crypto: caam - Fix the pointer passed to caam_qi_shutdown() The type of the last parameter given to devm_add_action_or_reset() is "struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to "struct device *". Pass the correct parameter to devm_add_action_or_reset() so that the resources are released as expected. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: Add Cleaner Shader Deinitialization in gfx_v9_0 Module This commit addresses an omission in the previous patch related to the cleaner shader support for GFX9 hardware. Specifically, it adds the necessary deinitialization code for the cleaner shader in the gfx_v9_0_sw_fini function. The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any allocated resources for the cleaner shader are freed correctly, avoiding potential memory leaks and ensuring that the GPU state is clean for the next initialization sequence. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new() When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex before returning the error. Fixes smatch warning: drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ipv6: release nexthop on device removal The CI is hitting some aperiodic hangup at device removal time in the pmtu.sh self-test: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6 ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at dst_init+0x84/0x4a0 dst_alloc+0x97/0x150 ip6_dst_alloc+0x23/0x90 ip6_rt_pcpu_alloc+0x1e6/0x520 ip6_pol_route+0x56f/0x840 fib6_rule_lookup+0x334/0x630 ip6_route_output_flags+0x259/0x480 ip6_dst_lookup_tail.constprop.0+0x5c2/0x940 ip6_dst_lookup_flow+0x88/0x190 udp_tunnel6_dst_lookup+0x2a7/0x4c0 vxlan_xmit_one+0xbde/0x4a50 [vxlan] vxlan_xmit+0x9ad/0xf20 [vxlan] dev_hard_start_xmit+0x10e/0x360 __dev_queue_xmit+0xf95/0x18c0 arp_solicit+0x4a2/0xe00 neigh_probe+0xaa/0xf0 While the first suspect is the dst_cache, explicitly tracking the dst owing the last device reference via probes proved such dst is held by the nexthop in the originating fib6_info. Similar to commit f5b51fe804ec ("ipv6: route: purge exception on removal"), we need to explicitly release the originating fib info when disconnecting a to-be-removed device from a live ipv6 dst: move the fib6_info cleanup into ip6_dst_ifdown(). Tested running: ./pmtu.sh cleanup_ipv6_exception in a tight loop for more than 400 iterations with no spat, running an unpatched kernel I observed a splat every ~10 iterations. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: erofs: fix blksize < PAGE_SIZE for file-backed mounts Adjust sb->s_blocksize{,_bits} directly for file-backed mounts when the fs block size is smaller than PAGE_SIZE. Previously, EROFS used sb_set_blocksize(), which caused a panic if bdev-backed mounts is not used. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dlm: fix dlm_recover_members refcount on error If dlm_recover_members() fails we don't drop the references of the previous created root_list that holds and keep all rsbs alive during the recovery. It might be not an unlikely event because ping_members() could run into an -EINTR if another recovery progress was triggered again. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() Hook "qed_ops->common->sb_init = qed_sb_init" does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb() Hook "qedi_ops->common->sb_init = qed_sb_init" does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem() When information such as info->screen_base is not ready, calling sh7760fb_free_mem() does not release memory correctly. Call dma_free_coherent() instead. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI: Fix reset_method_store() memory leak In reset_method_store(), a string is allocated via kstrndup() and assigned to the local "options". options is then used in with strsep() to find spaces: while ((name = strsep(&options, " ")) != NULL) { If there are no remaining spaces, then options is set to NULL by strsep(), so the subsequent kfree(options) doesn't free the memory allocated via kstrndup(). Fix by using a separate tmp_options to iterate with strsep() so options is preserved. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadlock in f2fs_record_stop_reason() syzbot reports deadlock issue of f2fs as below: ====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc3-syzkaller-00087-gc964ced77262 #0 Not tainted ------------------------------------------------------ kswapd0/79 is trying to acquire lock: ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_down_write fs/f2fs/f2fs.h:2199 [inline] ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_record_stop_reason+0x52/0x1d0 fs/f2fs/super.c:4068 but task is already holding lock: ffff88804bd92610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (sb_internal#2){.+.+}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write include/linux/fs.h:1716 [inline] sb_start_intwrite+0x4d/0x1c0 include/linux/fs.h:1899 f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842 evict+0x4e8/0x9b0 fs/inode.c:725 f2fs_evict_inode+0x1a4/0x15c0 fs/f2fs/inode.c:807 evict+0x4e8/0x9b0 fs/inode.c:725 dispose_list fs/inode.c:774 [inline] prune_icache_sb+0x239/0x2f0 fs/inode.c:963 super_cache_scan+0x38c/0x4b0 fs/super.c:223 do_shrink_slab+0x701/0x1160 mm/shrinker.c:435 shrink_slab+0x1093/0x14d0 mm/shrinker.c:662 shrink_one+0x43b/0x850 mm/vmscan.c:4818 shrink_many mm/vmscan.c:4879 [inline] lru_gen_shrink_node mm/vmscan.c:4957 [inline] shrink_node+0x3799/0x3de0 mm/vmscan.c:5937 kswapd_shrink_node mm/vmscan.c:6765 [inline] balance_pgdat mm/vmscan.c:6957 [inline] kswapd+0x1ca3/0x3700 mm/vmscan.c:7226 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #1 (fs_reclaim){+.+.}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __fs_reclaim_acquire mm/page_alloc.c:3834 [inline] fs_reclaim_acquire+0x88/0x130 mm/page_alloc.c:3848 might_alloc include/linux/sched/mm.h:318 [inline] prepare_alloc_pages+0x147/0x5b0 mm/page_alloc.c:4493 __alloc_pages_noprof+0x16f/0x710 mm/page_alloc.c:4722 alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265 alloc_pages_noprof mm/mempolicy.c:2345 [inline] folio_alloc_noprof+0x128/0x180 mm/mempolicy.c:2352 filemap_alloc_folio_noprof+0xdf/0x500 mm/filemap.c:1010 do_read_cache_folio+0x2eb/0x850 mm/filemap.c:3787 read_mapping_folio include/linux/pagemap.h:1011 [inline] f2fs_commit_super+0x3c0/0x7d0 fs/f2fs/super.c:4032 f2fs_record_stop_reason+0x13b/0x1d0 fs/f2fs/super.c:4079 f2fs_handle_critical_error+0x2ac/0x5c0 fs/f2fs/super.c:4174 f2fs_write_inode+0x35f/0x4d0 fs/f2fs/inode.c:785 write_inode fs/fs-writeback.c:1503 [inline] __writeback_single_inode+0x711/0x10d0 fs/fs-writeback.c:1723 writeback_single_inode+0x1f3/0x660 fs/fs-writeback.c:1779 sync_inode_metadata+0xc4/0x120 fs/fs-writeback.c:2849 f2fs_release_file+0xa8/0x100 fs/f2fs/file.c:1941 __fput+0x23f/0x880 fs/file_table.c:431 task_work_run+0x24f/0x310 kernel/task_work.c:228 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x168/0x370 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f ---truncated--- | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
nfs_common: must not hold RCU while calling nfsd_file_put_local
Move holding the RCU from nfs_to_nfsd_file_put_local to
nfs_to_nfsd_net_put. It is the call to nfs_to->nfsd_serv_put that
requires the RCU anyway (the puts for nfsd_file and netns were
combined to avoid an extra indirect reference but that
micro-optimization isn't possible now).
This fixes xfstests generic/013 and it triggering:
"Voluntary context switch within RCU read-side critical section!"
[ 143.545738] Call Trace:
[ 143.546206] |
5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages() Fix an unwind issue in mlx5vf_add_migration_pages(). If a set of pages is allocated but fails to be added to the SG table, they need to be freed to prevent a memory leak. Any pages successfully added to the SG table will be freed as part of mlx5vf_free_data_buffer(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: apparmor: test: Fix memory leak for aa_unpack_strdup() The string allocated by kmemdup() in aa_unpack_strdup() is not freed and cause following memory leaks, free them to fix it. unreferenced object 0xffffff80c6af8a50 (size 8): comm "kunit_try_catch", pid 225, jiffies 4294894407 hex dump (first 8 bytes): 74 65 73 74 69 6e 67 00 testing. backtrace (crc 5eab668b): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000006e6c7776>] __kmalloc_node_track_caller_noprof+0x300/0x3e0 [<000000006870467c>] kmemdup_noprof+0x34/0x60 [<000000001176bb03>] aa_unpack_strdup+0xd0/0x18c [<000000008ecde918>] policy_unpack_test_unpack_strdup_with_null_name+0xf8/0x3ec [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80c2a29090 (size 8): comm "kunit_try_catch", pid 227, jiffies 4294894409 hex dump (first 8 bytes): 74 65 73 74 69 6e 67 00 testing. backtrace (crc 5eab668b): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000006e6c7776>] __kmalloc_node_track_caller_noprof+0x300/0x3e0 [<000000006870467c>] kmemdup_noprof+0x34/0x60 [<000000001176bb03>] aa_unpack_strdup+0xd0/0x18c [<0000000046a45c1a>] policy_unpack_test_unpack_strdup_with_name+0xd0/0x3c4 [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfs/localio: must clear res.replen in nfs_local_read_done Otherwise memory corruption can occur due to NFSv3 LOCALIO reads leaving garbage in res.replen: - nfs3_read_done() copies that into server->read_hdrsize; from there nfs3_proc_read_setup() copies it to args.replen in new requests. - nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages() which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf contains a ridiculous len. - This is copied to rq_private_buf and xs_read_stream_request() eventually passes the kvec to sock_recvmsg() which receives incoming data into entirely the wrong place. This is easily reproduced with NFSv3 LOCALIO that is servicing reads when it is made to pivot back to using normal RPC. This switch back to using normal NFSv3 with RPC can occur for a few reasons but this issue was exposed with a test that stops and then restarts the NFSv3 server while LOCALIO is performing heavy read IO. | 7.8 |
High |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: rtc: check if __rtc_read_time was successful in rtc_timer_do_work() If the __rtc_read_time call fails,, the struct rtc_time tm; may contain uninitialized data, or an illegal date/time read from the RTC hardware. When calling rtc_tm_to_ktime later, the result may be a very large value (possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue, they will continually expire, may causing kernel softlockup. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: fix handling of the failed kzalloc() memory allocation On the linux-next, next-20241108 vanilla kernel, the coccinelle tool gave the following error report: ./net/9p/trans_usbg.c:912:5-11: ERROR: allocation function on line 911 returns NULL not ERR_PTR on failure kzalloc() failure is fixed to handle the NULL return case on the memory exhaustion. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: smb: Initialize cfid->tcon before performing network ops Avoid leaking a tcon ref when a lease break races with opening the cached directory. Processing the leak break might take a reference to the tcon in cached_dir_lease_break() and then fail to release the ref in cached_dir_offload_close, since cfid->tcon is still NULL. | 4.7 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c Add error pointer check after calling otx2_mbox_get_rsp(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c Adding error pointer check after calling otx2_mbox_get_rsp(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in cn10k.c Add error pointer check after calling otx2_mbox_get_rsp(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.c Add error pointer check after calling otx2_mbox_get_rsp(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. | 5.5 |
Medium |
|
11h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix cpu stuck caused by printings during reset During reset, cmd to destroy resources such as qp, cq, and mr may fail, and error logs will be printed. When a large number of resources are destroyed, there will be lots of printings, and it may lead to a cpu stuck. Delete some unnecessary printings and replace other printing functions in these paths with the ratelimited version. | 5.5 |
Medium |
|
11h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Terminate the erratum_1386_microcode array The erratum_1386_microcode array requires an empty entry at the end. Otherwise x86_match_cpu_with_stepping() will continue iterate the array after it ended. Add an empty entry to erratum_1386_microcode to its end. | 7.1 |
High |
|
11h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Several fixes to bpf_msg_pop_data Several fixes to bpf_msg_pop_data, 1. In sk_msg_shift_left, we should put_page 2. if (len == 0), return early is better 3. pop the entire sk_msg (last == msg->sg.size) should be supported 4. Fix for the value of variable "a" 5. In sk_msg_shift_left, after shifting, i has already pointed to the next element. Addtional sk_msg_iter_var_next may result in BUG. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO DMA API usage causing oops Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s members to be later in stmmac_tso_xmit(). The buf (dma cookie) and len stored in this structure are passed to dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that the dma cookie passed to dma_unmap_single() is the same as the value returned from dma_map_single(). However, by moving the assignment later, this is not the case when priv->dma_cap.addr64 > 32 as "des" is offset by proto_hdr_len. This causes problems such as: dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed and with DMA_API_DEBUG enabled: DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes] Fix this by maintaining "des" as the original DMA cookie, and use tso_des to pass the offset DMA cookie to stmmac_tso_allocator(). Full details of the crashes can be found at: https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/smc: protect link down work from execute after lgr freed link down work may be scheduled before lgr freed but execute after lgr freed, which may result in crash. So it is need to hold a reference before shedule link down work, and put the reference after work executed or canceled. The relevant crash call stack as follows: list_del corruption. prev->next should be ffffb638c9c0fe20, but was 0000000000000000 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:51! invalid opcode: 0000 [#1] SMP NOPTI CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014 Workqueue: events smc_link_down_work [smc] RIP: 0010:__list_del_entry_valid.cold+0x31/0x47 RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086 RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000 RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38 R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002 R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0 FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: rwsem_down_write_slowpath+0x17e/0x470 smc_link_down_work+0x3c/0x60 [smc] process_one_work+0x1ac/0x350 worker_thread+0x49/0x2f0 ? rescuer_thread+0x360/0x360 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: fix incorrect IFH SRC_PORT field in ocelot_ifh_set_basic() Packets injected by the CPU should have a SRC_PORT field equal to the CPU port module index in the Analyzer block (ocelot->num_phys_ports). The blamed commit copied the ocelot_ifh_set_basic() call incorrectly from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling with "x", it calls with BIT_ULL(x), but the field is not a port mask, but rather a single port index. [ side note: this is the technical debt of code duplication :( ] The error used to be silent and doesn't appear to have other user-visible manifestations, but with new changes in the packing library, it now fails loudly as follows: ------------[ cut here ]------------ Cannot store 0x40 inside bits 46-43 - will truncate sja1105 spi2.0: xmit timed out WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198 sja1105 spi2.0: timed out polling for tstamp CPU: 1 UID: 0 PID: 102 Comm: felix_xmit Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605 Call trace: __pack+0x90/0x198 (P) __pack+0x90/0x198 (L) packing+0x78/0x98 ocelot_ifh_set_basic+0x260/0x368 ocelot_port_inject_frame+0xa8/0x250 felix_port_deferred_xmit+0x14c/0x258 kthread_worker_fn+0x134/0x350 kthread+0x114/0x138 The code path pertains to the ocelot switchdev driver and to the felix secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q. The messenger (packing) is not really to blame, so fix the original commit instead. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netdevsim: prevent bad user input in nsim_dev_health_break_write() If either a zero count or a large one is provided, kernel can crash. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ionic: Fix netdev notifier unregister on failure If register_netdev() fails, then the driver leaks the netdev notifier. Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix memory leak on last export_udmabuf() error path In export_udmabuf(), if dma_buf_fd() fails because the FD table is full, a dma_buf owning the udmabuf has already been created; but the error handling in udmabuf_create() will tear down the udmabuf without doing anything about the containing dma_buf. This leaves a dma_buf in memory that contains a dangling pointer; though that doesn't seem to lead to anything bad except a memory leak. Fix it by moving the dma_buf_fd() call out of export_udmabuf() so that we can give it different error handling. Note that the shape of this code changed a lot in commit 5e72b2b41a21 ("udmabuf: convert udmabuf driver to use folios"); but the memory leak seems to have existed since the introduction of udmabuf. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereference drm_mode_duplicate() could return NULL due to lack of memory, which will then call NULL pointer dereference. Add a check to prevent it. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_direct_read_write() The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked and pages remain pinned if ceph_alloc_sparse_ext_map() fails. There is no need to delay the allocation of sparse_ext map until after the bvecs array is set up, so fix this by moving sparse_ext allocation a bit earlier. Also, make a similar adjustment in __ceph_sync_read() for consistency (a leak of the same kind in __ceph_sync_read() has been addressed differently). | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Avoid segmentation fault on module unload The segmentation fault happens because: During modprobe: 1. In igen6_probe(), igen6_pvt will be allocated with kzalloc() 2. In igen6_register_mci(), mci->pvt_info will point to &igen6_pvt->imc[mc] During rmmod: 1. In mci_release() in edac_mc.c, it will kfree(mci->pvt_info) 2. In igen6_remove(), it will kfree(igen6_pvt); Fix this issue by setting mci->pvt_info to NULL to avoid the double kfree. | 7.8 |
High |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix release of IRQ Kernel logs indicate an IRQ was double-freed. Pass correct device ID during IRQ release. [Dominique: remove confusing variable reset to 0] | 7.8 |
High |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Mark raw_tp arguments with PTR_MAYBE_NULL Arguments to a raw tracepoint are tagged as trusted, which carries the semantics that the pointer will be non-NULL. However, in certain cases, a raw tracepoint argument may end up being NULL. More context about this issue is available in [0]. Thus, there is a discrepancy between the reality, that raw_tp arguments can actually be NULL, and the verifier's knowledge, that they are never NULL, causing explicit NULL checks to be deleted, and accesses to such pointers potentially crashing the kernel. To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special case the dereference and pointer arithmetic to permit it, and allow passing them into helpers/kfuncs; these exceptions are made for raw_tp programs only. Ensure that we don't do this when ref_obj_id > 0, as in that case this is an acquired object and doesn't need such adjustment. The reason we do mask_raw_tp_trusted_reg logic is because other will recheck in places whether the register is a trusted_reg, and then consider our register as untrusted when detecting the presence of the PTR_MAYBE_NULL flag. To allow safe dereference, we enable PROBE_MEM marking when we see loads into trusted pointers with PTR_MAYBE_NULL. While trusted raw_tp arguments can also be passed into helpers or kfuncs where such broken assumption may cause issues, a future patch set will tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can already be passed into helpers and causes similar problems. Thus, they are left alone for now. It is possible that these checks also permit passing non-raw_tp args that are trusted PTR_TO_BTF_ID with null marking. In such a case, allowing dereference when pointer is NULL expands allowed behavior, so won't regress existing programs, and the case of passing these into helpers is the same as above and will be dealt with later. Also update the failure case in tp_btf_nullable selftest to capture the new behavior, as the verifier will no longer cause an error when directly dereference a raw tracepoint argument marked as __nullable. [0]: https://lore.kernel.org/bpf/[email protected] | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix looping of queued SG entries The dwc3_request->num_queued_sgs is decremented on completion. If a partially completed request is handled, then the dwc3_request->num_queued_sgs no longer reflects the total number of num_queued_sgs (it would be cleared). Correctly check the number of request SG entries remained to be prepare and queued. Failure to do this may cause null pointer dereference when accessing non-existent SG entry. | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the memory allocation issue in amdgpu_discovery_get_nps_info() Fix two issues with memory allocation in amdgpu_discovery_get_nps_info() for mem_ranges: - Add a check for allocation failure to avoid dereferencing a null pointer. - As suggested by Christophe, use kvcalloc() for memory allocation, which checks for multiplication overflow. Additionally, assign the output parameters nps_type and range_cnt after the kvcalloc() call to prevent modifying the output parameters in case of an error return. | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add NULL checks for all the kunit_kzalloc() in sound_kunit.c | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: fix recursive lock when verdict program return SK_PASS When the stream_verdict program returns SK_PASS, it places the received skb into its own receive queue, but a recursive lock eventually occurs, leading to an operating system deadlock. This issue has been present since v6.9. ''' sk_psock_strp_data_ready write_lock_bh(&sk->sk_callback_lock) strp_data_ready strp_read_sock read_sock -> tcp_read_sock strp_recv cb.rcv_msg -> sk_psock_strp_read # now stream_verdict return SK_PASS without peer sock assign __SK_PASS = sk_psock_map_verd(SK_PASS, NULL) sk_psock_verdict_apply sk_psock_skb_ingress_self sk_psock_skb_ingress_enqueue sk_psock_data_ready read_lock_bh(&sk->sk_callback_lock) <= dead lock ''' This topic has been discussed before, but it has not been fixed. Previous discussion: https://lore.kernel.org/all/[email protected] | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on node blkaddr in truncate_node() syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2534! RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534 Call Trace: truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909 f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288 f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856 evict+0x4e8/0x9b0 fs/inode.c:723 f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986 f2fs_create+0x357/0x530 fs/f2fs/namei.c:394 lookup_open fs/namei.c:3595 [inline] open_last_lookups fs/namei.c:3694 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3930 do_filp_open+0x235/0x490 fs/namei.c:3960 do_sys_openat2+0x13e/0x1d0 fs/open.c:1415 do_sys_open fs/open.c:1430 [inline] __do_sys_openat fs/open.c:1446 [inline] __se_sys_openat fs/open.c:1441 [inline] __x64_sys_openat+0x247/0x2a0 fs/open.c:1441 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534 The root cause is: on a fuzzed image, blkaddr in nat entry may be corrupted, then it will cause system panic when using it in f2fs_invalidate_blocks(), to avoid this, let's add sanity check on nat blkaddr in truncate_node(). | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio' If platform_get_resource_byname() fails and returns NULL because DT lacks an 'mmio' property for the MHI endpoint, dereferencing res->start will cause a NULL pointer access. Add a check to prevent it. [kwilczynski: error message update per the review feedback] [bhelgaas: commit log] | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport Since transport->sock has been set to NULL during reset transport, XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request() to dereference the transport->sock that has been set to NULL. | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: musb: Fix hardware lockup on first Rx endpoint request There is a possibility that a request's callback could be invoked from usb_ep_queue() (call trace below, supplemented with missing calls): req->complete from usb_gadget_giveback_request (drivers/usb/gadget/udc/core.c:999) usb_gadget_giveback_request from musb_g_giveback (drivers/usb/musb/musb_gadget.c:147) musb_g_giveback from rxstate (drivers/usb/musb/musb_gadget.c:784) rxstate from musb_ep_restart (drivers/usb/musb/musb_gadget.c:1169) musb_ep_restart from musb_ep_restart_resume_work (drivers/usb/musb/musb_gadget.c:1176) musb_ep_restart_resume_work from musb_queue_resume_work (drivers/usb/musb/musb_core.c:2279) musb_queue_resume_work from musb_gadget_queue (drivers/usb/musb/musb_gadget.c:1241) musb_gadget_queue from usb_ep_queue (drivers/usb/gadget/udc/core.c:300) According to the docstring of usb_ep_queue(), this should not happen: "Note that @req's ->complete() callback must never be called from within usb_ep_queue() as that can create deadlock situations." In fact, a hardware lockup might occur in the following sequence: 1. The gadget is initialized using musb_gadget_enable(). 2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an interrupt. 3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an empty queue (next_request() returns NULL). The interrupt flag has already been cleared by the glue layer handler, but the RXPKTRDY flag remains set. 4. The first request is enqueued using usb_ep_queue(), leading to the call of req->complete(), as shown in the call trace above. 5. If the callback enables IRQs and another packet is waiting, step (3) repeats. The request queue is empty because usb_g_giveback() removes the request before invoking the callback. 6. The endpoint remains locked up, as the interrupt triggered by hardware setting the RXPKTRDY flag has been handled, but the flag itself remains set. For this scenario to occur, it is only necessary for IRQs to be enabled at some point during the complete callback. This happens with the USB Ethernet gadget, whose rx_complete() callback calls netif_rx(). If called in the task context, netif_rx() disables the bottom halves (BHs). When the BHs are re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The gadget itself is initialized at module load (or at boot if built-in), but the first request is enqueued when the network interface is brought up, triggering rx_complete() in the task context via ioctl(). If a packet arrives while the interface is down, it can prevent the interface from receiving any further packets from the USB host. The situation is quite complicated with many parties involved. This particular issue can be resolved in several possible ways: 1. Ensure that callbacks never enable IRQs. This would be difficult to enforce, as discovering how netif_rx() interacts with interrupts was already quite challenging and u_ether is not the only function driver. Similar "bugs" could be hidden in other drivers as well. 2. Disable MUSB interrupts in musb_g_giveback() before calling the callback and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(), for example). This would ensure that MUSB interrupts are not handled during the callback, even if IRQs are enabled. In fact, it would allow IRQs to be enabled when releasing the lock. However, this feels like an inelegant hack. 3. Modify the interrupt handler to clear the RXPKTRDY flag if the request queue is empty. While this approach also feels like a hack, it wastes CPU time by attempting to handle incoming packets when the software is not ready to process them. 4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart(). This ensures that the hardware can receive packets when there is at least one request in the queue. Once I ---truncated--- | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: irqchip/riscv-aplic: Prevent crash when MSI domain is missing If the APLIC driver is probed before the IMSIC driver, the parent MSI domain will be missing, which causes a NULL pointer dereference in msi_create_device_irq_domain(). Avoid this by deferring probe until the parent MSI domain is available. Use dev_err_probe() to avoid printing an error message when returning -EPROBE_DEFER. | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU protection. But it is possible to attach a non-sleepable BPF program to a uprobe, and non-sleepable BPF programs are freed via normal RCU (see __bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal RCU grace period does not imply a tasks-trace-RCU grace period. Fix it by explicitly waiting for a tasks-trace-RCU grace period after removing the attachment of a bpf_prog to a perf_event. | 7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
virtio_net: correct netdev_tx_reset_queue() invocation point
When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
cases for virtio-net.
This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.
netdev_tx_reset_queue() can actually be dropped from virtnet_open path;
the device is not stopped in any case. For BQL core part, it's just like
traffic nearly ceases to exist for some period. For stall detector added
to BQL, even if virtnet_close could somehow lead to some TX completions
delayed for long, followed by virtnet_open, we can just take it as stall
as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector
based on BQL"). Note also that users can still reset stall_max via sysfs.
So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This
eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now
explicitly required in freeze/restore path. This patch adds it to
immediately after free_unused_bufs(), following the rule of thumb:
netdev_tx_reset_queue() should follow any SKB freeing not followed by
netdev_tx_completed_queue(). This seems the most consistent and
streamlined approach, and now netdev_tx_reset_queue() runs whenever
free_unused_bufs() is done.
[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Do not call pmd dtor on vmemmap page table teardown
The vmemmap's, which is used for RV64 with SPARSEMEM_VMEMMAP, page
tables are populated using pmd (page middle directory) hugetables.
However, the pmd allocation is not using the generic mechanism used by
the VMA code (e.g. pmd_alloc()), or the RISC-V specific
create_pgd_mapping()/alloc_pmd_late(). Instead, the vmemmap page table
code allocates a page, and calls vmemmap_set_pmd(). This results in
that the pmd ctor is *not* called, nor would it make sense to do so.
Now, when tearing down a vmemmap page table pmd, the cleanup code
would unconditionally, and incorrectly call the pmd dtor, which
results in a crash (best case).
This issue was found when running the HMM selftests:
| tools/testing/selftests/mm# ./test_hmm.sh smoke
| ... # when unloading the test_hmm.ko module
| page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10915b
| flags: 0x1000000000000000(node=0|zone=1)
| raw: 1000000000000000 0000000000000000 dead000000000122 0000000000000000
| raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
| page dumped because: VM_BUG_ON_PAGE(ptdesc->pmd_huge_pte)
| ------------[ cut here ]------------
| kernel BUG at include/linux/mm.h:3080!
| Kernel BUG [#1]
| Modules linked in: test_hmm(-) sch_fq_codel fuse drm drm_panel_orientation_quirks backlight dm_mod
| CPU: 1 UID: 0 PID: 514 Comm: modprobe Tainted: G W 6.12.0-00982-gf2a4f1682d07 #2
| Tainted: [W]=WARN
| Hardware name: riscv-virtio qemu/qemu, BIOS 2024.10 10/01/2024
| epc : remove_pgd_mapping+0xbec/0x1070
| ra : remove_pgd_mapping+0xbec/0x1070
| epc : ffffffff80010a68 ra : ffffffff80010a68 sp : ff20000000a73940
| gp : ffffffff827b2d88 tp : ff6000008785da40 t0 : ffffffff80fbce04
| t1 : 0720072007200720 t2 : 706d756420656761 s0 : ff20000000a73a50
| s1 : ff6000008915cff8 a0 : 0000000000000039 a1 : 0000000000000008
| a2 : ff600003fff0de20 a3 : 0000000000000000 a4 : 0000000000000000
| a5 : 0000000000000000 a6 : c0000000ffffefff a7 : ffffffff824469b8
| s2 : ff1c0000022456c0 s3 : ff1ffffffdbfffff s4 : ff6000008915c000
| s5 : ff6000008915c000 s6 : ff6000008915c000 s7 : ff1ffffffdc00000
| s8 : 0000000000000001 s9 : ff1ffffffdc00000 s10: ffffffff819a31f0
| s11: ffffffffffffffff t3 : ffffffff8000c950 t4 : ff60000080244f00
| t5 : ff60000080244000 t6 : ff20000000a73708
| status: 0000000200000120 badaddr: ffffffff80010a68 cause: 0000000000000003
| [ |
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Fix UAF in blkcg_unpin_online()
blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To
walk up, it uses blkcg_parent(blkcg) but it was calling that after
blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the
following UAF:
==================================================================
BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270
Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117
CPU: 9 UID: 0 PID: 117 Comm: kworker/9:1 Not tainted 6.13.0-rc1-work-00182-gb8f52214c61a-dirty #48
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
|
7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gpio: graniterapids: Fix vGPIO driver crash Move setting irq_chip.name from probe() function to the initialization of "irq_chip" struct in order to fix vGPIO driver crash during bootup. Crash was caused by unauthorized modification of irq_chip.name field where irq_chip struct was initialized as const. This behavior is a consequence of suboptimal implementation of gpio_irq_chip_set_chip(), which should be changed to avoid casting away const qualifier. Crash log: BUG: unable to handle page fault for address: ffffffffc0ba81c0 /#PF: supervisor write access in kernel mode /#PF: error_code(0x0003) - permissions violation CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1 Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024 RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids] | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68 | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Remove cache tags before disabling ATS
The current implementation removes cache tags after disabling ATS,
leading to potential memory leaks and kernel crashes. Specifically,
CACHE_TAG_DEVTLB type cache tags may still remain in the list even
after the domain is freed, causing a use-after-free condition.
This issue really shows up when multiple VFs from different PFs
passed through to a single user-space process via vfio-pci. In such
cases, the kernel may crash with kernel messages like:
BUG: kernel NULL pointer dereference, address: 0000000000000014
PGD 19036a067 P4D 1940a3067 PUD 136c9b067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 74 UID: 0 PID: 3183 Comm: testCli Not tainted 6.11.9 #2
RIP: 0010:cache_tag_flush_range+0x9b/0x250
Call Trace:
|
7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain The qi_batch is allocated when assigning cache tag for a domain. While for nested parent domain, it is missed. Hence, when trying to map pages to the nested parent, NULL dereference occurred. Also, there is potential memleak since there is no lock around domain->qi_batch allocation. To solve it, add a helper for qi_batch allocation, and call it in both the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain(). BUG: kernel NULL pointer dereference, address: 0000000000000200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8104795067 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632 Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x80/0x150 ? do_user_addr_fault+0x63/0x7b0 ? exc_page_fault+0x7c/0x220 ? asm_exc_page_fault+0x26/0x30 ? cache_tag_flush_range_np+0x13c/0x260 intel_iommu_iotlb_sync_map+0x1a/0x30 iommu_map+0x61/0xf0 batch_to_domain+0x188/0x250 iopt_area_fill_domains+0x125/0x320 ? rcu_is_watching+0x11/0x50 iopt_map_pages+0x63/0x100 iopt_map_common.isra.0+0xa7/0x190 iopt_map_user_pages+0x6a/0x80 iommufd_ioas_map+0xcd/0x1d0 iommufd_fops_ioctl+0x118/0x1c0 __x64_sys_ioctl+0x93/0xc0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix NULL pointer dereference in capture_engine When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d) | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Dereference null return value In the function pqm_uninit there is a call-assignment of "pdd = kfd_get_process_device_data" which could be null, and this value was later dereferenced without checking. | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog Syzbot reported [1] crash that happens for following tracing scenario: - create tracepoint perf event with attr.inherit=1, attach it to the process and set bpf program to it - attached process forks -> chid creates inherited event the new child event shares the parent's bpf program and tp_event (hence prog_array) which is global for tracepoint - exit both process and its child -> release both events - first perf_event_detach_bpf_prog call will release tp_event->prog_array and second perf_event_detach_bpf_prog will crash, because tp_event->prog_array is NULL The fix makes sure the perf_event_detach_bpf_prog checks prog_array is valid before it tries to remove the bpf program from it. [1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix race between element replace and close()
Element replace (with a socket different from the one stored) may race
with socket's close() link popping & unlinking. __sock_map_delete()
unconditionally unrefs the (wrong) element:
// set map[0] = s0
map_update_elem(map, 0, s0)
// drop fd of s0
close(s0)
sock_map_close()
lock_sock(sk) (s0!)
sock_map_remove_links(sk)
link = sk_psock_link_pop()
sock_map_unlink(sk, link)
sock_map_delete_from_link
// replace map[0] with s1
map_update_elem(map, 0, s1)
sock_map_update_elem
(s1!) lock_sock(sk)
sock_map_update_common
psock = sk_psock(sk)
spin_lock(&stab->lock)
osk = stab->sks[idx]
sock_map_add_link(..., &stab->sks[idx])
sock_map_unref(osk, &stab->sks[idx])
psock = sk_psock(osk)
sk_psock_put(sk, psock)
if (refcount_dec_and_test(&psock))
sk_psock_drop(sk, psock)
spin_unlock(&stab->lock)
unlock_sock(sk)
__sock_map_delete
spin_lock(&stab->lock)
sk = *psk // s1 replaced s0; sk == s1
if (!sk_test || sk_test == sk) // sk_test (s0) != sk (s1); no branch
sk = xchg(psk, NULL)
if (sk)
sock_map_unref(sk, psk) // unref s1; sks[idx] will dangle
psock = sk_psock(sk)
sk_psock_put(sk, psock)
if (refcount_dec_and_test())
sk_psock_drop(sk, psock)
spin_unlock(&stab->lock)
release_sock(sk)
Then close(map) enqueues bpf_map_free_deferred, which finally calls
sock_map_free(). This results in some refcount_t warnings along with
a KASAN splat [1].
Fix __sock_map_delete(), do not allow sock_map_unref() on elements that
may have been replaced.
[1]:
BUG: KASAN: slab-use-after-free in sock_map_free+0x10e/0x330
Write of size 4 at addr ffff88811f5b9100 by task kworker/u64:12/1063
CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Not tainted 6.12.0+ #125
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
Workqueue: events_unbound bpf_map_free_deferred
Call Trace:
|
7 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
Since the netlink attribute range validation provides inclusive
checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be
IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one.
One crash stack for demonstration:
==================================================================
BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939
Read of size 6 at addr 001102080000000c by task fuzzer.386/9508
CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2
Call Trace:
|
7.1 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl Fix an issue detected by syzbot with KASAN: BUG: KASAN: vmalloc-out-of-bounds in cmd_to_func drivers/acpi/nfit/ core.c:416 [inline] BUG: KASAN: vmalloc-out-of-bounds in acpi_nfit_ctl+0x20e8/0x24a0 drivers/acpi/nfit/core.c:459 The issue occurs in cmd_to_func when the call_pkg->nd_reserved2 array is accessed without verifying that call_pkg points to a buffer that is appropriately sized as a struct nd_cmd_pkg. This can lead to out-of-bounds access and undefined behavior if the buffer does not have sufficient space. To address this, a check was added in acpi_nfit_ctl() to ensure that buf is not NULL and that buf_len is less than sizeof(*call_pkg) before accessing it. This ensures safe access to the members of call_pkg, including the nd_reserved2 array. | 7.1 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, prevent potential error pointer dereference The dr_domain_add_vport_cap() function generally returns NULL on error but sometimes we want it to return ERR_PTR(-EBUSY) so the caller can retry. The problem here is that "ret" can be either -EBUSY or -ENOMEM and if it's and -ENOMEM then the error pointer is propogated back and eventually dereferenced in dr_ste_v0_build_src_gvmi_qpn_tag(). | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: lapb: increase LAPB_HEADER_LEN
It is unclear if net/lapb code is supposed to be ready for 8021q.
We can at least avoid crashes like the following :
skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282
RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600
RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000
RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60
R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140
R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016
FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: defer final 'struct net' free in netns dismantle
Ilya reported a slab-use-after-free in dst_destroy [1]
Issue is in xfrm6_net_init() and xfrm4_net_init() :
They copy xfrm[46]_dst_ops_template into net->xfrm.xfrm[46]_dst_ops.
But net structure might be freed before all the dst callbacks are
called. So when dst_destroy() calls later :
if (dst->ops->destroy)
dst->ops->destroy(dst);
dst->ops points to the old net->xfrm.xfrm[46]_dst_ops, which has been freed.
See a relevant issue fixed in :
ac888d58869b ("net: do not delay dst_entries_add() in dst_release()")
A fix is to queue the 'struct net' to be freed after one
another cleanup_net() round (and existing rcu_barrier())
[1]
BUG: KASAN: slab-use-after-free in dst_destroy (net/core/dst.c:112)
Read of size 8 at addr ffff8882137ccab0 by task swapper/37/0
Dec 03 05:46:18 kernel:
CPU: 37 UID: 0 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 6.12.0 #67
Hardware name: Red Hat KVM/RHEL, BIOS 1.16.1-1.el9 04/01/2014
Call Trace:
|
7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Avoid WARN() for symlink errors Using WARN() for showing the error of symlink creations don't give more information than telling that something goes wrong, since the usual code path is a lregister callback from each control element creation. More badly, the use of WARN() rather confuses fuzzer as if it were serious issues. This patch downgrades the warning messages to use the normal dev_err() instead of WARN(). For making it clearer, add the function name to the prefix, too. | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix aggregation ID mask to prevent oops on 5760X chips
The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of
the previous generation (5750X or P5). However, the aggregation ID
fields in the completion structures on P7 have been redefined from
16 bits to 12 bits. The freed up 4 bits are redefined for part of the
metadata such as the VLAN ID. The aggregation ID mask was not modified
when adding support for P7 chips. Including the extra 4 bits for the
aggregation ID can potentially cause the driver to store or fetch the
packet header of GRO/LRO packets in the wrong TPA buffer. It may hit
the BUG() condition in __skb_pull() because the SKB contains no valid
packet header:
kernel BUG at include/linux/skbuff.h:2766!
Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022
RIP: 0010:eth_type_trans+0xda/0x140
Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48
RSP: 0018:ff615003803fcc28 EFLAGS: 00010283
RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040
RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000
RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001
R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0
R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000
FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not defer rule destruction via call_rcu
nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:
WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work
RIP: 0010:nft_set_destroy+0x3fe/0x5c0
Call Trace:
|
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is not safe since for the most part entries fetched this way shall be treated as rcu_dereference: Note that the value returned by rcu_dereference() is valid only within the enclosing RCU read-side critical section [1]_. For example, the following is **not** legal:: rcu_read_lock(); p = rcu_dereference(head.next); rcu_read_unlock(); x = p->address; /* BUG!!! */ rcu_read_lock(); y = p->data; /* BUG!!! */ rcu_read_unlock(); | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
|
7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/reg_sr: Remove register pool That pool implementation doesn't really work: if the krealloc happens to move the memory and return another address, the entries in the xarray become invalid, leading to use-after-free later: BUG: KASAN: slab-use-after-free in xe_reg_sr_apply_mmio+0x570/0x760 [xe] Read of size 4 at addr ffff8881244b2590 by task modprobe/2753 Allocated by task 2753: kasan_save_stack+0x39/0x70 kasan_save_track+0x14/0x40 kasan_save_alloc_info+0x37/0x60 __kasan_kmalloc+0xc3/0xd0 __kmalloc_node_track_caller_noprof+0x200/0x6d0 krealloc_noprof+0x229/0x380 Simplify the code to fix the bug. A better pooling strategy may be added back later if needed. (cherry picked from commit e5283bd4dfecbd3335f43b62a68e24dae23f59e4) | 7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: can: hi311x: hi3110_can_ist(): fix potential use-after-free The commit a22bd630cfff ("can: hi311x: do not report txerr and rxerr during bus-off") removed the reporting of rxerr and txerr even in case of correct operation (i. e. not bus-off). The error count information added to the CAN frame after netif_rx() is a potential use after free, since there is no guarantee that the skb is in the same state. It might be freed or reused. Fix the issue by postponing the netif_rx() call in case of txerr and rxerr reporting. | 7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: fix LED ID check in led_tg_check()
Syzbot has reported the following BUG detected by KASAN:
BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70
Read of size 1 at addr ffff8881022da0c8 by task repro/5879
...
Call Trace:
|
7.1 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: enetc: Do not configure preemptible TCs if SIs do not support Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs() to configure preemptible TCs. However, only PF is able to configure preemptible TCs. Because only PF has related registers, while VF does not have these registers. So for VF, its hw->port pointer is NULL. Therefore, VF will access an invalid pointer when accessing a non-existent register, which will cause a crash issue. The simplified log is as follows. root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \ mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1 [ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00 [ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400 [ 187.511140] Call trace: [ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.518918] enetc_setup_tc_mqprio+0x180/0x214 [ 187.523374] enetc_vf_setup_tc+0x1c/0x30 [ 187.527306] mqprio_enable_offload+0x144/0x178 [ 187.531766] mqprio_init+0x3ec/0x668 [ 187.535351] qdisc_create+0x15c/0x488 [ 187.539023] tc_modify_qdisc+0x398/0x73c [ 187.542958] rtnetlink_rcv_msg+0x128/0x378 [ 187.547064] netlink_rcv_skb+0x60/0x130 [ 187.550910] rtnetlink_rcv+0x18/0x24 [ 187.554492] netlink_unicast+0x300/0x36c [ 187.558425] netlink_sendmsg+0x1a8/0x420 [ 187.606759] ---[ end trace 0000000000000000 ]--- In addition, some PFs also do not support configuring preemptible TCs, such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs, but we should prevent these PFs from accessing these unimplemented registers. | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: hsr: avoid potential out-of-bound access in fill_frame_info() syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one. Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case. BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606 __dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: Fix icmp host relookup triggering ip_rt_bug
arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is:
WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
|
5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid possible NULL deref in modify_prefix_route()
syzbot found a NULL deref [1] in modify_prefix_route(), caused by one
fib6_info without a fib6_table pointer set.
This can happen for net->ipv6.fib6_null_entry
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 UID: 0 PID: 5837 Comm: syz-executor888 Not tainted 6.12.0-syzkaller-09567-g7eef7e306d3c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__lock_acquire+0xe4/0x3c40 kernel/locking/lockdep.c:5089
Code: 08 84 d2 0f 85 15 14 00 00 44 8b 0d ca 98 f5 0e 45 85 c9 0f 84 b4 0e 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 96 2c 00 00 49 8b 04 24 48 3d a0 07 7f 93 0f 84
RSP: 0018:ffffc900035d7268 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000006 RSI: 1ffff920006bae5f RDI: 0000000000000030
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
R10: ffffffff90608e17 R11: 0000000000000001 R12: 0000000000000030
R13: ffff888036334880 R14: 0000000000000000 R15: 0000000000000000
FS: 0000555579e90380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc59cc4278 CR3: 0000000072b54000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dccp: Fix memory leak in dccp_feat_change_recv If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free of kernel socket in cleanup_bearer(). syzkaller reported a use-after-free of UDP kernel socket in cleanup_bearer() without repro. [0][1] When bearer_disable() calls tipc_udp_disable(), cleanup of the UDP kernel socket is deferred by work calling cleanup_bearer(). tipc_exit_net() waits for such works to finish by checking tipc_net(net)->wq_count. However, the work decrements the count too early before releasing the kernel socket, unblocking cleanup_net() and resulting in use-after-free. Let's move the decrement after releasing the socket in cleanup_bearer(). [0]: ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at sk_alloc+0x438/0x608 inet_create+0x4c8/0xcb0 __sock_create+0x350/0x6b8 sock_create_kern+0x58/0x78 udp_sock_create4+0x68/0x398 udp_sock_create+0x88/0xc8 tipc_udp_enable+0x5e8/0x848 __tipc_nl_bearer_enable+0x84c/0xed8 tipc_nl_bearer_enable+0x38/0x60 genl_family_rcv_msg_doit+0x170/0x248 genl_rcv_msg+0x400/0x5b0 netlink_rcv_skb+0x1dc/0x398 genl_rcv+0x44/0x68 netlink_unicast+0x678/0x8b0 netlink_sendmsg+0x5e4/0x898 ____sys_sendmsg+0x500/0x830 [1]: BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline] BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 udp_hashslot include/net/udp.h:85 [inline] udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489 __sock_release net/socket.c:658 [inline] sock_release+0xa0/0x210 net/socket.c:686 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_free_hook mm/slub.c:2269 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x207/0xc40 mm/slub.c:4682 net_free net/core/net_namespace.c:454 [inline] cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: events cleanup_bearer | 7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/smc: fix LGR and link use-after-free issue We encountered a LGR/link use-after-free issue, which manifested as the LGR/link refcnt reaching 0 early and entering the clear process, making resource access unsafe. refcount_t: addition on 0; use-after-free. WARNING: CPU: 14 PID: 107447 at lib/refcount.c:25 refcount_warn_saturate+0x9c/0x140 Workqueue: events smc_lgr_terminate_work [smc] Call trace: refcount_warn_saturate+0x9c/0x140 __smc_lgr_terminate.part.45+0x2a8/0x370 [smc] smc_lgr_terminate_work+0x28/0x30 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 or refcount_t: underflow; use-after-free. WARNING: CPU: 6 PID: 93140 at lib/refcount.c:28 refcount_warn_saturate+0xf0/0x140 Workqueue: smc_hs_wq smc_listen_work [smc] Call trace: refcount_warn_saturate+0xf0/0x140 smcr_link_put+0x1cc/0x1d8 [smc] smc_conn_free+0x110/0x1b0 [smc] smc_conn_abort+0x50/0x60 [smc] smc_listen_find_device+0x75c/0x790 [smc] smc_listen_work+0x368/0x8a0 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 It is caused by repeated release of LGR/link refcnt. One suspect is that smc_conn_free() is called repeatedly because some smc_conn_free() from server listening path are not protected by sock lock. e.g. Calls under socklock | smc_listen_work ------------------------------------------------------- lock_sock(sk) | smc_conn_abort smc_conn_free | \- smc_conn_free \- smcr_link_put | \- smcr_link_put (duplicated) release_sock(sk) So here add sock lock protection in smc_listen_work() path, making it exclusive with other connection operations. | 7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: avoid potential UAF in default_operstate()
syzbot reported an UAF in default_operstate() [1]
Issue is a race between device and netns dismantles.
After calling __rtnl_unlock() from netdev_run_todo(),
we can not assume the netns of each device is still alive.
Make sure the device is not in NETREG_UNREGISTERED state,
and add an ASSERT_RTNL() before the call to
__dev_get_by_index().
We might move this ASSERT_RTNL() in __dev_get_by_index()
in the future.
[1]
BUG: KASAN: slab-use-after-free in __dev_get_by_index+0x5d/0x110 net/core/dev.c:852
Read of size 8 at addr ffff888043eba1b0 by task syz.0.0/5339
CPU: 0 UID: 0 PID: 5339 Comm: syz.0.0 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
|
7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gpio: grgpio: Add NULL check in grgpio_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in grgpio_probe is not checked. Add NULL check in grgpio_probe, to handle kernel NULL pointer dereference error. | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix the memleak while create new ctrl failed Now while we create new ctrl failed, we have not free the tagset occupied by admin_q, here try to fix it. | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release(). | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix when get product name maybe null pointer Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 ---truncated--- | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read An offset from client could be a negative value, It could lead to an out-of-bounds read from the stream_buf. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf. | 7.1 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Write in ksmbd_vfs_stream_write An offset from client could be a negative value, It could allows to write data outside the bounds of the allocated buffer. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx] | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: sysfs: Prevent div by zero Prevent a division by 0 when monitoring is not enabled. | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Cancel RTC work during ufshcd_remove() Currently, RTC work is only cancelled during __ufshcd_wl_suspend(). When ufshcd is removed in ufshcd_remove(), RTC work is not cancelled. Due to this, any further trigger of the RTC work after ufshcd_remove() would result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 00000000000002a4 Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c pm_runtime_get_if_active+0x24/0xb4 ufshcd_rtc_work+0x124/0x19c process_scheduled_works+0x18c/0x2d8 worker_thread+0x144/0x280 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Since RTC work accesses the ufshcd internal structures, it should be cancelled when ufshcd is removed. So do that in ufshcd_remove(), as per the order in ufshcd_init(). | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: qcom: Only free platform MSIs when ESI is enabled Otherwise, it will result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 platform_device_msi_free_irqs_all+0x14/0x20 ufs_qcom_remove+0x34/0x48 [ufs_qcom] platform_remove+0x28/0x44 device_remove+0x4c/0x80 device_release_driver_internal+0xd8/0x178 driver_detach+0x50/0x9c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 ufs_qcom_pltform_exit+0x18/0xb94 [ufs_qcom] __arm64_sys_delete_module+0x180/0x260 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xdc el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194 | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: gpcv2: Adjust delay after power up handshake The udelay(5) is not enough, sometimes below kernel panic still be triggered: [ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt [ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1 [ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT) [ 4.012985] Call trace: [...] [ 4.013029] arm64_serror_panic+0x64/0x70 [ 4.013034] do_serror+0x3c/0x70 [ 4.013039] el1h_64_error_handler+0x30/0x54 [ 4.013046] el1h_64_error+0x64/0x68 [ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48 [ 4.013059] __genpd_runtime_resume+0x30/0x80 [ 4.013066] genpd_runtime_resume+0x114/0x29c [ 4.013073] __rpm_callback+0x48/0x1e0 [ 4.013079] rpm_callback+0x68/0x80 [ 4.013084] rpm_resume+0x3bc/0x6a0 [ 4.013089] __pm_runtime_resume+0x50/0x9c [ 4.013095] pm_runtime_get_suppliers+0x60/0x8c [ 4.013101] __driver_probe_device+0x4c/0x14c [ 4.013108] driver_probe_device+0x3c/0x120 [ 4.013114] __driver_attach+0xc4/0x200 [ 4.013119] bus_for_each_dev+0x7c/0xe0 [ 4.013125] driver_attach+0x24/0x30 [ 4.013130] bus_add_driver+0x110/0x240 [ 4.013135] driver_register+0x68/0x124 [ 4.013142] __platform_driver_register+0x24/0x30 [ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma] [ 4.013163] do_one_initcall+0x60/0x1e0 [ 4.013168] do_init_module+0x5c/0x21c [ 4.013175] load_module+0x1a98/0x205c [ 4.013181] init_module_from_file+0x88/0xd4 [ 4.013187] __arm64_sys_finit_module+0x258/0x350 [ 4.013194] invoke_syscall.constprop.0+0x50/0xe0 [ 4.013202] do_el0_svc+0xa8/0xe0 [ 4.013208] el0_svc+0x3c/0x140 [ 4.013215] el0t_64_sync_handler+0x120/0x12c [ 4.013222] el0t_64_sync+0x190/0x194 [ 4.013228] SMP: stopping secondary CPUs The correct way is to wait handshake, but it needs BUS clock of BLK-CTL be enabled, which is in separate driver. So delay is the only option here. The udelay(10) is a data got by experiment. | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU Commit 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU") adds functionality that architectures can use to optionally allocate and build cacheinfo early during boot. Commit 6539cffa9495 ("cacheinfo: Add arch specific early level initializer") lets secondary CPUs correct (and reallocate memory) cacheinfo data if needed. If the early build functionality is not used and cacheinfo does not need correction, memory for cacheinfo is never allocated. x86 does not use the early build functionality. Consequently, during the cacheinfo CPU hotplug callback, last_level_cache_is_valid() attempts to dereference a NULL pointer: BUG: kernel NULL pointer dereference, address: 0000000000000100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not present page PGD 0 P4D 0 Oops: 0000 [#1] PREEPMT SMP NOPTI CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1 RIP: 0010: last_level_cache_is_valid+0x95/0xe0a Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback if not done earlier. Moreover, before determining the validity of the last-level cache info, ensure that it has been allocated. Simply checking for non-zero cache_leaves() is not sufficient, as some architectures (e.g., Intel processors) have non-zero cache_leaves() before allocation. Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size(). This function iterates over all online CPUs. However, a CPU may have come online recently, but its cacheinfo may not have been allocated yet. While here, remove an unnecessary indentation in allocate_cache_info(). [ bp: Massage. ] | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bpf: fix OOB devmap writes when deleting elements
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[ 160.731662] #PF: supervisor read access in kernel mode
[ 160.736876] #PF: error_code(0x0000) - not-present page
[ 160.742095] PGD 0 P4D 0
[ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 160.767642] Workqueue: events_unbound bpf_map_free_deferred
[ 160.773308] RIP: 0010:dev_map_free+0x77/0x170
[ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.874092] PKRU: 55555554
[ 160.876847] Call Trace:
[ 160.879338] |
7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
xsk: fix OOB map writes when deleting elements
Jordy says:
"
In the xsk_map_delete_elem function an unsigned integer
(map->max_entries) is compared with a user-controlled signed integer
(k). Due to implicit type conversion, a large unsigned value for
map->max_entries can bypass the intended bounds check:
if (k >= map->max_entries)
return -EINVAL;
This allows k to hold a negative value (between -2147483648 and -2),
which is then used as an array index in m->xsk_map[k], which results
in an out-of-bounds access.
spin_lock_bh(&m->lock);
map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry
old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write
if (old_xs)
xsk_map_sock_delete(old_xs, map_entry);
spin_unlock_bh(&m->lock);
The xchg operation can then be used to cause an out-of-bounds write.
Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead
to further memory corruption.
"
It indeed results in following splat:
[76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108
[76612.904330] #PF: supervisor write access in kernel mode
[76612.909639] #PF: error_code(0x0002) - not-present page
[76612.914855] PGD 0 P4D 0
[76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP
[76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470
[76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60
[76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31
[76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246
[76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000
[76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000
[76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007
[76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8
[76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0
[76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000
[76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0
[76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[76613.041086] PKRU: 55555554
[76613.043842] Call Trace:
[76613.046331] |
7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sched/numa: fix memory leak due to the overwritten vma->numab_state
[Problem Description]
When running the hackbench program of LTP, the following memory leak is
reported by kmemleak.
# /opt/ltp/testcases/bin/hackbench 20 thread 1000
Running with 20*40 (== 800) tasks.
# dmesg | grep kmemleak
...
kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888cd8ca2c40 (size 64):
comm "hackbench", pid 17142, jiffies 4299780315
hex dump (first 32 bytes):
ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc bff18fd4):
[ |
5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mm/gup: handle NULL pages in unpin_user_pages()
The recent addition of "pofs" (pages or folios) handling to gup has a
flaw: it assumes that unpin_user_pages() handles NULL pages in the pages**
array. That's not the case, as I discovered when I ran on a new
configuration on my test machine.
Fix this by skipping NULL pages in unpin_user_pages(), just like
unpin_folios() already does.
Details: when booting on x86 with "numa=fake=2 movablecore=4G" on Linux
6.12, and running this:
tools/testing/selftests/mm/gup_longterm
...I get the following crash:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:sanity_check_pinned_pages+0x3a/0x2d0
...
Call Trace:
|
5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM
We currently assume that there is at least one VMA in a MM, which isn't
true.
So we might end up having find_vma() return NULL, to then de-reference
NULL. So properly handle find_vma() returning NULL.
This fixes the report:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline]
RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194
Code: ...
RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000
RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044
RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1
R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003
R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8
FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create'
An issue was identified in the dcn21_link_encoder_create function where
an out-of-bounds access could occur when the hpd_source index was used
to reference the link_enc_hpd_regs array. This array has a fixed size
and the index was not being checked against the array's bounds before
accessing it.
This fix adds a conditional check to ensure that the hpd_source index is
within the valid range of the link_enc_hpd_regs array. If the index is
out of bounds, the function now returns NULL to prevent undefined
behavior.
References:
[ 65.920507] ------------[ cut here ]------------
[ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29
[ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]'
[ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13
[ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020
[ 65.920527] Call Trace:
[ 65.920529] |
7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() bt_sock_alloc() allocates the sk object and attaches it to the provided sock object. On error l2cap_sock_alloc() frees the sk object, but the dangling pointer is still attached to the sock object, which may create use-after-free in other code. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc(). | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: af_can: do not leave a dangling sk pointer in can_create() On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: avoid NULL pointer error during sdio remove When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call trace: ath10k_sdio_remove ->ath10k_core_unregister …… ->ath10k_core_stop ->ath10k_hif_stop ->ath10k_sdio_irq_disable ->ath10k_hif_power_down ->del_timer_sync(&ar_sdio->sleep_timer) ->ath10k_core_destroy ->ath10k_mac_destroy ->ieee80211_free_hw ->wiphy_free …… ->wiphy_dev_release ->destroy_workqueue Need to call destroy_workqueue() before ath10k_core_destroy(), free the work queue buffer first and then free pointer of work queue by ath10k_core_destroy(). This order matches the error path order in ath10k_sdio_probe(). No work will be queued on sdio workqueue between it is destroyed and ath10k_core_destroy() is called. Based on the call_stack above, the reason is: Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and ath10k_sdio_irq_disable() will queue work on sdio workqueue. Sleep timer will be deleted before ath10k_core_destroy() in ath10k_hif_power_down(). ath10k_sdio_irq_disable() only be called in ath10k_hif_stop(). ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif bus, so ath10k_sdio_hif_tx_sg() won't be called anymore. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189 | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: array-index-out-of-bounds fix in dtReadFirst The value of stbl can be sometimes out of bounds due to a bad filesystem. Added a check with appopriate return of error code in that case. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree When the value of lp is 0 at the beginning of the for loop, it will become negative in the next assignment and we should bail out. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory. | 5.5 |
Medium |
|
14h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Create all dump files during debugfs initialization For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping. | 5.5 |
Medium |
|
14h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: leds: class: Protect brightness_show() with led_cdev->led_access mutex There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free in btrfs_encoded_read_endio()
Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
|
7.8 |
High |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: ref-verify: fix use-after-free after invalid ref action At btrfs_ref_tree_mod() after we successfully inserted the new ref entry (local variable 'ref') into the respective block entry's rbtree (local variable 'be'), if we find an unexpected action of BTRFS_DROP_DELAYED_REF, we error out and free the ref entry without removing it from the block entry's rbtree. Then in the error path of btrfs_ref_tree_mod() we call btrfs_free_ref_cache(), which iterates over all block entries and then calls free_block_entry() for each one, and there we will trigger a use-after-free when we are called against the block entry to which we added the freed ref entry to its rbtree, since the rbtree still points to the block entry, as we didn't remove it from the rbtree before freeing it in the error path at btrfs_ref_tree_mod(). Fix this by removing the new ref entry from the rbtree before freeing it. Syzbot report this with the following stack traces: BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4314 btrfs_insert_empty_item fs/btrfs/ctree.h:669 [inline] btrfs_insert_orphan_item+0x1f1/0x320 fs/btrfs/orphan.c:23 btrfs_orphan_add+0x6d/0x1a0 fs/btrfs/inode.c:3482 btrfs_unlink+0x267/0x350 fs/btrfs/inode.c:4293 vfs_unlink+0x365/0x650 fs/namei.c:4469 do_unlinkat+0x4ae/0x830 fs/namei.c:4533 __do_sys_unlinkat fs/namei.c:4576 [inline] __se_sys_unlinkat fs/namei.c:4569 [inline] __x64_sys_unlinkat+0xcc/0xf0 fs/namei.c:4569 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f BTRFS error (device loop0 state EA): Ref action 1, root 5, ref_root 5, parent 0, owner 260, offset 0, num_refs 1 __btrfs_mod_ref+0x76b/0xac0 fs/btrfs/extent-tree.c:2521 update_ref_for_cow+0x96a/0x11f0 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline] __btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137 __btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171 btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313 prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586 relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538 BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_i ---truncated--- | 7.8 |
High |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: fix error path on configuration of power domains
There is a chance to meet runtime issues during configuration of CAMSS
power domains, because on the error path dev_pm_domain_detach() is
unexpectedly called with NULL or error pointer.
One of the simplest ways to reproduce the problem is to probe CAMSS
driver before registration of CAMSS power domains, for instance if
a platform CAMCC driver is simply not built.
Warning backtrace example:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a2
|
5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: amphion: Set video drvdata before register video device The video drvdata should be set before the video device is registered, otherwise video_drvdata() may return NULL in the open() file ops, and led to oops. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Set video drvdata before register video device The video drvdata should be set before the video device is registered, otherwise video_drvdata() may return NULL in the open() file ops, and led to oops. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix null-ptr-deref during unload module The workqueue should be destroyed in mtk_jpeg_core.c since commit 09aea13ecf6f ("media: mtk-jpeg: refactor some variables"), otherwise the below calltrace can be easily triggered. [ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023 [ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] ... [ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17 ... [ 677.882838] pc : destroy_workqueue+0x3c/0x770 [ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.884314] sp : ffff80008ad974f0 [ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070 [ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690 [ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000 [ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0 [ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10 [ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d [ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90 [ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001 [ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000 [ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118 [ 677.893977] Call trace: [ 677.894297] destroy_workqueue+0x3c/0x770 [ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.895677] devm_action_release+0x50/0x90 [ 677.896211] release_nodes+0xe8/0x170 [ 677.896688] devres_release_all+0xf8/0x178 [ 677.897219] device_unbind_cleanup+0x24/0x170 [ 677.897785] device_release_driver_internal+0x35c/0x480 [ 677.898461] device_release_driver+0x20/0x38 ... [ 677.912665] ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Ensure power suppliers be suspended before detach them The power suppliers are always requested to suspend asynchronously, dev_pm_domain_detach() requires the caller to ensure proper synchronization of this function with power management callbacks. otherwise the detach may led to kernel panic, like below: [ 1457.107934] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040 [ 1457.116777] Mem abort info: [ 1457.119589] ESR = 0x0000000096000004 [ 1457.123358] EC = 0x25: DABT (current EL), IL = 32 bits [ 1457.128692] SET = 0, FnV = 0 [ 1457.131764] EA = 0, S1PTW = 0 [ 1457.134920] FSC = 0x04: level 0 translation fault [ 1457.139812] Data abort info: [ 1457.142707] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1457.148196] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1457.153256] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1457.158563] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001138b6000 [ 1457.165000] [0000000000000040] pgd=0000000000000000, p4d=0000000000000000 [ 1457.171792] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 1457.178045] Modules linked in: v4l2_jpeg wave6_vpu_ctrl(-) [last unloaded: mxc_jpeg_encdec] [ 1457.186383] CPU: 0 PID: 51938 Comm: kworker/0:3 Not tainted 6.6.36-gd23d64eea511 #66 [ 1457.194112] Hardware name: NXP i.MX95 19X19 board (DT) [ 1457.199236] Workqueue: pm pm_runtime_work [ 1457.203247] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1457.210188] pc : genpd_runtime_suspend+0x20/0x290 [ 1457.214886] lr : __rpm_callback+0x48/0x1d8 [ 1457.218968] sp : ffff80008250bc50 [ 1457.222270] x29: ffff80008250bc50 x28: 0000000000000000 x27: 0000000000000000 [ 1457.229394] x26: 0000000000000000 x25: 0000000000000008 x24: 00000000000f4240 [ 1457.236518] x23: 0000000000000000 x22: ffff00008590f0e4 x21: 0000000000000008 [ 1457.243642] x20: ffff80008099c434 x19: ffff00008590f000 x18: ffffffffffffffff [ 1457.250766] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 63343a6d726f6674 [ 1457.257890] x14: 0000000000000004 x13: 00000000000003a4 x12: 0000000000000002 [ 1457.265014] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff80008250bbb0 [ 1457.272138] x8 : ffff000092937200 x7 : ffff0003fdf6af80 x6 : 0000000000000000 [ 1457.279262] x5 : 00000000410fd050 x4 : 0000000000200000 x3 : 0000000000000000 [ 1457.286386] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008590f000 [ 1457.293510] Call trace: [ 1457.295946] genpd_runtime_suspend+0x20/0x290 [ 1457.300296] __rpm_callback+0x48/0x1d8 [ 1457.304038] rpm_callback+0x6c/0x78 [ 1457.307515] rpm_suspend+0x10c/0x570 [ 1457.311077] pm_runtime_work+0xc4/0xc8 [ 1457.314813] process_one_work+0x138/0x248 [ 1457.318816] worker_thread+0x320/0x438 [ 1457.322552] kthread+0x110/0x114 [ 1457.325767] ret_from_fork+0x10/0x20 | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
media: ts2020: fix null-ptr-deref in ts2020_probe()
KASAN reported a null-ptr-deref issue when executing the following
command:
# echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020]
RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809
RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010
RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6
R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790
R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001
FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: platform: allegro-dvt: Fix possible memory leak in allocate_buffers_internal() The buffer in the loop should be released under the exception path, otherwise there may be a memory leak here. To mitigate this, free the buffer when allegro_alloc_buffer fails. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix regression with module command in stack_trace_filter When executing the following command: # echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter The current mod command causes a null pointer dereference. While commit 0f17976568b3f ("ftrace: Fix regression with module command in stack_trace_filter") has addressed part of the issue, it left a corner case unhandled, which still results in a kernel crash. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Defer probe of clients after smmu device bound Null pointer dereference occurs due to a race between smmu driver probe and client driver probe, when of_dma_configure() for client is called after the iommu_device_register() for smmu driver probe has executed but before the driver_bound() for smmu driver has been called. Following is how the race occurs: T1:Smmu device probe T2: Client device probe really_probe() arm_smmu_device_probe() iommu_device_register() really_probe() platform_dma_configure() of_dma_configure() of_dma_configure_id() of_iommu_configure() iommu_probe_device() iommu_init_device() arm_smmu_probe_device() arm_smmu_get_by_fwnode() driver_find_device_by_fwnode() driver_find_device() next_device() klist_next() /* null ptr assigned to smmu */ /* null ptr dereference while smmu->streamid_mask */ driver_bound() klist_add_tail() When this null smmu pointer is dereferenced later in arm_smmu_probe_device, the device crashes. Fix this by deferring the probe of the client device until the smmu device has bound to the arm smmu driver. [will: Add comment] | 4.7 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ad7780: fix division by zero in ad7780_write_raw() In the ad7780_write_raw() , val2 can be zero, which might lead to a division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw() is based on iio_info's write_raw. While val is explicitly declared that can be zero (in read mode), val2 is not specified to be non-zero. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy() pci_epc_destroy() invokes pci_bus_release_domain_nr() to release the PCI domain ID, but there are two issues: - 'epc->dev' is passed to pci_bus_release_domain_nr() which was already freed by device_unregister(), leading to a use-after-free issue. - Domain ID corresponds to the EPC device parent, so passing 'epc->dev' is also wrong. Fix these issues by passing 'epc->dev.parent' to pci_bus_release_domain_nr() and also do it before device_unregister(). [mani: reworded subject and description] | 7.8 |
High |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: binder: fix node UAF in binder_add_freeze_work() In binder_add_freeze_work() we iterate over the proc->nodes with the proc->inner_lock held. However, this lock is temporarily dropped in order to acquire the node->lock first (lock nesting order). This can race with binder_node_release() and trigger a use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff53c04c29dd04 by task freeze/640 CPU: 5 UID: 0 PID: 640 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #17 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_add_freeze_work+0x148/0x478 binder_ioctl+0x1e70/0x25ac __arm64_sys_ioctl+0x124/0x190 Allocated by task 637: __kmalloc_cache_noprof+0x12c/0x27c binder_new_node+0x50/0x700 binder_transaction+0x35ac/0x6f74 binder_thread_write+0xfb8/0x42a0 binder_ioctl+0x18f0/0x25ac __arm64_sys_ioctl+0x124/0x190 Freed by task 637: kfree+0xf0/0x330 binder_thread_read+0x1e88/0x3a68 binder_ioctl+0x16d8/0x25ac __arm64_sys_ioctl+0x124/0x190 ================================================================== Fix the race by taking a temporary reference on the node before releasing the proc->inner lock. This ensures the node remains alive while in use. | 7.8 |
High |
|
14h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: binder: fix freeze UAF in binder_release_work() When a binder reference is cleaned up, any freeze work queued in the associated process should also be removed. Otherwise, the reference is freed while its ref->freeze.work is still queued in proc->work leading to a use-after-free issue as shown by the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_release_work+0x398/0x3d0 Read of size 8 at addr ffff31600ee91488 by task kworker/5:1/211 CPU: 5 UID: 0 PID: 211 Comm: kworker/5:1 Not tainted 6.11.0-rc7-00382-gfc6c92196396 #22 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: binder_release_work+0x398/0x3d0 binder_deferred_func+0xb60/0x109c process_one_work+0x51c/0xbd4 worker_thread+0x608/0xee8 Allocated by task 703: __kmalloc_cache_noprof+0x130/0x280 binder_thread_write+0xdb4/0x42a0 binder_ioctl+0x18f0/0x25ac __arm64_sys_ioctl+0x124/0x190 invoke_syscall+0x6c/0x254 Freed by task 211: kfree+0xc4/0x230 binder_deferred_func+0xae8/0x109c process_one_work+0x51c/0xbd4 worker_thread+0x608/0xee8 ================================================================== This commit fixes the issue by ensuring any queued freeze work is removed when cleaning up a binder reference. | 7.8 |
High |
|
14h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: binder: fix memleak of proc->delivered_freeze If a freeze notification is cleared with BC_CLEAR_FREEZE_NOTIFICATION before calling binder_freeze_notification_done(), then it is detached from its reference (e.g. ref->freeze) but the work remains queued in proc->delivered_freeze. This leads to a memory leak when the process exits as any pending entries in proc->delivered_freeze are not freed: unreferenced object 0xffff38e8cfa36180 (size 64): comm "binder-util", pid 655, jiffies 4294936641 hex dump (first 32 bytes): b8 e9 9e c8 e8 38 ff ff b8 e9 9e c8 e8 38 ff ff .....8.......8.. 0b 00 00 00 00 00 00 00 3c 1f 4b 00 00 00 00 00 ........<.K..... backtrace (crc 95983b32): [<000000000d0582cf>] kmemleak_alloc+0x34/0x40 [<000000009c99a513>] __kmalloc_cache_noprof+0x208/0x280 [<00000000313b1704>] binder_thread_write+0xdec/0x439c [<000000000cbd33bb>] binder_ioctl+0x1b68/0x22cc [<000000002bbedeeb>] __arm64_sys_ioctl+0x124/0x190 [<00000000b439adee>] invoke_syscall+0x6c/0x254 [<00000000173558fc>] el0_svc_common.constprop.0+0xac/0x230 [<0000000084f72311>] do_el0_svc+0x40/0x58 [<000000008b872457>] el0_svc+0x38/0x78 [<00000000ee778653>] el0t_64_sync_handler+0x120/0x12c [<00000000a8ec61bf>] el0t_64_sync+0x190/0x194 This patch fixes the leak by ensuring that any pending entries in proc->delivered_freeze are freed during binder_deferred_release(). | 5.5 |
Medium |
|
14h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix usage slab after free
[ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147
[ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1
[ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000016] Call Trace:
[ +0.000008] |
7.8 |
High |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix NULL pointer dereference in object->file At present, the object->file has the NULL pointer dereference problem in ondemand-mode. The root cause is that the allocated fd and object->file lifetime are inconsistent, and the user-space invocation to anon_fd uses object->file. Following is the process that triggers the issue: [write fd] [umount] cachefiles_ondemand_fd_write_iter fscache_cookie_state_machine cachefiles_withdraw_cookie if (!file) return -ENOBUFS cachefiles_clean_up_object cachefiles_unmark_inode_in_use fput(object->file) object->file = NULL // file NULL pointer dereference! __cachefiles_write(..., file, ...) Fix this issue by add an additional reference count to the object->file before write/llseek, and decrement after it finished. | 5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
udmabuf: change folios array from kmalloc to kvmalloc
When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine,
page_alloc only support 4MB.
If above this, trigger this warn and return NULL.
udmabuf can change size limit, if change it to 3072(3GB), and then alloc
3GB udmabuf, will fail create.
[ 4080.876581] ------------[ cut here ]------------
[ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350
[ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350
[ 4080.879470] Call Trace:
[ 4080.879473] |
5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix a memleak issue when driver is removed
Running "modprobe amdgpu" the second time (followed by a modprobe -r
amdgpu) causes a call trace like:
[ 845.212163] Memory manager not clean during takedown.
[ 845.212170] WARNING: CPU: 4 PID: 2481 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x2b/0x40
[ 845.212177] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amddrm_buddy(OE) amdxcp(OE) amd_sched(OE) drm_exec drm_suballoc_helper drm_display_helper i2c_algo_bit amdttm(OE) amdkcl(OE) cec rc_core sunrpc qrtr intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi edac_mce_amd snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_usb_audio snd_hda_codec snd_usbmidi_lib kvm_amd snd_hda_core snd_ump mc snd_hwdep kvm snd_pcm snd_seq_midi snd_seq_midi_event irqbypass crct10dif_pclmul snd_rawmidi polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 snd_seq aesni_intel crypto_simd snd_seq_device cryptd snd_timer mfd_aaeon asus_nb_wmi eeepc_wmi joydev asus_wmi snd ledtrig_audio sparse_keymap ccp wmi_bmof input_leds k10temp i2c_piix4 platform_profile rapl soundcore gpio_amdpt mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid ahci xhci_pci igc crc32_pclmul libahci xhci_pci_renesas video
[ 845.212284] wmi [last unloaded: amddrm_ttm_helper(OE)]
[ 845.212290] CPU: 4 PID: 2481 Comm: modprobe Tainted: G W OE 6.8.0-31-generic #31-Ubuntu
[ 845.212296] RIP: 0010:drm_mm_takedown+0x2b/0x40
[ 845.212300] Code: 1f 44 00 00 48 8b 47 38 48 83 c7 38 48 39 f8 75 09 31 c0 31 ff e9 90 2e 86 00 55 48 c7 c7 d0 f6 8e 8a 48 89 e5 e8 f5 db 45 ff <0f> 0b 5d 31 c0 31 ff e9 74 2e 86 00 66 0f 1f 84 00 00 00 00 00 90
[ 845.212302] RSP: 0018:ffffb11302127ae0 EFLAGS: 00010246
[ 845.212305] RAX: 0000000000000000 RBX: ffff92aa5020fc08 RCX: 0000000000000000
[ 845.212307] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 845.212309] RBP: ffffb11302127ae0 R08: 0000000000000000 R09: 0000000000000000
[ 845.212310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[ 845.212312] R13: ffff92aa50200000 R14: ffff92aa5020fb10 R15: ffff92aa5020faa0
[ 845.212313] FS: 0000707dd7c7c080(0000) GS:ffff92b93de00000(0000) knlGS:0000000000000000
[ 845.212316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 845.212318] CR2: 00007d48b0aee200 CR3: 0000000115a58000 CR4: 0000000000f50ef0
[ 845.212320] PKRU: 55555554
[ 845.212321] Call Trace:
[ 845.212323] |
5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup()
During ath12k module removal, in ath12k_core_deinit(),
ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees
the ah->hw as well as all the ar's in it. After this
ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup()
tries to access one of the freed ar's from pending skb.
This is because during mac destroy, driver failed to flush few
data packets, which were accessed later in ath12k_dp_cc_cleanup()
and freed, but using ar from the packet led to this use-after-free.
BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
Write of size 4 at addr ffff888150bd3514 by task modprobe/8926
CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted
6.11.0-rc2-wt-ath+ #1746
Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS
HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Call Trace:
|
7.8 |
High |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Prevent recovery invocation during probe and resume Refactor IPC send and receive functions to allow correct handling of operations that should not trigger a recovery process. Expose ivpu_send_receive_internal(), which is now utilized by the D0i3 entry, DCT initialization, and HWS initialization functions. These functions have been modified to return error codes gracefully, rather than initiating recovery. The updated functions are invoked within ivpu_probe() and ivpu_resume(), ensuring that any errors encountered during these stages result in a proper teardown or shutdown sequence. The previous approach of triggering recovery within these functions could lead to a race condition, potentially causing undefined behavior and kernel crashes due to null pointer dereferences. | 4.7 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_kms: Unplug DRM device before removal Prevent userspace accesses to the DRM device from causing use-after-frees by unplugging the device before we remove it. This causes any further userspace accesses to result in an error without further calls into this driver's internals. | 7.8 |
High |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm: xlnx: zynqmp_disp: layer may be null while releasing layer->info can be null if we have an error on the first layer in zynqmp_disp_create_layers | 5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: Fix potential NULL dereference A recent refactoring was identified by static analysis to cause a potential NULL dereference, fix this! | 5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: coex: check NULL return of kmalloc in btc_fw_set_monreg() kmalloc may fail, return value might be NULL and will cause NULL pointer dereference. Add check NULL return of kmalloc in btc_fw_set_monreg(). | 5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
isofs: avoid memory leak in iocharset
A memleak was found as below:
unreferenced object 0xffff0000d10164d8 (size 8):
comm "pool-udisksd", pid 108217, jiffies 4295408555
hex dump (first 8 bytes):
75 74 66 38 00 cc cc cc utf8....
backtrace (crc de430d31):
[ |
5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Release resources at card release The current 6fire code tries to release the resources right after the call of usb6fire_chip_abort(). But at this moment, the card object might be still in use (as we're calling snd_card_free_when_closed()). For avoid potential UAFs, move the release of resources to the card's private_free instead of the manual call of usb6fire_chip_destroy() at the USB disconnect callback. | 7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: adjust the position to init iso data anchor MediaTek iso data anchor init should be moved to where MediaTek claims iso data interface. If there is an unexpected BT usb disconnect during setup flow, it will cause a NULL pointer crash issue when releasing iso anchor since the anchor wasn't been init yet. Adjust the position to do iso data anchor init. [ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168 [ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168 [ 17.137999] sp : ffffffc0890cb5f0 [ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80 [ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines [ 17.148421] x27: 0000000000000000 [ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0 [ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001 [ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000 [ 17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000 [ 17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001 [ 17.239912] x11: 0000000080150011 x10: 0000000000000002 x9 : 0000000000000001 [ 17.247035] x8 : 0000000000000000 x7 : 0000000000008080 x6 : 8080000000000000 [ 17.254158] x5 : ffffffd33808ebc0 x4 : fffffffe033dcf20 x3 : 0000000080150011 [ 17.261281] x2 : ffffff8087a91400 x1 : 0000000000000000 x0 : ffffff80c0f25588 [ 17.268404] Call trace: [ 17.270841] usb_kill_anchored_urbs+0x60/0x168 [ 17.275274] btusb_mtk_release_iso_intf+0x2c/0xd8 [btusb (HASH:5afe 6)] [ 17.284226] btusb_mtk_disconnect+0x14/0x28 [btusb (HASH:5afe 6)] [ 17.292652] btusb_disconnect+0x70/0x140 [btusb (HASH:5afe 6)] [ 17.300818] usb_unbind_interface+0xc4/0x240 [ 17.305079] device_release_driver_internal+0x18c/0x258 [ 17.310296] device_release_driver+0x1c/0x30 [ 17.314557] bus_remove_device+0x140/0x160 [ 17.318643] device_del+0x1c0/0x330 [ 17.322121] usb_disable_device+0x80/0x180 [ 17.326207] usb_disconnect+0xec/0x300 [ 17.329948] hub_quiesce+0x80/0xd0 [ 17.333339] hub_disconnect+0x44/0x190 [ 17.337078] usb_unbind_interface+0xc4/0x240 [ 17.341337] device_release_driver_internal+0x18c/0x258 [ 17.346551] device_release_driver+0x1c/0x30 [ 17.350810] usb_driver_release_interface+0x70/0x88 [ 17.355677] proc_ioctl+0x13c/0x228 [ 17.359157] proc_ioctl_default+0x50/0x80 [ 17.363155] usbdev_ioctl+0x830/0xd08 [ 17.366808] __arm64_sys_ioctl+0x94/0xd0 [ 17.370723] invoke_syscall+0x6c/0xf8 [ 17.374377] el0_svc_common+0x84/0xe0 [ 17.378030] do_el0_svc+0x20/0x30 [ 17.381334] el0_svc+0x34/0x60 [ 17.384382] el0t_64_sync_handler+0x88/0xf0 [ 17.388554] el0t_64_sync+0x180/0x188 [ 17.392208] Code: f9400677 f100a2f4 54fffea0 d503201f (b8350288) [ 17.398289] ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix use-after-free in device_for_each_child()
Syzbot has reported the following KASAN splat:
BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0
Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980
CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
|
7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: erofs: fix file-backed mounts over FUSE syzbot reported a null-ptr-deref in fuse_read_args_fill: fuse_read_folio+0xb0/0x100 fs/fuse/file.c:905 filemap_read_folio+0xc6/0x2a0 mm/filemap.c:2367 do_read_cache_folio+0x263/0x5c0 mm/filemap.c:3825 read_mapping_folio include/linux/pagemap.h:1011 [inline] erofs_bread+0x34d/0x7e0 fs/erofs/data.c:41 erofs_read_superblock fs/erofs/super.c:281 [inline] erofs_fc_fill_super+0x2b9/0x2500 fs/erofs/super.c:625 Unlike most filesystems, some network filesystems and FUSE need unavoidable valid `file` pointers for their read I/Os [1]. Anyway, those use cases need to be supported too. [1] https://docs.kernel.org/filesystems/vfs.html | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device. | 7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() cpufreq_cpu_get_raw() may return NULL if the cpu is not in policy->cpus cpu mask and it will cause null pointer dereference. | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() cpufreq_cpu_get_raw() may return NULL if the cpu is not in policy->cpus cpu mask and it will cause null pointer dereference, so check NULL for cppc_get_cpu_cost(). | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: riscv: kvm: Fix out-of-bounds array access In kvm_riscv_vcpu_sbi_init() the entry->ext_idx can contain an out-of-bound index. This is used as a special marker for the base extensions, that cannot be disabled. However, when traversing the extensions, that special marker is not checked prior indexing the array. Add an out-of-bounds check to the function. | 7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
BUG: KASAN: slab-use-after-free in __lock_acquire+0x2aca/0x3a20
Read of size 8 at addr ffff8881082d80c8 by task modprobe/25303
Call Trace:
|
7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg() ib_map_mr_sg() allows ULPs to specify NULL as the sg_offset argument. The driver needs to check whether it is a NULL pointer before dereferencing it. | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Move events notifier registration to be after device registration Move pkey change work initialization and cleanup from device resources stage to notifier stage, since this is the stage which handles this work events. Fix a race between the device deregistration and pkey change work by moving MLX5_IB_STAGE_DEVICE_NOTIFIER to be after MLX5_IB_STAGE_IB_REG in order to ensure that the notifier is deregistered before the device during cleanup. Which ensures there are no works that are being executed after the device has already unregistered which can cause the panic below. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 630071 Comm: kworker/1:2 Kdump: loaded Tainted: G W OE --------- --- 5.14.0-162.6.1.el9_1.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 02/27/2023 Workqueue: events pkey_change_handler [mlx5_ib] RIP: 0010:setup_qp+0x38/0x1f0 [mlx5_ib] Code: ee 41 54 45 31 e4 55 89 f5 53 48 89 fb 48 83 ec 20 8b 77 08 65 48 8b 04 25 28 00 00 00 48 89 44 24 18 48 8b 07 48 8d 4c 24 16 <4c> 8b 38 49 8b 87 80 0b 00 00 4c 89 ff 48 8b 80 08 05 00 00 8b 40 RSP: 0018:ffffbcc54068be20 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff954054494128 RCX: ffffbcc54068be36 RDX: ffff954004934000 RSI: 0000000000000001 RDI: ffff954054494128 RBP: 0000000000000023 R08: ffff954001be2c20 R09: 0000000000000001 R10: ffff954001be2c20 R11: ffff9540260133c0 R12: 0000000000000000 R13: 0000000000000023 R14: 0000000000000000 R15: ffff9540ffcb0905 FS: 0000000000000000(0000) GS:ffff9540ffc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010625c001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_gsi_pkey_change+0x20/0x40 [mlx5_ib] process_one_work+0x1e8/0x3c0 worker_thread+0x50/0x3b0 ? rescuer_thread+0x380/0x380 kthread+0x149/0x170 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) mlx5_fwctl(OE) fwctl(OE) ib_uverbs(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlx_compat(OE) psample mlxfw(OE) tls knem(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache netfs qrtr rfkill sunrpc intel_rapl_msr intel_rapl_common rapl hv_balloon hv_utils i2c_piix4 pcspkr joydev fuse ext4 mbcache jbd2 sr_mod sd_mod cdrom t10_pi sg ata_generic pci_hyperv pci_hyperv_intf hyperv_drm drm_shmem_helper drm_kms_helper hv_storvsc syscopyarea hv_netvsc sysfillrect sysimgblt hid_hyperv fb_sys_fops scsi_transport_fc hyperv_keyboard drm ata_piix crct10dif_pclmul crc32_pclmul crc32c_intel libata ghash_clmulni_intel hv_vmbus serio_raw [last unloaded: ib_core] CR2: 0000000000000000 ---[ end trace f6f8be4eae12f7bc ]--- | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: zram: fix NULL pointer in comp_algorithm_show() LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix null-ptr-deref in f2fs_submit_page_bio()
There's issue as follows when concurrently installing the f2fs.ko
module and mounting the f2fs file system:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
RIP: 0010:__bio_alloc+0x2fb/0x6c0 [f2fs]
Call Trace:
|
5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent NULL dereference in nfsd4_process_cb_update() @ses is initialized to NULL. If __nfsd4_find_backchannel() finds no available backchannel session, setup_callback_client() will try to dereference @ses and segfault. | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init()
There's issue as follows:
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
RPC: Unregistered rdma transport module.
RPC: Unregistered rdma backchannel transport module.
BUG: unable to handle page fault for address: fffffbfff80c609a
PGD 123fee067 P4D 123fee067 PUD 123fea067 PMD 10c624067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
RIP: 0010:percpu_counter_destroy_many+0xf7/0x2a0
Call Trace:
|
5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Fix double free issue with interrupt buffer allocation In lan78xx_probe(), the buffer `buf` was being freed twice: once implicitly through `usb_free_urb(dev->urb_intr)` with the `URB_FREE_BUFFER` flag and again explicitly by `kfree(buf)`. This caused a double free issue. To resolve this, reordered `kmalloc()` and `usb_alloc_urb()` calls to simplify the initialization sequence and removed the redundant `kfree(buf)`. Now, `buf` is allocated after `usb_alloc_urb()`, ensuring it is correctly managed by `usb_fill_int_urb()` and freed by `usb_free_urb()` as intended. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount (skb->users) and iucv_sock_recvmsg() does not decrement skb refcount at exit. This results in skb memory leak in skb_queue_purge() and WARN_ON in iucv_sock_destruct() during socket close. To fix this decrease skb refcount by one if MSG_PEEK is set in order to prevent memory leak and WARN_ON. WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv] CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv] [<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv] [<001587c704117a32>] __sk_destruct+0x52/0x550 [<001587c704104a54>] __sock_release+0xa4/0x230 [<001587c704104c0c>] sock_close+0x2c/0x40 [<001587c702c5f5a8>] __fput+0x2e8/0x970 [<001587c7024148c4>] task_work_run+0x1c4/0x2c0 [<001587c7023b0716>] do_exit+0x996/0x1050 [<001587c7023b13aa>] do_group_exit+0x13a/0x360 [<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60 [<001587c7022bccca>] do_syscall+0x27a/0x380 [<001587c7049a6a0c>] __do_syscall+0x9c/0x160 [<001587c7049ce8a8>] system_call+0x70/0x98 Last Breaking-Event-Address: [<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv] | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
This fixes the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353
Read of size 8 at addr ffff888029b4dd18 by task kworker/u9:0/54
CPU: 1 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-01155-gf723224742fc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
|
7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix possible deadlocks
This fixes possible deadlocks like the following caused by
hci_cmd_sync_dequeue causing the destroy function to run:
INFO: task kworker/u19:0:143 blocked for more than 120 seconds.
Tainted: G W O 6.8.0-2024-03-19-intel-next-iLS-24ww14 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u19:0 state:D stack:0 pid:143 tgid:143 ppid:2 flags:0x00004000
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
|
5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tcp: Fix use-after-free of nreq in reqsk_timer_handler(). The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with __inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler(). Then, oreq should be passed to reqsk_put() instead of req; otherwise use-after-free of nreq could happen when reqsk is migrated but the retry attempt failed (e.g. due to timeout). Let's pass oreq to reqsk_put(). | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: realtek: usb: fix NULL deref in rtk_usb2phy_probe In rtk_usb2phy_probe() devm_kzalloc() may return NULL but this returned value is not checked. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: realtek: usb: fix NULL deref in rtk_usb3phy_probe In rtk_usb3phy_probe() devm_kzalloc() may return NULL but this returned value is not checked. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential array underflow in ucsi_ccg_sync_control() The "command" variable can be controlled by the user via debugfs. The worry is that if con_index is zero then "&uc->ucsi->connector[con_index - 1]" would be an array underflow. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix possible resource leak in fw_log_firmware_info() The alg instance should be released under the exception path, otherwise there may be resource leak here. To mitigate this, free the alg instance with crypto_free_shash when kmalloc fails. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in dcn20_program_pipe This commit addresses a null pointer dereference issue in dcn20_program_pipe(). Previously, commit 8e4ed3cf1642 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe") partially fixed the null pointer dereference issue. However, in dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and plane_state is accessed again through pipe_ctx. Multiple if statements directly call attributes of plane_state, leading to potential null pointer dereference issues. This patch adds necessary null checks to ensure stability. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dpp This commit addresses a null pointer dereference issue in hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-audmix: Add NULL check in imx_audmix_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in imx_audmix_probe() is not checked. Add NULL check in imx_audmix_probe(), to handle kernel NULL pointer dereference error. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 Call Trace: free_large_kmalloc ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix crash when unbinding If there is an error during some initialization related to firmware, the function ath12k_dp_cc_cleanup is called to release resources. However this is released again when the device is unbinded (ath12k_pci), and we get: BUG: kernel NULL pointer dereference, address: 0000000000000020 at RIP: 0010:ath12k_dp_cc_cleanup.part.0+0xb6/0x500 [ath12k] Call Trace: ath12k_dp_cc_cleanup ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set to NULL the released structure in ath12k_dp_cc_cleanup at the end. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
io_uring: check for overflows in io_pin_pages
WARNING: CPU: 0 PID: 5834 at io_uring/memmap.c:144 io_pin_pages+0x149/0x180 io_uring/memmap.c:144
CPU: 0 UID: 0 PID: 5834 Comm: syz-executor825 Not tainted 6.12.0-next-20241118-syzkaller #0
Call Trace:
|
5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in SMB request handling A race condition exists between SMB request handling in `ksmbd_conn_handler_loop()` and the freeing of `ksmbd_conn` in the workqueue handler `handle_ksmbd_work()`. This leads to a UAF. - KASAN: slab-use-after-free Read in handle_ksmbd_work - KASAN: slab-use-after-free in rtlock_slowlock_locked This race condition arises as follows: - `ksmbd_conn_handler_loop()` waits for `conn->r_count` to reach zero: `wait_event(conn->r_count_q, atomic_read(&conn->r_count) == 0);` - Meanwhile, `handle_ksmbd_work()` decrements `conn->r_count` using `atomic_dec_return(&conn->r_count)`, and if it reaches zero, calls `ksmbd_conn_free()`, which frees `conn`. - However, after `handle_ksmbd_work()` decrements `conn->r_count`, it may still access `conn->r_count_q` in the following line: `waitqueue_active(&conn->r_count_q)` or `wake_up(&conn->r_count_q)` This results in a UAF, as `conn` has already been freed. The discovery of this UAF can be referenced in the following PR for syzkaller's support for SMB requests. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix NULL ptr deref in crypto_aead_setkey()
Neither SMB3.0 or SMB3.02 supports encryption negotiate context, so
when SMB2_GLOBAL_CAP_ENCRYPTION flag is set in the negotiate response,
the client uses AES-128-CCM as the default cipher. See MS-SMB2
3.3.5.4.
Commit b0abcd65ec54 ("smb: client: fix UAF in async decryption") added
a @server->cipher_type check to conditionally call
smb3_crypto_aead_allocate(), but that check would always be false as
@server->cipher_type is unset for SMB3.02.
Fix the following KASAN splat by setting @server->cipher_type for
SMB3.02 as well.
mount.cifs //srv/share /mnt -o vers=3.02,seal,...
BUG: KASAN: null-ptr-deref in crypto_aead_setkey+0x2c/0x130
Read of size 8 at addr 0000000000000020 by task mount.cifs/1095
CPU: 1 UID: 0 PID: 1095 Comm: mount.cifs Not tainted 6.12.0 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41
04/01/2014
Call Trace:
|
7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Add sanity NULL check for the default mmap fault handler A driver might allow the mmap access before initializing its runtime->dma_area properly. Add a proper NULL check before passing to virt_to_page() for avoiding a panic. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of signing key Customers have reported use-after-free in @ses->auth_key.response with SMB2.1 + sign mounts which occurs due to following race: task A task B cifs_mount() dfs_mount_share() get_session() cifs_mount_get_session() cifs_send_recv() cifs_get_smb_ses() compound_send_recv() cifs_setup_session() smb2_setup_request() kfree_sensitive() smb2_calc_signature() crypto_shash_setkey() *UAF* Fix this by ensuring that we have a valid @ses->auth_key.response by checking whether @ses->ses_status is SES_GOOD or SES_EXITING with @ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()"), we made sure to call ->logoff() only when @ses was known to be good (e.g. valid ->auth_key.response), so it's safe to access signing key when @ses->ses_status == SES_EXITING. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipc: fix memleak if msg_init_ns failed in create_ipc_ns
Percpu memory allocation may failed during create_ipc_ns however this
fail is not handled properly since ipc sysctls and mq sysctls is not
released properly. Fix this by release these two resource when failure.
Here is the kmemleak stack when percpu failed:
unreferenced object 0xffff88819de2a600 (size 512):
comm "shmem_2nstest", pid 120711, jiffies 4300542254
hex dump (first 32 bytes):
60 aa 9d 84 ff ff ff ff fc 18 48 b2 84 88 ff ff `.........H.....
04 00 00 00 a4 01 00 00 20 e4 56 81 ff ff ff ff ........ .V.....
backtrace (crc be7cba35):
[ |
5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSv4.0: Fix a use-after-free problem in the asynchronous open() Yang Erkun reports that when two threads are opening files at the same time, and are forced to abort before a reply is seen, then the call to nfs_release_seqid() in nfs4_opendata_free() can result in a use-after-free of the pointer to the defunct rpc task of the other thread. The fix is to ensure that if the RPC call is aborted before the call to nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid() in nfs4_open_release() before the rpc_task is freed. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit After an insertion in TNC, the tree might split and cause a node to change its `znode->parent`. A further deletion of other nodes in the tree (which also could free the nodes), the aforementioned node's `znode->cparent` could still point to a freed node. This `znode->cparent` may not be updated when getting nodes to commit in `ubifs_tnc_start_commit()`. This could then trigger a use-after-free when accessing the `znode->cparent` in `write_index()` in `ubifs_tnc_end_commit()`. This can be triggered by running rm -f /etc/test-file.bin dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then reports: BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950 Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153 Call trace: dump_backtrace+0x0/0x340 show_stack+0x18/0x24 dump_stack_lvl+0x9c/0xbc print_address_description.constprop.0+0x74/0x2b0 kasan_report+0x1d8/0x1f0 kasan_check_range+0xf8/0x1a0 memcpy+0x84/0xf4 ubifs_tnc_end_commit+0xa5c/0x1950 do_commit+0x4e0/0x1340 ubifs_bg_thread+0x234/0x2e0 kthread+0x36c/0x410 ret_from_fork+0x10/0x20 Allocated by task 401: kasan_save_stack+0x38/0x70 __kasan_kmalloc+0x8c/0xd0 __kmalloc+0x34c/0x5bc tnc_insert+0x140/0x16a4 ubifs_tnc_add+0x370/0x52c ubifs_jnl_write_data+0x5d8/0x870 do_writepage+0x36c/0x510 ubifs_writepage+0x190/0x4dc __writepage+0x58/0x154 write_cache_pages+0x394/0x830 do_writepages+0x1f0/0x5b0 filemap_fdatawrite_wbc+0x170/0x25c file_write_and_wait_range+0x140/0x190 ubifs_fsync+0xe8/0x290 vfs_fsync_range+0xc0/0x1e4 do_fsync+0x40/0x90 __arm64_sys_fsync+0x34/0x50 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 Freed by task 403: kasan_save_stack+0x38/0x70 kasan_set_track+0x28/0x40 kasan_set_free_info+0x28/0x4c __kasan_slab_free+0xd4/0x13c kfree+0xc4/0x3a0 tnc_delete+0x3f4/0xe40 ubifs_tnc_remove_range+0x368/0x73c ubifs_tnc_remove_ino+0x29c/0x2e0 ubifs_jnl_delete_inode+0x150/0x260 ubifs_evict_inode+0x1d4/0x2e4 evict+0x1c8/0x450 iput+0x2a0/0x3c4 do_unlinkat+0x2cc/0x490 __arm64_sys_unlinkat+0x90/0x100 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free when a node becomes root in TNC but still has a `cparent` to an already freed node. More specifically, consider the following TNC: zroot / / zp1 / / zn Inserting a new node `zn_new` with a key smaller then `zn` will trigger a split in `tnc_insert()` if `zp1` is full: zroot / \ / \ zp1 zp2 / \ / \ zn_new zn `zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still points to `zp1`. Now, consider a removal of all the nodes _except_ `zn`. Just when `tnc_delete()` is about to delete `zroot` and `zp2`: zroot \ \ zp2 \ \ zn `zroot` and `zp2` get freed and the tree collapses: zn `zn` now becomes the new `zroot`. `get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and `write_index()` will check its `znode->cparent` that wrongly points to the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called with `znode->cparent->zbranch[znode->iip].hash` that triggers the use-after-free! Fix this by explicitly setting `znode->cparent` to `NULL` in `get_znodes_to_commit()` for the root node. The search for the dirty nodes ---truncated--- | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: block: fix uaf for flush rq while iterating tags blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [in ---truncated--- | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0
Read of size 1 at addr ffff888111f322cd by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
Call Trace:
|
7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix bfqq uaf in bfq_limit_depth()
Set new allocated bfqq to bic or remove freed bfqq from bic are both
protected by bfqd->lock, however bfq_limit_depth() is deferencing bfqq
from bic without the lock, this can lead to UAF if the io_context is
shared by multiple tasks.
For example, test bfq with io_uring can trigger following UAF in v6.6:
==================================================================
BUG: KASAN: slab-use-after-free in bfqq_group+0x15/0x50
Call Trace:
|
7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sh: intc: Fix use-after-free bug in register_intc_controller() In the error handling for this function, d is freed without ever removing it from intc_list which would lead to a use after free. To fix this, let's only add it to the list after everything has succeeded. | 7.8 |
High |
|
11h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: EDAC/bluefield: Fix potential integer overflow The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as 32-bits wide the left-shift operation truncates the upper 16 bits of information during the calculation of the SMC argument. The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any potential integer overflow, i.e. loss of data from upper 16 bits. | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Check the DVFS OPP count returned by the firmware Fix a kernel crash with the below call trace when the SCPI firmware returns OPP count of zero. dvfs_info.opp_count may be zero on some platforms during the reboot test, and the kernel will crash after dereferencing the pointer to kcalloc(info->count, sizeof(*opp), GFP_KERNEL). | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 | Mem abort info: | ESR = 0x96000004 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c | [0000000000000028] pgd=0000000000000000 | Internal error: Oops: 96000004 [#1] SMP | scpi-hwmon: probe of PHYT000D:00 failed with error -110 | Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c) | CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1 | Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | lr : clk_register+0x438/0x720 | Call trace: | scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | devm_clk_hw_register+0x50/0xa0 | scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi] | scpi_clocks_probe+0x528/0x70c [clk_scpi] | platform_drv_probe+0x58/0xa8 | really_probe+0x260/0x3d0 | driver_probe_device+0x12c/0x148 | device_driver_attach+0x74/0x98 | __driver_attach+0xb4/0xe8 | bus_for_each_dev+0x88/0xe0 | driver_attach+0x30/0x40 | bus_add_driver+0x178/0x2b0 | driver_register+0x64/0x118 | __platform_driver_register+0x54/0x60 | scpi_clocks_driver_init+0x24/0x1000 [clk_scpi] | do_one_initcall+0x54/0x220 | do_init_module+0x54/0x1c8 | load_module+0x14a4/0x1668 | __se_sys_finit_module+0xf8/0x110 | __arm64_sys_finit_module+0x24/0x30 | el0_svc_common+0x78/0x170 | el0_svc_handler+0x38/0x78 | el0_svc+0x8/0x340 | Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820) | ---[ end trace 06feb22469d89fa8 ]--- | Kernel panic - not syncing: Fatal exception | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x10,a0002008 | Memory Limit: none | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
|
7.8 |
High |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix uninitialized value in ocfs2_file_read_iter() Syzbot has reported the following KMSAN splat: BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80 ocfs2_file_read_iter+0x9a4/0xf80 __io_read+0x8d4/0x20f0 io_read+0x3e/0xf0 io_issue_sqe+0x42b/0x22c0 io_wq_submit_work+0xaf9/0xdc0 io_worker_handle_work+0xd13/0x2110 io_wq_worker+0x447/0x1410 ret_from_fork+0x6f/0x90 ret_from_fork_asm+0x1a/0x30 Uninit was created at: __alloc_pages_noprof+0x9a7/0xe00 alloc_pages_mpol_noprof+0x299/0x990 alloc_pages_noprof+0x1bf/0x1e0 allocate_slab+0x33a/0x1250 ___slab_alloc+0x12ef/0x35e0 kmem_cache_alloc_bulk_noprof+0x486/0x1330 __io_alloc_req_refill+0x84/0x560 io_submit_sqes+0x172f/0x2f30 __se_sys_io_uring_enter+0x406/0x41c0 __x64_sys_io_uring_enter+0x11f/0x1a0 x64_sys_call+0x2b54/0x3ba0 do_syscall_64+0xcd/0x1e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Since an instance of 'struct kiocb' may be passed from the block layer with 'private' field uninitialized, introduce 'ocfs2_iocb_init_rw_locked()' and use it from where 'ocfs2_dio_end_io()' might take care, i.e. in 'ocfs2_file_read_iter()' and 'ocfs2_file_write_iter()'. | 7.1 |
High |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: clk: clk-apple-nco: Add NULL check in applnco_probe Add NULL check in applnco_probe, to handle kernel NULL pointer dereference error. | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: svcrdma: Address an integer overflow Dan Carpenter reports: > Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data > structure") from Jun 22, 2020 (linux-next), leads to the following > Smatch static checker warning: > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk() > warn: potential user controlled sizeof overflow 'segcount * 4 * 4' > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c > 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt) > 489 { > 490 u32 segcount; > 491 __be32 *p; > 492 > 493 if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount)) > ^^^^^^^^ > > 494 return false; > 495 > 496 /* A bogus segcount causes this buffer overflow check to fail. */ > 497 p = xdr_inline_decode(&rctxt->rc_stream, > --> 498 segcount * rpcrdma_segment_maxsz * sizeof(*p)); > > > segcount is an untrusted u32. On 32bit systems anything >= SIZE_MAX / 16 will > have an integer overflow and some those values will be accepted by > xdr_inline_decode(). | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out of bounds reads when finding clock sources The current USB-audio driver code doesn't check bLength of each descriptor at traversing for clock descriptors. That is, when a device provides a bogus descriptor with a shorter bLength, the driver might hit out-of-bounds reads. For addressing it, this patch adds sanity checks to the validator functions for the clock descriptor traversal. When the descriptor length is shorter than expected, it's skipped in the loop. For the clock source and clock multiplier descriptors, we can just check bLength against the sizeof() of each descriptor type. OTOH, the clock selector descriptor of UAC2 and UAC3 has an array of bNrInPins elements and two more fields at its tail, hence those have to be checked in addition to the sizeof() check. | 7.1 |
High |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: glink: fix off-by-one in connector_status UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS. Correct the condition in the pmic_glink_ucsi_connector_status() callback, fixing Type-C orientation reporting for the third USB-C connector. | 4.6 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent a potential integer overflow If the tag length is >= U32_MAX - 3 then the "length + 4" addition can result in an integer overflow. Address this by splitting the decoding into several steps so that decode_cb_compound4res() does not have to perform arithmetic on the unsafe length value. | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: um: Fix potential integer overflow during physmem setup This issue happens when the real map size is greater than LONG_MAX, which can be easily triggered on UML/i386. | 5.5 |
Medium |
|
09h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: initramfs: avoid filename buffer overrun The initramfs filename field is defined in Documentation/driver-api/early-userspace/buffer-format.rst as: 37 cpio_file := ALGN(4) + cpio_header + filename + "\0" + ALGN(4) + data ... 55 ============= ================== ========================= 56 Field name Field size Meaning 57 ============= ================== ========================= ... 70 c_namesize 8 bytes Length of filename, including final \0 When extracting an initramfs cpio archive, the kernel's do_name() path handler assumes a zero-terminated path at @collected, passing it directly to filp_open() / init_mkdir() / init_mknod(). If a specially crafted cpio entry carries a non-zero-terminated filename and is followed by uninitialized memory, then a file may be created with trailing characters that represent the uninitialized memory. The ability to create an initramfs entry would imply already having full control of the system, so the buffer overrun shouldn't be considered a security vulnerability. Append the output of the following bash script to an existing initramfs and observe any created /initramfs_test_fname_overrunAA* path. E.g. ./reproducer.sh | gzip >> /myinitramfs It's easiest to observe non-zero uninitialized memory when the output is gzipped, as it'll overflow the heap allocated @out_buf in __gunzip(), rather than the initrd_start+initrd_size block. ---- reproducer.sh ---- nilchar="A" # change to "\0" to properly zero terminate / pad magic="070701" ino=1 mode=$(( 0100777 )) uid=0 gid=0 nlink=1 mtime=1 filesize=0 devmajor=0 devminor=1 rdevmajor=0 rdevminor=0 csum=0 fname="initramfs_test_fname_overrun" namelen=$(( ${#fname} + 1 )) # plus one to account for terminator printf "%s%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%s" \ $magic $ino $mode $uid $gid $nlink $mtime $filesize \ $devmajor $devminor $rdevmajor $rdevminor $namelen $csum $fname termpadlen=$(( 1 + ((4 - ((110 + $namelen) & 3)) % 4) )) printf "%.s${nilchar}" $(seq 1 $termpadlen) ---- reproducer.sh ---- Symlink filename fields handled in do_symlink() won't overrun past the data segment, due to the explicit zero-termination of the symlink target. Fix filename buffer overrun by aborting the initramfs FSM if any cpio entry doesn't carry a zero-terminator at the expected (name_len - 1) offset. | 7.8 |
High |
|
09h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add missing range check in bitmap_ip_uadt When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists, the values of ip and ip_to are slightly swapped. Therefore, the range check for ip should be done later, but this part is missing and it seems that the vulnerability occurs. So we should add missing range checks and remove unnecessary range checks. | 7.8 |
High |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix possible UAF in sctp_v6_available()
A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints
that sctp_v6_available() is calling dev_get_by_index_rcu()
and ipv6_chk_addr() without holding rcu.
[1]
=============================
WARNING: suspicious RCU usage
6.12.0-rc5-virtme #1216 Tainted: G W
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by sctp_hello/31495:
#0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp
stack backtrace:
CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
|
7.8 |
High |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix incorrect page refcounting The kTLS tx handling code is using a mix of get_page() and page_ref_inc() APIs to increment the page reference. But on the release path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used. This is an issue when using pages from large folios: the get_page() references are stored on the folio page while the page_ref_inc() references are stored directly in the given page. On release the folio page will be dereferenced too many times. This was found while doing kTLS testing with sendfile() + ZC when the served file was read from NFS on a kernel with NFS large folios support (commit 49b29a573da8 ("nfs: add support for large folios")). | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ARM: fix cacheflush with PAN It seems that the cacheflush syscall got broken when PAN for LPAE was implemented. User access was not enabled around the cache maintenance instructions, causing them to fault. | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are myriad bugs in the implementation, some of which are fatal to the guest, and others which put the stability and health of the host at risk. For guest fatalities, the most glaring issue is that KVM fails to ensure tracing is disabled, and *stays* disabled prior to VM-Enter, which is necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing is enabled (enforced via a VMX consistency check). Per the SDM: If the logical processor is operating with Intel PT enabled (if IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load IA32_RTIT_CTL" VM-entry control must be 0. On the host side, KVM doesn't validate the guest CPUID configuration provided by userspace, and even worse, uses the guest configuration to decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring guest CPUID to enumerate more address ranges than are supported in hardware will result in KVM trying to passthrough, save, and load non-existent MSRs, which generates a variety of WARNs, ToPA ERRORs in the host, a potential deadlock, etc. | 6.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: correct remove path The check condition should be 'i < bc->onecell_data.num_domains', not 'bc->onecell_data.num_domains' which will make the look never finish and cause kernel panic. Also disable runtime to address "imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!" | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle dml allocation failure to avoid crash [Why] In the case where a dml allocation fails for any reason, the current state's dml contexts would no longer be valid. Then subsequent calls dc_state_copy_internal would shallow copy invalid memory and if the new state was released, a double free would occur. [How] Reset dml pointers in new_state to NULL and avoid invalid pointer (cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c) | 7.8 |
High |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix "Missing outer runtime PM protection" warning Fix the following drm_WARN: [953.586396] xe 0000:00:02.0: [drm] Missing outer runtime PM protection ... <4> [953.587090] ? xe_pm_runtime_get_noresume+0x8d/0xa0 [xe] <4> [953.587208] guc_exec_queue_add_msg+0x28/0x130 [xe] <4> [953.587319] guc_exec_queue_fini+0x3a/0x40 [xe] <4> [953.587425] xe_exec_queue_destroy+0xb3/0xf0 [xe] <4> [953.587515] xe_oa_release+0x9c/0xc0 [xe] (cherry picked from commit b107c63d2953907908fd0cafb0e543b3c3167b75) | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: fix data-races around sk->sk_forward_alloc
Syzkaller reported this warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:inet_sock_destruct+0x1c5/0x1e0
Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00
RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206
RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007
RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00
RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007
R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00
R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78
FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
4.7 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mptcp: error out earlier on disconnect
Eric reported a division by zero splat in the MPTCP protocol:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted
6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163
Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8
0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mptcp: cope racing subflow creation in mptcp_rcv_space_adjust Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf(). | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fs, lock FTE when checking if active
The referenced commits introduced a two-step process for deleting FTEs:
- Lock the FTE, delete it from hardware, set the hardware deletion function
to NULL and unlock the FTE.
- Lock the parent flow group, delete the software copy of the FTE, and
remove it from the xarray.
However, this approach encounters a race condition if a rule with the same
match value is added simultaneously. In this scenario, fs_core may set the
hardware deletion function to NULL prematurely, causing a panic during
subsequent rule deletions.
To prevent this, ensure the active flag of the FTE is checked under a lock,
which will prevent the fs_core layer from attaching a new steering rule to
an FTE that is in the process of deletion.
[ 438.967589] MOSHE: 2496 mlx5_del_flow_rules del_hw_func
[ 438.968205] ------------[ cut here ]------------
[ 438.968654] refcount_t: decrement hit 0; leaking memory.
[ 438.969249] WARNING: CPU: 0 PID: 8957 at lib/refcount.c:31 refcount_warn_saturate+0xfb/0x110
[ 438.970054] Modules linked in: act_mirred cls_flower act_gact sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core zram zsmalloc fuse [last unloaded: cls_flower]
[ 438.973288] CPU: 0 UID: 0 PID: 8957 Comm: tc Not tainted 6.12.0-rc1+ #8
[ 438.973888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 438.974874] RIP: 0010:refcount_warn_saturate+0xfb/0x110
[ 438.975363] Code: 40 66 3b 82 c6 05 16 e9 4d 01 01 e8 1f 7c a0 ff 0f 0b c3 cc cc cc cc 48 c7 c7 10 66 3b 82 c6 05 fd e8 4d 01 01 e8 05 7c a0 ff <0f> 0b c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90
[ 438.976947] RSP: 0018:ffff888124a53610 EFLAGS: 00010286
[ 438.977446] RAX: 0000000000000000 RBX: ffff888119d56de0 RCX: 0000000000000000
[ 438.978090] RDX: ffff88852c828700 RSI: ffff88852c81b3c0 RDI: ffff88852c81b3c0
[ 438.978721] RBP: ffff888120fa0e88 R08: 0000000000000000 R09: ffff888124a534b0
[ 438.979353] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888119d56de0
[ 438.979979] R13: ffff888120fa0ec0 R14: ffff888120fa0ee8 R15: ffff888119d56de0
[ 438.980607] FS: 00007fe6dcc0f800(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
[ 438.983984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 438.984544] CR2: 00000000004275e0 CR3: 0000000186982001 CR4: 0000000000372eb0
[ 438.985205] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 438.985842] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 438.986507] Call Trace:
[ 438.986799] |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: CT: Fix null-ptr-deref in add rule err flow
In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add()
callback returns error, zone_rule->attr is used uninitiated. Fix it to
use attr which has the needed pointer value.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000110
RIP: 0010:mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core]
…
Call Trace:
|
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
virtio/vsock: Fix accept_queue memory leak
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[ |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix sk_error_queue memory leak
Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.
unreferenced object 0xffff8881028beb00 (size 224):
comm "vsock_test", pid 1218, jiffies 4294694897
hex dump (first 32 bytes):
90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!.....
00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!.....
backtrace (crc 6c7031ca):
[ |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Improve MSG_ZEROCOPY error handling Add a missing kfree_skb() to prevent memory leaks. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix handling of partial GPU mapping of BOs
This commit fixes the bug in the handling of partial mapping of the
buffer objects to the GPU, which caused kernel warnings.
Panthor didn't correctly handle the case where the partial mapping
spanned multiple scatterlists and the mapping offset didn't point
to the 1st page of starting scatterlist. The offset variable was
not cleared after reaching the starting scatterlist.
Following warning messages were seen.
WARNING: CPU: 1 PID: 650 at drivers/iommu/io-pgtable-arm.c:659 __arm_lpae_unmap+0x254/0x5a0
|
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid null_ptr_deref in vmw_framebuffer_surface_create_handle The 'vmw_user_object_buffer' function may return NULL with incorrect inputs. To avoid possible null pointer dereference, add a check whether the 'bo' is NULL in the vmw_framebuffer_surface_create_handle. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client A number of Zen4 client SoCs advertise the ability to use virtualized VMLOAD/VMSAVE, but using these instructions is reported to be a cause of a random host reboot. These instructions aren't intended to be advertised on Zen4 client so clear the capability. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm: fix NULL pointer dereference in alloc_pages_bulk_noprof We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in alloc_pages_bulk_noprof() when the task is migrated between cpusets. When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be ¤t->mems_allowed. when first_zones_zonelist() is called to find preferred_zoneref, the ac->nodemask may be modified concurrently if the task is migrated between different cpusets. Assuming we have 2 NUMA Node, when traversing Node1 in ac->zonelist, the nodemask is 2, and when traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the ac->preferred_zoneref points to NULL zone. In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading to NULL pointer dereference. __alloc_pages_noprof() fixes this issue by checking NULL pointer in commit ea57485af8f4 ("mm, page_alloc: fix check for NULL preferred_zone") and commit df76cee6bbeb ("mm, page_alloc: remove redundant checks from alloc fastpath"). To fix it, check NULL pointer for preferred_zoneref->zone. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: uncache inode which has failed entering the group
Syzbot has reported the following BUG:
kernel BUG at fs/ocfs2/uptodate.c:509!
...
Call Trace:
|
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mm/mremap: fix address wraparound in move_page_tables()
On 32-bit platforms, it is possible for the expression `len + old_addr <
old_end` to be false-positive if `len + old_addr` wraps around.
`old_addr` is the cursor in the old range up to which page table entries
have been moved; so if the operation succeeded, `old_addr` is the *end* of
the old region, and adding `len` to it can wrap.
The overflow causes mremap() to mistakenly believe that PTEs have been
copied; the consequence is that mremap() bails out, but doesn't move the
PTEs back before the new VMA is unmapped, causing anonymous pages in the
region to be lost. So basically if userspace tries to mremap() a
private-anon region and hits this bug, mremap() will return an error and
the private-anon region's contents appear to have been zeroed.
The idea of this check is that `old_end - len` is the original start
address, and writing the check that way also makes it easier to read; so
fix the check by rearranging the comparison accordingly.
(An alternate fix would be to refactor this function by introducing an
"orig_old_start" variable or such.)
Tested in a VM with a 32-bit X86 kernel; without the patch:
```
user@horn:~/big_mremap$ cat test.c
#define _GNU_SOURCE
#include |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vp_vdpa: fix id_table array not null terminated error Allocate one extra virtio_device_id as null terminator, otherwise vdpa_mgmtdev_get_classes() may iterate multiple times and visit undefined memory. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nommu: pass NULL argument to vma_iter_prealloc() When deleting a vma entry from a maple tree, it has to pass NULL to vma_iter_prealloc() in order to calculate internal state of the tree, but it passed a wrong argument. As a result, nommu kernels crashed upon accessing a vma iterator, such as acct_collect() reading the size of vma entries after do_munmap(). This commit fixes this issue by passing a right argument to the preallocation call. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust VSDB parser for replay feature At some point, the IEEE ID identification for the replay check in the AMD EDID was added. However, this check causes the following out-of-bounds issues when using KASAN: [ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu] [ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383 ... [ 27.821207] Memory state around the buggy address: [ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821243] ^ [ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821268] ================================================================== This is caused because the ID extraction happens outside of the range of the edid lenght. This commit addresses this issue by considering the amd_vsdb_block size. (cherry picked from commit b7e381b1ccd5e778e3d9c44c669ad38439a861d8) | 7.1 |
High |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args() The "arg->vec_len" variable is a u64 that comes from the user at the start of the function. The "arg->vec_len * sizeof(struct page_region))" multiplication can lead to integer wrapping. Use size_mul() to avoid that. Also the size_add/mul() functions work on unsigned long so for 32bit systems we need to ensure that "arg->vec_len" fits in an unsigned long. | 5.5 |
Medium |
|
07h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format This can lead to out of bounds writes since frames of this type were not taken into account when calculating the size of the frames buffer in uvc_parse_streaming. | 7.8 |
High |
|
07h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer When hvs is released, there is a possibility that vsk->trans may not be initialized to NULL, which could lead to a dangling pointer. This issue is resolved by initializing vsk->trans to NULL. | 7.8 |
High |
|
21h21 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs: Fix uninitialized value issue in from_kuid and from_kgid ocfs2_setattr() uses attr->ia_mode, attr->ia_uid and attr->ia_gid in a trace point even though ATTR_MODE, ATTR_UID and ATTR_GID aren't set. Initialize all fields of newattrs to avoid uninitialized variables, by checking if ATTR_MODE, ATTR_UID, ATTR_GID are initialized, otherwise 0. | 5.5 |
Medium |
|
21h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm: resolve faulty mmap_region() error path behaviour The mmap_region() function is somewhat terrifying, with spaghetti-like control flow and numerous means by which issues can arise and incomplete state, memory leaks and other unpleasantness can occur. A large amount of the complexity arises from trying to handle errors late in the process of mapping a VMA, which forms the basis of recently observed issues with resource leaks and observable inconsistent state. Taking advantage of previous patches in this series we move a number of checks earlier in the code, simplifying things by moving the core of the logic into a static internal function __mmap_region(). Doing this allows us to perform a number of checks up front before we do any real work, and allows us to unwind the writable unmap check unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE validation unconditionally also. We move a number of things here: 1. We preallocate memory for the iterator before we call the file-backed memory hook, allowing us to exit early and avoid having to perform complicated and error-prone close/free logic. We carefully free iterator state on both success and error paths. 2. The enclosing mmap_region() function handles the mapping_map_writable() logic early. Previously the logic had the mapping_map_writable() at the point of mapping a newly allocated file-backed VMA, and a matching mapping_unmap_writable() on success and error paths. We now do this unconditionally if this is a file-backed, shared writable mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however doing so does not invalidate the seal check we just performed, and we in any case always decrement the counter in the wrapper. We perform a debug assert to ensure a driver does not attempt to do the opposite. 3. We also move arch_validate_flags() up into the mmap_region() function. This is only relevant on arm64 and sparc64, and the check is only meaningful for SPARC with ADI enabled. We explicitly add a warning for this arch if a driver invalidates this check, though the code ought eventually to be fixed to eliminate the need for this. With all of these measures in place, we no longer need to explicitly close the VMA on error paths, as we place all checks which might fail prior to a call to any driver mmap hook. This eliminates an entire class of errors, makes the code easier to reason about and more robust. | 7.8 |
High |
|
18h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
virtio_pci: Fix admin vq cleanup by using correct info pointer
vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq
resources by virtio_pci_vq_info pointer. The info pointer of admin
vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[].
Using the info pointer from vp_dev->vqs[] for admin vq causes a
kernel NULL pointer dereference bug.
In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer
from vp_dev->admin_vq.info for admin vq to clean up the resources.
Also make info ptr as argument of vp_del_vq() to be symmetric with
vp_setup_vq().
vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace:
==================================================================
BUG: kernel NULL pointer dereference, address:0000000000000000
...
CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1
RIP: 0010:vp_reset+0x57/0x90 [virtio_pci]
Call Trace:
|
5.5 |
Medium |
|
18h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx As the introduction of the support for vsock and unix sockets in sockmap, tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK. vsock and af_unix sockets have vsock_sock and unix_sock instead of inet_connection_sock. For these sockets, tls_get_ctx may return an invalid pointer and cause page fault in function tls_sw_ctx_rx. BUG: unable to handle page fault for address: 0000000000040030 Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:sk_psock_strp_data_ready+0x23/0x60 Call Trace: ? __die+0x81/0xc3 ? no_context+0x194/0x350 ? do_page_fault+0x30/0x110 ? async_page_fault+0x3e/0x50 ? sk_psock_strp_data_ready+0x23/0x60 virtio_transport_recv_pkt+0x750/0x800 ? update_load_avg+0x7e/0x620 vsock_loopback_work+0xd0/0x100 process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? __kthread_cancel_work+0x40/0x40 ret_from_fork+0x1f/0x40 v2: - Add IS_ICSK check v3: - Update the commits in Fixes | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i40e: fix race condition by adding filter's intermediate sync state Fix a race condition in the i40e driver that leads to MAC/VLAN filters becoming corrupted and leaking. Address the issue that occurs under heavy load when multiple threads are concurrently modifying MAC/VLAN filters by setting mac and port VLAN. 1. Thread T0 allocates a filter in i40e_add_filter() within i40e_ndo_set_vf_port_vlan(). 2. Thread T1 concurrently frees the filter in __i40e_del_filter() within i40e_ndo_set_vf_mac(). 3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which refers to the already freed filter memory, causing corruption. Reproduction steps: 1. Spawn multiple VFs. 2. Apply a concurrent heavy load by running parallel operations to change MAC addresses on the VFs and change port VLANs on the host. 3. Observe errors in dmesg: "Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX, please set promiscuous on manually for VF XX". Exact code for stable reproduction Intel can't open-source now. The fix involves implementing a new intermediate filter state, I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list. These filters cannot be deleted from the hash list directly but must be removed using the full process. | 4.7 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix possible exec queue leak in exec IOCTL In a couple of places after an exec queue is looked up the exec IOCTL returns on input errors without dropping the exec queue ref. Fix this ensuring the exec queue ref is dropped on input error. (cherry picked from commit 07064a200b40ac2195cb6b7b779897d9377e5e6f) | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Drop VM dma-resv lock on xe_sync_in_fence_get failure in exec IOCTL Upon failure all locks need to be dropped before returning to the user. (cherry picked from commit 7d1a4258e602ffdce529f56686925034c1b3b095) | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tpm: Lock TPM chip in tpm_pm_suspend() first Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy according, as this leaves window for tpm_hwrng_read() to be called while the operation is in progress. The recent bug report gives also evidence of this behaviour. Aadress this by locking the TPM chip before checking any chip->flags both in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED check inside tpm_get_random() so that it will be always checked only when the lock is reserved. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Break an object reference loop When remaining resources are being cleaned up on driver close, outstanding VM mappings may result in resources being leaked, due to an object reference loop, as shown below, with each object (or set of objects) referencing the object below it: PVR GEM Object GPU scheduler "finished" fence GPU scheduler “scheduled” fence PVR driver “done” fence PVR Context PVR VM Context PVR VM Mappings PVR GEM Object The reference that the PVR VM Context has on the VM mappings is a soft one, in the sense that the freeing of outstanding VM mappings is done as part of VM context destruction; no reference counts are involved, as is the case for all the other references in the loop. To break the reference loop during cleanup, free the outstanding VM mappings before destroying the PVR Context associated with the VM context. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and txbuf_len are uninitialized. This commit stops to print uninitialized value and misleading/false data. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: virtio_net: Add hash_key_length check Add hash_key_length check in virtnet_probe() to avoid possible out of bound errors when setting/reading the hash key. | 7.1 |
High |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: ar0521: don't overflow when checking PLL values The PLL checks are comparing 64 bit integers with 32 bit ones, as reported by Coverity. Depending on the values of the variables, this may underflow. Fix it ensuring that both sides of the expression are u64. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Lock XArray when getting entries for the VM Similar to commit cac075706f29 ("drm/panthor: Fix race when converting group handle to group object") we need to use the XArray's internal locking when retrieving a vm pointer from there. v2: Removed part of the patch that was trying to protect fetching the heap pointer from XArray, as that operation is protected by the @pool->lock. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/thp: fix deferred split unqueue naming and locking Recent changes are putting more pressure on THP deferred split queues: under load revealing long-standing races, causing list_del corruptions, "Bad page state"s and worse (I keep BUGs in both of those, so usually don't get to see how badly they end up without). The relevant recent changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin, improved swap allocation, and underused THP splitting. Before fixing locking: rename misleading folio_undo_large_rmappable(), which does not undo large_rmappable, to folio_unqueue_deferred_split(), which is what it does. But that and its out-of-line __callee are mm internals of very limited usability: add comment and WARN_ON_ONCEs to check usage; and return a bool to say if a deferred split was unqueued, which can then be used in WARN_ON_ONCEs around safety checks (sparing callers the arcane conditionals in __folio_unqueue_deferred_split()). Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all of whose callers now call it beforehand (and if any forget then bad_page() will tell) - except for its caller put_pages_list(), which itself no longer has any callers (and will be deleted separately). Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0 without checking and unqueueing a THP folio from deferred split list; which is unfortunate, since the split_queue_lock depends on the memcg (when memcg is enabled); so swapout has been unqueueing such THPs later, when freeing the folio, using the pgdat's lock instead: potentially corrupting the memcg's list. __remove_mapping() has frozen refcount to 0 here, so no problem with calling folio_unqueue_deferred_split() before resetting memcg_data. That goes back to 5.4 commit 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware"): which included a check on swapcache before adding to deferred queue, but no check on deferred queue before adding THP to swapcache. That worked fine with the usual sequence of events in reclaim (though there were a couple of rare ways in which a THP on deferred queue could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split underused THPs") avoids splitting underused THPs in reclaim, which makes swapcache THPs on deferred queue commonplace. Keep the check on swapcache before adding to deferred queue? Yes: it is no longer essential, but preserves the existing behaviour, and is likely to be a worthwhile optimization (vmstat showed much more traffic on the queue under swapping load if the check was removed); update its comment. Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing folio->memcg_data without checking and unqueueing a THP folio from the deferred list, sometimes corrupting "from" memcg's list, like swapout. Refcount is non-zero here, so folio_unqueue_deferred_split() can only be used in a WARN_ON_ONCE to validate the fix, which must be done earlier: mem_cgroup_move_charge_pte_range() first try to split the THP (splitting of course unqueues), or skip it if that fails. Not ideal, but moving charge has been requested, and khugepaged should repair the THP later: nobody wants new custom unqueueing code just for this deprecated case. The 87eaceb3faa5 commit did have the code to move from one deferred list to another (but was not conscious of its unsafety while refcount non-0); but that was removed by 5.6 commit fac0516b5534 ("mm: thp: don't need care deferred split queue in memcg charge move path"), which argued that the existence of a PMD mapping guarantees that the THP cannot be on a deferred list. As above, false in rare cases, and now commonly false. Backport to 6.11 should be straightforward. Earlier backports must take care that other _deferred_list fixes and dependencies are included. There is not a strong case for backports, but they can fix cornercases. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix NULL vs IS_ERR() check in probe() The iommu_paging_domain_alloc() function doesn't return NULL pointers, it returns error pointers. Update the check to match. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: rpcrdma: Always release the rpcrdma_device's xa_array Dai pointed out that the xa_init_flags() in rpcrdma_add_one() needs to have a matching xa_destroy() in rpcrdma_remove_one() to release underlying memory that the xarray might have accrued during operation. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table() If per_time_scales[i] or per_time_gains[i] kcalloc fails in the for loop of iio_gts_build_avail_scale_table(), the err_free_out will fail to call kfree() each time when i is reduced to 0, so all the per_time_scales[0] and per_time_gains[0] will not be freed, which will cause memory leaks. Fix it by checking if i >= 0. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: riscv: Prevent a bad reference count on CPU nodes When populating cache leaves we previously fetched the CPU device node at the very beginning. But when ACPI is enabled we go through a specific branch which returns early and does not call 'of_node_put' for the node that was acquired. Since we are not using a CPU device node for the ACPI code anyways, we can simply move the initialization of it just passed the ACPI block, and we are guaranteed to have an 'of_node_put' call for the acquired node. This prevents a bad reference count of the CPU device node. Moreover, the previous function did not check for errors when acquiring the device node, so a return -ENOENT has been added for that case. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't leak a link on AP removal Release the link mapping resource in AP removal. This impacted devices that do not support the MLD API (9260 and down). On those devices, we couldn't start the AP again after the AP has been already started and stopped. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Detect when STB is not available Loading the amd_pmc module as: amd_pmc enable_stb=1 ...can result in the following messages in the kernel ring buffer: amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340 Further debugging reveals that this occurs when the requests for S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0, indicating that the STB is inaccessible. To prevent the ioremap warning and provide clarity to the user, handle the invalid address and display an error message. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Be stricter about IO mapping flags The current panthor_device_mmap_io() implementation has two issues: 1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET, panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear VM_MAYWRITE. That means userspace can use mprotect() to make the mapping writable later on. This is a classic Linux driver gotcha. I don't think this actually has any impact in practice: When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and when the GPU is not powered, the dummy_latest_flush page provided by the driver is deliberately designed to not do any flushes, so the only thing writing to the dummy_latest_flush could achieve would be to make *more* flushes happen. 2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are mappings without the VM_SHARED flag). MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has copy-on-write semantics, which for VM_PFNMAP are semi-supported but fairly cursed. In particular, in such a mapping, the driver can only install PTEs during mmap() by calling remap_pfn_range() (because remap_pfn_range() wants to **store the physical address of the mapped physical memory into the vm_pgoff of the VMA**); installing PTEs later on with a fault handler (as panthor does) is not supported in private mappings, and so if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when it hits a BUG() check. Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for the FLUSH_ID don't make sense). Reproducers for both scenarios are in the notes of my patch on the mailing list; I tested that these bugs exist on a Rock 5B machine. Note that I only compile-tested the patch, I haven't tested it; I don't have a working kernel build setup for the test machine yet. Please test it before applying it. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: fix a NULL-pointer dereference Some SCM calls can be invoked with __scm being NULL (the driver may not have been and will not be probed as there's no SCM entry in device-tree). Make sure we don't dereference a NULL pointer. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier() The scmi_dev->name is released prematurely in __scmi_device_destroy(), which causes slab-use-after-free when accessing scmi_dev->name in scmi_bus_notifier(). So move the release of scmi_dev->name to scmi_device_release() to avoid slab-use-after-free. | BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec | Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1 | | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1 | Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT) | Call trace: | dump_backtrace+0x94/0x114 | show_stack+0x18/0x24 | dump_stack_lvl+0x48/0x60 | print_report+0xf4/0x5b0 | kasan_report+0xa4/0xec | __asan_report_load1_noabort+0x20/0x2c | strncmp+0xe4/0xec | scmi_bus_notifier+0x5c/0x54c | notifier_call_chain+0xb4/0x31c | blocking_notifier_call_chain+0x68/0x9c | bus_notify+0x54/0x78 | device_del+0x1bc/0x840 | device_unregister+0x20/0xb4 | __scmi_device_destroy+0xac/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Allocated by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_alloc_info+0x24/0x34 | __kasan_kmalloc+0xa0/0xb8 | __kmalloc_node_track_caller+0x6c/0x104 | kstrdup+0x48/0x84 | kstrdup_const+0x34/0x40 | __scmi_device_create.part.0+0x8c/0x408 | scmi_device_create+0x104/0x370 | scmi_chan_setup+0x2a0/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Freed by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_free_info+0x38/0x5c | __kasan_slab_free+0xe8/0x164 | __kmem_cache_free+0x11c/0x230 | kfree+0x70/0x130 | kfree_const+0x20/0x40 | __scmi_device_destroy+0x70/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | 7.8 |
High |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Start the RTC update work later The RTC update work involves runtime resuming the UFS controller. Hence, only start the RTC update work after runtime power management in the UFS driver has been fully initialized. This patch fixes the following kernel crash: Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) pm_runtime_get_if_active+0x24/0x9c (L) pm_runtime_get_if_active+0x24/0x9c ufshcd_rtc_work+0x138/0x1b4 process_one_work+0x148/0x288 worker_thread+0x2cc/0x3d4 kthread+0x110/0x114 ret_from_fork+0x10/0x20 | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfs: Fix KMSAN warning in decode_getfattr_attrs() Fix the following KMSAN warning: CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B Tainted: [B]=BAD_PAGE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) ===================================================== ===================================================== BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_generic+0x806/0xb00 nfs4_xdr_dec_getattr+0x1de/0x240 rpcauth_unwrap_resp_decode+0xab/0x100 rpcauth_unwrap_resp+0x95/0xc0 call_decode+0x4ff/0xb50 __rpc_execute+0x57b/0x19d0 rpc_execute+0x368/0x5e0 rpc_run_task+0xcfe/0xee0 nfs4_proc_getattr+0x5b5/0x990 __nfs_revalidate_inode+0x477/0xd00 nfs_access_get_cached+0x1021/0x1cc0 nfs_do_access+0x9f/0xae0 nfs_permission+0x1e4/0x8c0 inode_permission+0x356/0x6c0 link_path_walk+0x958/0x1330 path_lookupat+0xce/0x6b0 filename_lookup+0x23e/0x770 vfs_statx+0xe7/0x970 vfs_fstatat+0x1f2/0x2c0 __se_sys_newfstatat+0x67/0x880 __x64_sys_newfstatat+0xbd/0x120 x64_sys_call+0x1826/0x3cf0 do_syscall_64+0xd0/0x1b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The KMSAN warning is triggered in decode_getfattr_attrs(), when calling decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not initialized. Fix the issue by initializing fattr->mdsthreshold to NULL in nfs_fattr_init(). | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64. However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16. This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16], resulting in kmem_buckets_create() attempting to create a kmem_cache for size 16 twice. This duplication triggers warnings on boot: [ 2.325108] ------------[ cut here ]------------ [ 2.325135] kmem_cache of name 'memdup_user-16' already exists [ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.327957] Modules linked in: [ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328942] sp : ffff800083d6fc50 [ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598 [ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000 [ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030 [ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.329291] Call trace: [ 2.329407] __kmem_cache_create_args+0xb8/0x3b0 [ 2.329499] kmem_buckets_create+0xfc/0x320 [ 2.329526] init_user_buckets+0x34/0x78 [ 2.329540] do_one_initcall+0x64/0x3c8 [ 2.329550] kernel_init_freeable+0x26c/0x578 [ 2.329562] kernel_init+0x3c/0x258 [ 2.329574] ret_from_fork+0x10/0x20 [ 2.329698] ---[ end trace 0000000000000000 ]--- [ 2.403704] ------------[ cut here ]------------ [ 2.404716] kmem_cache of name 'msg_msg-16' already exists [ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.404842] Modules linked in: [ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.405026] Tainted: [W]=WARN [ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405111] sp : ffff800083d6fc50 [ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598 [ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000 [ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030 [ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.405287] Call trace: [ 2 ---truncated--- | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: prevent the risk of out of memory access The dvbdev contains a static variable used to store dvb minors. The behavior of it depends if CONFIG_DVB_DYNAMIC_MINORS is set or not. When not set, dvb_register_device() won't check for boundaries, as it will rely that a previous call to dvb_register_adapter() would already be enforcing it. On a similar way, dvb_device_open() uses the assumption that the register functions already did the needed checks. This can be fragile if some device ends using different calls. This also generate warnings on static check analysers like Coverity. So, add explicit guards to prevent potential risk of OOM issues. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: mgb4: protect driver against spectre Frequency range is set from sysfs via frequency_range_store(), being vulnerable to spectre, as reported by smatch: drivers/media/pci/mgb4/mgb4_cmt.c:231 mgb4_cmt_set_vin_freq_range() warn: potential spectre issue 'cmt_vals_in' [r] drivers/media/pci/mgb4/mgb4_cmt.c:238 mgb4_cmt_set_vin_freq_range() warn: possible spectre second half. 'reg_set' Fix it. | 7.1 |
High |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: s5p-jpeg: prevent buffer overflows The current logic allows word to be less than 2. If this happens, there will be buffer overflows, as reported by smatch. Add extra checks to prevent it. While here, remove an unused word = 0 assignment. | 7.8 |
High |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent NULL pointer dereference if ATIF is not supported acpi_evaluate_object() may return AE_NOT_FOUND (failure), which would result in dereferencing buffer.pointer (obj) while being NULL. Although this case may be unrealistic for the current code, it is still better to protect against possible bugs. Bail out also when status is AE_NOT_FOUND. This fixes 1 FORWARD_NULL issue reported by Coverity Report: CID 1600951: Null pointer dereferences (FORWARD_NULL) (cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1) | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd() 1. The size of the response packet is not validated. 2. The response buffer is not freed. Resolve these issues by switching to iwl_mvm_send_cmd_status(), which handles both size validation and frees the buffer. | 7.8 |
High |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data In case the non-paged data of a SKB carries protocol header and protocol payload to be transmitted on a certain platform that the DMA AXI address width is configured to 40-bit/48-bit, or the size of the non-paged data is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI address width is configured to 32-bit, then this SKB requires at least two DMA transmit descriptors to serve it. For example, three descriptors are allocated to split one DMA buffer mapped from one piece of non-paged data: dma_desc[N + 0], dma_desc[N + 1], dma_desc[N + 2]. Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold extra information to be reused in stmmac_tx_clean(): tx_q->tx_skbuff_dma[N + 0], tx_q->tx_skbuff_dma[N + 1], tx_q->tx_skbuff_dma[N + 2]. Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer address returned by DMA mapping call. stmmac_tx_clean() will try to unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf is a valid buffer address. The expected behavior that saves DMA buffer address of this non-paged data to tx_q->tx_skbuff_dma[entry].buf is: tx_q->tx_skbuff_dma[N + 0].buf = NULL; tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single(); Unfortunately, the current code misbehaves like this: tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single(); tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = NULL; On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address obviously, then the DMA buffer will be unmapped immediately. There may be a rare case that the DMA engine does not finish the pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go horribly wrong, DMA is going to access a unmapped/unreferenced memory region, corrupted data will be transmited or iommu fault will be triggered :( In contrast, the for-loop that maps SKB fragments behaves perfectly as expected, and that is how the driver should do for both non-paged data and paged frags actually. This patch corrects DMA map/unmap sequences by fixing the array index for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address. Tested and verified on DWXGMAC CORE 3.20a | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff: Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer. In 066a3b5b2346, the concern was to avoid iterating over the ingress qdisc since its parent is itself. The proper fix is to stop when parent TC_H_ROOT is reached because the only way to retrieve ingress is when a hierarchy which does not contain a ffff: major handle call into qdisc_lookup with TC_H_MAJ(TC_H_ROOT). In the scenario where major ffff: is an egress qdisc in any of the tree levels, the updates will also propagate to TC_H_ROOT, which then the iteration must stop. net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) | 7.8 |
High |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and it will result in a NULL pointer dereference. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix 6 GHz scan construction If more than 255 colocated APs exist for the set of all APs found during 2.4/5 GHz scanning, then the 6 GHz scan construction will loop forever since the loop variable has type u8, which can never reach the number found when that's bigger than 255, and is stored in a u32 variable. Also move it into the loops to have a smaller scope. Using a u32 there is fine, we limit the number of APs in the scan list and each has a limit on the number of RNR entries due to the frame size. With a limit of 1000 scan results, a frame size upper bound of 4096 (really it's more like ~2300) and a TBTT entry size of at least 11, we get an upper bound for the number of ~372k, well in the bounds of a u32. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix another deadlock during RTC update If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count is 0, we will enter the runtime suspend callback. However, the runtime suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock. Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the deadlock. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: fix missing NOWAIT check for O_DIRECT start write When io_uring starts a write, it'll call kiocb_start_write() to bump the super block rwsem, preventing any freezes from happening while that write is in-flight. The freeze side will grab that rwsem for writing, excluding any new writers from happening and waiting for existing writes to finish. But io_uring unconditionally uses kiocb_start_write(), which will block if someone is currently attempting to freeze the mount point. This causes a deadlock where freeze is waiting for previous writes to complete, but the previous writes cannot complete, as the task that is supposed to complete them is blocked waiting on starting a new write. This results in the following stuck trace showing that dependency with the write blocked starting a new write: task:fio state:D stack:0 pid:886 tgid:886 ppid:876 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_rwsem_wait+0x1e8/0x3f8 __percpu_down_read+0xe8/0x500 io_write+0xbb8/0xff8 io_issue_sqe+0x10c/0x1020 io_submit_sqes+0x614/0x2110 __arm64_sys_io_uring_enter+0x524/0x1038 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 INFO: task fsfreeze:7364 blocked for more than 15 seconds. Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963 with the attempting freezer stuck trying to grab the rwsem: task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_down_write+0x2b0/0x680 freeze_super+0x248/0x8a8 do_vfs_ioctl+0x149c/0x1b18 __arm64_sys_ioctl+0xd0/0x1a0 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a blocking grab of the super block rwsem if it isn't set. For normal issue where IOCB_NOWAIT would always be set, this returns -EAGAIN which will have io_uring core issue a blocking attempt of the write. That will in turn also get completions run, ensuring forward progress. Since freezing requires CAP_SYS_ADMIN in the first place, this isn't something that can be triggered by a regular user. | 4.4 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof 'modprobe slub_kunit' will have a warning as shown below. The root cause is that __kmalloc_cache_noprof was directly used, which resulted in no alloc_tag being allocated. This caused current->alloc_tag to be null, leading to a warning in alloc_tag_add_check. Let's add an alloc_hook layer to __kmalloc_cache_noprof specifically within lib/slub_kunit.c, which is the only user of this internal slub function outside kmalloc implementation itself. [58162.947016] WARNING: CPU: 2 PID: 6210 at ./include/linux/alloc_tag.h:125 alloc_tagging_slab_alloc_hook+0x268/0x27c [58162.957721] Call trace: [58162.957919] alloc_tagging_slab_alloc_hook+0x268/0x27c [58162.958286] __kmalloc_cache_noprof+0x14c/0x344 [58162.958615] test_kmalloc_redzone_access+0x50/0x10c [slub_kunit] [58162.959045] kunit_try_run_case+0x74/0x184 [kunit] [58162.959401] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit] [58162.959841] kthread+0x10c/0x118 [58162.960093] ret_from_fork+0x10/0x20 [58162.960363] ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ice: fix crash on probe for DPLL enabled E810 LOM
The E810 Lan On Motherboard (LOM) design is vendor specific. Intel
provides the reference design, but it is up to vendor on the final
product design. For some cases, like Linux DPLL support, the static
values defined in the driver does not reflect the actual LOM design.
Current implementation of dpll pins is causing the crash on probe
of the ice driver for such DPLL enabled E810 LOM designs:
WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330
...
Call Trace:
|
5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mptcp: init: protect sched with rcu_read_lock
Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT
creates this splat when an MPTCP socket is created:
=============================
WARNING: suspicious RCU usage
6.12.0-rc2+ #11 Not tainted
-----------------------------
net/mptcp/sched.c:44 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by mptcp_connect/176.
stack backtrace:
CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
|
5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64: dts: imx8ulp: correct the flexspi compatible string The flexspi on imx8ulp only has 16 LUTs, and imx8mm flexspi has 32 LUTs, so correct the compatible string here, otherwise will meet below error: [ 1.119072] ------------[ cut here ]------------ [ 1.123926] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-nxp-fspi.c:855 nxp_fspi_exec_op+0xb04/0xb64 [ 1.133239] Modules linked in: [ 1.136448] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc6-next-20240902-00001-g131bf9439dd9 #69 [ 1.146821] Hardware name: NXP i.MX8ULP EVK (DT) [ 1.151647] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.158931] pc : nxp_fspi_exec_op+0xb04/0xb64 [ 1.163496] lr : nxp_fspi_exec_op+0xa34/0xb64 [ 1.168060] sp : ffff80008002b2a0 [ 1.171526] x29: ffff80008002b2d0 x28: 0000000000000000 x27: 0000000000000000 [ 1.179002] x26: ffff2eb645542580 x25: ffff800080610014 x24: ffff800080610000 [ 1.186480] x23: ffff2eb645548080 x22: 0000000000000006 x21: ffff2eb6455425e0 [ 1.193956] x20: 0000000000000000 x19: ffff80008002b5e0 x18: ffffffffffffffff [ 1.201432] x17: ffff2eb644467508 x16: 0000000000000138 x15: 0000000000000002 [ 1.208907] x14: 0000000000000000 x13: ffff2eb6400d8080 x12: 00000000ffffff00 [ 1.216378] x11: 0000000000000000 x10: ffff2eb6400d8080 x9 : ffff2eb697adca80 [ 1.223850] x8 : ffff2eb697ad3cc0 x7 : 0000000100000000 x6 : 0000000000000001 [ 1.231324] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000007a6 [ 1.238795] x2 : 0000000000000000 x1 : 00000000000001ce x0 : 00000000ffffff92 [ 1.246267] Call trace: [ 1.248824] nxp_fspi_exec_op+0xb04/0xb64 [ 1.253031] spi_mem_exec_op+0x3a0/0x430 [ 1.257139] spi_nor_read_id+0x80/0xcc [ 1.261065] spi_nor_scan+0x1ec/0xf10 [ 1.264901] spi_nor_probe+0x108/0x2fc [ 1.268828] spi_mem_probe+0x6c/0xbc [ 1.272574] spi_probe+0x84/0xe4 [ 1.275958] really_probe+0xbc/0x29c [ 1.279713] __driver_probe_device+0x78/0x12c [ 1.284277] driver_probe_device+0xd8/0x15c [ 1.288660] __device_attach_driver+0xb8/0x134 [ 1.293316] bus_for_each_drv+0x88/0xe8 [ 1.297337] __device_attach+0xa0/0x190 [ 1.301353] device_initial_probe+0x14/0x20 [ 1.305734] bus_probe_device+0xac/0xb0 [ 1.309752] device_add+0x5d0/0x790 [ 1.313408] __spi_add_device+0x134/0x204 [ 1.317606] of_register_spi_device+0x3b4/0x590 [ 1.322348] spi_register_controller+0x47c/0x754 [ 1.327181] devm_spi_register_controller+0x4c/0xa4 [ 1.332289] nxp_fspi_probe+0x1cc/0x2b0 [ 1.336307] platform_probe+0x68/0xc4 [ 1.340145] really_probe+0xbc/0x29c [ 1.343893] __driver_probe_device+0x78/0x12c [ 1.348457] driver_probe_device+0xd8/0x15c [ 1.352838] __driver_attach+0x90/0x19c [ 1.356857] bus_for_each_dev+0x7c/0xdc [ 1.360877] driver_attach+0x24/0x30 [ 1.364624] bus_add_driver+0xe4/0x208 [ 1.368552] driver_register+0x5c/0x124 [ 1.372573] __platform_driver_register+0x28/0x34 [ 1.377497] nxp_fspi_driver_init+0x1c/0x28 [ 1.381888] do_one_initcall+0x80/0x1c8 [ 1.385908] kernel_init_freeable+0x1c4/0x28c [ 1.390472] kernel_init+0x20/0x1d8 [ 1.394138] ret_from_fork+0x10/0x20 [ 1.397885] ---[ end trace 0000000000000000 ]--- [ 1.407908] ------------[ cut here ]------------ | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: fix bounds checker error in dapm_widget_list_create The widgets array in the snd_soc_dapm_widget_list has a __counted_by attribute attached to it, which points to the num_widgets variable. This attribute is used in bounds checking, and if it is not set before the array is filled, then the bounds sanitizer will issue a warning or a kernel panic if CONFIG_UBSAN_TRAP is set. This patch sets the size of the widgets list calculated with list_for_each as the initial value for num_widgets as it is used for allocating memory for the array. It is updated with the actual number of added elements after the array is filled. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext() This command: $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: block dev insert failed: -EBUSY. fails because user space requests the same block index to be set for both ingress and egress. [ side note, I don't think it even failed prior to commit 913b47d3424e ("net/sched: Introduce tc block netdev tracking infra"), because this is a command from an old set of notes of mine which used to work, but alas, I did not scientifically bisect this ] The problem is not that it fails, but rather, that the second time around, it fails differently (and irrecoverably): $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: dsa_core: Flow block cb is busy. [ another note: the extack is added by me for illustration purposes. the context of the problem is that clsact_init() obtains the same &q->ingress_block pointer as &q->egress_block, and since we call tcf_block_get_ext() on both of them, "dev" will be added to the block->ports xarray twice, thus failing the operation: once through the ingress block pointer, and once again through the egress block pointer. the problem itself is that when xa_insert() fails, we have emitted a FLOW_BLOCK_BIND command through ndo_setup_tc(), but the offload never sees a corresponding FLOW_BLOCK_UNBIND. ] Even correcting the bad user input, we still cannot recover: $ tc qdisc replace dev swp3 ingress_block 1 egress_block 2 clsact Error: dsa_core: Flow block cb is busy. Basically the only way to recover is to reboot the system, or unbind and rebind the net device driver. To fix the bug, we need to fill the correct error teardown path which was missed during code movement, and call tcf_block_offload_unbind() when xa_insert() fails. [ last note, fundamentally I blame the label naming convention in tcf_block_get_ext() for the bug. The labels should be named after what they do, not after the error path that jumps to them. This way, it is obviously wrong that two labels pointing to the same code mean something is wrong, and checking the code correctness at the goto site is also easier ] | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mctp i2c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow()
There are code paths from which the function is called without holding
the RCU read lock, resulting in a suspicious RCU usage warning [1].
Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire
the RCU read lock before calling
l3mdev_master_upper_ifindex_by_index_rcu().
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
|
5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
|
5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
resource,kexec: walk_system_ram_res_rev must retain resource flags
walk_system_ram_res_rev() erroneously discards resource flags when passing
the information to the callback.
This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have
these resources selected during kexec to store kexec buffers if that
memory happens to be at placed above normal system ram.
This leads to undefined behavior after reboot. If the kexec buffer is
never touched, nothing happens. If the kexec buffer is touched, it could
lead to a crash (like below) or undefined behavior.
Tested on a system with CXL memory expanders with driver managed memory,
TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags
were being discarded and as a result the check for
IORESOURCE_SYSRAM_DRIVER_MANAGED passes.
find_next_iomem_res: name(System RAM (kmem))
start(10000000000)
end(1034fffffff)
flags(83000200)
locate_mem_hole_top_down: start(10000000000) end(1034fffffff) flags(0)
[.] BUG: unable to handle page fault for address: ffff89834ffff000
[.] #PF: supervisor read access in kernel mode
[.] #PF: error_code(0x0000) - not-present page
[.] PGD c04c8bf067 P4D c04c8bf067 PUD c04c8be067 PMD 0
[.] Oops: 0000 [#1] SMP
[.] RIP: 0010:ima_restore_measurement_list+0x95/0x4b0
[.] RSP: 0018:ffffc900000d3a80 EFLAGS: 00010286
[.] RAX: 0000000000001000 RBX: 0000000000000000 RCX: ffff89834ffff000
[.] RDX: 0000000000000018 RSI: ffff89834ffff000 RDI: ffff89834ffff018
[.] RBP: ffffc900000d3ba0 R08: 0000000000000020 R09: ffff888132b8a900
[.] R10: 4000000000000000 R11: 000000003a616d69 R12: 0000000000000000
[.] R13: ffffffff8404ac28 R14: 0000000000000000 R15: ffff89834ffff000
[.] FS: 0000000000000000(0000) GS:ffff893d44640000(0000) knlGS:0000000000000000
[.] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[.] ata5: SATA link down (SStatus 0 SControl 300)
[.] CR2: ffff89834ffff000 CR3: 000001034d00f001 CR4: 0000000000770ef0
[.] PKRU: 55555554
[.] Call Trace:
[.] |
5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: HID: core: zero-initialize the report buffer Since the report buffer is used by all kinds of drivers in various ways, let's zero-initialize it during allocation to make sure that it can't be ever used to leak kernel memory via specially-crafted report. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: security/keys: fix slab-out-of-bounds in key_task_permission KASAN reports an out of bounds read: BUG: KASAN: slab-out-of-bounds in __kuid_val include/linux/uidgid.h:36 BUG: KASAN: slab-out-of-bounds in uid_eq include/linux/uidgid.h:63 [inline] BUG: KASAN: slab-out-of-bounds in key_task_permission+0x394/0x410 security/keys/permission.c:54 Read of size 4 at addr ffff88813c3ab618 by task stress-ng/4362 CPU: 2 PID: 4362 Comm: stress-ng Not tainted 5.10.0-14930-gafbffd6c3ede #15 Call Trace: __dump_stack lib/dump_stack.c:82 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:123 print_address_description.constprop.0+0x19/0x170 mm/kasan/report.c:400 __kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560 kasan_report+0x3a/0x50 mm/kasan/report.c:585 __kuid_val include/linux/uidgid.h:36 [inline] uid_eq include/linux/uidgid.h:63 [inline] key_task_permission+0x394/0x410 security/keys/permission.c:54 search_nested_keyrings+0x90e/0xe90 security/keys/keyring.c:793 This issue was also reported by syzbot. It can be reproduced by following these steps(more details [1]): 1. Obtain more than 32 inputs that have similar hashes, which ends with the pattern '0xxxxxxxe6'. 2. Reboot and add the keys obtained in step 1. The reproducer demonstrates how this issue happened: 1. In the search_nested_keyrings function, when it iterates through the slots in a node(below tag ascend_to_node), if the slot pointer is meta and node->back_pointer != NULL(it means a root), it will proceed to descend_to_node. However, there is an exception. If node is the root, and one of the slots points to a shortcut, it will be treated as a keyring. 2. Whether the ptr is keyring decided by keyring_ptr_is_keyring function. However, KEYRING_PTR_SUBTYPE is 0x2UL, the same as ASSOC_ARRAY_PTR_SUBTYPE_MASK. 3. When 32 keys with the similar hashes are added to the tree, the ROOT has keys with hashes that are not similar (e.g. slot 0) and it splits NODE A without using a shortcut. When NODE A is filled with keys that all hashes are xxe6, the keys are similar, NODE A will split with a shortcut. Finally, it forms the tree as shown below, where slot 6 points to a shortcut. NODE A +------>+---+ ROOT | | 0 | xxe6 +---+ | +---+ xxxx | 0 | shortcut : : xxe6 +---+ | +---+ xxe6 : : | | | xxe6 +---+ | +---+ | 6 |---+ : : xxe6 +---+ +---+ xxe6 : : | f | xxe6 +---+ +---+ xxe6 | f | +---+ 4. As mentioned above, If a slot(slot 6) of the root points to a shortcut, it may be mistakenly transferred to a key*, leading to a read out-of-bounds read. To fix this issue, one should jump to descend_to_node if the ptr is a shortcut, regardless of whether the node is root or not. [1] https://lore.kernel.org/linux-kernel/[email protected]/ [jarkko: tweaked the commit message a bit to have an appropriate closes tag.] | 7.1 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: regulator: rtq2208: Fix uninitialized use of regulator_config Fix rtq2208 driver uninitialized use to cause kernel error. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sctp: properly validate chunk size in sctp_sf_ootb() A size validation fix similar to that in Commit 50619dbf8db7 ("sctp: add size validation when walking chunks") is also required in sctp_sf_ootb() to address a crash reported by syzbot: BUG: KMSAN: uninit-value in sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712 sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712 sctp_do_sm+0x181/0x93d0 net/sctp/sm_sideeffect.c:1166 sctp_endpoint_bh_rcv+0xc38/0xf90 net/sctp/endpointola.c:407 sctp_inq_push+0x2ef/0x380 net/sctp/inqueue.c:88 sctp_rcv+0x3831/0x3b20 net/sctp/input.c:243 sctp4_rcv+0x42/0x50 net/sctp/protocol.c:1159 ip_protocol_deliver_rcu+0xb51/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8 | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Enqueue Tx packets in dql before dmaengine starts
Enqueue packets in dql after dma engine starts causes race condition.
Tx transfer starts once dma engine is started and may execute dql dequeue
in completion before it gets queued. It results in following kernel crash
while running iperf stress test:
kernel BUG at lib/dynamic_queue_limits.c:99!
|
4.7 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when uninstalling driver When the driver is uninstalled and the VF is disabled concurrently, a kernel crash occurs. The reason is that the two actions call function pci_disable_sriov(). The num_VFs is checked to determine whether to release the corresponding resources. During the second calling, num_VFs is not 0 and the resource release function is called. However, the corresponding resource has been released during the first invoking. Therefore, the problem occurs: [15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [15278.131557][T50670] Call trace: [15278.134686][T50670] klist_put+0x28/0x12c [15278.138682][T50670] klist_del+0x14/0x20 [15278.142592][T50670] device_del+0xbc/0x3c0 [15278.146676][T50670] pci_remove_bus_device+0x84/0x120 [15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80 [15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c [15278.162485][T50670] sriov_disable+0x50/0x11c [15278.166829][T50670] pci_disable_sriov+0x24/0x30 [15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3] [15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge] [15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230 [15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30 [15278.193848][T50670] invoke_syscall+0x50/0x11c [15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164 [15278.203837][T50670] do_el0_svc+0x34/0xcc [15278.207834][T50670] el0_svc+0x20/0x30 For details, see the following figure. rmmod hclge disable VFs ---------------------------------------------------- hclge_exit() sriov_numvfs_store() ... device_lock() pci_disable_sriov() hns3_pci_sriov_configure() pci_disable_sriov() sriov_disable() sriov_disable() if !num_VFs : if !num_VFs : return; return; sriov_del_vfs() sriov_del_vfs() ... ... klist_put() klist_put() ... ... num_VFs = 0; num_VFs = 0; device_unlock(); In this patch, when driver is removing, we get the device_lock() to protect num_VFs, just like sriov_numvfs_store(). | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/smc: do not leave a dangling sk pointer in __smc_create()
Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when
it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC:
smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0
WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563
Modules linked in:
CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563
Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7
RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246
RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50
R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8
R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0
FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: stm32: spdifrx: fix dma channel release in stm32_spdifrx_remove In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not null. So the release of the dma channel leads to the following issue: [ 4.879000] st,stm32-spdifrx 500d0000.audio-controller: dma_request_slave_channel error -19 [ 4.888975] Unable to handle kernel NULL pointer dereference at virtual address 000000000000003d [...] [ 5.096577] Call trace: [ 5.099099] dma_release_channel+0x24/0x100 [ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx] [ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx] To avoid this issue, release channel only if the pointer is valid. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: add missing buffer index check dvb_vb2_expbuf() didn't check if the given buffer index was for a valid buffer. Add this check. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix buffer overwrite when using > 32 buffers The maximum number of buffers that can be requested was increased to 64 for the video capture queue. But video capture used a must_blank array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an out-of-bounds write when using buffer indices >= 32. Create a new define MAX_VID_CAP_BUFFERS that is used to access the must_blank array and set max_num_buffers for the video capture queue. This solves a crash reported by: https://bugzilla.kernel.org/show_bug.cgi?id=219258 | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: prevent the risk of a division by zero As reported by Coverity, the logic at tpg_precalculate_line() blindly rescales the buffer even when scaled_witdh is equal to zero. If this ever happens, this will cause a division by zero. Instead, add a WARN_ON_ONCE() to trigger such cases and return without doing any precalculation. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-use-after-free in ksmbd_smb2_session_create There is a race condition between ksmbd_smb2_session_create and ksmbd_expire_session. This patch add missing sessions_table_lock while adding/deleting session from global session table. | 7 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: check outstanding simultaneous SMB operations If Client send simultaneous SMB operations to ksmbd, It exhausts too much memory through the "ksmbd_work_cache”. It will cause OOM issue. ksmbd has a credit mechanism but it can't handle this problem. This patch add the check if it exceeds max credits to prevent this problem by assuming that one smb request consumes at least one credit. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix the missing xa_store error check xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed, so check error for xa_store() to fix it. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-use-after-free in smb3_preauth_hash_rsp ksmbd_user_session_put should be called under smb3_preauth_hash_rsp(). It will avoid freeing session before calling smb3_preauth_hash_rsp(). | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read() Avoid a possible buffer overflow if size is larger than 4K. (cherry picked from commit f5d873f5825b40d886d03bd2aede91d4cf002434) | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation When sealing or unsealing a key blob we currently do not wait for the AEAD cipher operation to finish and simply return after submitting the request. If there is some load on the system we can exit before the cipher operation is done and the buffer we read from/write to is already removed from the stack. This will e.g. result in NULL pointer dereference errors in the DCP driver during blob creation. Fix this by waiting for the AEAD cipher operation to finish before resuming the seal and unseal calls. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dm cache: fix out-of-bounds access to the dirty bitset when resizing dm-cache checks the dirty bits of the cache blocks to be dropped when shrinking the fast device, but an index bug in bitset iteration causes out-of-bounds access. Reproduce steps: 1. create a cache device of 1024 cache blocks (128 bytes dirty bitset) dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. shrink the fast device to 512 cache blocks, triggering out-of-bounds access to the dirty bitset (offset 0x80) dmsetup suspend cache dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0 Read of size 8 at addr ffffc900000f3080 by task dmsetup/131 (...snip...) The buggy address belongs to the virtual mapping at [ffffc900000f3000, ffffc900000f5000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by making the index post-incremented. | 7.1 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dm cache: fix potential out-of-bounds access on the first resume Out-of-bounds access occurs if the fast device is expanded unexpectedly before the first-time resume of the cache table. This happens because expanding the fast device requires reloading the cache table for cache_create to allocate new in-core data structures that fit the new size, and the check in cache_preresume is not performed during the first resume, leading to the issue. Reproduce steps: 1. prepare component devices: dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct 2. load a cache table of 512 cache blocks, and deliberately expand the fast device before resuming the cache, making the in-core data structures inadequate. dmsetup create cache --notable dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache 3. suspend the cache to write out the in-core dirty bitset and hint array, leading to out-of-bounds access to the dirty bitset at offset 0x40: dmsetup suspend cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80 Read of size 8 at addr ffffc90000085040 by task dmsetup/90 (...snip...) The buggy address belongs to the virtual mapping at [ffffc90000085000, ffffc90000087000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by checking the size change on the first resume. | 7.1 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dm: fix a crash if blk_alloc_disk fails If blk_alloc_disk fails, the variable md->disk is set to an error value. cleanup_mapped_device will see that md->disk is non-NULL and it will attempt to access it, causing a crash on this statement "md->disk->private_data = NULL;". | 4.7 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: vertexcom: mse102x: Fix possible double free of TX skb The scope of the TX skb is wider than just mse102x_tx_frame_spi(), so in case the TX skb room needs to be expanded, we should free the the temporary skb instead of the original skb. Otherwise the original TX skb pointer would be freed again in mse102x_tx_work(), which leads to crashes: Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23 Hardware name: chargebyte Charge SOM DC-ONE (DT) Workqueue: events mse102x_tx_work [mse102x] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_release_data+0xb8/0x1d8 lr : skb_release_data+0x1ac/0x1d8 sp : ffff8000819a3cc0 x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0 x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50 x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000 x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8 x8 : fffffc00001bc008 x7 : 0000000000000000 x6 : 0000000000000008 x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009 x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000 Call trace: skb_release_data+0xb8/0x1d8 kfree_skb_reason+0x48/0xb0 mse102x_tx_work+0x164/0x35c [mse102x] process_one_work+0x138/0x260 worker_thread+0x32c/0x438 kthread+0x118/0x11c ret_from_fork+0x10/0x20 Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660) | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64/sve: Discard stale CPU state when handling SVE traps The logic for handling SVE traps manipulates saved FPSIMD/SVE state incorrectly, and a race with preemption can result in a task having TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SVE traps enabled). This has been observed to result in warnings from do_sve_acc() where SVE traps are not expected while TIF_SVE is set: | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ Warnings of this form have been reported intermittently, e.g. https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/ https://lore.kernel.org/linux-arm-kernel/[email protected]/ The race can occur when the SVE trap handler is preempted before and after manipulating the saved FPSIMD/SVE state, starting and ending on the same CPU, e.g. | void do_sve_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ | | sve_init_regs() { | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | ... | } else { | fpsimd_to_sve(current); | current->thread.fp_type = FP_STATE_SVE; | } | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SVE traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. | 7 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: idpf: avoid vport access in idpf_get_link_ksettings When the device control plane is removed or the platform running device control plane is rebooted, a reset is detected on the driver. On driver reset, it releases the resources and waits for the reset to complete. If the reset fails, it takes the error path and releases the vport lock. At this time if the monitoring tools tries to access link settings, it call traces for accessing released vport pointer. To avoid it, move link_speed_mbps to netdev_priv structure which removes the dependency on vport pointer and the vport lock in idpf_get_link_ksettings. Also use netif_carrier_ok() to check the link status and adjust the offsetof to use link_up instead of link_speed_mbps. | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: reinitialize delayed ref list after deleting it from the list At insert_delayed_ref() if we need to update the action of an existing ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's ref_add_list using list_del(), which leaves the ref's add_list member not reinitialized, as list_del() sets the next and prev members of the list to LIST_POISON1 and LIST_POISON2, respectively. If later we end up calling drop_delayed_ref() against the ref, which can happen during merging or when destroying delayed refs due to a transaction abort, we can trigger a crash since at drop_delayed_ref() we call list_empty() against the ref's add_list, which returns false since the list was not reinitialized after the list_del() and as a consequence we call list_del() again at drop_delayed_ref(). This results in an invalid list access since the next and prev members are set to poison pointers, resulting in a splat if CONFIG_LIST_HARDENED and CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences otherwise. So fix this by deleting from the list with list_del_init() instead. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: filemap: Fix bounds checking in filemap_read() If the caller supplies an iocb->ki_pos value that is close to the filesystem upper limit, and an iterator with a count that causes us to overflow that limit, then filemap_read() enters an infinite loop. This behaviour was discovered when testing xfstests generic/525 with the "localio" optimisation for loopback NFS mounts. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: signal: restore the override_rlimit logic Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of signals. However now it's enforced unconditionally, even if override_rlimit is set. This behavior change caused production issues. For example, if the limit is reached and a process receives a SIGSEGV signal, sigqueue_alloc fails to allocate the necessary resources for the signal delivery, preventing the signal from being delivered with siginfo. This prevents the process from correctly identifying the fault address and handling the error. From the user-space perspective, applications are unaware that the limit has been reached and that the siginfo is effectively 'corrupted'. This can lead to unpredictable behavior and crashes, as we observed with java applications. Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip the comparison to max there if override_rlimit is set. This effectively restores the old behavior. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid overflow in damon_feed_loop_next_input() damon_feed_loop_next_input() is inefficient and fragile to overflows. Specifically, 'score_goal_diff_bp' calculation can overflow when 'score' is high. The calculation is actually unnecessary at all because 'goal' is a constant of value 10,000. Calculation of 'compensation' is again fragile to overflow. Final calculation of return value for under-achiving case is again fragile to overflow when the current score is under-achieving the target. Add two corner cases handling at the beginning of the function to make the body easier to read, and rewrite the body of the function to avoid overflows and the unnecessary bp value calcuation. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: musb: sunxi: Fix accessing an released usb phy Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") will cause that usb phy @glue->xceiv is accessed after released. 1) register platform driver @sunxi_musb_driver // get the usb phy @glue->xceiv sunxi_musb_probe() -> devm_usb_get_phy(). 2) register and unregister platform driver @musb_driver musb_probe() -> sunxi_musb_init() use the phy here //the phy is released here musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy() 3) register @musb_driver again musb_probe() -> sunxi_musb_init() use the phy here but the phy has been released at 2). ... Fixed by reverting the commit, namely, removing devm_usb_put_phy() from sunxi_musb_exit(). | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd() The "*cmd" variable can be controlled by the user via debugfs. That means "new_cam" can be as high as 255 while the size of the uc->updated[] array is UCSI_MAX_ALTMODES (30). The call tree is: ucsi_cmd() // val comes from simple_attr_write_xsigned() -> ucsi_send_command() -> ucsi_send_command_common() -> ucsi_run_command() // calls ucsi->ops->sync_control() -> ucsi_ccg_sync_control() | 7.1 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_edgeport: fix use after free in debug printk The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb) is a use after free of the "urb" pointer. Store the "dev" pointer at the start of the function to avoid this issue. | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs A recent change in the venus driver results in a stuck clock on the Lenovo ThinkPad X13s, for example, when streaming video in firefox: video_cc_mvs0_clk status stuck at 'off' WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c ... Call trace: clk_branch_wait+0x144/0x15c clk_branch2_enable+0x30/0x40 clk_core_enable+0xd8/0x29c clk_enable+0x2c/0x4c vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core] coreid_power_v4+0x464/0x628 [venus_core] vdec_start_streaming+0xc4/0x510 [venus_dec] vb2_start_streaming+0x6c/0x180 [videobuf2_common] vb2_core_streamon+0x120/0x1dc [videobuf2_common] vb2_streamon+0x1c/0x6c [videobuf2_v4l2] v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem] v4l_streamon+0x24/0x30 [videodev] using the out-of-tree sm8350/sc8280xp venus support. [1] Update also the sm8350/sc8280xp GDSC definitions so that the hw control mode can be changed at runtime as the venus driver now requires. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
Syzkaller is able to provoke null-ptr-dereference in ocfs2_xa_remove():
[ 57.319872] (a.out,1161,7):ocfs2_xa_remove:2028 ERROR: status = -12
[ 57.320420] (a.out,1161,7):ocfs2_xa_cleanup_value_truncate:1999 ERROR: Partial truncate while removing xattr overlay.upper. Leaking 1 clusters and removing the entry
[ 57.321727] BUG: kernel NULL pointer dereference, address: 0000000000000004
[...]
[ 57.325727] RIP: 0010:ocfs2_xa_block_wipe_namevalue+0x2a/0xc0
[...]
[ 57.331328] Call Trace:
[ 57.331477] |
5.5 |
Medium |
|
01h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans During loopback communication, a dangling pointer can be created in vsk->trans, potentially leading to a Use-After-Free condition. This issue is resolved by initializing vsk->trans to NULL. | 7.8 |
High |
|
13h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fork: only invoke khugepaged, ksm hooks if no error There is no reason to invoke these hooks early against an mm that is in an incomplete state. The change in commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") makes this more pertinent as we may be in a state where entries in the maple tree are not yet consistent. Their placement early in dup_mmap() only appears to have been meaningful for early error checking, and since functionally it'd require a very small allocation to fail (in practice 'too small to fail') that'd only occur in the most dire circumstances, meaning the fork would fail or be OOM'd in any case. Since both khugepaged and KSM tracking are there to provide optimisations to memory performance rather than critical functionality, it doesn't really matter all that much if, under such dire memory pressure, we fail to register an mm with these. As a result, we follow the example of commit d2081b2bf819 ("mm: khugepaged: make khugepaged_enter() void function") and make ksm_fork() a void function also. We only expose the mm to these functions once we are done with them and only if no error occurred in the fork operation. | 5.5 |
Medium |
|
10h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds write in trie_get_next_key() trie_get_next_key() allocates a node stack with size trie->max_prefixlen, while it writes (trie->max_prefixlen + 1) nodes to the stack when it has full paths from the root to leaves. For example, consider a trie with max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ... 0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with .prefixlen = 8 make 9 nodes be written on the node stack with size 8. | 7.8 |
High |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
macsec: Fix use-after-free while sending the offloading packet
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
|
7.8 |
High |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
The following race condition could trigger a NULL pointer dereference:
sock_map_link_detach(): sock_map_link_update_prog():
mutex_lock(&sockmap_mutex);
...
sockmap_link->map = NULL;
mutex_unlock(&sockmap_mutex);
mutex_lock(&sockmap_mutex);
...
sock_map_prog_link_lookup(sockmap_link->map);
mutex_unlock(&sockmap_mutex);
|
4.7 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netdevsim: Add trailing zero to terminate the string in nsim_nexthop_bucket_activity_write() This was found by a static analyzer. We should not forget the trailing zero after copy_from_user() if we will further do some string operations, sscanf() in this case. Adding a trailing zero will ensure that the function performs properly. | 5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: fix crash when config small gso_max_size/gso_ipv4_max_size Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow in sk_dst_gso_max_size(), which may trigger a BUG_ON crash, because sk->sk_gso_max_size would be much bigger than device limits. Call Trace: tcp_write_xmit tso_segs = tcp_init_tso_segs(skb, mss_now); tcp_set_skb_tso_segs tcp_skb_pcount_set // skb->len = 524288, mss_now = 8 // u16 tso_segs = 524288/8 = 65535 -> 0 tso_segs = DIV_ROUND_UP(skb->len, mss_now) BUG_ON(!tso_segs) Add check for the minimum value of gso_max_size and gso_ipv4_max_size. | 5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: Fix use-after-free in get_info()
ip6table_nat module unload has refcnt warning for UAF. call trace is:
WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80
Modules linked in: ip6table_nat(-)
CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:module_put+0x6f/0x80
Call Trace:
|
7.8 |
High |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
I got a syzbot report without a repro [1] crashing in nf_send_reset6()
I think the issue is that dev->hard_header_len is zero, and we attempt
later to push an Ethernet header.
Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c.
[1]
skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900045269b0 EFLAGS: 00010282
RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800
RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000
RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc
R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140
R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c
FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci7 hci_power_on
RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138
Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78
RSP: 0018:ffff888120bafac8 EFLAGS: 00010212
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040
RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4
RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054
R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000
FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the bits are dynamically allocated. However, the check is incorrect and may cause a kmemleak as shown below: unreferenced object 0xffff88812628c8c0 (size 32): comm "swapper/0", pid 1, jiffies 4294727320 hex dump (first 32 bytes): b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U........... f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 .............. backtrace (crc 781e32cc): [<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80 [<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0 [<00000000597124d6>] __alloc.isra.0+0x89/0xb0 [<000000004ebfffcd>] alloc_bulk+0x2af/0x720 [<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0 [<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610 [<000000008b616eac>] bpf_global_ma_init+0x19/0x30 [<00000000fc473efc>] do_one_initcall+0xd3/0x3c0 [<00000000ec81498c>] kernel_init_freeable+0x66a/0x940 [<00000000b119f72f>] kernel_init+0x20/0x160 [<00000000f11ac9a7>] ret_from_fork+0x3c/0x70 [<0000000004671da4>] ret_from_fork_asm+0x1a/0x30 That is because nr_bits will be set as zero in bpf_iter_bits_next() after all bits have been iterated. Fix the issue by setting kit->bit to kit->nr_bits instead of setting kit->nr_bits to zero when the iteration completes in bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to check whether the iteration is complete and still use "nr_bits > 64" to indicate whether bits are dynamically allocated. The "!nr_bits" check is necessary because bpf_iter_bits_new() may fail before setting kit->nr_bits, and this condition will stop the iteration early instead of accessing the zeroed or freed kit->bits. Considering the initial value of kit->bits is -1 and the type of kit->nr_bits is unsigned int, change the type of kit->nr_bits to int. The potential overflow problem will be handled in the following patch. | 5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Check the validity of nr_words in bpf_iter_bits_new() Check the validity of nr_words in bpf_iter_bits_new(). Without this check, when multiplication overflow occurs for nr_bits (e.g., when nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008). Fix it by limiting the maximum value of nr_words to 511. The value is derived from the current implementation of BPF memory allocator. To ensure compatibility if the BPF memory allocator's size limitation changes in the future, use the helper bpf_mem_alloc_check_size() to check whether nr_bytes is too larger. And return -E2BIG instead of -ENOMEM for oversized nr_bytes. | 5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
[2]
WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0
Modules linked in:
CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0
[...]
Call Trace:
|
5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed. | 6.2 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fsdax: dax_unshare_iter needs to copy entire blocks The code that copies data from srcmap to iomap in dax_unshare_iter is very very broken, which bfoster's recent fsx changes have exposed. If the pos and len passed to dax_file_unshare are not aligned to an fsblock boundary, the iter pos and length in the _iter function will reflect this unalignment. dax_iomap_direct_access always returns a pointer to the start of the kmapped fsdax page, even if its pos argument is in the middle of that page. This is catastrophic for data integrity when iter->pos is not aligned to a page, because daddr/saddr do not point to the same byte in the file as iter->pos. Hence we corrupt user data by copying it to the wrong place. If iter->pos + iomap_length() in the _iter function not aligned to a page, then we fail to copy a full block, and only partially populate the destination block. This is catastrophic for data confidentiality because we expose stale pmem contents. Fix both of these issues by aligning copy_pos/copy_len to a page boundary (remember, this is fsdax so 1 fsblock == 1 base page) so that we always copy full blocks. We're not done yet -- there's no call to invalidate_inode_pages2_range, so programs that have the file range mmap'd will continue accessing the old memory mapping after the file metadata updates have completed. Be careful with the return value -- if the unshare succeeds, we still need to return the number of bytes that the iomap iter thinks we're operating on. | 7.1 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Make rmw_lock a raw_spin_lock The following BUG was triggered: ============================= [ BUG: Invalid wait context ] 6.12.0-rc2-XXX #406 Not tainted ----------------------------- kworker/1:1/62 is trying to lock: ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370 other info that might help us debug this: context-{5:5} 2 locks held by kworker/1:1/62: #0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50 #1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280 stack backtrace: CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406 Workqueue: 0x0 (events) Call trace: dump_backtrace+0xa4/0x130 show_stack+0x20/0x38 dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x28 __lock_acquire+0x480/0x1ad8 lock_acquire+0x114/0x310 _raw_spin_lock+0x50/0x70 cpc_write+0xcc/0x370 cppc_set_perf+0xa0/0x3a8 cppc_cpufreq_fast_switch+0x40/0xc0 cpufreq_driver_fast_switch+0x4c/0x218 sugov_update_shared+0x234/0x280 update_load_avg+0x6ec/0x7b8 dequeue_entities+0x108/0x830 dequeue_task_fair+0x58/0x408 __schedule+0x4f0/0x1070 schedule+0x54/0x130 worker_thread+0xc0/0x2e8 kthread+0x130/0x148 ret_from_fork+0x10/0x20 sugov_update_shared() locks a raw_spinlock while cpc_write() locks a spinlock. To have a correct wait-type order, update rmw_lock to a raw spinlock and ensure that interrupts will be disabled on the CPU holding it. [ rjw: Changelog edits ] | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSD: Initialize struct nfsd4_copy earlier Ensure the refcount and async_copies fields are initialized early. cleanup_async_copy() will reference these fields if an error occurs in nfsd4_copy(). If they are not correctly initialized, at the very least, a refcount underflow occurs. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with this driver. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower Avoid potentially crashing in the driver because of uninitialized private data | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: Fix memory leak in management tx
In the current logic, memory is allocated for storing the MSDU context
during management packet TX but this memory is not being freed during
management TX completion. Similar leaks are seen in the management TX
cleanup logic.
Kmemleak reports this problem as below,
unreferenced object 0xffffff80b64ed250 (size 16):
comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s)
hex dump (first 16 bytes):
00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t......
backtrace:
[ |
5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: clear wdev->cqm_config pointer on free When we free wdev->cqm_config when unregistering, we also need to clear out the pointer since the same wdev/netdev may get re-registered in another network namespace, then destroyed later, running this code again, which results in a double-free. | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: Clear stale interrupts before resuming device iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 0 ---truncated--- | 7 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr() In the ad7124_write_raw() function, parameter val can potentially be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST() is called within ad7124_set_channel_odr(). The ad7124_write_raw() function is invoked through the sequence: iio_write_channel_raw() -> iio_write_channel_attribute() -> iio_channel_write(), with no checks in place to ensure val is non-zero. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table() modprobe iio-test-gts and rmmod it, then the following memory leak occurs: unreferenced object 0xffffff80c810be00 (size 64): comm "kunit_try_catch", pid 1654, jiffies 4294913981 hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 20 00 00 00 40 00 00 00 ........ ...@... 80 00 00 00 00 02 00 00 00 04 00 00 00 08 00 00 ................ backtrace (crc a63d875e): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000000315bc18>] 0xffffffdf052a6488 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cbfe9e70 (size 16): comm "kunit_try_catch", pid 1658, jiffies 4294914015 hex dump (first 16 bytes): 10 00 00 00 40 00 00 00 80 00 00 00 00 00 00 00 ....@........... backtrace (crc 857f0cb4): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000007d089d45>] 0xffffffdf052a6864 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 ...... It includes 5*5 times "size 64" memory leaks, which correspond to 5 times test_init_iio_gain_scale() calls with gts_test_gains size 10 (10*size(int)) and gts_test_itimes size 5. It also includes 5*1 times "size 16" memory leak, which correspond to one time __test_init_iio_gain_scale() call with gts_test_gains_gain_low size 3 (3*size(int)) and gts_test_itimes size 5. The reason is that the per_time_gains[i] is not freed which is allocated in the "gts->num_itime" for loop in iio_gts_build_avail_scale_table(). | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of checked flag Syzbot reported that in directory operations after nilfs2 detects filesystem corruption and degrades to read-only, __block_write_begin_int(), which is called to prepare block writes, may fail the BUG_ON check for accesses exceeding the folio/page size, triggering a kernel bug. This was found to be because the "checked" flag of a page/folio was not cleared when it was discarded by nilfs2's own routine, which causes the sanity check of directory entries to be skipped when the directory page/folio is reloaded. So, fix that. This was necessary when the use of nilfs2's own page discard routine was applied to more than just metadata files. | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential deadlock with newly created symlinks Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers memory reclamation involving the filesystem layer, which can result in circular lock dependencies among the reader/writer semaphore nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the fs_reclaim pseudo lock. This is because after commit 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem"), the gfp flags of the page cache for symbolic links are overwritten to GFP_KERNEL via inode_nohighmem(). This is not a problem for symlinks read from the backing device, because the __GFP_FS flag is dropped after inode_nohighmem() is called. However, when a new symlink is created with nilfs_symlink(), the gfp flags remain overwritten to GFP_KERNEL. Then, memory allocation called from page_symlink() etc. triggers memory reclamation including the FS layer, which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can cause a deadlock if they are called while nilfs->ns_segctor_sem is held: Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags of newly created symlinks in the same way that nilfs_new_inode() and __nilfs_read_inode() do, as a workaround until we adopt nofs allocation scope consistently or improve the locking constraints. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
KASAN reported following issue:
BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt]
Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387
Tainted: [U]=USER
Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
Call Trace:
|
7.1 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
|
7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix error propagation of split bios
The purpose of btrfs_bbio_propagate_error() shall be propagating an error
of split bio to its original btrfs_bio, and tell the error to the upper
layer. However, it's not working well on some cases.
* Case 1. Immediate (or quick) end_bio with an error
When btrfs sends btrfs_bio to mirrored devices, btrfs calls
btrfs_bio_end_io() when all the mirroring bios are completed. If that
btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function
is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error()
accesses the orig_bbio's bio context to increase the error count.
That works well in most cases. However, if the end_io is called enough
fast, orig_bbio's (remaining part after split) bio context may not be
properly set at that time. Since the bio context is set when the orig_bbio
(the last btrfs_bio) is sent to devices, that might be too late for earlier
split btrfs_bio's completion. That will result in NULL pointer
dereference.
That bug is easily reproducible by running btrfs/146 on zoned devices [1]
and it shows the following trace.
[1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: writeback wb_workfn (flush-btrfs-5)
RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs]
BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0
RSP: 0018:ffffc9000006f248 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080
RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58
R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158
FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334 | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sched/numa: Fix the potential null pointer dereference in task_numa_work() When running stress-ng-vm-segv test, we found a null pointer dereference error in task_numa_work(). Here is the backtrace: [323676.066985] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ...... [323676.067108] CPU: 35 PID: 2694524 Comm: stress-ng-vm-se ...... [323676.067113] pstate: 23401009 (nzCv daif +PAN -UAO +TCO +DIT +SSBS BTYPE=--) [323676.067115] pc : vma_migratable+0x1c/0xd0 [323676.067122] lr : task_numa_work+0x1ec/0x4e0 [323676.067127] sp : ffff8000ada73d20 [323676.067128] x29: ffff8000ada73d20 x28: 0000000000000000 x27: 000000003e89f010 [323676.067130] x26: 0000000000080000 x25: ffff800081b5c0d8 x24: ffff800081b27000 [323676.067133] x23: 0000000000010000 x22: 0000000104d18cc0 x21: ffff0009f7158000 [323676.067135] x20: 0000000000000000 x19: 0000000000000000 x18: ffff8000ada73db8 [323676.067138] x17: 0001400000000000 x16: ffff800080df40b0 x15: 0000000000000035 [323676.067140] x14: ffff8000ada73cc8 x13: 1fffe0017cc72001 x12: ffff8000ada73cc8 [323676.067142] x11: ffff80008001160c x10: ffff000be639000c x9 : ffff8000800f4ba4 [323676.067145] x8 : ffff000810375000 x7 : ffff8000ada73974 x6 : 0000000000000001 [323676.067147] x5 : 0068000b33e26707 x4 : 0000000000000001 x3 : ffff0009f7158000 [323676.067149] x2 : 0000000000000041 x1 : 0000000000004400 x0 : 0000000000000000 [323676.067152] Call trace: [323676.067153] vma_migratable+0x1c/0xd0 [323676.067155] task_numa_work+0x1ec/0x4e0 [323676.067157] task_work_run+0x78/0xd8 [323676.067161] do_notify_resume+0x1ec/0x290 [323676.067163] el0_svc+0x150/0x160 [323676.067167] el0t_64_sync_handler+0xf8/0x128 [323676.067170] el0t_64_sync+0x17c/0x180 [323676.067173] Code: d2888001 910003fd f9000bf3 aa0003f3 (f9401000) [323676.067177] SMP: stopping secondary CPUs [323676.070184] Starting crashdump kernel... stress-ng-vm-segv in stress-ng is used to stress test the SIGSEGV error handling function of the system, which tries to cause a SIGSEGV error on return from unmapping the whole address space of the child process. Normally this program will not cause kernel crashes. But before the munmap system call returns to user mode, a potential task_numa_work() for numa balancing could be added and executed. In this scenario, since the child process has no vma after munmap, the vma_next() in task_numa_work() will return a null pointer even if the vma iterator restarts from 0. Recheck the vma pointer before dereferencing it in task_numa_work(). | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem, on huge=always tmpfs, issues a warning and then hangs (interruptibly): WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9 CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2 ... copy_page_from_iter_atomic+0xa6/0x5ec generic_perform_write+0xf6/0x1b4 shmem_file_write_iter+0x54/0x67 Fix copy_page_from_iter_atomic() by limiting it in that case (include/linux/skbuff.h skb_frag_must_loop() does similar). But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too surprising, has outlived its usefulness, and should just be removed? | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Vangogh: Fix kernel memory out of bounds write
KASAN reports that the GPU metrics table allocated in
vangogh_tables_init() is not large enough for the memset done in
smu_cmn_init_soft_gpu_metrics(). Condensed report follows:
[ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu]
[ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067
...
[ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544
[ 33.861816] Tainted: [W]=WARN
[ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023
[ 33.861822] Call Trace:
[ 33.861826] |
7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids() Mounting btrfs from two images (which have the same one fsid and two different dev_uuids) in certain executing order may trigger an UAF for variable 'device->bdev_file' in __btrfs_free_extra_devids(). And following are the details: 1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs devices by ioctl(BTRFS_IOC_SCAN_DEV): / btrfs_device_1 → loop0 fs_device \ btrfs_device_2 → loop1 2. mount /dev/loop0 /mnt btrfs_open_devices btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0) btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree fail: btrfs_close_devices // -ENOMEM btrfs_close_bdev(btrfs_device_1) fput(btrfs_device_1->bdev_file) // btrfs_device_1->bdev_file is freed btrfs_close_bdev(btrfs_device_2) fput(btrfs_device_2->bdev_file) 3. mount /dev/loop1 /mnt btrfs_open_devices btrfs_get_bdev_and_sb(&bdev_file) // EIO, btrfs_device_1->bdev_file is not assigned, // which points to a freed memory area btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree btrfs_free_extra_devids if (btrfs_device_1->bdev_file) fput(btrfs_device_1->bdev_file) // UAF ! Fix it by setting 'device->bdev_file' as 'NULL' after closing the btrfs_device in btrfs_close_one_device(). | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: assign dh_key to NULL after kfree_sensitive ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup() for the same controller. So it's better to nullify it after release on error path in order to avoid double free later in nvmet_destroy_auth(). Found by Linux Verification Center (linuxtesting.org) with Svace. | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic() modprobe drm_connector_test and then rmmod drm_connector_test, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80cb0ee400 (size 128): comm "kunit_try_catch", pid 1948, jiffies 4294950339 hex dump (first 32 bytes): 14 44 02 00 80 07 d8 07 04 08 98 08 00 00 38 04 .D............8. 3c 04 41 04 65 04 00 00 05 00 00 00 00 00 00 00 <.A.e........... backtrace (crc 90e9585c): [<00000000ec42e3d7>] kmemleak_alloc+0x34/0x40 [<00000000d0ef055a>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000c2062161>] drm_mode_duplicate+0x44/0x19c [<00000000f96c74aa>] drm_display_mode_from_cea_vic+0x88/0x98 [<00000000d8f2c8b4>] 0xffffffdc982a4868 [<000000005d164dbc>] kunit_try_run_case+0x13c/0x3ac [<000000006fb23398>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000006ea56ca0>] kthread+0x2e8/0x374 [<000000000676063f>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic() modprobe drm_hdmi_state_helper_test and then rmmod it, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80ccd18100 (size 128): comm "kunit_try_catch", pid 1851, jiffies 4295059695 hex dump (first 32 bytes): 57 62 00 00 80 02 90 02 f0 02 20 03 00 00 e0 01 Wb........ ..... ea 01 ec 01 0d 02 00 00 0a 00 00 00 00 00 00 00 ................ backtrace (crc c2f1aa95): [<000000000f10b11b>] kmemleak_alloc+0x34/0x40 [<000000001cd4cf73>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000f1f3cffa>] drm_mode_duplicate+0x44/0x19c [<000000008cbeef13>] drm_display_mode_from_cea_vic+0x88/0x98 [<0000000019daaacf>] 0xffffffedc11ae69c [<000000000aad0f85>] kunit_try_run_case+0x13c/0x3ac [<00000000a9210bac>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000000a0b2e9e>] kthread+0x2e8/0x374 [<00000000bd668858>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. | 5.5 |
Medium |
|
10h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_rx_work syzbot reported the following uninit-value access issue [1] nci_rx_work() parses received packet from ndev->rx_q. It should be validated header size, payload size and total packet size before processing the packet. If an invalid packet is detected, it should be silently discarded. | 7.1 |
High |
|
23h00 +00:00 |
A flaw named "EntryBleed" was found in the Linux Kernel Page Table Isolation (KPTI). This issue could allow a local attacker to leak KASLR base via prefetch side-channels based on TLB timing for Intel systems. | 5.5 |
Medium |
|
11h10 +00:00 |
There exists an arbitrary memory read within the Linux Kernel BPF - Constants provided to fill pointers in structs passed in to bpf_sys_bpf are not verified and can point anywhere, including memory not owned by BPF. An attacker with CAP_BPF can arbitrarily read memory from anywhere on the system. We recommend upgrading past commit 86f44fcec22c | 6.7 |
Medium |
|
14h39 +00:00 |
A NULL pointer dereference vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in GPU component of Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS). | 6.3 |
Medium |
|
13h25 +00:00 |
A flaw was found in the Linux kernel. Measuring usage of the shared memory does not scale with large shared memory segment counts which could lead to resource exhaustion and DoS. | 5.5 |
Medium |
|
09h59 +00:00 |
A flaw double-free memory corruption in the Linux kernel HCI device initialization subsystem was found in the way user attach malicious HCI TTY Bluetooth device. A local user could use this flaw to crash the system. This flaw affects all the Linux kernel versions starting from 3.13. | 5.5 |
Medium |
|
10h18 +00:00 |
A flaw was found in the JFS filesystem code in the Linux Kernel which allows a local attacker with the ability to set extended attributes to panic the system, causing memory corruption or escalating privileges. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. | 7.8 |
High |
|
17h38 +00:00 |
A memory leak vulnerability was found in Linux kernel in llcp_sock_connect | 7.5 |
High |
|
21h33 +00:00 |
There is a vulnerability in the linux kernel versions higher than 5.2 (if kernel compiled with config params CONFIG_BPF_SYSCALL=y , CONFIG_BPF=y , CONFIG_CGROUPS=y , CONFIG_CGROUP_BPF=y , CONFIG_HARDENED_USERCOPY not set, and BPF hook to getsockopt is registered). As result of BPF execution, the local user can trigger bug in __cgroup_bpf_run_filter_getsockopt() function that can lead to heap overflow (because of non-hardened usercopy). The impact of attack could be deny of service or possibly privileges escalation. | 7.8 |
High |
|
18h50 +00:00 |
In a Linux KVM guest that has PV TLB enabled, a process in the guest kernel may be able to read memory locations from another process in the same guest. This problem is limit to the host running linux kernel 4.10 with a guest running linux kernel 4.16 or later. The problem mainly affects AMD processors but Intel CPUs cannot be ruled out. | 6.2 |
Medium |
|
22h00 +00:00 |
A flaw was found in the way KVM hypervisor handled x2APIC Machine Specific Rregister (MSR) access with nested(=1) virtualization enabled. In that, L1 guest could access L0's APIC register values via L2 guest, when 'virtualize x2APIC mode' is enabled. A guest could use this flaw to potentially crash the host kernel resulting in DoS issue. Kernel versions from 4.16 and newer are vulnerable to this issue. | 5.6 |
Medium |
|
17h00 +00:00 |
A flaw was found in the Linux kernel in the function hid_debug_events_read() in drivers/hid/hid-debug.c file which may enter an infinite loop with certain parameters passed from a userspace. A local privileged user ("root") can cause a system lock up and a denial of service. Versions from v4.18 and newer are vulnerable. | 4.4 |
Medium |
|
00h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to obtain root access by exploiting a symbolic link attack to read/write/corrupt a file that they originally did not have permission to access. IBM X-Force ID: 148804. | 8.4 |
High |
|
00h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local unprivileged user to overwrite files on the system which could cause damage to the database. IBM X-Force ID: 149429. | 6.2 |
Medium |
|
00h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 binaries load shared libraries from an untrusted path potentially giving low privilege user full access to the DB2 instance account by loading a malicious shared library. IBM X-Force ID: 149640. | 8.4 |
High |
|
16h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10,1, 10.5 and 11.1 could allow a local user to execute arbitrary code and conduct DLL hijacking attacks. IBM X-Force ID: 140209. | 7.8 |
High |
|
16h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5 and 11.1 binaries load shared libraries from an untrusted path potentially giving low privilege users full access to the DB2 instance account by loading a malicious shared library. IBM X-Force ID: 140972. | 8.4 |
High |
|
16h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to execute arbitrary code due to a format string error. IBM X-Force ID: 143023. | 8.4 |
High |
|
19h00 +00:00 |
The "pingsender" executable used by the Firefox Health Report dynamically loads a system copy of libcurl, which an attacker could replace. This allows for privilege escalation as the replaced libcurl code will run with Firefox's privileges. Note: This attack requires an attacker have local system access and only affects OS X and Linux. Windows systems are not affected. This vulnerability affects Firefox < 57. | 7.8 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability that could allow a local user to overwrite arbitrary files owned by the DB2 instance owner. IBM X-Force ID: 140044. | 5.5 |
Medium |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability that could allow a local user to overwrite arbitrary files owned by the DB2 instance owner. IBM X-Force ID: 140045. | 5.5 |
Medium |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability that could allow a local user to overwrite arbitrary files owned by the DB2 instance owner. IBM X-Force ID: 140046. | 5.5 |
Medium |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability that could allow a local user to overwrite arbitrary files owned by the DB2 instance owner. IBM X-Force ID: 140047. | 5.5 |
Medium |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to stack based buffer overflow, caused by improper bounds checking which could lead an attacker to execute arbitrary code. IBM X-Force ID: 140210. | 7.8 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 10.5 and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-Force ID: 140973. | 8.4 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 10.5 and 11.1, under specific or unusual conditions, could allow a local user to overflow a buffer which may result in a privilege escalation to the DB2 instance owner. IBM X-Force ID: 141624. | 7.4 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to overflow a buffer which may result in a privilege escalation to the DB2 instance owner. IBM X-Force ID: 142648. | 8.4 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to overflow a buffer which may result in a privilege escalation to the DB2 instance owner. IBM X-Force ID: 143022. | 8.4 |
High |
|
12h00 +00:00 |
IBM GSKit (IBM DB2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, and 11.1) duplicates the PRNG state across fork() system calls when multiple ICC instances are loaded which could result in duplicate Session IDs and a risk of duplicate key material. IBM X-Force ID: 139071. | 9.1 |
Critical |
|
12h00 +00:00 |
IBM GSKit (IBM DB2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, and 11.1) contains several environment variables that a local attacker could overflow and cause a denial of service. IBM X-Force ID: 139072. | 6.2 |
Medium |
|
21h00 +00:00 |
VMware Tools prior to 10.0.9 contains multiple file system races in libDeployPkg, related to the use of hard-coded paths under /tmp. Successful exploitation of this issue may result in a local privilege escalation. CVSS:3.0/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H | 6.7 |
Medium |
|
14h00 +00:00 |
A potential Buffer Overflow Vulnerability (from a BB Code handling issue) has been identified in TeamSpeak Server version 3.0.13.6 (08/11/2016 09:48:33), it enables the users to Crash any WINDOWS Client that clicked into a Vulnerable Channel of a TeamSpeak Server. | 7.5 |
High |
|
22h00 +00:00 |
The OS Installation Management component in CA Client Automation r12.9, r14.0, and r14.0 SP1 places an encrypted password into a readable local file during operating system installation, which allows local users to obtain sensitive information by reading this file after operating system installation. | 5.5 |
Medium |
|
21h00 +00:00 |
IBM Tivoli Storage Manager discloses unencrypted login credentials to Vmware vCenter that could be obtained by a local user. | 6.5 |
Medium |
|
21h00 +00:00 |
IBM BigFix Inventory v9 stores potentially sensitive information in log files that could be read by a local user. | 5.5 |
Medium |
|
21h00 +00:00 |
IBM BigFix Inventory v9 could disclose sensitive information to an unauthorized user using HTTP GET requests. This information could be used to mount further attacks against the system. | 5.3 |
Medium |
|
20h00 +00:00 |
IBM BigFix Inventory v9 9.2 stores user credentials in plain in clear text which can be read by a local user. | 5.5 |
Medium |
|
19h00 +00:00 |
IBM BigFix Inventory v9 could allow a remote attacker to conduct phishing attacks, using an open redirect attack. By persuading a victim to visit a specially-crafted Web site, a remote attacker could exploit this vulnerability to spoof the URL displayed to redirect a user to a malicious Web site that would appear to be trusted. This could allow the attacker to obtain highly sensitive information or conduct further attacks against the victim. | 6.1 |
Medium |
|
19h00 +00:00 |
IBM BigFix Inventory v9 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. | 5.9 |
Medium |
|
19h00 +00:00 |
IBM BigFix Inventory v9 is vulnerable to a denial of service, caused by an XML External Entity Injection (XXE) error when processing XML data. A remote attacker could exploit this vulnerability to expose highly sensitive information or consume all available memory resources. | 8.1 |
High |
|
19h00 +00:00 |
IBM BigFix Inventory v9 allows web pages to be stored locally which can be read by another user on the system. | 5.5 |
Medium |
|
21h01 +00:00 |
The casrvc program in CA Common Services, as used in CA Client Automation 12.8, 12.9, and 14.0; CA SystemEDGE 5.8.2 and 5.9; CA Systems Performance for Infrastructure Managers 12.8 and 12.9; CA Universal Job Management Agent 11.2; CA Virtual Assurance for Infrastructure Managers 12.8 and 12.9; CA Workload Automation AE 11, 11.3, 11.3.5, and 11.3.6 on AIX, HP-UX, Linux, and Solaris allows local users to modify arbitrary files and consequently gain root privileges via vectors related to insufficient validation. | 7.8 |
High |
|
21h00 +00:00 |
RESTful web services in CA Service Desk Manager 12.9 and CA Service Desk Management 14.1 might allow remote authenticated users to read or modify task information by leveraging incorrect permissions applied to a RESTful request. | 8.1 |
High |
|
19h37 +00:00 |
For the NVIDIA Quadro, NVS, GeForce, and Tesla products, NVIDIA GPU Display Driver on Linux R304 before 304.132, R340 before 340.98, R367 before 367.55, R361_93 before 361.93.03, and R370 before 370.28 contains a vulnerability in the kernel mode layer (nvidia.ko) handler for mmap() where improper input validation may allow users to gain access to arbitrary physical memory, leading to an escalation of privileges. | 7.8 |
High |
|
23h00 +00:00 |
Untrusted search path vulnerability in IBM DB2 9.7 through FP11, 10.1 through FP5, 10.5 before FP8, and 11.1 GA on Linux, AIX, and HP-UX allows local users to gain privileges via a Trojan horse library that is accessed by a setuid or setgid program. | 7.3 |
High |
|
23h00 +00:00 |
Mozilla Firefox before 48.0 and Firefox ESR 45.x before 45.3 on Linux make cairo _cairo_surface_get_extents calls that do not properly interact with libav header allocation in FFmpeg 0.10, which allows remote attackers to cause a denial of service (application crash) via a crafted video. | 6.5 |
Medium |
|
14h00 +00:00 |
Unspecified vulnerability in Adobe Flash Player 21.0.0.242 and earlier allows remote attackers to execute arbitrary code via unknown vectors, as exploited in the wild in June 2016. | 9.8 |
Critical |
|
09h00 +00:00 |
Cross-site scripting (XSS) vulnerability in VMware vRealize Automation 6.x before 6.2.4 on Linux allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. | 5.4 |
Medium |
|
09h00 +00:00 |
Cross-site scripting (XSS) vulnerability in VMware vRealize Business Advanced and Enterprise 8.x before 8.2.5 on Linux allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. | 5.4 |
Medium |
|
17h00 +00:00 |
Mozilla Firefox before 45.0 on Linux, when an Intel video driver is used, allows remote attackers to cause a denial of service (memory consumption or stack memory corruption) by triggering use of a WebGL shader. | 6.5 |
Medium |
|
19h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Experience Manager (AEM) 6.1.0 allows remote authenticated users to inject arbitrary web script or HTML via a folder title field that is mishandled in the Deletion popup dialog. | 6.1 |
Medium |
|
19h00 +00:00 |
The Servlets Post component 2.3.6 in Apache Sling, as used in Adobe Experience Manager 5.6.1, 6.0.0, and 6.1.0, allows remote attackers to obtain sensitive information via unspecified vectors. | 7.5 |
High |
|
19h00 +00:00 |
Adobe Experience Manager 5.6.1, 6.0.0, and 6.1.0 might allow remote attackers to have an unspecified impact via a crafted serialized Java object. | 7.5 |
High |
|
23h00 +00:00 |
Integer overflow in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors. | 8.8 |
High |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8460, CVE-2015-8636, and CVE-2015-8645. | 10 |
Critical |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8459, CVE-2015-8636, and CVE-2015-8645. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8459, CVE-2015-8460, and CVE-2015-8645. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion." | 8.8 |
High |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8459, CVE-2015-8460, and CVE-2015-8636. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, and CVE-2015-8649. | 8.8 |
High |
|
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in the TextField object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted autoSize property value, a different vulnerability than CVE-2015-8048, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the MovieClip object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted beginGradientFill call, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8457. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2015-8440 and CVE-2015-8453. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in the PrintJob object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via crafted addPage arguments, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the Selection object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted setFocus call, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted XML object that is mishandled during a toString call, a different vulnerability than CVE-2015-8446. | 9.3 |
||
01h00 +00:00 |
The SharedObject object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code by leveraging an unspecified "type confusion" during a getRemote call, a different vulnerability than CVE-2015-8456. | 9.3 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2015-8409 and CVE-2015-8453. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in the MovieClip object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted filters property value, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Integer overflow in the Shader filter implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a large BitmapData source object. | 9.3 |
||
01h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via an MP3 file with COMM tags that are mishandled during memory allocation, a different vulnerability than CVE-2015-8438. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the Color object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via crafted setTransform arguments, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the DisplacementMapFilter object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted mapBitmap property value, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the MovieClip object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted lineTo method call, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted filters property value in a TextField object, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to bypass the ASLR protection mechanism via JIT data, a different vulnerability than CVE-2015-8409 and CVE-2015-8440. | 4.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, and CVE-2015-8452. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, and CVE-2015-8451. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2015-8439. | 9.3 |
||
01h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8407. | 10 |
||
19h00 +00:00 |
Multiple integer overflows in the kernel mode driver for the NVIDIA GPU graphics driver R340 before 341.92, R352 before 354.35, and R358 before 358.87 on Windows and R304 before 304.131, R340 before 340.96, R352 before 352.63, and R358 before 358.16 on Linux allow local users to obtain sensitive information, cause a denial of service (crash), or possibly gain privileges via unknown vectors, which trigger uninitialized or out of bounds memory access. NOTE: this identifier has been SPLIT per ADT2 and ADT3 due to different vulnerability type and affected versions. See CVE-2015-8328 for the vulnerability in the NVAPI support layer in NVIDIA drivers for Windows. | 6.6 |
||
23h00 +00:00 |
Cisco AnyConnect Secure Mobility Client 4.1(8) on OS X and Linux does not verify pathnames before installation actions, which allows local users to obtain root privileges via a crafted installation file, aka Bug ID CSCuv11947. | 7.2 |
||
23h00 +00:00 |
gfx/2d/DataSurfaceHelpers.cpp in Mozilla Firefox before 41.0 on Linux improperly attempts to use the Cairo library with 32-bit color-depth surface creation followed by 16-bit color-depth surface display, which allows remote attackers to obtain sensitive information from process memory or cause a denial of service (out-of-bounds read) by using a CANVAS element to trigger 2D rendering. | 6.4 |
||
08h00 +00:00 |
Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 do not properly restrict the SWF file format, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks against JSONP endpoints, and obtain sensitive information, via a crafted OBJECT element with SWF content satisfying the character-set requirements of a callback API. NOTE: this issue exists because of an incomplete fix for CVE-2014-4671 and CVE-2014-5333. | 4.3 |
||
08h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-5570, CVE-2015-5581, CVE-2015-5584, and CVE-2015-6682. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors. | 5 |
||
08h00 +00:00 |
Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 allow attackers to execute arbitrary code or cause a denial of service (stack memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-5567. | 10 |
||
08h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 allow attackers to bypass the Same Origin Policy and obtain sensitive information via unspecified vectors. | 5 |
||
23h00 +00:00 |
Integer overflow in the make_filter_table function in pixops/pixops.c in gdk-pixbuf before 2.31.5, as used in Mozilla Firefox before 40.0 and Firefox ESR 38.x before 38.2 on Linux, Google Chrome on Linux, and other products, allows remote attackers to execute arbitrary code or cause a denial of service (heap-based buffer overflow and application crash) via crafted bitmap dimensions that are mishandled during scaling. | 6.8 |
||
08h00 +00:00 |
IBM InfoSphere DataStage 8.1, 8.5, 8.7, 9.1, and 11.3 through 11.3.1.2 on UNIX allows local users to write to executable files, and consequently obtain root privileges, via unspecified vectors. | 7.2 |
||
08h00 +00:00 |
CA Common Services, as used in CA Client Automation r12.5 SP01, r12.8, and r12.9; CA Network and Systems Management r11.0, r11.1, and r11.2; CA NSM Job Management Option r11.0, r11.1, and r11.2; CA Universal Job Management Agent; CA Virtual Assurance for Infrastructure Managers (aka SystemEDGE) 12.6, 12.7, 12.8, and 12.9; and CA Workload Automation AE r11, r11.3, r11.3.5, and r11.3.6 on UNIX, allows local users to gain privileges via an unspecified environment variable. | 4.6 |
||
08h00 +00:00 |
CA Common Services, as used in CA Client Automation r12.5 SP01, r12.8, and r12.9; CA Network and Systems Management r11.0, r11.1, and r11.2; CA NSM Job Management Option r11.0, r11.1, and r11.2; CA Universal Job Management Agent; CA Virtual Assurance for Infrastructure Managers (aka SystemEDGE) 12.6, 12.7, 12.8, and 12.9; and CA Workload Automation AE r11, r11.3, r11.3.5, and r11.3.6 on UNIX, does not properly perform bounds checking, which allows local users to gain privileges via unspecified vectors. | 4.6 |
||
08h00 +00:00 |
CA Common Services, as used in CA Client Automation r12.5 SP01, r12.8, and r12.9; CA Network and Systems Management r11.0, r11.1, and r11.2; CA NSM Job Management Option r11.0, r11.1, and r11.2; CA Universal Job Management Agent; CA Virtual Assurance for Infrastructure Managers (aka SystemEDGE) 12.6, 12.7, 12.8, and 12.9; and CA Workload Automation AE r11, r11.3, r11.3.5, and r11.3.6 on UNIX, does not properly validate an unspecified variable, which allows local users to gain privileges via unknown vectors. | 4.6 |
||
19h00 +00:00 |
Google Chrome before 41.0.2272.118 does not properly handle the interaction of IPC, the Gamepad API, and Google V8, which allows remote attackers to execute arbitrary code via unspecified vectors. | 7.5 |
||
19h00 +00:00 |
Race condition in gpu/command_buffer/service/gles2_cmd_decoder.cc in Google Chrome before 41.0.2272.118 allows remote attackers to cause a denial of service (buffer overflow) or possibly have unspecified other impact by manipulating OpenGL ES commands. | 6.8 |
||
08h00 +00:00 |
Use-after-free vulnerability in the AppendElements function in Mozilla Firefox before 37.0, Firefox ESR 31.x before 31.6, and Thunderbird before 31.6 on Linux, when the Fluendo MP3 plugin for GStreamer is used, allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted MP3 file. | 5.1 |
||
01h00 +00:00 |
Symantec NetBackup OpsCenter 7.6.0.2 through 7.6.1 on Linux and UNIX allows remote attackers to execute arbitrary JavaScript code via unspecified vectors. | 7.5 |
||
01h00 +00:00 |
Race condition in the client in IBM Tivoli Storage Manager (TSM) 5.4.0.0 through 5.4.3.6, 5.5.0.0 through 5.5.4.3, 6.1.0.0 through 6.1.5.6, 6.2 before 6.2.5.4, 6.3 before 6.3.2.3, 6.4 before 6.4.2.1, and 7.1 before 7.1.1 on UNIX and Linux allows local users to obtain root privileges via unspecified vectors. | 6.9 |
||
01h00 +00:00 |
Directory traversal vulnerability in IBM Optim Performance Manager for DB2 4.1.0.1 through 4.1.1 on Linux, UNIX, and Windows and IBM InfoSphere Optim Performance Manager for DB2 5.1 through 5.3.1 on Linux, UNIX, and Windows allows remote attackers to access arbitrary files via a .. (dot dot) in a URL. | 7.8 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 do not properly validate files, which has unspecified impact and attack vectors. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow attackers to obtain sensitive keystroke information via unspecified vectors. | 5 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-0306. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-0309. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion." | 9.3 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-0303. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow remote attackers to obtain sensitive information from process memory or cause a denial of service (out-of-bounds read) via unspecified vectors. | 8.5 |
||
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-0304. | 10 |
||
21h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 13.0.0.259 and 14.x and 15.x before 15.0.0.246 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in December 2014. | 9.8 |
Critical |
|
20h00 +00:00 |
Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows remote attackers to bypass the Same Origin Policy via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-9164. | 10 |
||
20h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to obtain sensitive information via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0587. | 10 |
||
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0588 and CVE-2014-8438. | 10 |
||
22h00 +00:00 |
Double free vulnerability in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0581, CVE-2014-8440, and CVE-2014-8441. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0584, CVE-2014-0585, CVE-2014-0586, and CVE-2014-0590. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0576, CVE-2014-8440, and CVE-2014-8441. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0589. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to complete a transition from Low Integrity to Medium Integrity via unspecified vectors. | 7.5 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0577, CVE-2014-0585, CVE-2014-0586, and CVE-2014-0590. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0577, CVE-2014-0584, CVE-2014-0586, and CVE-2014-0590. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0577, CVE-2014-0584, CVE-2014-0585, and CVE-2014-0590. | 10 |
||
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0573 and CVE-2014-8438. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0582. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0577, CVE-2014-0584, CVE-2014-0585, and CVE-2014-0586. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow remote attackers to discover session tokens via unspecified vectors. | 5 |
||
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0573 and CVE-2014-0588. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0576, CVE-2014-0581, and CVE-2014-8441. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0576, CVE-2014-0581, and CVE-2014-8440. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to complete a transition from Low Integrity to Medium Integrity by leveraging incorrect permissions. | 7.5 |
||
21h00 +00:00 |
The apt-get download command in APT before 1.0.9 does not properly validate signatures for packages, which allows remote attackers to execute arbitrary code via a crafted package. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.250 and 14.x and 15.x before 15.0.0.189 on Windows and OS X and before 11.2.202.411 on Linux, Adobe AIR before 15.0.0.293, Adobe AIR SDK before 15.0.0.302, and Adobe AIR SDK & Compiler before 15.0.0.302 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0564. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to bypass intended access restrictions via unspecified vectors. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0549, CVE-2014-0550, CVE-2014-0551, CVE-2014-0552, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow remote attackers to bypass the Same Origin Policy via unspecified vectors. | 7.5 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0550, CVE-2014-0551, CVE-2014-0552, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0549, CVE-2014-0551, CVE-2014-0552, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0549, CVE-2014-0550, CVE-2014-0552, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0549, CVE-2014-0550, CVE-2014-0551, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0549, CVE-2014-0550, CVE-2014-0551, and CVE-2014-0552. | 10 |
||
23h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0559. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors. | 10 |
||
23h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0556. | 10 |
||
08h00 +00:00 |
Stack-based buffer overflow in IBM DB2 9.7 through FP9a, 9.8 through FP5, 10.1 through FP4, and 10.5 before FP4 on Linux, UNIX, and Windows allows remote authenticated users to execute arbitrary code via a crafted ALTER MODULE statement. | 8.5 |
||
08h00 +00:00 |
The SQL engine in IBM DB2 9.5 through FP10, 9.7 through FP9a, 9.8 through FP5, 10.1 through FP4, and 10.5 before FP4 on Linux, UNIX, and Windows allows remote authenticated users to cause a denial of service (daemon crash) via a crafted UNION clause in a subquery of a SELECT statement. | 3.5 |
||
08h00 +00:00 |
IBM DB2 10.5 before FP4 on Linux and AIX creates temporary files during CDE table LOAD operations, which allows local users to obtain sensitive information by reading a file while a LOAD is occurring. | 2.1 |
||
08h00 +00:00 |
Monitoring Agent for UNIX Logs 6.2.0 through FP03, 6.2.1 through FP04, 6.2.2 through FP09, and 6.2.3 through FP04 and Monitoring Server (ms) and Shared Libraries (ax) 6.2.0 through FP03, 6.2.1 through FP04, 6.2.2 through FP08, 6.2.3 through FP01, and 6.3.0 through FP01 in IBM Tivoli Monitoring (ITM) on UNIX allow local users to gain privileges via unspecified vectors. | 7.2 |
||
08h00 +00:00 |
The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file. | 5.5 |
Medium |
|
08h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict the SWF file format, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks against JSONP endpoints, and obtain sensitive information, via a crafted OBJECT element with SWF content satisfying the character-set requirements of a callback API, in conjunction with a manipulation involving a '$' (dollar sign) or '(' (open parenthesis) character. NOTE: this issue exists because of an incomplete fix for CVE-2014-4671. | 4.3 |
||
20h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0542, CVE-2014-0543, CVE-2014-0544, and CVE-2014-0545. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 allow attackers to bypass intended access restrictions via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0540, CVE-2014-0543, CVE-2014-0544, and CVE-2014-0545. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0540, CVE-2014-0542, CVE-2014-0544, and CVE-2014-0545. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0540, CVE-2014-0542, CVE-2014-0543, and CVE-2014-0545. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0540, CVE-2014-0542, CVE-2014-0543, and CVE-2014-0544. | 10 |
||
17h00 +00:00 |
dbus 1.3.0 before 1.6.22 and 1.8.x before 1.8.6, when running on Linux 2.6.37-rc4 or later, allows local users to cause a denial of service (system-bus disconnect of other services or applications) by sending a message containing a file descriptor, then exceeding the maximum recursion depth before the initial message is forwarded. | 2.1 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.231 and 14.x before 14.0.0.145 on Windows and OS X and before 11.2.202.394 on Linux, Adobe AIR before 14.0.0.137 on Android, Adobe AIR SDK before 14.0.0.137, and Adobe AIR SDK & Compiler before 14.0.0.137 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0539. | 7.5 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.231 and 14.x before 14.0.0.145 on Windows and OS X and before 11.2.202.394 on Linux, Adobe AIR before 14.0.0.137 on Android, Adobe AIR SDK before 14.0.0.137, and Adobe AIR SDK & Compiler before 14.0.0.137 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0537. | 7.5 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.231 and 14.x before 14.0.0.145 on Windows and OS X and before 11.2.202.394 on Linux, Adobe AIR before 14.0.0.137 on Android, Adobe AIR SDK before 14.0.0.137, and Adobe AIR SDK & Compiler before 14.0.0.137 do not properly restrict the SWF file format, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks against JSONP endpoints, and obtain sensitive information, via a crafted OBJECT element with SWF content satisfying the character-set requirements of a callback API. | 4.3 |
||
13h00 +00:00 |
Unspecified vulnerability in HP Release Control 9.x before 9.13 p3 and 9.2x before RC 9.21.0003 p1 on Windows and 9.2x before RC 9.21.0002 p1 on Linux allows remote authenticated users to obtain sensitive information via unknown vectors. | 4 |
||
13h00 +00:00 |
Unspecified vulnerability in HP Release Control 9.x before 9.13 p3 and 9.2x before RC 9.21.0003 p1 on Windows and 9.2x before RC 9.21.0002 p1 on Linux allows remote authenticated users to gain privileges via unknown vectors. | 9 |
||
08h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2014-0532 and CVE-2014-0533. | 4.3 |
||
08h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2014-0531 and CVE-2014-0533. | 4.3 |
||
08h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2014-0531 and CVE-2014-0532. | 4.3 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0535. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0534. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow remote attackers to bypass the Same Origin Policy via unspecified vectors. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0518, CVE-2014-0519, and CVE-2014-0520. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0517, CVE-2014-0519, and CVE-2014-0520. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0517, CVE-2014-0518, and CVE-2014-0520. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0517, CVE-2014-0518, and CVE-2014-0519. | 7.5 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 11.7.700.279 and 11.8.x through 13.0.x before 13.0.0.206 on Windows and OS X, and before 11.2.202.356 on Linux, allows remote attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in April 2014. | 10 |
||
17h00 +00:00 |
IBM Notes and Domino 8.5.x before 8.5.3 FP6 IF3 and 9.x before 9.0.1 FP1 on 32-bit Linux platforms use incorrect gcc options, which makes it easier for remote attackers to execute arbitrary code by leveraging the absence of the NX protection mechanism and placing crafted x86 code on the stack, aka SPR KLYH9GGS9W. | 5 |
||
19h00 +00:00 |
Buffer overflow in Adobe Flash Player before 11.7.700.275 and 11.8.x through 13.0.x before 13.0.0.182 on Windows and OS X and before 11.2.202.350 on Linux, Adobe AIR before 13.0.0.83 on Android, Adobe AIR SDK before 13.0.0.83, and Adobe AIR SDK & Compiler before 13.0.0.83 allows attackers to execute arbitrary code via unspecified vectors. | 9.3 |
||
19h00 +00:00 |
Adobe Flash Player before 11.7.700.275 and 11.8.x through 13.0.x before 13.0.0.182 on Windows and OS X and before 11.2.202.350 on Linux, Adobe AIR before 13.0.0.83 on Android, Adobe AIR SDK before 13.0.0.83, and Adobe AIR SDK & Compiler before 13.0.0.83 allow attackers to bypass intended access restrictions and obtain sensitive information via unspecified vectors. | 5 |
||
19h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 11.7.700.275 and 11.8.x through 13.0.x before 13.0.0.182 on Windows and OS X and before 11.2.202.350 on Linux, Adobe AIR before 13.0.0.83 on Android, Adobe AIR SDK before 13.0.0.83, and Adobe AIR SDK & Compiler before 13.0.0.83 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. | 4.3 |
||
09h00 +00:00 |
Unspecified vulnerability in HP Smart Update Manager 5.3.5 before build 70 on Linux allows local users to gain privileges via unknown vectors. | 7.2 |
||
00h00 +00:00 |
Adobe Flash Player before 11.7.700.272 and 11.8.x through 12.0.x before 12.0.0.77 on Windows and OS X, and before 11.2.202.346 on Linux, allows remote attackers to bypass the Same Origin Policy via unspecified vectors. | 6.4 |
||
00h00 +00:00 |
Adobe Flash Player before 11.7.700.272 and 11.8.x through 12.0.x before 12.0.0.77 on Windows and OS X, and before 11.2.202.346 on Linux, allows attackers to read the clipboard via unspecified vectors. | 5 |
||
01h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 11.7.700.269 and 11.8.x through 12.0.x before 12.0.0.70 on Windows and Mac OS X and before 11.2.202.341 on Linux, Adobe AIR before 4.0.0.1628 on Android, Adobe AIR SDK before 4.0.0.1628, and Adobe AIR SDK & Compiler before 4.0.0.1628 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 11.7.700.269 and 11.8.x through 12.0.x before 12.0.0.70 on Windows and Mac OS X and before 11.2.202.341 on Linux, Adobe AIR before 4.0.0.1628 on Android, Adobe AIR SDK before 4.0.0.1628, and Adobe AIR SDK & Compiler before 4.0.0.1628 do not prevent access to address information, which makes it easier for attackers to bypass the ASLR protection mechanism via unspecified vectors. | 7.8 |
||
01h00 +00:00 |
Integer underflow in Adobe Flash Player before 11.7.700.261 and 11.8.x through 12.0.x before 12.0.0.44 on Windows and Mac OS X, and before 11.2.202.336 on Linux, allows remote attackers to execute arbitrary code via unspecified vectors. | 9.8 |
Critical |
|
01h00 +00:00 |
Adobe Flash Player before 11.7.700.260 and 11.8.x and 11.9.x before 12.0.0.38 on Windows and Mac OS X and before 11.2.202.335 on Linux, Adobe AIR before 4.0.0.1390, Adobe AIR SDK before 4.0.0.1390, and Adobe AIR SDK & Compiler before 4.0.0.1390 allow attackers to bypass unspecified protection mechanisms via unknown vectors. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 11.7.700.260 and 11.8.x and 11.9.x before 12.0.0.38 on Windows and Mac OS X and before 11.2.202.335 on Linux, Adobe AIR before 4.0.0.1390, Adobe AIR SDK before 4.0.0.1390, and Adobe AIR SDK & Compiler before 4.0.0.1390 allow attackers to defeat the ASLR protection mechanism by leveraging an "address leak." | 10 |
||
01h00 +00:00 |
RealVNC VNC 5.0.6 on Mac OS X, Linux, and UNIX allows local users to gain privileges via a crafted argument to the (1) vncserver, (2) vncserver-x11, or (3) Xvnc helper. | 7.2 |
||
14h00 +00:00 |
Mozilla Firefox before 26.0 and SeaMonkey before 2.23 on Linux allow user-assisted remote attackers to read clipboard data by leveraging certain middle-click paste operations. | 4.3 |
||
16h00 +00:00 |
The default configuration of Parallels Plesk Panel 9.0.x and 9.2.x on UNIX, and Small Business Panel 10.x on UNIX, has an improper ScriptAlias directive for phppath, which makes it easier for remote attackers to execute arbitrary code via a crafted request, a different vulnerability than CVE-2012-1823. | 7.5 |
||
08h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 11.7.700.232 and 11.8.x before 11.8.800.94 on Windows and Mac OS X, before 11.2.202.297 on Linux, before 11.1.111.64 on Android 2.x and 3.x, and before 11.1.115.69 on Android 4.x allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 11.7.700.232 and 11.8.x before 11.8.800.94 on Windows and Mac OS X, before 11.2.202.297 on Linux, before 11.1.111.64 on Android 2.x and 3.x, and before 11.1.115.69 on Android 4.x allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
08h00 +00:00 |
Integer overflow in Adobe Flash Player before 11.7.700.232 and 11.8.x before 11.8.800.94 on Windows and Mac OS X, before 11.2.202.297 on Linux, before 11.1.111.64 on Android 2.x and 3.x, and before 11.1.115.69 on Android 4.x allows attackers to execute arbitrary code via PCM data that is not properly handled during resampling. | 10 |
||
14h00 +00:00 |
FortiClient before 4.3.5.472 on Windows, before 4.0.3.134 on Mac OS X, and before 4.0 on Android; FortiClient Lite before 4.3.4.461 on Windows; FortiClient Lite 2.0 through 2.0.0223 on Android; and FortiClient SSL VPN before 4.0.2258 on Linux proceed with an SSL session after determining that the server's X.509 certificate is invalid, which allows man-in-the-middle attackers to obtain sensitive information by leveraging a password transmission that occurs before the user warning about the certificate problem. | 5.4 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, and CVE-2013-3334. | 10 |
||
08h00 +00:00 |
Integer overflow in IBM Notes 8.5.x before 8.5.3 FP4 Interim Fix 1 and 9.x before 9.0 Interim Fix 1 on Windows, and 8.5.x before 8.5.3 FP5 and 9.x before 9.0.1 on Linux, allows remote attackers to execute arbitrary code via a malformed PNG image in a previewed e-mail message, aka SPR NPEI96K82Q. | 6.8 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.75 and 11.x before 11.7.700.169 on Windows and Mac OS X, before 10.3.183.75 and 11.x before 11.2.202.280 on Linux, before 11.1.111.50 on Android 2.x and 3.x, and before 11.1.115.54 on Android 4.x; Adobe AIR before 3.7.0.1530; and Adobe AIR SDK & Compiler before 3.7.0.1530 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-1380. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.75 and 11.x before 11.7.700.169 on Windows and Mac OS X, before 10.3.183.75 and 11.x before 11.2.202.280 on Linux, before 11.1.111.50 on Android 2.x and 3.x, and before 11.1.115.54 on Android 4.x; Adobe AIR before 3.7.0.1530; and Adobe AIR SDK & Compiler before 3.7.0.1530 do not properly initialize pointer arrays, which allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.75 and 11.x before 11.7.700.169 on Windows and Mac OS X, before 10.3.183.75 and 11.x before 11.2.202.280 on Linux, before 11.1.111.50 on Android 2.x and 3.x, and before 11.1.115.54 on Android 4.x; Adobe AIR before 3.7.0.1530; and Adobe AIR SDK & Compiler before 3.7.0.1530 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-1378. | 10 |
||
10h00 +00:00 |
Use-after-free vulnerability in Google Chrome before 26.0.1410.43 on Linux allows remote attackers to cause a denial of service or possibly have unspecified other impact by leveraging the presence of an extension that creates a pop-up window. | 7.5 |
||
09h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.183.68 and 11.x before 11.6.602.180 on Windows and Mac OS X, before 10.3.183.68 and 11.x before 11.2.202.275 on Linux, before 11.1.111.44 on Android 2.x and 3.x, and before 11.1.115.48 on Android 4.x; Adobe AIR before 3.6.0.6090; Adobe AIR SDK before 3.6.0.6090; and Adobe AIR SDK & Compiler before 3.6.0.6090 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
09h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 10.3.183.68 and 11.x before 11.6.602.180 on Windows and Mac OS X, before 10.3.183.68 and 11.x before 11.2.202.275 on Linux, before 11.1.111.44 on Android 2.x and 3.x, and before 11.1.115.48 on Android 4.x; Adobe AIR before 3.6.0.6090; Adobe AIR SDK before 3.6.0.6090; and Adobe AIR SDK & Compiler before 3.6.0.6090 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
09h00 +00:00 |
Adobe Flash Player before 10.3.183.68 and 11.x before 11.6.602.180 on Windows and Mac OS X, before 10.3.183.68 and 11.x before 11.2.202.275 on Linux, before 11.1.111.44 on Android 2.x and 3.x, and before 11.1.115.48 on Android 4.x; Adobe AIR before 3.6.0.6090; Adobe AIR SDK before 3.6.0.6090; and Adobe AIR SDK & Compiler before 3.6.0.6090 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
09h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 10.3.183.68 and 11.x before 11.6.602.180 on Windows and Mac OS X, before 10.3.183.68 and 11.x before 11.2.202.275 on Linux, before 11.1.111.44 on Android 2.x and 3.x, and before 11.1.115.48 on Android 4.x; Adobe AIR before 3.6.0.6090; Adobe AIR SDK before 3.6.0.6090; and Adobe AIR SDK & Compiler before 3.6.0.6090 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
20h00 +00:00 |
Unspecified vulnerability in the MathML implementation in WebKit in Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, has unknown impact and remote attack vectors, related to a "high severity security issue." | 7.5 |
||
15h00 +00:00 |
Cisco Prime LAN Management Solution (LMS) 4.1 through 4.2.2 on Linux does not properly validate authentication and authorization requests in TCP sessions, which allows remote attackers to execute arbitrary commands via a crafted session, aka Bug ID CSCuc79779. | 10 |
||
20h00 +00:00 |
Google Chrome before 24.0.1312.52 on Linux uses weak permissions for shared memory segments, which has unspecified impact and attack vectors. | 7.5 |
||
21h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.50 and 11.x before 11.5.502.146 on Windows and Mac OS X, before 10.3.183.50 and 11.x before 11.2.202.261 on Linux, before 11.1.111.31 on Android 2.x and 3.x, and before 11.1.115.36 on Android 4.x; Adobe AIR before 3.5.0.1060; and Adobe AIR SDK before 3.5.0.1060 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
10h00 +00:00 |
IBM Advanced Settings Utility (ASU) through 3.62 and 3.70 through 9.21 and Bootable Media Creator (BoMC) through 2.30 and 3.00 through 9.21 on Linux allow local users to overwrite arbitrary files via a symlink attack on a (1) temporary file or (2) log file. | 3.3 |
||
23h00 +00:00 |
The SSH USERAUTH CHANGE REQUEST feature in SSH Tectia Server 6.0.4 through 6.0.20, 6.1.0 through 6.1.12, 6.2.0 through 6.2.5, and 6.3.0 through 6.3.2 on UNIX and Linux, when old-style password authentication is enabled, allows remote attackers to bypass authentication via a crafted session involving entry of blank passwords, as demonstrated by a root login session from a modified OpenSSH client with an added input_userauth_passwd_changereq call in sshconnect2.c. | 9.3 |
||
10h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
10h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
10h00 +00:00 |
Google V8 before 3.13.7.5, as used in Google Chrome before 23.0.1271.64, does not properly perform write operations, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors. | 7.5 |
||
21h00 +00:00 |
Unspecified vulnerability in the Core RDBMS component in Oracle Database Server 10.2.0.4, 10.2.0.5, 11.1.0.7, 11.2.0.2, and 11.2.0.3, when running on Unix and Linux platforms, allows local users to affect integrity and availability via unknown vectors. | 3.3 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
The VPN downloader in the download_install component in Cisco AnyConnect Secure Mobility Client 3.1.x before 3.1.00495 on Linux accepts arbitrary X.509 server certificates without user interaction, which allows remote attackers to obtain sensitive information via vectors involving an invalid certificate, aka Bug ID CSCua11967. | 5 |
||
17h00 +00:00 |
Adobe Flash Player before 10.3.183.23 and 11.x before 11.4.402.265 on Windows and Mac OS X, before 10.3.183.23 and 11.x before 11.2.202.238 on Linux, before 11.1.111.16 on Android 2.x and 3.x, and before 11.1.115.17 on Android 4.x; Adobe AIR before 3.4.0.2540; and Adobe AIR SDK before 3.4.0.2540 allow attackers to cause a denial of service (application crash) by leveraging a logic error during handling of Firefox dialogs. | 5 |
||
08h00 +00:00 |
The WebGL implementation in Mozilla Firefox before 15.0, Firefox ESR 10.x before 10.0.7, Thunderbird before 15.0, Thunderbird ESR 10.x before 10.0.7, and SeaMonkey before 2.12 on Linux, when a large number of sampler uniforms are used, does not properly interact with Mesa drivers, which allows remote attackers to execute arbitrary code or cause a denial of service (stack memory corruption) via a crafted web site. | 9.3 |
||
08h00 +00:00 |
Unspecified vulnerability in the XML feature in IBM DB2 9.7 before FP6 on Linux, UNIX, and Windows allows remote authenticated users to read arbitrary XML files via unknown vectors. | 3.5 |
||
08h00 +00:00 |
Multiple unspecified vulnerabilities in Adobe Reader through 10.1.4 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted PDF document, related to "sixteen more crashes affecting Windows, OS X, or both systems." | 9.3 |
||
16h00 +00:00 |
Opera before 12.01 on Windows and UNIX, and before 11.66 and 12.x before 12.01 on Mac OS X, ignores some characters in HTML documents in unspecified circumstances, which makes it easier for remote attackers to conduct cross-site scripting (XSS) attacks via a crafted document. | 4.3 |
||
16h00 +00:00 |
Opera before 12.01 on Windows and UNIX, and before 11.66 and 12.x before 12.01 on Mac OS X, allows user-assisted remote attackers to trick users into downloading and executing arbitrary files via a small window for the download dialog, a different vulnerability than CVE-2012-1924. | 6.8 |
||
16h00 +00:00 |
Opera before 12.01 on Windows and UNIX, and before 11.66 and 12.x before 12.01 on Mac OS X, does not properly escape characters in DOM elements, which makes it easier for remote attackers to bypass cross-site scripting (XSS) protection mechanisms via a crafted HTML document. | 4.3 |
||
16h00 +00:00 |
Unspecified vulnerability in Opera before 12.01 on Windows and UNIX, and before 11.66 and 12.x before 12.01 on Mac OS X, has unknown impact and attack vectors, related to a "low severity issue." | 10 |
||
15h00 +00:00 |
Google Chrome before 21.0.1180.57 on Linux does not properly isolate renderer processes, which allows remote attackers to cause a denial of service (cross-process interference) via unspecified vectors. | 5 |
||
15h00 +00:00 |
Google Chrome before 21.0.1180.57 on Linux does not properly handle tabs, which allows remote attackers to execute arbitrary code or cause a denial of service (application crash) via unspecified vectors. | 7.5 |
||
13h00 +00:00 |
Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, does not request user confirmation before continuing a large series of downloads, which allows user-assisted remote attackers to cause a denial of service (resource consumption) via a crafted web site. | 4.3 |
||
13h00 +00:00 |
The drag-and-drop implementation in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows user-assisted remote attackers to bypass intended file access restrictions via a crafted web site. | 4.3 |
||
13h00 +00:00 |
Off-by-one error in the GIF decoder in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted image. | 4.3 |
||
13h00 +00:00 |
Multiple unspecified vulnerabilities in the PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allow remote attackers to have an unknown impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
Multiple integer overflows in the PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allow remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
The PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, does not properly handle object linkage, which allows remote attackers to cause a denial of service (use-after-free) or possibly have unspecified other impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
The webRequest API in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, does not properly interact with the Chrome Web Store, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted web site. | 6.8 |
||
13h00 +00:00 |
Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to obtain potentially sensitive information about pointer values by leveraging access to a WebUI renderer process. | 5 |
||
13h00 +00:00 |
Use-after-free vulnerability in the PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
The PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors that trigger out-of-bounds write operations. | 7.5 |
||
13h00 +00:00 |
Use-after-free vulnerability in the Cascading Style Sheets (CSS) DOM implementation in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
Buffer overflow in the WebP decoder in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted WebP image. | 6.8 |
||
13h00 +00:00 |
The date-picker implementation in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows user-assisted remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted web site. | 6.8 |
||
22h00 +00:00 |
HP System Management Homepage (SMH) before 7.1.1 does not have an off autocomplete attribute for unspecified form fields, which makes it easier for remote attackers to obtain access by leveraging an unattended workstation. | 10 |
||
22h00 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) before 7.1.1 allows remote attackers to cause a denial of service, or possibly obtain sensitive information or modify data, via unknown vectors. | 7.5 |
||
22h00 +00:00 |
HP System Management Homepage (SMH) before 7.1.1 does not properly validate input, which allows remote authenticated users to have an unspecified impact via unknown vectors. | 9 |
||
22h00 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) before 7.1.1 allows remote authenticated users to gain privileges and obtain sensitive information via unknown vectors. | 9 |
||
22h00 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) before 7.1.1 allows local users to obtain sensitive information via unknown vectors. | 4.9 |
||
20h00 +00:00 |
The VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 2.x before 2.5 MR6 on Windows, and 2.x before 2.5 MR6 and 3.x before 3.0 MR8 on Mac OS X and Linux, does not properly validate binaries that are received by the downloader process, which allows remote attackers to execute arbitrary code via vectors involving (1) ActiveX or (2) Java components, aka Bug ID CSCtw47523. | 9.3 |
||
16h00 +00:00 |
Google Chrome before 19.0.1084.52 on Linux does not properly perform a cast of an unspecified variable, which allows remote attackers to cause a denial of service or possibly have unknown other impact by leveraging an error in the GTK implementation of the UI. | 7.5 |
||
19h00 +00:00 |
Integer signedness error in the db2dasrrm process in the DB2 Administration Server (DAS) in IBM DB2 9.1 through FP11, 9.5 before FP9, and 9.7 through FP5 on UNIX platforms allows remote attackers to execute arbitrary code via a crafted request that triggers a heap-based buffer overflow. | 7.5 |
||
19h00 +00:00 |
Unspecified vulnerability in IBM Tivoli Monitoring Agent (ITMA), as used in IBM DB2 9.5 before FP9 on UNIX, allows local users to gain privileges via unknown vectors. | 7.2 |
||
20h00 +00:00 |
The Matrix3D component in Adobe Flash Player before 10.3.183.16 and 11.x before 11.1.102.63 on Windows, Mac OS X, Linux, and Solaris; before 11.1.111.7 on Android 2.x and 3.x; and before 11.1.115.7 on Android 4.x allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.16 and 11.x before 11.1.102.63 on Windows, Mac OS X, Linux, and Solaris; before 11.1.111.7 on Android 2.x and 3.x; and before 11.1.115.7 on Android 4.x does not properly handle integers, which allows attackers to obtain sensitive information via unspecified vectors. | 5 |
||
17h00 +00:00 |
The Linux kernel, when using IPv6, allows remote attackers to determine whether a host is sniffing the network by sending an ICMPv6 Echo Request to a multicast address and determining whether an Echo Reply is sent, as demonstrated by thcping. | 5 |
||
02h00 +00:00 |
Buffer overflow in Novell iPrint Server in Novell Open Enterprise Server 2 (OES2) through SP3 on Linux allows remote attackers to execute arbitrary code via a crafted attributes-natural-language field. | 7.5 |
||
15h00 +00:00 |
Mozilla Firefox 4.x through 9.0 and SeaMonkey before 2.7 on Linux and Mac OS X set weak permissions for Firefox Recovery Key.html, which might allow local users to read a Firefox Sync key via standard filesystem operations. | 2.1 |
||
01h00 +00:00 |
Unspecified vulnerability in HP Operations Agent 11.00 and Performance Agent 4.73 and 5.0 on AIX, HP-UX, Linux, and Solaris allows local users to bypass intended directory-access restrictions via unknown vectors. | 3.2 |
||
23h00 +00:00 |
Stack-based buffer overflow in the ActionScript Virtual Machine (AVM) component in Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows remote attackers to execute arbitrary code via unspecified vectors. | 9.3 |
||
23h00 +00:00 |
Stack-based buffer overflow in the ActionScript Virtual Machine (AVM) component in Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows attackers to execute arbitrary code or cause a denial of service via unspecified vectors. | 9.3 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows attackers to execute arbitrary code or cause a denial of service (browser crash) via unspecified vectors, related to a "logic error issue." | 9.3 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows attackers to bypass intended access restrictions and obtain sensitive information via unspecified vectors, related to a "security control bypass." | 5 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows remote attackers to execute arbitrary code via crafted streaming media, related to a "logic error vulnerability." | 9.3 |
||
23h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows remote attackers to inject arbitrary web script or HTML via a crafted URL, related to a "universal cross-site scripting issue," as exploited in the wild in September 2011. | 4.3 |
||
08h00 +00:00 |
Google Chrome before 14.0.835.163 on Linux does not use the PIC and PIE compiler options for position-independent code, which has unspecified impact and attack vectors. | 7.5 |
||
19h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted SWF file, as demonstrated by "about 400 unique crash signatures." | 9.3 |
||
19h00 +00:00 |
native/unix/native/jsvc-unix.c in jsvc in the Daemon component 1.0.3 through 1.0.6 in Apache Commons, as used in Apache Tomcat 5.5.32 through 5.5.33, 6.0.30 through 6.0.32, and 7.0.x before 7.0.20 on Linux, does not drop capabilities, which allows remote attackers to bypass read permissions for files via a request to an application. | 5 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2140, CVE-2011-2417, and CVE-2011-2425. | 10 |
||
20h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2138 and CVE-2011-2416. | 10 |
||
20h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2136 and CVE-2011-2416. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows remote attackers to bypass the Same Origin Policy and obtain sensitive information via unspecified vectors. | 6.4 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2135, CVE-2011-2417, and CVE-2011-2425. | 10 |
||
20h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2130, CVE-2011-2134, CVE-2011-2137, and CVE-2011-2415. | 10 |
||
20h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2130, CVE-2011-2134, CVE-2011-2137, and CVE-2011-2414. | 10 |
||
20h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2136 and CVE-2011-2138. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2135, CVE-2011-2140, and CVE-2011-2425. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2135, CVE-2011-2140, and CVE-2011-2417. | 10 |
||
20h00 +00:00 |
IBM InfoSphere Information Server 8.5 and 8.5.0.1 on Unix and Linux, as used in IBM InfoSphere DataStage 8.5 and 8.5.0.1 and other products, uses weak permissions for unspecified files, which allows local users to gain privileges via unknown vectors. | 7.2 |
||
20h00 +00:00 |
IBM InfoSphere Information Server 8.5 and 8.5.0.1 on Unix and Linux, as used in IBM InfoSphere DataStage 8.5 and 8.5.0.1 and other products, assigns incorrect ownership to unspecified files, which allows local users to gain privileges via unknown vectors. | 7.2 |
||
19h16 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2134, CVE-2011-2137, CVE-2011-2414, and CVE-2011-2415. | 10 |
||
19h16 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2130, CVE-2011-2137, CVE-2011-2414, and CVE-2011-2415. | 10 |
||
19h16 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2130, CVE-2011-2134, CVE-2011-2414, and CVE-2011-2415. | 10 |
||
23h00 +00:00 |
sys/sys_unix.c in the ioQuake3 engine on Unix and Linux, as used in World of Padman 1.5.x before 1.5.1.1 and OpenArena 0.8.x-15 and 0.8.x-16, allows remote game servers to execute arbitrary commands via shell metacharacters in a long fs_game variable. | 7.5 |
||
18h00 +00:00 |
IBM Lotus Symphony 3 before FP3 on Linux allows remote attackers to cause a denial of service (application crash) via a certain sample document. | 4.3 |
||
21h00 +00:00 |
Adobe Flash Player before 10.3.181.26 on Windows, Mac OS X, Linux, and Solaris, and 10.3.185.23 and earlier on Android, allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, as exploited in the wild in June 2011. | 10 |
||
17h00 +00:00 |
The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.5.3041, and 3.0.x before 3.0.629, on Linux and Mac OS X downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a Java applet, aka Bug ID CSCsy05934. | 9.3 |
||
18h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows remote attackers to execute arbitrary code via ActionScript that improperly handles a long array object. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to obtain sensitive information via unspecified vectors. | 5 |
||
20h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-0620, CVE-2011-0621, and CVE-2011-0622. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-0619, CVE-2011-0621, and CVE-2011-0622. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-0619, CVE-2011-0620, and CVE-2011-0622. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-0619, CVE-2011-0620, and CVE-2011-0621. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors, related to a "bounds checking" issue, a different vulnerability than CVE-2011-0624, CVE-2011-0625, and CVE-2011-0626. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors, related to a "bounds checking" issue, a different vulnerability than CVE-2011-0623, CVE-2011-0625, and CVE-2011-0626. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors, related to a "bounds checking" issue, a different vulnerability than CVE-2011-0623, CVE-2011-0624, and CVE-2011-0626. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors, related to a "bounds checking" issue, a different vulnerability than CVE-2011-0623, CVE-2011-0624, and CVE-2011-0625. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via crafted Flash content, as possibly exploited in the wild in May 2011 by a Microsoft Office document with an embedded .swf file. | 9.3 |
||
10h00 +00:00 |
The do_extendedOp function in ibmslapd in IBM Tivoli Directory Server (TDS) 6.0 before 6.0.0.62 (aka 6.0.0.8-TIV-ITDS-IF0004) on Linux, Solaris, and Windows allows remote authenticated users to cause a denial of service (ABEND) via a malformed LDAP extended operation that triggers certain comparisons involving the NULL operation OID. | 4 |
||
19h00 +00:00 |
VMware vmrun, as used in VIX API 1.x before 1.10.3 and VMware Workstation 6.5.x and 7.x before 7.1.4 build 385536 on Linux, might allow local users to gain privileges via a Trojan horse shared library in an unspecified directory. | 6.9 |
||
20h00 +00:00 |
Unspecified vulnerability in Hitachi EUR Form Client before 05-10 -/D 2010.11.15 and 05-10-CA (* 2) 2010.11.15; Hitachi EUR Form Service before 05-10 -/D 2010.11.15; and uCosminexus EUR Form Service before 07-60 -/D 2010.11.15 on Windows, before 05-10 -/D 2010.11.15 and 07-50 -/D 2010.11.15 on Linux, and before 07-50 -/C 2010.11.15 on AIX; allows remote attackers to execute arbitrary code via unknown attack vectors. | 10 |
||
19h00 +00:00 |
Cross-site scripting (XSS) vulnerability in HP Insight Diagnostics Online Edition before 8.5.1.3712 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. | 4.3 |
||
14h00 +00:00 |
The cook codec in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, Mac RealPlayer 11.0 through 12.0.0.1444, and Linux RealPlayer 11.0.2.1744 does not properly perform initialization, which has unspecified impact and attack vectors. | 10 |
||
14h00 +00:00 |
The cook codec in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Mac RealPlayer 11.0 through 11.1, and Linux RealPlayer 11.0.2.1744 does not properly initialize the number of channels, which allows attackers to obtain unspecified "memory access" via unknown vectors. | 5 |
||
14h00 +00:00 |
Use-after-free vulnerability in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.0.1, Mac RealPlayer 11.0 through 11.1, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted StreamTitle tag in an ICY SHOUTcast stream, related to the SMIL file format. | 9.3 |
||
14h00 +00:00 |
Integer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.0.1, Mac RealPlayer 11.0 through 11.1, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a malformed MLLT atom in an AAC file. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, Mac RealPlayer 11.0 through 11.1, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code via malformed multi-rate data in an audio stream. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.1, Mac RealPlayer 11.0 through 11.1, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code via a large Screen Width value in the Screen Descriptor header of a GIF87a file in an RTSP stream. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, Mac RealPlayer 11.0 through 12.0.0.1444, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code by specifying many subbands in cook audio codec information in a Real Audio file. | 9.3 |
||
14h00 +00:00 |
The drv2.dll (aka RV20 decompression) module in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, RealPlayer Enterprise 2.1.2 and 2.1.3, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted value of an unspecified length field in an RV20 video stream. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Mac RealPlayer 11.0 through 11.1, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to have an unspecified impact via a crafted SIPR file. | 9.3 |
||
14h00 +00:00 |
Multiple heap-based buffer overflows in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allow remote attackers to have an unspecified impact via a crafted RealMedia file. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Mac RealPlayer 11.0 through 12.0.0.1444, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to have an unspecified impact via a crafted RA5 file. | 9.3 |
||
14h00 +00:00 |
Array index error in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer Enterprise 2.1.2, Mac RealPlayer 11.0 through 11.1, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code via a malformed Media Properties Header (aka MDPR) in a RealMedia file. | 9.3 |
||
14h00 +00:00 |
Integer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to have an unspecified impact via crafted frame dimensions in an SIPR stream. | 9.3 |
||
14h00 +00:00 |
RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allow remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted RealMedia video file. | 9.3 |
||
14h00 +00:00 |
The RealAudio codec in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, Mac RealPlayer 11.0 through 12.0.0.1444, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted audio stream in a RealMedia file. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in the cook codec in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code via unspecified data in the initialization buffer. | 9.3 |
||
14h00 +00:00 |
Multiple heap-based buffer overflows in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, and Linux RealPlayer 11.0.2.1744 allow remote attackers to have an unspecified impact via a crafted header in an IVR file. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, RealPlayer Enterprise 2.1.2 and 2.1.3, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code via crafted ImageMap data in a RealMedia file, related to certain improper integer calculations. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code via a crafted conditional component in AAC frame data. | 9.3 |
||
14h00 +00:00 |
Integer overflow in the pnen3260.dll module in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.1, Mac RealPlayer 11.0 through 11.1, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code via a crafted TIT2 atom in an AAC file. | 9.3 |
||
19h00 +00:00 |
/opt/rv/Versions/CurrentVersion/Mcu/Config/Mcu.val in Cisco Unified Videoconferencing (UVC) System 5110 and 5115, when the Linux operating system is used, uses a weak hashing algorithm for the (1) administrator and (2) operator passwords, which makes it easier for local users to obtain sensitive information by recovering the cleartext values, aka Bug ID CSCti54010. | 4.9 |
||
19h00 +00:00 |
Cisco Unified Videoconferencing (UVC) System 5110 and 5115, when the Linux operating system is used, uses world-readable permissions for the /etc/shadow file, which allows local users to discover encrypted passwords by reading this file, aka Bug ID CSCti54043. | 4.9 |
||
18h00 +00:00 |
Cisco Unified Videoconferencing (UVC) System 5110 and 5115, when the Linux operating system is used, has a default password for the (1) root, (2) cs, and (3) develop accounts, which makes it easier for remote attackers to obtain access via the (a) FTP or (b) SSH daemon, aka Bug ID CSCti54008. | 10 |
||
16h00 +00:00 |
Adobe Flash Player before 9.0.289.0 and 10.x before 10.1.102.64 on Windows, Mac OS X, Linux, and Solaris and 10.1.95.1 on Android, and authplay.dll (aka AuthPlayLib.bundle or libauthplay.so.0.0.0) in Adobe Reader and Acrobat 9.x through 9.4, allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via crafted SWF content, as exploited in the wild in October 2010. | 9.3 |
||
18h00 +00:00 |
Google Chrome before 6.0.472.59 on Linux does not properly implement the Khmer locale, which allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via unknown vectors. | 9.8 |
Critical |
|
17h26 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) for Linux 6.0 and 6.1 allows remote authenticated users to obtain sensitive information and gain root privileges via unknown vectors. | 9 |
||
18h00 +00:00 |
Adobe Flash Media Server (FMS) before 3.0.6, and 3.5.x before 3.5.4, allows attackers to execute arbitrary code via unspecified vectors, related to a "JS method vulnerability." | 10 |
||
18h00 +00:00 |
Adobe Flash Media Server (FMS) before 3.0.6, and 3.5.x before 3.5.4, allows attackers to cause a denial of service via unspecified vectors, related to a "JS method issue." | 5 |
||
18h00 +00:00 |
Unspecified vulnerability in Adobe Flash Media Server (FMS) before 3.0.6, and 3.5.x before 3.5.4, allows attackers to cause a denial of service (memory consumption) via unknown vectors. | 5 |
||
18h00 +00:00 |
Adobe Flash Media Server (FMS) before 3.0.6, and 3.5.x before 3.5.4, allows attackers to cause a denial of service via unspecified vectors, related to an "input validation issue." | 5 |
||
16h00 +00:00 |
Multiple buffer overflows in the iSNS implementation in isns.c in (1) Linux SCSI target framework (aka tgt or scsi-target-utils) before 1.0.6, (2) iSCSI Enterprise Target (aka iscsitarget or IET) 1.4.20.1 and earlier, and (3) Generic SCSI Target Subsystem for Linux (aka SCST or iscsi-scst) 1.0.1.1 and earlier allow remote attackers to cause a denial of service (memory corruption and daemon crash) or possibly execute arbitrary code via (a) a long iSCSI Name string in an SCN message or (b) an invalid PDU. | 5 |
||
17h00 +00:00 |
Mathematica 7, when running on Linux, allows local users to overwrite arbitrary files via a symlink attack on (1) files within /tmp/MathLink/ or (2) /tmp/fonts$$.conf. | 1.9 |
||
12h00 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) 6.0 before 6.0.0-95 on Linux, and 6.0 before 6.0.0.96 on Windows, allows remote authenticated users to obtain sensitive information, modify data, and cause a denial of service via unknown vectors. | 4.6 |
||
16h00 +00:00 |
Format string vulnerability in vmrun in VMware VIX API 1.6.x, VMware Workstation 6.5.x before 6.5.4 build 246459, VMware Player 2.5.x before 2.5.4 build 246459, and VMware Server 2.x on Linux, and VMware Fusion 2.x before 2.0.7 build 246742, allows local users to gain privileges via format string specifiers in process metadata. | 7.2 |
||
15h00 +00:00 |
Director Agent 6.1 before 6.1.2.3 in IBM Systems Director on AIX and Linux uses incorrect permissions for the (1) diruninstall and (2) opt/ibm/director/bin/wcitinst scripts, which allows local users to gain privileges by executing these scripts. | 7.2 |
||
19h00 +00:00 |
Firewall Builder 3.0.4, 3.0.5, and 3.0.6, when running on Linux, allows local users to gain privileges via a symlink attack on an unspecified temporary file that is created by the iptables script. | 3.3 |
||
19h00 +00:00 |
Unspecified vulnerability in Cisco Security Agent 5.2 before 5.2.0.285, when running on Linux, allows remote attackers to cause a denial of service (kernel panic) via "a series of TCP packets." | 7.8 |
||
19h00 +00:00 |
The do_extendedOp function in ibmslapd in IBM Tivoli Directory Server (TDS) 6.2 on Linux allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a crafted SecureWay 3.2 Event Registration Request (aka a 1.3.18.0.2.12.1 request). | 5 |
||
15h00 +00:00 |
The MessageDigest.isEqual function in Java Runtime Environment (JRE) in Sun Java SE in JDK and JRE 5.0 before Update 22, JDK and JRE 6 before Update 17, SDK and JRE 1.3.x before 1.3.1_27, and SDK and JRE 1.4.x before 1.4.2_24 allows remote attackers to spoof HMAC-based digital signatures, and possibly bypass authentication, via unspecified vectors related to "timing attack vulnerabilities," aka Bug Id 6863503. | 5 |
||
15h00 +00:00 |
Unspecified vulnerability in Sun Java SE in JDK and JRE 5.0 before Update 22, JDK and JRE 6 before Update 17, SDK and JRE 1.3.x before 1.3.1_27, and SDK and JRE 1.4.x before 1.4.2_24 allows remote attackers to cause a denial of service (memory consumption) via crafted DER encoded data, which is not properly decoded by the ASN.1 DER input stream parser, aka Bug Id 6864911. | 5 |
||
15h00 +00:00 |
Unspecified vulnerability in Sun Java SE in JDK and JRE 5.0 before Update 22, JDK and JRE 6 before Update 17, SDK and JRE 1.3.x before 1.3.1_27, and SDK and JRE 1.4.x before 1.4.2_24 allows remote attackers to cause a denial of service (memory consumption) via crafted HTTP headers, which are not properly parsed by the ASN.1 DER input stream parser, aka Bug Id 6864911. | 5 |
||
18h00 +00:00 |
Heap-based buffer overflow in ibmdiradm in IBM Tivoli Directory Server (TDS) 6.0 on Linux allows remote attackers to have an unspecified impact via unknown vectors that trigger heap corruption, as demonstrated by a certain module in VulnDisco Pack Professional 8.11. NOTE: as of 20090903, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes. | 7.5 |
||
18h00 +00:00 |
Unspecified vulnerability in IBM Tivoli Directory Server (TDS) 6.0 on Linux allows remote attackers to cause a denial of service via unknown vectors, as demonstrated by a certain module in VulnDisco Pack Professional 8.11. NOTE: as of 20090903, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes. | 5 |
||
16h00 +00:00 |
The system.openURL function in StoneTrip Ston3D StandalonePlayer (aka S3DPlayer StandAlone) 1.6.2.4 and 1.7.0.1 and WebPlayer (aka S3DPlayer Web) 1.6.0.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the first argument (the sURL argument). | 9.3 |
||
22h00 +00:00 |
The cache manager in the client in OpenAFS 1.0 through 1.4.8 and 1.5.0 through 1.5.58, and IBM AFS 3.6 before Patch 19, on Linux allows remote attackers to cause a denial of service (system crash) via an RX response with a large error-code value that is interpreted as a pointer and dereferenced, related to use of the ERR_PTR macro. | 7.8 |
||
14h00 +00:00 |
Sun xVM VirtualBox 2.0.0, 2.0.2, 2.0.4, 2.0.6r39760, 2.1.0, 2.1.2, and 2.1.4r42893 on Linux allows local users to gain privileges via a hardlink attack, which preserves setuid/setgid bits on Linux, related to DT_RPATH:$ORIGIN. | 6.9 |
||
23h00 +00:00 |
Unspecified vulnerability in Adobe Flash Player for Linux 10.0.12.36, and 9.0.151.0 and earlier, allows remote attackers to execute arbitrary code via a crafted SWF file. | 9.3 |
||
19h00 +00:00 |
Acronis True Image Echo Server 9.x build 8072 on Linux does not properly encrypt backups to an FTP server, which allows remote attackers to obtain sensitive information. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 5 |
||
19h00 +00:00 |
Calacode @Mail 5.41 on Linux does not require administrative authentication for build-plesk-upgrade.php, which allows remote attackers to obtain sensitive information by creating and downloading a backup archive of the entire @Mail directory tree. NOTE: this can be leveraged for remote exploitation of CVE-2008-3395. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 7.8 |
||
17h20 +00:00 |
Stack-based buffer overflow in the libbecompat library in Ingres 2.6, Ingres 2006 release 1 (aka 9.0.4), and Ingres 2006 release 2 (aka 9.1.0) on Linux and HP-UX allows local users to gain privileges by setting a long value of an environment variable before running (1) verifydb, (2) iimerge, or (3) csreport. | 4.6 |
||
12h00 +00:00 |
Untrusted search path vulnerability in dbmsrv in SAP MaxDB 7.6.03.15 on Linux allows local users to gain privileges via a modified PATH environment variable. | 4.4 |
||
14h00 +00:00 |
Calacode @Mail 5.41 on Linux uses weak world-readable permissions for (1) webmail/libs/Atmail/Config.php and (2) webmail/webadmin/.htpasswd, which allows local users to obtain sensitive information by reading these files. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 5 |
||
16h00 +00:00 |
Unspecified vulnerability in Sun Java Web Console 3.0.2, 3.0.3, and 3.0.4 allows remote attackers to bypass intended access restrictions and determine the existence of files or directories via unknown vectors. | 7.8 |
||
23h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Numara FootPrints for Linux 8.1 allows remote attackers to inject arbitrary web script or HTML via the Title form field when setting an appointment. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 4.3 |
||
23h00 +00:00 |
MRcgi/MRProcessIncomingForms.pl in Numara FootPrints 8.1 on Linux allows remote attackers to execute arbitrary code via shell metacharacters in the PROJECTNUM parameter. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 7.5 |
||
23h00 +00:00 |
Format string vulnerability in the emf_multipart_encrypted function in mail/em-format.c in Evolution 2.12.3 and earlier allows remote attackers to execute arbitrary code via a crafted encrypted message, as demonstrated using the Version field. | 6.8 |
||
18h00 +00:00 |
Heap-based buffer overflow in Mozilla Thunderbird before 2.0.0.12 and SeaMonkey before 1.1.8 might allow remote attackers to execute arbitrary code via a crafted external-body MIME type in an e-mail message, related to an incorrect memory allocation during message preview. | 7.5 |
||
19h00 +00:00 |
ovtopmd in HP OpenView Network Node Manager (OV NNM) 6.41, 7.01, and 7.51 allows remote attackers to cause a denial of service (crash) via a crafted TCP request that triggers an out-of-bounds memory access. | 7.8 |
||
19h00 +00:00 |
cp, when running with an option to preserve symlinks on multiple OSes, allows local, user-assisted attackers to overwrite arbitrary files via a symlink attack using crafted directories containing multiple source files that are copied to the same destination. | 6.9 |
||
21h00 +00:00 |
Apache HTTP Server, when running on Linux with a document root on a Windows share mounted using smbfs, allows remote attackers to obtain unprocessed content such as source files for .php programs via a trailing "\" (backslash), which is not handled by the intended AddType directive. | 4.3 |
||
19h00 +00:00 |
Unspecified vulnerability in the Device Manager daemon (utdevmgrd) in Sun Ray Server Software 2.0, 3.0, 3.1, and 3.1.1 allows remote attackers to cause a denial of service (daemon crash) via unspecified vectors. | 7.8 |
||
00h00 +00:00 |
Adobe Flash Player 9.x up to 9.0.48.0, 8.x up to 8.0.35.0, and 7.x up to 7.0.70.0, when running on Linux, uses insecure permissions for memory, which might allow local users to gain privileges. | 4.4 |
||
20h00 +00:00 |
Multiple unspecified vulnerabilities in IBM Hardware Management Console (HMC) 7 R3.2.0 allow attackers to gain privileges via "some HMC commands." | 4.6 |
||
17h00 +00:00 |
Cross-site scripting (XSS) vulnerability in index.php in FTP Admin 0.1.0 allows remote attackers to inject arbitrary web script or HTML via the error parameter in an error page action. | 4.3 |
||
23h00 +00:00 |
Util/difflog.pl in zsh 4.3.4 allows local users to overwrite arbitrary files via a symlink attack on temporary files. | 4.6 |
||
19h00 +00:00 |
Unspecified vulnerability in (1) DB2WATCH and (2) DB2FREEZE in IBM DB2 UDB 9.1 before Fixpak 4 has unknown impact and attack vectors. | 10 |
||
19h00 +00:00 |
Unspecified vulnerability in unspecified setuid programs in IBM DB2 UDB 9.1 before Fixpak 4 allows local users to have an unknown impact. | 7.2 |
||
19h00 +00:00 |
Unspecified vulnerability in the DB2DART tool in IBM DB2 UDB 9.1 before Fixpak 4 allows attackers to execute arbitrary commands as the DB2 instance owner, related to invocation of TPUT by DB2DART. | 10 |
||
19h00 +00:00 |
IBM DB2 UDB 9.1 before Fixpak 4 uses incorrect permissions on ACLs for DB2NODES.CFG, which has unknown impact and attack vectors. NOTE: the vendor description of this issue is too vague to be certain that it is security-related. | 10 |
||
19h00 +00:00 |
Unspecified vulnerability in the SSL LOAD GSKIT action in IBM DB2 UDB 9.1 before Fixpak 4 has unknown impact and attack vectors, involving a call to dlopen when the effective uid is root. | 7.2 |
||
19h00 +00:00 |
Unspecified vulnerability in DB2LICD in IBM DB2 UDB 9.1 before Fixpak 4 has unknown impact and attack vectors, related to creation of an "insecure directory." | 7.2 |
||
19h00 +00:00 |
IBM DB2 UDB 9.1 before Fixpak 4 assigns incorrect privileges to the (1) DB2ADMNS and (2) DB2USERS alternative groups, which has unknown impact. NOTE: the vendor description of this issue is too vague to be certain that it is security-related. | 10 |
||
19h00 +00:00 |
IBM DB2 UDB 9.1 before Fixpak 4 does not properly perform vector aggregation, which might allow attackers to cause a denial of service (divide-by-zero error and DBMS crash), related to an "overflow." NOTE: the vendor description of this issue is too vague to be certain that it is security-related. | 7.8 |
||
19h00 +00:00 |
IBM DB2 UDB 9.1 before Fixpak 4 does not properly handle use of large numbers of file descriptors, which might allow attackers to have an unknown impact involving "memory corruption." NOTE: the vendor description of this issue is too vague to be certain that it is security-related. | 9.3 |
||
21h00 +00:00 |
Multiple cross-site scripting (XSS) vulnerabilities in (1) login.php, (2) register.php, (3) post.php, and (4) common.php in Phorum before 3.4.3 allow remote attackers to inject arbitrary web script or HTML via unknown attack vectors. | 4.3 |
||
23h00 +00:00 |
Directory traversal vulnerability in Unreal Tournament Server 436 and earlier allows remote attackers to access known files via a ".." (dot dot) in an unreal:// URL. | 5 |
||
23h00 +00:00 |
Invision Power Services Invision Board 1.0 through 1.1.1, when a forum is password protected, stores the administrator password in a cookie in plaintext, which could allow remote attackers to gain access. | 5 |
||
23h00 +00:00 |
Album.pl 6.1 allows remote attackers to execute arbitrary commands, when an alternative configuration file is used, via unknown attack vectors. | 5 |
||
18h00 +00:00 |
Mozilla Firefox before 2.0.0.8 and SeaMonkey before 1.1.5, when running on Linux systems with gnome-vfs support, might allow remote attackers to read arbitrary files on SSH/sftp servers that accept key authentication by creating a web page on the target server, in which the web page contains URIs with (1) smb: or (2) sftp: schemes that access other files from the server. | 4.3 |
||
08h00 +00:00 |
Petitforum stores the liste.txt data file under the web document root with insufficient access control, which allows remote attackers to obtain sensitive information such as e-mail addresses and encrypted passwords. | 5 |
||
08h00 +00:00 |
Gallery 1.3.3 creates directories with insecure permissions, which allows local users to read, modify, or delete photos. | 4.8 |
||
23h00 +00:00 |
Cross-site scripting (XSS) vulnerability in links.php script in myPHPNuke 1.8.8, and possibly earlier versions, allows remote attackers to inject arbitrary HTML and web script via the (1) ratenum or (2) query parameters. | 4.3 |
||
17h00 +00:00 |
Heap-based buffer overflow in libmpdemux/aviheader.c in MPlayer 1.0rc1 and earlier allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a .avi file with certain large "indx truck size" and nEntriesInuse values, and a certain wLongsPerEntry value. | 7.6 |
||
21h00 +00:00 |
Buffer overflow in Hitachi Cosminexus V4 through V7, Processing Kit for XML before 20070511, Developer's Kit for Java before 20070312, and third-party products that use this software, allows attackers to have an unknown impact via certain GIF images, related to use of GIF image processing APIs by a Java application. | 10 |
||
22h00 +00:00 |
Stack-based buffer overflow in the reply_nttrans function in Samba 2.2.7a and earlier allows remote attackers to execute arbitrary code via a crafted request, a different vulnerability than CVE-2003-0201. | 7.5 |
||
17h00 +00:00 |
PHP remote file inclusion vulnerability in index.php in Achievo 1.1.0 allows remote attackers to execute arbitrary PHP code via a URL in the config_atkroot parameter. | 10 |
||
20h00 +00:00 |
formmail.php in Jetbox CMS 2.1 allows remote attackers to send arbitrary e-mails (spam) via modified recipient, _SETTINGS[allowed_email_hosts][], and subject parameters. | 5.8 |
||
20h00 +00:00 |
The png_handle_tRNS function in pngrutil.c in libpng before 1.0.25 and 1.2.x before 1.2.17 allows remote attackers to cause a denial of service (application crash) via a grayscale PNG image with a bad tRNS chunk CRC value. | 5 |
||
08h00 +00:00 |
Buffer overflow in the SockPrintf function in wu-ftpd 2.6.2 and earlier, when compiled with MAIL_ADMIN option enabled on a system that supports very long pathnames, might allow remote anonymous users to execute arbitrary code by uploading a file with a long pathname, which triggers the overflow when wu-ftpd constructs a notification message to the administrator. | 9.3 |
||
15h00 +00:00 |
Multiple cross-site scripting (XSS) vulnerabilities in freePBX 2.2.x allow remote attackers to inject arbitrary web script or HTML via the (1) From, (2) To, (3) Call-ID, (4) User-Agent, and unspecified other SIP protocol fields, which are stored in /var/log/asterisk/full and displayed by admin/modules/logfiles/asterisk-full-log.php. | 6.8 |
||
23h00 +00:00 |
Unspecified vulnerability in the Servlet Engine/Web Container in IBM WebSphere Application Server (WAS) before 6.1.0.7 has unknown impact and attack vectors. | 7.5 |
||
21h00 +00:00 |
The RFC_SET_REG_SERVER_PROPERTY function in the SAP RFC Library 6.40 and 7.00 before 20070109 implements an option for exclusive access to an RFC server, which allows remote attackers to cause a denial of service (client lockout) via unspecified vectors. NOTE: This information is based upon a vague initial disclosure. Details will be updated after the grace period has ended. | 5 |
||
00h00 +00:00 |
SQL injection vulnerability in directory.php in Super Link Exchange Script 1.0 might allow remote attackers to execute arbitrary SQL queries via the cat parameter. | 7.5 |
||
16h00 +00:00 |
Ezboo webstats, possibly 3.0.3, allows remote attackers to bypass authentication and gain access via a direct request to (1) update.php and (2) config.php. | 7.5 |
||
08h00 +00:00 |
artswrapper in aRts, when running setuid root on Linux 2.6.0 or later versions, does not check the return value of the setuid function call, which allows local users to gain root privileges by causing setuid to fail, which prevents artsd from dropping privileges. | 7.8 |
High |
|
04h00 +00:00 |
The ugidd RPC interface, by design, allows remote attackers to enumerate valid usernames by specifying arbitrary UIDs that ugidd maps to local user and group names. | 5 |
2025©
tesweb SA
