CPE Details
Alerte pour un CPE
Stay informed of any changes for a specific CPE.
CPE Name: cpe:2.3:o:cisco:ios_xe:17.1.1:*:*:*:*:*:*:*
Informations
Vendor
ciscoProduct
ios_xeVersion
17.1.1Related CVE
| CVE ID | Published | Description | Score | Severity |
|---|---|---|---|---|
16h29 +00:00 |
A vulnerability in Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the control plane of an affected device. This vulnerability is due to improper handling of frames with VLAN tag information. An attacker could exploit this vulnerability by sending crafted frames to an affected device. A successful exploit could allow the attacker to render the control plane of the affected device unresponsive. The device would not be accessible through the console or CLI, and it would not respond to ping requests, SNMP requests, or requests from other control plane protocols. Traffic that is traversing the device through the data plane is not affected. A reload of the device is required to restore control plane services. | 4.3 |
Medium |
|
16h29 +00:00 |
A vulnerability in the web UI feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system through the web UI. This vulnerability is due to incorrectly accepting configuration changes through the HTTP GET method. An attacker could exploit this vulnerability by persuading a currently authenticated administrator to follow a crafted link. A successful exploit could allow the attacker to change the configuration of the affected device. | 6.5 |
Medium |
|
16h28 +00:00 |
A vulnerability in the Central Web Authentication (CWA) feature of Cisco IOS XE Software for Wireless Controllers could allow an unauthenticated, adjacent attacker to bypass the pre-authentication access control list (ACL), which could allow access to network resources before user authentication. This vulnerability is due to a logic error when activating the pre-authentication ACL that is received from the authentication, authorization, and accounting (AAA) server. An attacker could exploit this vulnerability by connecting to a wireless network that is configured for CWA and sending traffic through an affected device that should be denied by the configured ACL before user authentication. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device before the user authentication is completed, allowing the attacker to access trusted networks that the device might be protecting. | 9.3 |
Critical |
|
16h27 +00:00 |
A vulnerability in the DHCP Snooping feature of Cisco IOS XE Software on Software-Defined Access (SD-Access) fabric edge nodes could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition that requires a manual reload to recover. This vulnerability is due to improper handling of IPv4 DHCP packets. An attacker could exploit this vulnerability by sending certain IPv4 DHCP packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition that requires a manual reload to recover. | 8.6 |
High |
|
16h26 +00:00 |
A vulnerability in the HTTP Server feature of Cisco IOS XE Software when the Telephony Service feature is enabled could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a null pointer dereference when accessing specific URLs. An attacker could exploit this vulnerability by sending crafted HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, causing a DoS condition on the affected device. | 8.6 |
High |
|
16h26 +00:00 |
A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. | 8.6 |
High |
|
16h18 +00:00 |
A vulnerability in the process that classifies traffic that is going to the Unified Threat Defense (UTD) component of Cisco IOS XE Software in controller mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because UTD improperly handles certain packets as those packets egress an SD-WAN IPsec tunnel. An attacker could exploit this vulnerability by sending crafted traffic through an SD-WAN IPsec tunnel that is configured on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: SD-WAN tunnels that are configured with Generic Routing Encapsulation (GRE) are not affected by this vulnerability. | 8.6 |
High |
|
22h00 +00:00 |
The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. | 7.5 |
High |
|
16h14 +00:00 |
A vulnerability in the on-device application development workflow feature for the Cisco IOx application hosting infrastructure in Cisco IOS XE Software could allow an authenticated, remote attacker to access the underlying operating system as the root user. This vulnerability exists because Docker containers with the privileged runtime option are not blocked when they are in application development mode. An attacker could exploit this vulnerability by using the Docker CLI to access an affected device. The application development workflow is meant to be used only on development systems and not in production systems. | 8.8 |
High |
|
17h23 +00:00 |
A vulnerability in the Cisco Group Encrypted Transport VPN (GET VPN) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker who has administrative control of either a group member or a key server to execute arbitrary code on an affected device or cause the device to crash. This vulnerability is due to insufficient validation of attributes in the Group Domain of Interpretation (GDOI) and G-IKEv2 protocols of the GET VPN feature. An attacker could exploit this vulnerability by either compromising an installed key server or modifying the configuration of a group member to point to a key server that is controlled by the attacker. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a denial of service (DoS) condition. For more information, see the Details ["#details"] section of this advisory. | 6.6 |
Medium |
|
17h22 +00:00 |
A vulnerability in the Authentication, Authorization, and Accounting (AAA) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to bypass command authorization and copy files to or from the file system of an affected device using the Secure Copy Protocol (SCP). This vulnerability is due to incorrect processing of SCP commands in AAA command authorization checks. An attacker with valid credentials and level 15 privileges could exploit this vulnerability by using SCP to connect to an affected device from an external machine. A successful exploit could allow the attacker to obtain or change the configuration of the affected device and put files on or retrieve files from the affected device. | 9.1 |
Critical |
|
17h21 +00:00 |
A vulnerability in the Layer 2 Tunneling Protocol (L2TP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain L2TP packets. An attacker could exploit this vulnerability by sending crafted L2TP packets to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. | 8.6 |
High |
|
17h19 +00:00 |
A vulnerability in the Multicast Leaf Recycle Elimination (mLRE) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect handling of certain IPv6 multicast packets when they are fanned out more than seven times on an affected device. An attacker could exploit this vulnerability by sending a specific IPv6 multicast or IPv6 multicast VPN (MVPNv6) packet through the affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition. | 8.6 |
High |
|
23h00 +00:00 |
A vulnerability in the implementation of the IPv4 Virtual Fragmentation Reassembly (VFR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper reassembly of large packets that occurs when VFR is enabled on either a tunnel interface or on a physical interface that is configured with a maximum transmission unit (MTU) greater than 4,615 bytes. An attacker could exploit this vulnerability by sending fragmented packets through a VFR-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | 8.6 |
High |
|
23h00 +00:00 |
A vulnerability in the management CLI of Cisco access point (AP) software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to cause an affected device to reload spontaneously, resulting in a DoS condition. | 6.5 |
Medium |
|
23h00 +00:00 |
A vulnerability in the HTTP-based client profiling feature of Cisco IOS XE Software for Wireless LAN Controllers (WLCs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of received traffic. An attacker could exploit this vulnerability by sending crafted traffic through a wireless access point. A successful exploit could allow the attacker to cause CPU utilization to increase, which could result in a DoS condition on an affected device and could cause new wireless client associations to fail. Once the offending traffic stops, the affected system will return to an operational state and new client associations will succeed. | 7.4 |
High |
|
23h00 +00:00 |
A vulnerability in the IPv6 DHCP version 6 (DHCPv6) relay and server features of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to insufficient validation of data boundaries. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly. | 8.6 |
High |
|
23h00 +00:00 |
A vulnerability in Cisco IOS XE Software for Cisco Catalyst 9300 Series Switches could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust. This vulnerability is due to errors that occur when retrieving the public release key that is used for image signature verification. An attacker could exploit this vulnerability by modifying specific variables in the Serial Peripheral Interface (SPI) flash memory of an affected device. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Note: In Cisco IOS XE Software releases 16.11.1 and later, the complexity of an attack using this vulnerability is high. However, an attacker with level-15 privileges could easily downgrade the Cisco IOS XE Software on a device to a release that would lower the attack complexity. | 6.8 |
Medium |
|
23h00 +00:00 |
A vulnerability in Cisco access points (AP) software could allow an authenticated, local attacker to inject arbitrary commands and execute them with root privileges. This vulnerability is due to improper input validation of commands that are issued from a wireless controller to an AP. An attacker with Administrator access to the CLI of the controller could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to gain full root access on the AP. | 6.7 |
Medium |
|
23h00 +00:00 |
A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system. | 8.8 |
High |
|
14h21 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 7.2 |
High |
|
14h21 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 5.5 |
Medium |
|
14h21 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 5.5 |
Medium |
|
14h21 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 7.2 |
High |
|
14h21 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 5.5 |
Medium |
|
14h21 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 5.5 |
Medium |
|
14h20 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 6.7 |
Medium |
|
14h16 +00:00 |
A vulnerability in the IPSec decryption routine of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to buffer exhaustion that occurs while traffic on a configured IPsec tunnel is being processed. An attacker could exploit this vulnerability by sending traffic to an affected device that has a maximum transmission unit (MTU) of 1800 bytes or greater. A successful exploit could allow the attacker to cause the device to reload. To exploit this vulnerability, the attacker may need access to the trusted network where the affected device is in order to send specific packets to be processed by the device. All network devices between the attacker and the affected device must support an MTU of 1800 bytes or greater. This access requirement could limit the possibility of a successful exploit. | 7.7 |
High |
|
14h16 +00:00 |
A vulnerability in the CLI of Cisco IOS XE Software for Cisco Catalyst 9000 Family Switches and Cisco Catalyst 9000 Family Wireless Controllers could allow an authenticated, local attacker to elevate privileges to level 15 on an affected device. This vulnerability is due to insufficient validation of user privileges after the user executes certain CLI commands. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands with level 15 privileges on the affected device. | 7.8 |
High |
|
14h16 +00:00 |
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to inadequate input validation of incoming CAPWAP packets encapsulating multicast DNS (mDNS) queries. An attacker could exploit this vulnerability by connecting to a wireless network and sending a crafted mDNS query, which would flow through and be processed by the wireless controller. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. | 8.6 |
High |
|
14h16 +00:00 |
A vulnerability in the Application Visibility and Control (AVC-FNF) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient packet verification for traffic inspected by the AVC feature. An attacker could exploit this vulnerability by sending crafted packets from the wired network to a wireless client, resulting in the crafted packets being processed by the wireless controller. A successful exploit could allow the attacker to cause a crash and reload of the affected device, resulting in a DoS condition. | 8.6 |
High |
|
14h16 +00:00 |
A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. This vulnerability is due to a lack of input validation of the information used to generate an SNMP trap related to a wireless client connection event. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | 7.4 |
High |
|
14h16 +00:00 |
A vulnerability in the NETCONF over SSH feature of Cisco IOS XE Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to insufficient resource management. An attacker could exploit this vulnerability by initiating a large number of NETCONF over SSH connections. A successful exploit could allow the attacker to exhaust resources, causing the device to reload and resulting in a DoS condition on an affected device. | 7.7 |
High |
|
14h16 +00:00 |
A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges. | 7.2 |
High |
|
14h15 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 7.2 |
High |
|
14h15 +00:00 |
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 7.2 |
High |
|
02h31 +00:00 |
A vulnerability in the Layer 2 punt code of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a queue wedge on an interface that receives specific Layer 2 frames, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of certain Layer 2 frames. An attacker could exploit this vulnerability by sending specific Layer 2 frames on the segment the router is connected to. A successful exploit could allow the attacker to cause a queue wedge on the interface, resulting in a DoS condition. | 7.4 |
High |
|
02h31 +00:00 |
A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition. | 7.7 |
High |
|
02h30 +00:00 |
A vulnerability in the authentication, authorization, and accounting (AAA) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass NETCONF or RESTCONF authentication and do either of the following: Install, manipulate, or delete the configuration of an affected device Cause memory corruption that results in a denial of service (DoS) on an affected device This vulnerability is due to an uninitialized variable. An attacker could exploit this vulnerability by sending a series of NETCONF or RESTCONF requests to an affected device. A successful exploit could allow the attacker to use NETCONF or RESTCONF to install, manipulate, or delete the configuration of a network device or to corrupt memory on the device, resulting a DoS. | 9.8 |
Critical |
|
02h30 +00:00 |
A vulnerability in the H.323 application level gateway (ALG) used by the Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass the ALG. This vulnerability is due to insufficient data validation of traffic that is traversing the ALG. An attacker could exploit this vulnerability by sending crafted traffic to a targeted device. A successful exploit could allow the attacker to bypass the ALG and open connections that should not be allowed to a remote device located behind the ALG. Note: This vulnerability has been publicly discussed as NAT Slipstreaming. | 4.7 |
Medium |
|
02h30 +00:00 |
A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | 8.6 |
High |
|
02h27 +00:00 |
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition. | 10 |
Critical |
|
02h26 +00:00 |
A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition. | 7.4 |
High |
|
02h26 +00:00 |
A vulnerability in the CLI of Cisco IOS XE SD-WAN Software and Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input in the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system. An attacker would need valid user credentials to exploit this vulnerability. | 6.7 |
Medium |
|
02h26 +00:00 |
A vulnerability in the Voice Telephony Service Provider (VTSP) service of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass configured destination patterns and dial arbitrary numbers. This vulnerability is due to insufficient validation of dial strings at Foreign Exchange Office (FXO) interfaces. An attacker could exploit this vulnerability by sending a malformed dial string to an affected device via either the ISDN protocol or SIP. A successful exploit could allow the attacker to conduct toll fraud, resulting in unexpected financial impact to affected customers. | 5.3 |
Medium |
|
02h25 +00:00 |
A vulnerability in the TrustSec CLI parser of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to an improper interaction between the web UI and the CLI parser. An attacker could exploit this vulnerability by requesting a particular CLI command to be run through the web UI. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. | 7.7 |
High |
|
02h25 +00:00 |
A vulnerability in the access control list (ACL) programming of Cisco ASR 900 and ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect programming of hardware when an ACL is configured using a method other than the configuration CLI. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. | 5.8 |
Medium |
|
02h25 +00:00 |
A vulnerability in the Zone-Based Policy Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent the Zone-Based Policy Firewall from correctly classifying traffic. This vulnerability exists because ICMP and UDP responder-to-initiator flows are not inspected when the Zone-Based Policy Firewall has either Unified Threat Defense (UTD) or Application Quality of Experience (AppQoE) configured. An attacker could exploit this vulnerability by attempting to send UDP or ICMP flows through the network. A successful exploit could allow the attacker to inject traffic through the Zone-Based Policy Firewall, resulting in traffic being dropped because it is incorrectly classified or in incorrect reporting figures being produced by high-speed logging (HSL). | 5.8 |
Medium |
|
02h25 +00:00 |
A vulnerability in the Rate Limiting Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization in the Cisco QuantumFlow Processor of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to mishandling of the rate limiting feature within the QuantumFlow Processor. An attacker could exploit this vulnerability by sending large amounts of traffic that would be subject to NAT and rate limiting through an affected device. A successful exploit could allow the attacker to cause the QuantumFlow Processor utilization to reach 100 percent on the affected device, resulting in a DoS condition. | 8.6 |
High |
|
02h25 +00:00 |
A vulnerability in the Simple Network Management Protocol (SNMP) punt handling function of Cisco cBR-8 Converged Broadband Routers could allow an authenticated, remote attacker to overload a device punt path, resulting in a denial of service (DoS) condition. This vulnerability is due to the punt path being overwhelmed by large quantities of SNMP requests. An attacker could exploit this vulnerability by sending a large number of SNMP requests to an affected device. A successful exploit could allow the attacker to overload the device punt path, resulting in a DoS condition. | 7.7 |
High |
|
17h31 +00:00 |
Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect handling of specific HTTP header parameters. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured file policy for HTTP packets and deliver a malicious payload. | 5.8 |
Medium |
|
20h20 +00:00 |
A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker with high privileges or an unauthenticated attacker with physical access to the device to open a debugging console. The vulnerability is due to insufficient command authorization restrictions. An attacker could exploit this vulnerability by running commands on the hardware platform to open a debugging console. A successful exploit could allow the attacker to access a debugging console. | 6.1 |
Medium |
|
20h16 +00:00 |
Multiple vulnerabilities in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to cause the web UI software to become unresponsive and consume vty line instances, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient error handling in the web UI. An attacker could exploit these vulnerabilities by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause the web UI software to become unresponsive and consume all available vty lines, preventing new session establishment and resulting in a DoS condition. Manual intervention would be required to regain web UI and vty session functionality. Note: These vulnerabilities do not affect the console connection. | 4.3 |
Medium |
|
20h16 +00:00 |
A vulnerability in CLI management in Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system as the root user. This vulnerability is due to the way the software handles concurrent CLI sessions. An attacker could exploit this vulnerability by authenticating to the device as an administrative user and executing a sequence of commands. A successful exploit could allow the attacker to obtain access to the underlying operating system as the root user. | 6.7 |
Medium |
|
20h16 +00:00 |
A vulnerability in the DECnet Phase IV and DECnet/OSI protocol processing of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation of DECnet traffic that is received by an affected device. An attacker could exploit this vulnerability by sending DECnet traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. | 7.4 |
High |
|
20h15 +00:00 |
Multiple vulnerabilities in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to cause the web UI software to become unresponsive and consume vty line instances, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient error handling in the web UI. An attacker could exploit these vulnerabilities by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause the web UI software to become unresponsive and consume all available vty lines, preventing new session establishment and resulting in a DoS condition. Manual intervention would be required to regain web UI and vty session functionality. Note: These vulnerabilities do not affect the console connection. | 4.3 |
Medium |
|
20h15 +00:00 |
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. | 8.6 |
High |
|
20h15 +00:00 |
A vulnerability in the web-based management interface of Cisco IOS XE Wireless Controller software for the Catalyst 9000 Family of switches could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against another user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by authenticating to the device as a high-privileged user, adding certain configurations with malicious code in one of its fields, and persuading another user to click on it. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or to access sensitive, browser-based information. | 4.8 |
Medium |
|
20h15 +00:00 |
Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory. | 6.7 |
Medium |
|
20h15 +00:00 |
Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory. | 6.7 |
Medium |
|
20h10 +00:00 |
A vulnerability in Address Resolution Protocol (ARP) management of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent an affected device from resolving ARP entries for legitimate hosts on the connected subnets. This vulnerability exists because ARP entries are mismanaged. An attacker could exploit this vulnerability by continuously sending traffic that results in incomplete ARP entries. A successful exploit could allow the attacker to cause ARP requests on the device to be unsuccessful for legitimate hosts, resulting in a denial of service (DoS) condition. | 5.8 |
Medium |
|
20h07 +00:00 |
A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges. | 6.7 |
Medium |
|
20h07 +00:00 |
Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges. | 6.7 |
Medium |
|
20h07 +00:00 |
A vulnerability in the Cisco IOx application hosting environment of multiple Cisco platforms could allow an authenticated, remote attacker to conduct directory traversal attacks and read and write files on the underlying operating system or host system. This vulnerability occurs because the device does not properly validate URIs in IOx API requests. An attacker could exploit this vulnerability by sending a crafted API request that contains directory traversal character sequences to an affected device. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system. | 6.5 |
Medium |
|
20h07 +00:00 |
A vulnerability in one of the diagnostic test CLI commands of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code on an affected device. To exploit this vulnerability, the attacker would need to have valid user credentials at privilege level 15. This vulnerability exists because the affected software permits modification of the run-time memory of an affected device under specific circumstances. An attacker could exploit this vulnerability by authenticating to the affected device and issuing a specific diagnostic test command at the CLI. A successful exploit could trigger a logic error in the code that was designed to restrict run-time memory modifications. The attacker could take advantage of this logic error to overwrite system memory locations and execute arbitrary code on the underlying Linux operating system (OS) of the affected device. | 6.7 |
Medium |
|
20h07 +00:00 |
A vulnerability in the dragonite debugger of Cisco IOS XE Software could allow an authenticated, local attacker to escalate from privilege level 15 to root privilege. The vulnerability is due to the presence of development testing and verification scripts that remained on the device. An attacker could exploit this vulnerability by bypassing the consent token mechanism with the residual scripts on the affected device. A successful exploit could allow the attacker to escalate from privilege level 15 to root privilege. | 6.7 |
Medium |
|
20h07 +00:00 |
A vulnerability in the CLI command permissions of Cisco IOS and Cisco IOS XE Software could allow an authenticated, local attacker to retrieve the password for Common Industrial Protocol (CIP) and then remotely configure the device as an administrative user. This vulnerability exists because incorrect permissions are associated with the show cip security CLI command. An attacker could exploit this vulnerability by issuing the command to retrieve the password for CIP on an affected device. A successful exploit could allow the attacker to reconfigure the device. | 7.8 |
High |
|
20h07 +00:00 |
A vulnerability in the boot logic of Cisco IOS XE Software could allow an authenticated, local attacker with level 15 privileges or an unauthenticated attacker with physical access to execute arbitrary code on the underlying Linux operating system of an affected device. This vulnerability is due to incorrect validations of specific function arguments that are passed to the boot script. An attacker could exploit this vulnerability by tampering with a specific file, which an affected device would process during the initial boot process. On systems that are protected by the Unified Extensible Firmware Interface (UEFI) secure boot feature, a successful exploit could allow the attacker to execute unsigned code at boot time and bypass the image verification check in the secure boot process of the affected device. | 6.8 |
Medium |
|
20h07 +00:00 |
A vulnerability in the web UI feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site WebSocket hijacking (CSWSH) attack and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient HTTP protections in the web UI on an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the web UI to follow a crafted link. A successful exploit could allow the attacker to corrupt memory on the affected device, forcing it to reload and causing a DoS condition. | 7.4 |
High |
|
20h06 +00:00 |
A vulnerability in the software image verification functionality of Cisco IOS XE Software for the Cisco Catalyst 9000 Family of switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. The vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated physical access to the device or obtain privileged access to the root shell on the device. | 6.8 |
Medium |
|
20h06 +00:00 |
A vulnerability in the DNS application layer gateway (ALG) functionality used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a logic error that occurs when an affected device inspects certain DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through an affected device that is performing NAT for DNS packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability can be exploited only by traffic that is sent through an affected device via IPv4 packets. The vulnerability cannot be exploited via IPv6 traffic. | 8.6 |
High |
|
20h06 +00:00 |
A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device. | 7.2 |
High |
|
20h06 +00:00 |
A vulnerability in the hardware initialization routines of Cisco IOS XE Software for Cisco 1100 Series Industrial Integrated Services Routers and Cisco ESR6300 Embedded Series Routers could allow an authenticated, local attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of parameters passed to a diagnostic script that is executed when the device boots up. An attacker could exploit this vulnerability by tampering with an executable file stored on a device. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need administrative level credentials (level 15) on the device. | 6.7 |
Medium |
|
20h06 +00:00 |
A vulnerability in a diagnostic command for the Plug-and-Play (PnP) subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to the level of an Administrator user (level 15) on an affected device. The vulnerability is due to insufficient protection of sensitive information. An attacker with low privileges could exploit this vulnerability by issuing the diagnostic CLI show pnp profile when a specific PnP listener is enabled on the device. A successful exploit could allow the attacker to obtain a privileged authentication token. This token can be used to send crafted PnP messages and execute privileged commands on the targeted system. | 7.8 |
High |
|
20h05 +00:00 |
A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to conduct path traversal attacks and obtain read access to sensitive files on an affected system. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to view arbitrary files on the affected system. | 4.4 |
Medium |
|
21h17 +00:00 |
Multiple Cisco products are affected by a vulnerability in the Snort application detection engine that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. The vulnerability is due to a flaw in the detection algorithm. An attacker could exploit this vulnerability by sending crafted packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. | 5.3 |
Medium |
|
21h16 +00:00 |
Multiple Cisco products are affected by a vulnerability with TCP Fast Open (TFO) when used in conjunction with the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect detection of the HTTP payload if it is contained at least partially within the TFO connection handshake. An attacker could exploit this vulnerability by sending crafted TFO packets with an HTTP payload through an affected device. A successful exploit could allow the attacker to bypass configured file policy for HTTP packets and deliver a malicious payload. | 5.8 |
Medium |
|
21h16 +00:00 |
Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect handling of an HTTP range header. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass configured file policy for HTTP packets and deliver a malicious payload. | 7.5 |
High |
|
18h01 +00:00 |
A vulnerability in the packet processing of Cisco IOS XE Software for Cisco 4461 Integrated Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IPv4 or IPv6 traffic to or through an affected device. An attacker could exploit this vulnerability by sending IP traffic to or through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | 8.6 |
High |
|
18h01 +00:00 |
A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device. | 6.8 |
Medium |
|
18h01 +00:00 |
A vulnerability in Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9800 Series Routers could allow an unauthenticated, adjacent attacker to send ICMPv6 traffic prior to the client being placed into RUN state. The vulnerability is due to an incomplete access control list (ACL) being applied prior to RUN state. An attacker could exploit this vulnerability by connecting to the associated service set identifier (SSID) and sending ICMPv6 traffic. A successful exploit could allow the attacker to send ICMPv6 traffic prior to RUN state. | 4.7 |
Medium |
|
18h01 +00:00 |
Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. | 8.8 |
High |
|
17h51 +00:00 |
A vulnerability in the IP Address Resolution Protocol (ARP) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers with a 20-Gbps Embedded Services Processor (ESP) installed could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service condition. The vulnerability is due to insufficient error handling when an affected device has reached platform limitations. An attacker could exploit this vulnerability by sending a malicious series of IP ARP messages to an affected device. A successful exploit could allow the attacker to exhaust system resources, which would eventually cause the affected device to reload. | 7.4 |
High |
|
17h51 +00:00 |
A vulnerability in the Umbrella Connector component of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches could allow an unauthenticated, remote attacker to trigger a reload, resulting in a denial of service condition on an affected device. The vulnerability is due to insufficient error handling when parsing DNS requests. An attacker could exploit this vulnerability by sending a series of malicious DNS requests to an Umbrella Connector client interface of an affected device. A successful exploit could allow the attacker to cause a crash of the iosd process, which triggers a reload of the affected device. | 8.6 |
High |
|
20h40 +00:00 |
A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges. | 7.8 |
High |
|
20h16 +00:00 |
A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to write values to the underlying memory of an affected device. The vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the CLI. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to modify the configuration of the device to cause it to be non-secure and abnormally functioning. | 5.5 |
Medium |
|
20h05 +00:00 |
Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory. | 8.8 |
High |
|
00h25 +00:00 |
A vulnerability in the Hot Standby Router Protocol (HSRP) subsystem of Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to receive potentially sensitive information from an affected device. The vulnerability is due to insufficient memory initialization. An attacker could exploit this vulnerability by receiving HSRPv2 traffic from an adjacent HSRP member. A successful exploit could allow the attacker to receive potentially sensitive information from the adjacent device. | 4.3 |
Medium |
|
14h00 +00:00 |
A vulnerability in the VLAN Trunking Protocol (VTP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to corrupt the internal VTP database on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to a logic error in how the affected software handles a subset of VTP packets. An attacker could exploit this vulnerability by sending VTP packets in a sequence that triggers a timeout in the VTP message processing code of the affected software. A successful exploit could allow the attacker to impact the ability to create, modify, or delete VLANs and cause a DoS condition. There are workarounds that address this vulnerability. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS Software or Cisco IOS XE Software, are operating in VTP client mode or VTP server mode, and do not have a VTP domain name configured. The default configuration for Cisco devices that are running Cisco IOS Software or Cisco IOS XE Software and support VTP is to operate in VTP server mode with no domain name configured. | 6.5 |
Medium |
2025©
tesweb SA
