CPE Details
Alerte pour un CPE
Stay informed of any changes for a specific CPE.
CPE Name: cpe:2.3:a:digium:asterisk:11.1.0:rc1:*:*:*:*:*:*
Informations
Vendor
digiumProduct
asteriskVersion
11.1.0Update
rc1Related CVE
| CVE ID | Published | Description | Score | Severity |
|---|---|---|---|---|
| Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk prior to versions 18.20.1, 20.5.1, and 21.0.1; as well as certified-asterisk prior to 18.9-cert6; Asterisk is susceptible to a DoS due to a race condition in the hello handshake phase of the DTLS protocol when handling DTLS-SRTP for media setup. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable Asterisk servers for calls that rely on DTLS-SRTP. Commit d7d7764cb07c8a1872804321302ef93bf62cba05 contains a fix, which is part of versions 18.20.1, 20.5.1, 21.0.1, amd 18.9-cert6. | 7.5 |
High |
||
| Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk versions 18.20.0 and prior, 20.5.0 and prior, and 21.0.0; as well as ceritifed-asterisk 18.9-cert5 and prior, the 'update' functionality of the PJSIP_HEADER dialplan function can exceed the available buffer space for storing the new value of a header. By doing so this can overwrite memory or cause a crash. This is not externally exploitable, unless dialplan is explicitly written to update a header based on data from an outside source. If the 'update' functionality is not used the vulnerability does not occur. A patch is available at commit a1ca0268254374b515fa5992f01340f7717113fa. | 8.2 |
High |
||
| Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk prior to versions 18.20.1, 20.5.1, and 21.0.1, as well as certified-asterisk prior to 18.9-cert6, it is possible to read any arbitrary file even when the `live_dangerously` is not enabled. This allows arbitrary files to be read. Asterisk versions 18.20.1, 20.5.1, and 21.0.1, as well as certified-asterisk prior to 18.9-cert6, contain a fix for this issue. | 7.5 |
High |
||
| An issue was discovered in res_pjsip_diversion.c in Sangoma Asterisk before 13.38.0, 14.x through 16.x before 16.15.0, 17.x before 17.9.0, and 18.x before 18.1.0. A crash can occur when a SIP message is received with a History-Info header that contains a tel-uri, or when a SIP 181 response is received that contains a tel-uri in the Diversion header. | 6.5 |
Medium |
||
| A Buffer Overflow issue was discovered in Asterisk through 13.19.1, 14.x through 14.7.5, and 15.x through 15.2.1, and Certified Asterisk through 13.18-cert2. When processing a SUBSCRIBE request, the res_pjsip_pubsub module stores the accepted formats present in the Accept headers of the request. This code did not limit the number of headers it processed, despite having a fixed limit of 32. If more than 32 Accept headers were present, the code would write outside of its memory and cause a crash. | 7.5 |
High |
||
| An issue was discovered in chan_skinny.c in Asterisk Open Source 13.18.2 and older, 14.7.2 and older, and 15.1.2 and older, and Certified Asterisk 13.13-cert7 and older. If the chan_skinny (aka SCCP protocol) channel driver is flooded with certain requests, it can cause the asterisk process to use excessive amounts of virtual memory, eventually causing asterisk to stop processing requests of any kind. | 7.5 |
High |
||
| In Asterisk 11.x before 11.25.3, 13.x before 13.17.2, and 14.x before 14.6.2 and Certified Asterisk 11.x before 11.6-cert18 and 13.x before 13.13-cert6, insufficient RTCP packet validation could allow reading stale buffer contents and when combined with the "nat" and "symmetric_rtp" options allow redirecting where Asterisk sends the next RTCP report. | 7.5 |
High |
||
| In res/res_rtp_asterisk.c in Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized data disclosure (media takeover in the RTP stack) is possible with careful timing by an attacker. The "strictrtp" option in rtp.conf enables a feature of the RTP stack that learns the source address of media for a session and drops any packets that do not originate from the expected address. This option is enabled by default in Asterisk 11 and above. The "nat" and "rtp_symmetric" options (for chan_sip and chan_pjsip, respectively) enable symmetric RTP support in the RTP stack. This uses the source address of incoming media as the target address of any sent media. This option is not enabled by default, but is commonly enabled to handle devices behind NAT. A change was made to the strict RTP support in the RTP stack to better tolerate late media when a reinvite occurs. When combined with the symmetric RTP support, this introduced an avenue where media could be hijacked. Instead of only learning a new address when expected, the new code allowed a new source address to be learned at all times. If a flood of RTP traffic was received, the strict RTP support would allow the new address to provide media, and (with symmetric RTP enabled) outgoing traffic would be sent to this new address, allowing the media to be hijacked. Provided the attacker continued to send traffic, they would continue to receive traffic as well. | 7.5 |
High |
||
| In Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized command execution is possible. The app_minivm module has an "externnotify" program configuration option that is executed by the MinivmNotify dialplan application. The application uses the caller-id name and number as part of a built string passed to the OS shell for interpretation and execution. Since the caller-id name and number can come from an untrusted source, a crafted caller-id name or number allows an arbitrary shell command injection. | 9.8 |
Critical |
||
| chain_sip in Asterisk Open Source 11.x before 11.23.1 and 13.x 13.11.1 and Certified Asterisk 11.6 before 11.6-cert15 and 13.8 before 13.8-cert3 allows remote attackers to cause a denial of service (port exhaustion). | 7.5 |
High |
||
| An issue was discovered in Asterisk Open Source 11.x before 11.25.1, 13.x before 13.13.1, and 14.x before 14.2.1 and Certified Asterisk 11.x before 11.6-cert16 and 13.x before 13.8-cert4. The chan_sip channel driver has a liberal definition for whitespace when attempting to strip the content between a SIP header name and a colon character. Rather than following RFC 3261 and stripping only spaces and horizontal tabs, Asterisk treats any non-printable ASCII character as if it were whitespace. This means that headers such as Contact\x01: will be seen as a valid Contact header. This mostly does not pose a problem until Asterisk is placed in tandem with an authenticating SIP proxy. In such a case, a crafty combination of valid and invalid To headers can cause a proxy to allow an INVITE request into Asterisk without authentication since it believes the request is an in-dialog request. However, because of the bug described above, the request will look like an out-of-dialog request to Asterisk. Asterisk will then process the request as a new call. The result is that Asterisk can process calls from unvetted sources without any authentication. If you do not use a proxy for authentication, then this issue does not affect you. If your proxy is dialog-aware (meaning that the proxy keeps track of what dialogs are currently valid), then this issue does not affect you. If you use chan_pjsip instead of chan_sip, then this issue does not affect you. | 5.3 |
Medium |
||
| Asterisk Open Source 1.8.x, 11.x before 11.21.1, 12.x, and 13.x before 13.7.1 and Certified Asterisk 1.8.28, 11.6 before 11.6-cert12, and 13.1 before 13.1-cert3 allow remote authenticated users to cause a denial of service (uninitialized pointer dereference and crash) via a zero length error correcting redundancy packet for a UDPTL FAX packet that is lost. | 6.5 |
Medium |
||
| chan_sip in Asterisk Open Source 1.8.x, 11.x before 11.21.1, 12.x, and 13.x before 13.7.1 and Certified Asterisk 1.8.28, 11.6 before 11.6-cert12, and 13.1 before 13.1-cert3, when the timert1 sip.conf configuration is set to a value greater than 1245, allows remote attackers to cause a denial of service (file descriptor consumption) via vectors related to large retransmit timeout values. | 5.9 |
Medium |
||
| Asterisk Open Source 1.8 before 1.8.32.3, 11.x before 11.17.1, 12.x before 12.8.2, and 13.x before 13.3.2 and Certified Asterisk 1.8.28 before 1.8.28-cert5, 11.6 before 11.6-cert11, and 13.1 before 13.1-cert2, when registering a SIP TLS device, does not properly handle a null byte in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority. | 4.3 |
|||
| Double free vulnerability in the WebSocket Server (res_http_websocket module) in Asterisk Open Source 11.x before 11.14.2, 12.x before 12.7.2, and 13.x before 13.0.2 and Certified Asterisk 11.6 before 11.6-cert9 allows remote attackers to cause a denial of service (crash) by sending a zero length frame after a non-zero length frame. | 5 |
|||
| Asterisk Open Source 11.x before 11.12.1 and 12.x before 12.5.1 and Certified Asterisk 11.6 before 11.6-cert6, when using the res_fax_spandsp module, allows remote authenticated users to cause a denial of service (crash) via an out of call message, which is not properly handled in the ReceiveFax dialplan application. | 4 |
|||
| The (1) VoIP channel drivers, (2) DUNDi, and (3) Asterisk Manager Interface (AMI) in Asterisk Open Source 1.8.x before 1.8.32.1, 11.x before 11.14.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 1.8.28 before 1.8.28-cert3 and 11.6 before 11.6-cert8 allows remote attackers to bypass the ACL restrictions via a packet with a source IP that does not share the address family as the first ACL entry. | 5 |
|||
| ConfBridge in Asterisk 11.x before 11.14.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 11.6 before 11.6-cert8 allows remote authenticated users to (1) gain privileges via vectors related to an external protocol to the CONFBRIDGE dialplan function or (2) execute arbitrary system commands via a crafted ConfbridgeStartRecord AMI action. | 6.5 |
|||
| The DB dialplan function in Asterisk Open Source 1.8.x before 1.8.32, 11.x before 11.1.4.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 1.8 before 1.8.28-cert8 and 11.6 before 11.6-cert8 allows remote authenticated users to gain privileges via a call from an external protocol, as demonstrated by the AMI protocol. | 9 |
|||
| Asterisk Open Source 11.x before 11.10.1 and 12.x before 12.3.1 and Certified Asterisk 11.6 before 11.6-cert3 allows remote authenticated Manager users to execute arbitrary shell commands via a MixMonitor action. | 6.5 |
|||
| Asterisk Open Source 1.8.x before 1.8.28.1, 11.x before 11.10.1, and 12.x before 12.3.1 and Certified Asterisk 1.8.15 before 1.8.15-cert6 and 11.6 before 11.6-cert3 allows remote attackers to cause a denial of service (connection consumption) via a large number of (1) inactive or (2) incomplete HTTP connections. | 5 |
|||
| The PJSIP Channel Driver in Asterisk Open Source before 12.3.1 allows remote attackers to cause a denial of service (deadlock) by terminating a subscription request before it is complete, which triggers a SIP transaction timeout. | 4.3 |
|||
| Buffer overflow in the unpacksms16 function in apps/app_sms.c in Asterisk Open Source 1.8.x before 1.8.24.1, 10.x before 10.12.4, and 11.x before 11.6.1; Asterisk with Digiumphones 10.x-digiumphones before 10.12.4-digiumphones; and Certified Asterisk 1.8.x before 1.8.15-cert4 and 11.x before 11.2-cert3 allows remote attackers to cause a denial of service (daemon crash) via a 16-bit SMS message with an odd number of bytes, which triggers an infinite loop. | 5 |
|||
| The SIP channel driver (channels/chan_sip.c) in Asterisk Open Source 1.8.17.x through 1.8.22.x, 1.8.23.x before 1.8.23.1, and 11.x before 11.5.1 and Certified Asterisk 1.8.15 before 1.8.15-cert3 and 11.2 before 11.2-cert2 allows remote attackers to cause a denial of service (NULL pointer dereference, segmentation fault, and daemon crash) via an ACK with SDP to a previously terminated channel. NOTE: some of these details are obtained from third party information. | 5 |
|||
| The SIP channel driver (channels/chan_sip.c) in Asterisk Open Source 1.8.x before 1.8.23.1, 10.x before 10.12.3, and 11.x before 11.5.1; Certified Asterisk 1.8.15 before 1.8.15-cert3 and 11.2 before 11.2-cert2; and Asterisk Digiumphones 10.x-digiumphones before 10.12.3-digiumphones allows remote attackers to cause a denial of service (NULL pointer dereference, segmentation fault, and daemon crash) via an invalid SDP that defines a media description before the connection description in a SIP request. | 5 |
|||
| Asterisk Open Source 1.8.x before 1.8.19.1, 10.x before 10.11.1, and 11.x before 11.1.2; Certified Asterisk 1.8.11 before 1.8.11-cert10; and Asterisk Digiumphones 10.x-digiumphones before 10.11.1-digiumphones, when anonymous calls are enabled, allow remote attackers to cause a denial of service (resource consumption) by making anonymous calls from multiple sources and consequently adding many entries to the device state cache. | 4.3 |
|||
| Multiple stack consumption vulnerabilities in Asterisk Open Source 1.8.x before 1.8.19.1, 10.x before 10.11.1, and 11.x before 11.1.2; Certified Asterisk 1.8.11 before 1.8.11-cert10; and Asterisk Digiumphones 10.x-digiumphones before 10.11.1-digiumphones allow remote attackers to cause a denial of service (daemon crash) via TCP data using the (1) SIP, (2) HTTP, or (3) XMPP protocol. | 5 |
2025©
tesweb SA
