CVE ID | Published | Description | Score | Severity |
---|---|---|---|---|
Buffer overflow in the HTTP server for Cisco IOS 12.2 and earlier allows remote attackers to execute arbitrary code via an extremely long (2GB) HTTP GET request. | 7.5 |
|||
The NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload or hang) via malformed NetMeeting Directory (aka Internet Locator Service or ILS) LDAP traffic, aka Bug ID CSCtd10712. | 7.8 |
|||
The ipv6 component in Cisco IOS before 15.1(4)M1.3 allows remote attackers to conduct fingerprinting attacks and obtain potentially sensitive information about the presence of the IOS operating system via an ICMPv6 Echo Request packet containing a Hop-by-Hop (HBH) extension header (EH) with a 0x0c01050c value in the PadN option data, aka Bug ID CSCtq02219. | 5 |
|||
Cisco IOS 12.4(24)MDB9 and earlier on Content Services Gateway (CSG) devices does not properly implement the "parse error drop" feature, which allows remote attackers to bypass intended access restrictions via a crafted series of packets, aka Bug ID CSCug90143. | 6.4 |
|||
The SSL VPN implementation in Cisco IOS 15.3(1)T2 and earlier allows remote authenticated users to cause a denial of service (interface queue wedge) via crafted DTLS packets in an SSL session, aka Bug IDs CSCuh97409 and CSCud90568. | 6.8 |
|||
Integer overflow in Cisco IOS allows remote attackers to execute arbitrary code via unspecified vectors. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes. | 9.3 |
|||
Unspecified vulnerability in Cisco IOS allows remote attackers to obtain the IOS version via unspecified vectors involving a "common network service", aka PSIRT-1255024833. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes. | 5 |
|||
Off-by-one error in Cisco IOS allows remote attackers to execute arbitrary code via unspecified vectors that trigger a heap-based buffer overflow. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes. | 7.1 |
|||
The Temporal Key Integrity Protocol (TKIP) implementation in unspecified Cisco products and other vendors' products, as used in WPA and WPA2 on Wi-Fi networks, has insufficient countermeasures against certain crafted and replayed packets, which makes it easier for remote attackers to decrypt packets from an access point (AP) to a client and spoof packets from an AP to a client, and conduct ARP poisoning attacks or other attacks, as demonstrated by tkiptun-ng. | 6.8 |
|||
Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. | 7.5 |
HIGH |
||
A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a reload of the device. | 6.8 |
MEDIUM |
||
A memory leak vulnerability exists in Cisco IOS before 15.2(1)T due to a memory leak in the HTTP PROXY Server process (aka CSCtu52820), when configured with Cisco ISR Web Security with Cisco ScanSafe and User Authenticaiton NTLM configured. | 7.5 |
HIGH |
||
A vulnerability in the web UI of Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. The vulnerability is due to insufficient CSRF protections for the web UI on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the targeted user. If the user has administrative privileges, the attacker could alter the configuration, execute commands, or reload an affected device. | 8.8 |
HIGH |
||
A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload. | 7.5 |
HIGH |
||
A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform. | 6.7 |
MEDIUM |
||
Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487. | 8.8 |
HIGH |
||
A vulnerability in the Cisco IOS Software and Cisco IOS XE Software function that restores encapsulated option 82 information in DHCP Version 4 (DHCPv4) packets could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a Relay Reply denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of encapsulated option 82 information that it receives in DHCPOFFER messages from DHCPv4 servers. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device, which the device would then forward to a DHCPv4 server. When the affected software processes the option 82 information that is encapsulated in the response from the server, an error could occur. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg62754. | 8.6 |
HIGH |
||
A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuh91645. | 8.6 |
HIGH |
||
Format String vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCvd73664. | 8 |
HIGH |
||
A vulnerability in conditional, verbose debug logging for the IPsec feature of Cisco IOS XE Software could allow an authenticated, local attacker to display sensitive IPsec information in the system log file. The vulnerability is due to incorrect implementation of IPsec conditional, verbose debug logging that causes sensitive information to be written to the log file. This information should be restricted. An attacker who has valid administrative credentials could exploit this vulnerability by authenticating to the device and enabling conditional, verbose debug logging for IPsec and viewing the log file. An exploit could allow the attacker to access sensitive information related to the IPsec configuration. Cisco Bug IDs: CSCvf12081. | 4.4 |
MEDIUM |
||
Cisco IOS before 12.2(33)SXI allows local users to cause a denial of service (device reboot). | 5.5 |
MEDIUM |
||
Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot). | 6.5 |
MEDIUM |
||
Cisco IOS before 15.2(4)S6 does not initialize an unspecified variable, which might allow remote authenticated users to cause a denial of service (CPU consumption, watchdog timeout, crash) by walking specific SNMP objects. | 6.5 |
MEDIUM |
||
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve57697. | 8.8 |
HIGH |
||
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60402. | 8.8 |
HIGH |
||
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve89865, CSCsy56638. | 8.8 |
HIGH |
||
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66540. | 8.8 |
HIGH |
||
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66601. | 8.8 |
HIGH |
||
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve54313. | 8.8 |
HIGH |
||
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60376, CSCve78027. | 8.8 |
HIGH |
||
A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. | 7.5 |
HIGH |
||
The AAA service in Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.1 through 3.18 and 16.2 allows remote attackers to cause a denial of service (device reload) via a failed SSH connection attempt that is mishandled during generation of an error-log message, aka Bug ID CSCuy87667. | 7.5 |
HIGH |
||
The Zone-Based Firewall (ZBFW) functionality in Cisco IOS, possibly 15.4 and earlier, and IOS XE, possibly 3.13 and earlier, mishandles zone checking for existing sessions, which allows remote attackers to bypass intended resource-access restrictions via spoofed traffic that matches one of these sessions, aka Bug IDs CSCun94946 and CSCun96847. | 6.5 |
MEDIUM |
||
The Data in Motion (DMo) application in Cisco IOS 15.6(1)T and IOS XE, when the IOx feature set is enabled, allows remote attackers to cause a denial of service via a crafted packet, aka Bug IDs CSCuy82904, CSCuy82909, and CSCuy82912. | 5.9 |
MEDIUM |
||
Race condition in the Common Classification Engine (CCE) in the Measurement, Aggregation, and Correlation Engine (MACE) implementation in Cisco IOS 15.4(2)T3 and earlier allows remote attackers to cause a denial of service (device reload) via crafted network traffic that triggers improper handling of the timing of process switching and Cisco Express Forwarding (CEF) switching, aka Bug ID CSCuj96752. | 7.1 |
|||
The Zone-Based Firewall implementation in Cisco IOS 15.4(2)T3 and earlier allows remote attackers to cause a denial of service (device reload) via crafted network traffic that triggers incorrect kernel-timer handling, aka Bug ID CSCuh25672. | 7.8 |
|||
Race condition in the Measurement, Aggregation, and Correlation Engine (MACE) implementation in Cisco IOS 15.4(2)T3 and earlier allows remote attackers to cause a denial of service (device reload) via crafted network traffic that triggers improper handling of the timing of process switching and Cisco Express Forwarding (CEF) switching, aka Bug ID CSCul48736. | 7.1 |
|||
Race condition in the object-group ACL feature in Cisco IOS 15.5(2)T and earlier allows remote attackers to bypass intended access restrictions via crafted network traffic that triggers improper handling of the timing of process switching and Cisco Express Forwarding (CEF) switching, aka Bug ID CSCun21071. | 4.3 |
|||
The Network-Based Application Recognition (NBAR) protocol implementation in Cisco IOS 15.3(100)M and earlier on Cisco 2900 Integrated Services Router (aka Cisco Internet Router) devices allows remote attackers to cause a denial of service (NBAR process hang) via IPv4 packets, aka Bug ID CSCuo73682. | 7.8 |
|||
The Ethernet Connectivity Fault Management (CFM) handling feature in Cisco IOS 12.2(33)SRE9a and earlier and IOS XE 3.13S and earlier allows remote attackers to cause a denial of service (device reload) via malformed CFM packets, aka Bug ID CSCuq93406. | 6.1 |
|||
The Locator/ID Separation Protocol (LISP) implementation in Cisco IOS 15.3(3)S and earlier and IOS XE does not properly validate parameters in ITR control messages, which allows remote attackers to cause a denial of service (CEF outage and packet drops) via malformed messages, aka Bug ID CSCun73782. | 4.3 |
|||
Cisco IOS before 15.3(2)S allows remote attackers to bypass interface ACL restrictions in opportunistic circumstances by sending IPv6 packets in an unspecified scenario in which expected packet drops do not occur for "a small percentage" of the packets, aka Bug ID CSCty73682. | 5 |
|||
Cisco IOS before 15.3(1)T on Cisco 2900 devices, when a VWIC2-2MFT-T1/E1 card is configured for TDM/HDLC mode, allows remote attackers to cause a denial of service (serial-interface outage) via certain Frame Relay traffic, aka Bug ID CSCub13317. | 4.3 |
|||
Cisco IOS before 15.3(2)T, when scansafe is enabled, allows remote attackers to cause a denial of service (latency) via SYN packets that are not accompanied by SYN-ACK packets from the Scan Safe Tower, aka Bug ID CSCub85451. | 4.3 |
|||
The ios-authproxy implementation in Cisco IOS before 15.1(1)SY3 allows remote attackers to cause a denial of service (webauth and HTTP service outage) via vectors that trigger incorrectly terminated HTTP sessions, aka Bug ID CSCtz99447. | 5 |
|||
Cisco IOS before 15.1(2)SY allows remote authenticated users to cause a denial of service (device crash) by establishing an SSH session from a client and then placing this client into a (1) slow or (2) idle state, aka Bug ID CSCto87436. | 6.3 |
|||
Cisco IOS before 15.1(1)SY1 allows remote authenticated users to cause a denial of service (device reload) by establishing a VPN session and then sending malformed IKEv2 packets, aka Bug ID CSCub39268. | 6.8 |
|||
The Flex-VPN load-balancing feature in the ipsec-ikev2 implementation in Cisco IOS before 15.1(1)SY3 does not require authentication, which allows remote attackers to trigger the forwarding of VPN traffic to an attacker-controlled destination, or the discarding of this traffic, by arranging for an arbitrary device to become a cluster member, aka Bug ID CSCub93641. | 6.4 |
|||
The ACL implementation in Cisco IOS before 15.1(1)SY on Catalyst 6500 and 7600 devices allows local users to cause a denial of service (device reload) via a "no object-group" command followed by an object-group command, aka Bug ID CSCts16133. | 4.6 |
|||
The BGP Router process in Cisco IOS before 12.2(50)SY1 allows remote attackers to cause a denial of service (memory consumption) via vectors involving BGP path attributes, aka Bug ID CSCsw63003. | 4.3 |
|||
Cisco IOS before 15.3(1)T, when media flow-around is not used, allows remote attackers to cause a denial of service (media loops and stack memory corruption) via VoIP traffic, aka Bug ID CSCub45809. | 5.4 |
|||
Unspecified vulnerability in Cisco IOS before 15.3(2)T on AS5400 devices allows remote authenticated users to cause a denial of service (spurious errors) via unknown vectors, aka Bug ID CSCub61009. | 6.8 |
|||
Cisco IOS Unified Border Element (CUBE) in Cisco IOS before 15.3(2)T allows remote authenticated users to cause a denial of service (input queue wedge) via a crafted series of RTCP packets, aka Bug ID CSCuc42518. | 4 |
|||
The IKE implementation in Cisco IOS 15.4(1)T and earlier and IOS XE allows remote attackers to cause a denial of service (security-association drop) via crafted Main Mode packets, aka Bug ID CSCun31021. | 5 |
|||
Cisco IOS 15.1(2)SY3 and earlier, when used with Supervisor Engine 2T (aka Sup2T) on Catalyst 6500 devices, allows remote attackers to cause a denial of service (device crash) via crafted multicast packets, aka Bug ID CSCuf60783. | 7.1 |
|||
The MLDP implementation in Cisco IOS 15.3(3)S and earlier on 7600 routers, when many VRFs are configured, allows remote attackers to cause a denial of service (chunk corruption and device reload) by establishing many multicast flows, aka Bug ID CSCue22345. | 5.4 |
|||
The provider-edge MPLS NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) via a malformed SIP packet to UDP port 5060, aka Bug ID CSCti98219. | 7.8 |
|||
The Neighbor Discovery (ND) protocol implementation in Cisco IOS on unspecified switches allows remote attackers to bypass the Router Advertisement Guarding functionality via a fragmented IPv6 packet in which the Router Advertisement (RA) message is contained in the second fragment, as demonstrated by (1) a packet in which the first fragment contains a long Destination Options extension header or (2) a packet in which the first fragment contains an ICMPv6 Echo Request message. | 5 |
|||
Cisco IOS before 15.0(1)XA does not properly handle IRC traffic during a specific time period after an initial reload, which allows remote attackers to cause a denial of service (device reload) via an attempted connection to a certain IRC server, related to a "corrupted magic value," aka Bug ID CSCso05336. | 7.8 |
|||
Memory leak in the gk_circuit_info_do_in_acf function in the H.323 implementation in Cisco IOS before 15.0(1)XA allows remote attackers to cause a denial of service (memory consumption) via a large number of calls over a long duration, as demonstrated by InterZone Clear Token (IZCT) test traffic, aka Bug ID CSCsz72535. | 5 |
|||
CallManager Express (CME) on Cisco IOS before 15.0(1)XA allows remote authenticated users to cause a denial of service (device crash) by using an extension mobility (EM) phone to interact with the menu for SNR number changes, aka Bug ID CSCta63555. | 6.8 |
|||
Memory leak in Cisco IOS before 15.0(1)XA5 might allow remote attackers to cause a denial of service (memory consumption) by sending a crafted SIP REGISTER message over UDP, aka Bug ID CSCtg41733. | 7.8 |
|||
Cisco IOS before 15.0(1)XA1, when certain TFTP debugging is enabled, allows remote attackers to cause a denial of service (device crash) via a TFTP copy over IPv6, aka Bug ID CSCtb28877. | 7.1 |
|||
Cisco IOS before 15.0(1)XA1 does not clear the public key cache upon a change to a certificate map, which allows remote authenticated users to bypass a certificate ban by connecting with a banned certificate that had previously been valid, aka Bug ID CSCta79031. | 4 |
|||
CallManager Express (CME) on Cisco IOS before 15.0(1)XA1 does not properly handle SIP TRUNK traffic that contains rate bursts and a "peculiar" request size, which allows remote attackers to cause a denial of service (memory consumption) by sending this traffic over a long duration, aka Bug ID CSCtb47950. | 7.8 |
|||
STCAPP (aka the SCCP telephony control application) on Cisco IOS before 15.0(1)XA1 does not properly handle multiple calls to a shared line, which allows remote attackers to cause a denial of service (port hang) by simultaneously ending two calls that were controlled by CallManager Express (CME), aka Bug ID CSCtd42552. | 5 |
|||
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS before 15.0(1)XA5 allows remote attackers to cause a denial of service (CPU consumption and device hang) by sending many Router Advertisement (RA) messages with different source addresses, as demonstrated by the flood_router6 program in the thc-ipv6 package, aka Bug ID CSCti33534. | 7.8 |
|||
Unspecified vulnerability in the VLAN Trunking Protocol (VTP) implementation on Cisco IOS and CatOS, when the VTP operating mode is not transparent, allows remote attackers to cause a denial of service (device reload or hang) via a crafted VTP packet sent to a switch interface configured as a trunk port. | 7.1 |
|||
The TCP implementation in (1) Linux, (2) platforms based on BSD Unix, (3) Microsoft Windows, (4) Cisco products, and probably other operating systems allows remote attackers to cause a denial of service (connection queue exhaustion) via multiple vectors that manipulate information in the TCP state table, as demonstrated by sockstress. | 7.1 |
|||
The virtual private dial-up network (VPDN) component in Cisco IOS before 12.3 allows remote attackers to cause a denial of service (resource exhaustion) via a series of PPTP sessions, related to the persistence of interface descriptor block (IDB) data structures after process termination, aka bug ID CSCdv59309. | 7.1 |
|||
Memory leak in the virtual private dial-up network (VPDN) component in Cisco IOS before 12.3 allows remote attackers to cause a denial of service (memory consumption) via a series of PPTP sessions, related to "dead memory" that remains allocated after process termination, aka bug ID CSCsj58566. | 7.1 |
|||
Cross-site scripting (XSS) vulnerability in Cisco IOS allows remote attackers to inject arbitrary web script or HTML, and execute IOS commands, via unspecified vectors, aka PSIRT-2022590358. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes. | 4.3 |
|||
Multiple stack-based buffer overflows in Command EXEC in Cisco IOS allow local users to gain privileges via unspecified vectors, aka (1) PSIRT-0474975756 and (2) PSIRT-0388256465. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes. | 6.9 |
|||
Unspecified vulnerability in Command EXEC in Cisco IOS allows local users to bypass command restrictions and obtain sensitive information via an unspecified "variation of an IOS command" involving "two different methods", aka CSCsk16129. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes. | 2.1 |
|||
Stack-based buffer overflow in the Line Printer Daemon (LPD) in Cisco IOS before 12.2(18)SXF11, 12.4(16a), and 12.4(2)T6 allow remote attackers to execute arbitrary code by setting a long hostname on the target system, then causing an error message to be printed, as demonstrated by a telnet session to the LPD from a source port other than 515. | 9.3 |
|||
The IOS FTP Server in Cisco IOS 11.3 through 12.4 allows remote authenticated users to cause a denial of service (IOS reload) via unspecified vectors involving transferring files (aka bug ID CSCse29244). | 6.3 |
|||
The Data-link Switching (DLSw) feature in Cisco IOS 11.0 through 12.4 allows remote attackers to cause a denial of service (device reload) via "an invalid value in a DLSw message... during the capabilities exchange." | 5 |
|||
Cisco IOS 12.2 through 12.4 before 20060920, as used by Cisco IAD2430, IAD2431, and IAD2432 Integrated Access Devices, the VG224 Analog Phone Gateway, and the MWR 1900 and 1941 Mobile Wireless Edge Routers, is incorrectly identified as supporting DOCSIS, which allows remote attackers to gain read-write access via a hard-coded cable-docsis community string and read or modify arbitrary SNMP variables. | 10 |
|||
Internet Key Exchange (IKE) version 1 protocol, as implemented on Cisco IOS, VPN 3000 Concentrators, and PIX firewalls, allows remote attackers to cause a denial of service (resource exhaustion) via a flood of IKE Phase-1 packets that exceed the session expiration rate. NOTE: it has been argued that this is due to a design weakness of the IKE version 1 protocol, in which case other vendors and implementations would also be affected. | 5 |
|||
Cross-site scripting (XSS) vulnerability in Cisco IOS Web Server for IOS 12.0(2a) allows remote attackers to inject arbitrary web script or HTML by (1) packets containing HTML that an administrator views via an HTTP interface to the contents of memory buffers, as demonstrated by the URI /level/15/exec/-/buffers/assigned/dump; or (2) sending the router Cisco Discovery Protocol (CDP) packets with HTML payload that an administrator views via the CDP status pages. NOTE: these vectors were originally reported as being associated with the dump and packet options in /level/15/exec/-/show/buffers. | 2.6 |
|||
Cisco IOS software 11.3 through 12.2 running on Cisco uBR7200 and uBR7100 series Universal Broadband Routers allows remote attackers to modify Data Over Cable Service Interface Specification (DOCSIS) settings via a DOCSIS file without a Message Integrity Check (MIC) signature, which is approved by the router. | 7.5 |
HIGH |
||
Cisco IOS 12.2(15) and earlier allows remote attackers to cause a denial of service (refused VTY (virtual terminal) connections), via a crafted TCP connection to the Telnet or reverse Telnet port. | 5.9 |
MEDIUM |
||
Cisco IOS 11.1(x) through 11.3(x) and 12.0(x) through 12.2(x), when configured for BGP routing, allows remote attackers to cause a denial of service (device reload) via malformed BGP (1) OPEN or (2) UPDATE messages. | 4.3 |
|||
Buffer overflow in Cisco TACACS+ tac_plus server allows remote attackers to cause a denial of service via a malformed packet with a long length field. | 5 |