CPE Details
Linux Kernel 6.11 Release Candidate 7
6.11
2024-10-03
17h29 +00:00
17h29 +00:00
2024-10-03
17h29 +00:00
17h29 +00:00
Alerte pour un CPE
Stay informed of any changes for a specific CPE.
CPE Name: cpe:2.3:o:linux:linux_kernel:6.11:rc7:*:*:*:*:*:*
Informations
Vendor
linuxProduct
linux_kernelVersion
6.11Update
rc7Related CVE
| CVE ID | Published | Description | Score | Severity |
|---|---|---|---|---|
13h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag: depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two. | 5.5 |
Medium |
|
13h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Revert "libfs: fix infinite directory reads for offset dir"
The current directory offset allocator (based on mtree_alloc_cyclic)
stores the next offset value to return in octx->next_offset. This
mechanism typically returns values that increase monotonically over
time. Eventually, though, the newly allocated offset value wraps
back to a low number (say, 2) which is smaller than other already-
allocated offset values.
Yu Kuai |
5.5 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Ensure job pointer is set to NULL after job completion After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished. | 5.5 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. | 5.5 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-uart-backlight: fix serdev race The dell_uart_bl_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. | 4.7 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/proc: fix softlockup in __read_vmcore (part 2) Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the number of softlockups in __read_vmcore at kdump time have gone down, but they still happen sometimes. In a memory constrained environment like the kdump image, a softlockup is not just a harmless message, but it can interfere with things like RCU freeing memory, causing the crashdump to get stuck. The second loop in __read_vmcore has a lot more opportunities for natural sleep points, like scheduling out while waiting for a data write to happen, but apparently that is not always enough. Add a cond_resched() to the second loop in __read_vmcore to (hopefully) get rid of the softlockups. | 5.5 |
Medium |
|
13h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: hrtimers: Handle CPU state correctly on hotplug Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to CPUHP_ONLINE: Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set to 1 throughout. However, during a CPU unplug operation, the tick and the clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online state, for instance CFS incorrectly assumes that the hrtick is already active, and the chance of the clockevent device to transition to oneshot mode is also lost forever for the CPU, unless it goes back to a lower state than CPUHP_HRTIMERS_PREPARE once. This round-trip reveals another issue; cpu_base.online is not set to 1 after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer(). Aside of that, the bulk of the per CPU state is not reset either, which means there are dangling pointers in the worst case. Address this by adding a corresponding startup() callback, which resets the stale per CPU state and sets the online flag. [ tglx: Make the new callback unconditionally available, remove the online modification in the prepare() callback and clear the remaining state in the starting callback instead of the prepare callback ] | 7.8 |
High |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix ets qdisc OOB Indexing
Haowei Yan |
7.8 |
High |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Ratelimit warning logs to prevent VM denial of service If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM. | 5.5 |
Medium |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following: if (newport > serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); break; } The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL: serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds. | 5.5 |
Medium |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vfio/platform: check the bounds of read/write syscalls count and offset are passed from user space and not checked, only offset is capped to 40 bits, which can be used to read/write out of bounds of the device. | 7.8 |
High |
|
15h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominator defaults to 1 [WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. (cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7) | 5.5 |
Medium |
|
11h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: fix serdev race The yt2_1380_fc_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. | 4.7 |
Medium |
|
11h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: Convert gpio_lock to raw spinlock irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) | 5.5 |
Medium |
|
11h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Don't enable interrupts in its_irq_set_vcpu_affinity() The following call-chain leads to enabling interrupts in a nested interrupt disabled section: irq_set_vcpu_affinity() irq_get_desc_lock() raw_spin_lock_irqsave() <--- Disable interrupts its_irq_set_vcpu_affinity() guard(raw_spinlock_irq) <--- Enables interrupts when leaving the guard() irq_put_desc_unlock() <--- Warns because interrupts are enabled This was broken in commit b97e8a2f7130, which replaced the original raw_spin_[un]lock() pair with guard(raw_spinlock_irq). Fix the issue by using guard(raw_spinlock). [ tglx: Massaged change log ] | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sk_select_reuseport() memory leak As pointed out in the original comment, lookup in sockmap can return a TCP ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb does not imply a non-refcounted socket. Drop sk's reference in both error paths. unreferenced object 0xffff888101911800 (size 2048): comm "test_progs", pid 44109, jiffies 4297131437 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 9336483b): __kmalloc_noprof+0x3bf/0x560 __reuseport_alloc+0x1d/0x40 reuseport_alloc+0xca/0x150 reuseport_attach_prog+0x87/0x140 sk_reuseport_attach_bpf+0xc8/0x100 sk_setsockopt+0x1181/0x1990 do_sock_setsockopt+0x12b/0x160 __sys_setsockopt+0x7b/0xc0 __x64_sys_setsockopt+0x1b/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: always recalculate features after XDP clearing, fix null-deref Recalculate features when XDP is detached. Before: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: off [requested on] After: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: on The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly. Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the: if (old_rx_rings != bp->hw_resc.resv_rx_rings && condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with: BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0 As we try to access a freed ring. The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: openvswitch: fix lockup on tx to unregistering netdev with carrier Commit in a fixes tag attempted to fix the issue in the following sequence of calls: do_output -> ovs_vport_send -> dev_queue_xmit -> __dev_queue_xmit -> netdev_core_pick_tx -> skb_tx_hash When device is unregistering, the 'dev->real_num_tx_queues' goes to zero and the 'while (unlikely(hash >= qcount))' loop inside the 'skb_tx_hash' becomes infinite, locking up the core forever. But unfortunately, checking just the carrier status is not enough to fix the issue, because some devices may still be in unregistering state while reporting carrier status OK. One example of such device is a net/dummy. It sets carrier ON on start, but it doesn't implement .ndo_stop to set the carrier off. And it makes sense, because dummy doesn't really have a carrier. Therefore, while this device is unregistering, it's still easy to hit the infinite loop in the skb_tx_hash() from the OVS datapath. There might be other drivers that do the same, but dummy by itself is important for the OVS ecosystem, because it is frequently used as a packet sink for tcpdump while debugging OVS deployments. And when the issue is hit, the only way to recover is to reboot. Fix that by also checking if the device is running. The running state is handled by the net core during unregistering, so it covers unregistering case better, and we don't really need to send packets to devices that are not running anyway. While only checking the running state might be enough, the carrier check is preserved. The running and the carrier states seem disjoined throughout the code and different drivers. And other core functions like __dev_direct_xmit() check both before attempting to transmit a packet. So, it seems safer to check both flags in OVS as well. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
pktgen: Avoid out-of-bounds access in get_imix_entries
Passing a sufficient amount of imix entries leads to invalid access to the
pkt_dev->imix_entries array because of the incorrect boundary check.
UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24
index 20 is out of range for type 'imix_pkt [20]'
CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
|
7.8 |
High |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clear port select structure when fail to create Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
Attempt to enable IPsec packet offload in tunnel mode in debug kernel
generates the following kernel panic, which is happening due to two
issues:
1. In SA add section, the should be _bh() variant when marking SA mode.
2. There is not needed flush_workqueue in SA delete routine. It is not
needed as at this stage as it is removed from SADB and the running work
will be canceled later in SA free.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.12.0+ #4 Not tainted
-----------------------------------------------------
charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
and this task is already holding:
ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
which would create a new lock dependency:
(&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&x->lock){+.-.}-{3:3}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
to a SOFTIRQ-irq-unsafe lock:
(&xa->xa_lock#24){+.+.}-{3:3}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xa->xa_lock#24);
local_irq_disable();
lock(&x->lock);
lock(&xa->xa_lock#24);
|
5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double free of TCP_Server_Info::hostname
When shutting down the server in cifs_put_tcp_session(), cifsd thread
might be reconnecting to multiple DFS targets before it realizes it
should exit the loop, so @server->hostname can't be freed as long as
cifsd thread isn't done. Otherwise the following can happen:
RIP: 0010:__slab_free+0x223/0x3c0
Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89
1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f>
0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80
RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246
RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068
RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400
RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000
R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500
R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068
FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000)
000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4:
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: afs: Fix merge preference rule failure condition syzbot reported a lock held when returning to userspace[1]. This is because if argc is less than 0 and the function returns directly, the held inode lock is not released. Fix this by store the error in ret and jump to done to clean up instead of returning directly. [dh: Modified Lizhi Xu's original patch to make it honour the error code from afs_split_string()] [1] WARNING: lock held when returning to user space! 6.13.0-rc3-syzkaller-00209-g499551201b5f #0 Not tainted ------------------------------------------------ syz-executor133/5823 is leaving the kernel with locks still held! 1 lock held by syz-executor133/5823: #0: ffff888071cffc00 (&sb->s_type->i_mutex_key#9){++++}-{4:4}, at: inode_lock include/linux/fs.h:818 [inline] #0: ffff888071cffc00 (&sb->s_type->i_mutex_key#9){++++}-{4:4}, at: afs_proc_addr_prefs_write+0x2bb/0x14e0 fs/afs/addr_prefs.c:388 | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock/bpf: return early if transport is not assigned Some of the core functions can only be called if the transport has been assigned. As Michal reported, a socket might have the transport at NULL, for example after a failed connect(), causing the following trace: BUG: kernel NULL pointer dereference, address: 00000000000000a0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+ RIP: 0010:vsock_connectible_has_data+0x1f/0x40 Call Trace: vsock_bpf_recvmsg+0xca/0x5e0 sock_recvmsg+0xb9/0xc0 __sys_recvfrom+0xb3/0x130 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e So we need to check the `vsk->transport` in vsock_bpf_recvmsg(), especially for connected sockets (stream/seqpacket) as we already do in __vsock_connectible_recvmsg(). | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: discard packets if the transport changes If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iomap: avoid avoid truncating 64-bit offset to 32 bits on 32-bit kernels, iomap_write_delalloc_scan() was inadvertently using a 32-bit position due to folio_next_index() returning an unsigned long. This could lead to an infinite loop when writing to an xfs filesystem. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock: prevent null-ptr-deref in vsock_*[has_data|has_space] Recent reports have shown how we sometimes call vsock_*_has_data() when a vsock socket has been de-assigned from a transport (see attached links), but we shouldn't. Previous commits should have solved the real problems, but we may have more in the future, so to avoid null-ptr-deref, we can return 0 (no space, no data available) but with a warning. This way the code should continue to run in a nearly consistent state and have a warning that allows us to debug future problems. | 5.5 |
Medium |
|
11h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: filemap: avoid truncating 64-bit offset to 32 bits On 32-bit kernels, folio_seek_hole_data() was inadvertently truncating a 64-bit value to 32 bits, leading to a possible infinite loop when writing to an xfs filesystem. | 5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: avoid NULL pointer dereference if no valid extent tree
[BUG]
Syzbot reported a crash with the following call trace:
BTRFS info (device loop0): scrub: started on devid 1
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs]
Call Trace:
|
5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1298: Add NULL check in ads1298_init devm_kasprintf() can return a NULL pointer on failure. A check on the return value of such a call in ads1298_init() is missing. Add it. | 5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: exfat: fix the infinite loop in exfat_readdir() If the file system is corrupted so that a cluster is linked to itself in the cluster chain, and there is an unused directory entry in the cluster, 'dentry' will not be incremented, causing condition 'dentry < max_dentries' unable to prevent an infinite loop. This infinite loop causes s_lock not to be released, and other tasks will hang, such as exfat_sync_fs(). This commit stops traversing the cluster chain when there is unused directory entry in the cluster to avoid this infinite loop. | 5.5 |
Medium |
|
12h09 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/sctp: Prevent autoclose integer overflow in sctp_association_init() While by default max_autoclose equals to INT_MAX / HZ, one may set net.sctp.max_autoclose to UINT_MAX. There is code in sctp_association_init() that can consequently trigger overflow. | 5.5 |
Medium |
|
12h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fgraph: Add READ_ONCE() when accessing fgraph_array[] In __ftrace_return_to_handler(), a loop iterates over the fgraph_array[] elements, which are fgraph_ops. The loop checks if an element is a fgraph_stub to prevent using a fgraph_stub afterward. However, if the compiler reloads fgraph_array[] after this check, it might race with an update to fgraph_array[] that introduces a fgraph_stub. This could result in the stub being processed, but the stub contains a null "func_hash" field, leading to a NULL pointer dereference. To ensure that the gops compared against the fgraph_stub matches the gops processed later, add a READ_ONCE(). A similar patch appears in commit 63a8dfb ("function_graph: Add READ_ONCE() when accessing fgraph_array[]"). | 4.7 |
Medium |
|
12h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gve: guard XSK operations on the existence of queues This patch predicates the enabling and disabling of XSK pools on the existence of queues. As it stands, if the interface is down, disabling or enabling XSK pools would result in a crash, as the RX queue pointer would be NULL. XSK pool registration will occur as part of the next interface up. Similarly, xsk_wakeup needs be guarded against queues disappearing while the function is executing, so a check against the GVE_PRIV_FLAGS_NAPI_ENABLED flag is added to synchronize with the disabling of the bit and the synchronize_net() in gve_turndown. | 5.5 |
Medium |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err The pointer need to be set to NULL, otherwise KASAN complains about use-after-free. Because in mtk_drm_bind, all private's drm are set as follows. private->all_drm_private[i]->drm = drm; And drm will be released by drm_dev_put in case mtk_drm_kms_init returns failure. However, the shutdown path still accesses the previous allocated memory in drm_atomic_helper_shutdown. [ 84.874820] watchdog: watchdog0: watchdog did not stop! [ 86.512054] ================================================================== [ 86.513162] BUG: KASAN: use-after-free in drm_atomic_helper_shutdown+0x33c/0x378 [ 86.514258] Read of size 8 at addr ffff0000d46fc068 by task shutdown/1 [ 86.515213] [ 86.515455] CPU: 1 UID: 0 PID: 1 Comm: shutdown Not tainted 6.13.0-rc1-mtk+gfa1a78e5d24b-dirty #55 [ 86.516752] Hardware name: Unknown Product/Unknown Product, BIOS 2022.10 10/01/2022 [ 86.517960] Call trace: [ 86.518333] show_stack+0x20/0x38 (C) [ 86.518891] dump_stack_lvl+0x90/0xd0 [ 86.519443] print_report+0xf8/0x5b0 [ 86.519985] kasan_report+0xb4/0x100 [ 86.520526] __asan_report_load8_noabort+0x20/0x30 [ 86.521240] drm_atomic_helper_shutdown+0x33c/0x378 [ 86.521966] mtk_drm_shutdown+0x54/0x80 [ 86.522546] platform_shutdown+0x64/0x90 [ 86.523137] device_shutdown+0x260/0x5b8 [ 86.523728] kernel_restart+0x78/0xf0 [ 86.524282] __do_sys_reboot+0x258/0x2f0 [ 86.524871] __arm64_sys_reboot+0x90/0xd8 [ 86.525473] invoke_syscall+0x74/0x268 [ 86.526041] el0_svc_common.constprop.0+0xb0/0x240 [ 86.526751] do_el0_svc+0x4c/0x70 [ 86.527251] el0_svc+0x4c/0xc0 [ 86.527719] el0t_64_sync_handler+0x144/0x168 [ 86.528367] el0t_64_sync+0x198/0x1a0 [ 86.528920] [ 86.529157] The buggy address belongs to the physical page: [ 86.529972] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff0000d46fd4d0 pfn:0x1146fc [ 86.531319] flags: 0xbfffc0000000000(node=0|zone=2|lastcpupid=0xffff) [ 86.532267] raw: 0bfffc0000000000 0000000000000000 dead000000000122 0000000000000000 [ 86.533390] raw: ffff0000d46fd4d0 0000000000000000 00000000ffffffff 0000000000000000 [ 86.534511] page dumped because: kasan: bad access detected [ 86.535323] [ 86.535559] Memory state around the buggy address: [ 86.536265] ffff0000d46fbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.537314] ffff0000d46fbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.538363] >ffff0000d46fc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.544733] ^ [ 86.551057] ffff0000d46fc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.557510] ffff0000d46fc100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 86.563928] ================================================================== [ 86.571093] Disabling lock debugging due to kernel taint [ 86.577642] Unable to handle kernel paging request at virtual address e0e9c0920000000b [ 86.581834] KASAN: maybe wild-memory-access in range [0x0752049000000058-0x075204900000005f] ... | 7.8 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix divide error in DM plane scale calcs
dm_get_plane_scale doesn't take into account plane scaled size equal to
zero, leading to a kernel oops due to division by zero. Fix by setting
out-scale size as zero when the dst size is zero, similar to what is
done by drm_calc_scale(). This issue started with the introduction of
cursor ovelay mode that uses this function to assess cursor mode changes
via dm_crtc_get_cursor_mode() before checking plane state.
[Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231
[ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024
[ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu]
[ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66
[ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246
[ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500
[ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4
[ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00
[ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010
[ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0
[ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000
[ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0
[ +0.000004] Call Trace:
[ +0.000007] |
5.5 |
Medium |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling Resolve kernel panic caused by improper handling of IRQs while accessing GPIO values. This is done by replacing generic_handle_irq with handle_nested_irq. | 5.5 |
Medium |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: pressure: zpa2326: fix information leak in triggered buffer The 'sample' local struct is used to push data to user space from a triggered buffer, but it has a hole between the temperature and the timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp). This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer The 'data' array is allocated via kmalloc() and it is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Use kzalloc for the memory allocation to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: light: vcnl4035: fix information leak in triggered buffer The 'buffer' local array is used to push data to userspace from a triggered buffer, but it does not set an initial value for the single data element, which is an u16 aligned to 8 bytes. That leaves at least 4 bytes uninitialized even after writing an integer value with regmap_read(). Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: imu: kmx61: fix information leak in triggered buffer The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: rockchip_saradc: fix information leak in triggered buffer The 'data' local struct is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads8688: fix information leak in triggered buffer The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
11h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix information leak in triggered buffer The 'scan' local struct is used to push data to user space from a triggered buffer, but it has a hole between the sample (unsigned int) and the timestamp. This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. | 7.1 |
High |
|
10h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ipvlan: Fix use-after-free in ipvlan_get_iflink(). syzbot presented an use-after-free report [0] regarding ipvlan and linkwatch. ipvlan does not hold a refcnt of the lower device unlike vlan and macvlan. If the linkwatch work is triggered for the ipvlan dev, the lower dev might have already been freed, resulting in UAF of ipvlan->phy_dev in ipvlan_get_iflink(). We can delay the lower dev unregistration like vlan and macvlan by holding the lower dev's refcnt in dev->netdev_ops->ndo_init() and releasing it in dev->priv_destructor(). Jakub pointed out calling .ndo_XXX after unregister_netdevice() has returned is error prone and suggested [1] addressing this UAF in the core by taking commit 750e51603395 ("net: avoid potential UAF in default_operstate()") further. Let's assume unregistering devices DOWN and use RCU protection in default_operstate() not to race with the device unregistration. [0]: BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944 CPU: 0 UID: 0 PID: 6944 Comm: kworker/u8:35 Not tainted 6.13.0-rc2-g9bc5c9515b48 #12 4c3cb9e8b4565456f6a355f312ff91f4f29b3c47 Hardware name: linux,dummy-virt (DT) Workqueue: events_unbound linkwatch_event Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:484 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load4_noabort+0x20/0x30 mm/kasan/report_generic.c:380 ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 dev_get_iflink+0x7c/0xd8 net/core/dev.c:674 default_operstate net/core/link_watch.c:45 [inline] rfc2863_policy+0x144/0x360 net/core/link_watch.c:72 linkwatch_do_dev+0x60/0x228 net/core/link_watch.c:175 __linkwatch_run_queue+0x2f4/0x5b8 net/core/link_watch.c:239 linkwatch_event+0x64/0xa8 net/core/link_watch.c:282 process_one_work+0x700/0x1398 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3391 kthread+0x2b0/0x360 kernel/kthread.c:389 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 Allocated by task 9303: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4283 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4289 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:650 alloc_netdev_mqs+0xb4/0x1118 net/core/dev.c:11209 rtnl_create_link+0x2b8/0xb60 net/core/rtnetlink.c:3595 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3771 __rtnl_newlink net/core/rtnetlink.c:3896 [inline] rtnl_newlink+0x122c/0x15c0 net/core/rtnetlink.c:4011 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x2ec/0x438 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __arm64_sys_sendto+0xe4/0x110 net/socket.c:2200 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el ---truncated--- | 7.8 |
High |
|
10h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is sent on HIP08 devices Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 | 5.5 |
Medium |
|
10h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix tlb invalidation when wedging If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6) | 5.5 |
Medium |
|
10h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: remove kernfs active break A warning was found: WARNING: CPU: 10 PID: 3486953 at fs/kernfs/file.c:828 CPU: 10 PID: 3486953 Comm: rmdir Kdump: loaded Tainted: G RIP: 0010:kernfs_should_drain_open_files+0x1a1/0x1b0 RSP: 0018:ffff8881107ef9e0 EFLAGS: 00010202 RAX: 0000000080000002 RBX: ffff888154738c00 RCX: dffffc0000000000 RDX: 0000000000000007 RSI: 0000000000000004 RDI: ffff888154738c04 RBP: ffff888154738c04 R08: ffffffffaf27fa15 R09: ffffed102a8e7180 R10: ffff888154738c07 R11: 0000000000000000 R12: ffff888154738c08 R13: ffff888750f8c000 R14: ffff888750f8c0e8 R15: ffff888154738ca0 FS: 00007f84cd0be740(0000) GS:ffff8887ddc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555f9fbe00c8 CR3: 0000000153eec001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kernfs_drain+0x15e/0x2f0 __kernfs_remove+0x165/0x300 kernfs_remove_by_name_ns+0x7b/0xc0 cgroup_rm_file+0x154/0x1c0 cgroup_addrm_files+0x1c2/0x1f0 css_clear_dir+0x77/0x110 kill_css+0x4c/0x1b0 cgroup_destroy_locked+0x194/0x380 cgroup_rmdir+0x2a/0x140 It can be explained by: rmdir echo 1 > cpuset.cpus kernfs_fop_write_iter // active=0 cgroup_rm_file kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain cpuset_write_resmask wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active This warning is caused by 'kernfs_break_active_protection' when it is writing to cpuset.cpus, and the cgroup is removed concurrently. The commit 3a5a6d0c2b03 ("cpuset: don't nest cgroup_mutex inside get_online_cpus()") made cpuset_hotplug_workfn asynchronous, This change involves calling flush_work(), which can create a multiple processes circular locking dependency that involve cgroup_mutex, potentially leading to a deadlock. To avoid deadlock. the commit 76bb5ab8f6e3 ("cpuset: break kernfs active protection in cpuset_write_resmask()") added 'kernfs_break_active_protection' in the cpuset_write_resmask. This could lead to this warning. After the commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset_write_resmask no longer needs to wait the hotplug to finish, which means that concurrent hotplug and cpuset operations are no longer possible. Therefore, the deadlock doesn't exist anymore and it does not have to 'break active protection' now. To fix this warning, just remove kernfs_break_active_protection operation in the 'cpuset_write_resmask'. | 5.5 |
Medium |
|
13h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: fix memory leak in tcp_conn_request()
If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will
return without free the dst memory, which allocated in af_ops->route_req.
Here is the kmemleak stack:
unreferenced object 0xffff8881198631c0 (size 240):
comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s)
hex dump (first 32 bytes):
00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................
81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U..............
backtrace:
[ |
5.5 |
Medium |
|
13h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netrom: check buffer length before accessing it Syzkaller reports an uninit value read from ax25cmp when sending raw message through ieee802154 implementation. ===================================================== BUG: KMSAN: uninit-value in ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 nr_dev_get+0x20e/0x450 net/netrom/nr_route.c:601 nr_route_frame+0x1a2/0xfc0 net/netrom/nr_route.c:774 nr_xmit+0x5a/0x1c0 net/netrom/nr_dev.c:144 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] raw_sendmsg+0x654/0xc10 net/ieee802154/socket.c:299 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] raw_sendmsg+0x36d/0xc10 net/ieee802154/socket.c:282 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5037 Comm: syz-executor166 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 ===================================================== This issue occurs because the skb buffer is too small, and it's actual allocation is aligned. This hides an actual issue, which is that nr_route_frame does not validate the buffer size before using it. Fix this issue by checking skb->len before accessing any fields in skb->data. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | 5.5 |
Medium |
|
13h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Skip restore TC rules for vport rep without loaded flag During driver unload, unregister_netdev is called after unloading vport rep. So, the mlx5e_rep_priv is already freed while trying to get rpriv->netdev, or walk rpriv->tc_ht, which results in use-after-free. So add the checking to make sure access the data of vport rep which is still loaded. | 7.8 |
High |
|
13h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Ensure 'ib_sge list' is accessible Move the declaration of the 'ib_sge list' variable outside the 'always_invalidate' block to ensure it remains accessible for use throughout the function. Previously, 'ib_sge list' was declared within the 'always_invalidate' block, limiting its accessibility, then caused a 'BUG: kernel NULL pointer dereference'[1]. ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2d0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? memcpy_orig+0xd5/0x140 rxe_mr_copy+0x1c3/0x200 [rdma_rxe] ? rxe_pool_get_index+0x4b/0x80 [rdma_rxe] copy_data+0xa5/0x230 [rdma_rxe] rxe_requester+0xd9b/0xf70 [rdma_rxe] ? finish_task_switch.isra.0+0x99/0x2e0 rxe_sender+0x13/0x40 [rdma_rxe] do_task+0x68/0x1e0 [rdma_rxe] process_one_work+0x177/0x330 worker_thread+0x252/0x390 ? __pfx_worker_thread+0x10/0x10 This change ensures the variable is available for subsequent operations that require it. [1] https://lore.kernel.org/linux-rdma/[email protected]/ | 5.5 |
Medium |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ila: serialize calls to nf_register_net_hooks()
syzbot found a race in ila_add_mapping() [1]
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501
CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
|
7.8 |
High |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
During the unmount path, at close_ctree(), we first stop the cleaner
kthread, using kthread_stop() which frees the associated task_struct, and
then stop and destroy all the work queues. However after we stopped the
cleaner we may still have a worker from the delalloc_workers queue running
inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(),
which in turn tries to wake up the cleaner kthread - which was already
destroyed before, resulting in a use-after-free on the task_struct.
Syzbot reported this with the following stack traces:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
Read of size 8 at addr ffff8880259d2818 by task kworker/u8:3/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.13.0-rc1-syzkaller-00002-gcdd30ebb1b9f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: btrfs-delalloc btrfs_work_helper
Call Trace:
|
7.8 |
High |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: set ATTR_CTIME flags when setting mtime
David reported that the new warning from setattr_copy_mgtime is coming
like the following.
[ 113.215316] ------------[ cut here ]------------
[ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 113.234797] Call Trace:
[ 113.235116] |
5.5 |
Medium |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv When mounting ocfs2 and then remounting it as read-only, a slab-use-after-free occurs after the user uses a syscall to quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the dangling pointer. During the remounting process, the pointer dqi_priv is freed but is never set as null leaving it to be accessed. Additionally, the read-only option for remounting sets the DQUOT_SUSPENDED flag instead of setting the DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the next quota, the function ocfs2_get_next_id is called and only checks the quota usage flags and not the quota suspended flags. To fix this, I set dqi_priv to null when it is freed after remounting with read-only and put a check for DQUOT_SUSPENDED in ocfs2_get_next_id. [[email protected]: coding-style cleanups] | 7.8 |
High |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Prevent integer overflow issue In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32 values that come from the user so the multiplication can lead to integer wrapping. Then we pass the result to uverbs_request_next_ptr() which also could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)" multiplication can also overflow on 32bit systems although it's fine on 64bit systems. This patch does two things. First, I've re-arranged the condition in uverbs_request_next_ptr() so that the use controlled variable "len" is on one side of the comparison by itself without any math. Then I've modified all the callers to use size_mul() for the multiplications. | 5.5 |
Medium |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm: adv7511: Fix use-after-free in adv7533_attach_dsi() The host_node pointer was assigned and freed in adv7533_parse_dt(), and later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put() in error path of probe() and also in the remove(). | 7.8 |
High |
|
13h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix TCP options overflow.
Syzbot reported the following splat:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline]
RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552
Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83
RSP: 0000:ffffc90003916c90 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac
R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007
R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
15h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy() In split_large_buddy(), we might call pfn_to_page() on a PFN that might not exist. In corner cases, such as when freeing the highest pageblock in the last memory section, this could result with CONFIG_SPARSEMEM && !CONFIG_SPARSEMEM_EXTREME in __pfn_to_section() returning NULL and and __section_mem_map_addr() dereferencing that NULL pointer. Let's fix it, and avoid doing a pfn_to_page() call for the first iteration, where we already have the page. So far this was found by code inspection, but let's just CC stable as the fix is easy. | 5.5 |
Medium |
|
14h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of FPMR will be retained. Before this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0xffff800083963d50 After this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | 6.1 |
Medium |
|
14h47 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained. The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case. | 6.1 |
Medium |
|
14h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove() This will ensure that the scsi host is cleaned up properly using scsi_host_dev_release(). Otherwise, it may lead to memory leaks. | 5.5 |
Medium |
|
12h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix for a potential deadlock This fixes a 'possible circular locking dependency detected' warning CPU0 CPU1 ---- ---- lock(&instance->reset_mutex); lock(&shost->scan_mutex); lock(&instance->reset_mutex); lock(&shost->scan_mutex); Fix this by temporarily releasing the reset_mutex. | 5.5 |
Medium |
|
12h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM In some cases, rk_hdptx_phy_runtime_resume() may be invoked before platform_set_drvdata() is executed in ->probe(), leading to a NULL pointer dereference when using the return of dev_get_drvdata(). Ensure platform_set_drvdata() is called before devm_pm_runtime_enable(). | 5.5 |
Medium |
|
12h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req() While receiving an MST up request message from one thread in drm_dp_mst_handle_up_req(), the MST topology could be removed from another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL. This could lead to a NULL deref/use-after-free of mst_primary in drm_dp_mst_handle_up_req(). Avoid the above by holding a reference for mst_primary in drm_dp_mst_handle_up_req() while it's used. v2: Fix kfreeing the request if getting an mst_primary reference fails. | 7.8 |
High |
|
12h35 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/modes: Avoid divide by zero harder in drm_mode_vrefresh() drm_mode_vrefresh() is trying to avoid divide by zero by checking whether htotal or vtotal are zero. But we may still end up with a div-by-zero of vtotal*htotal*... | 5.5 |
Medium |
|
12h35 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet
If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is
fully initialized, we can hit the panic below:
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_utils
...
BUG: kernel NULL pointer dereference, address: 0000000000000000
CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1
RIP: 0010:hv_pkt_iter_first+0x12/0xd0
Call Trace:
...
vmbus_recvpacket
hv_kvp_onchannelcallback
vmbus_on_event
tasklet_action_common
tasklet_action
handle_softirqs
irq_exit_rcu
sysvec_hyperv_stimer0
|
5.5 |
Medium |
|
12h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: block: Prevent potential deadlocks in zone write plug error recovery Zone write plugging for handling writes to zones of a zoned block device always execute a zone report whenever a write BIO to a zone fails. The intent of this is to ensure that the tracking of a zone write pointer is always correct to ensure that the alignment to a zone write pointer of write BIOs can be checked on submission and that we can always correctly emulate zone append operations using regular write BIOs. However, this error recovery scheme introduces a potential deadlock if a device queue freeze is initiated while BIOs are still plugged in a zone write plug and one of these write operation fails. In such case, the disk zone write plug error recovery work is scheduled and executes a report zone. This in turn can result in a request allocation in the underlying driver to issue the report zones command to the device. But with the device queue freeze already started, this allocation will block, preventing the report zone execution and the continuation of the processing of the plugged BIOs. As plugged BIOs hold a queue usage reference, the queue freeze itself will never complete, resulting in a deadlock. Avoid this problem by completely removing from the zone write plugging code the use of report zones operations after a failed write operation, instead relying on the device user to either execute a report zones, reset the zone, finish the zone, or give up writing to the device (which is a fairly common pattern for file systems which degrade to read-only after write failures). This is not an unreasonnable requirement as all well-behaved applications, FSes and device mapper already use report zones to recover from write errors whenever possible by comparing the current position of a zone write pointer with what their assumption about the position is. The changes to remove the automatic error recovery are as follows: - Completely remove the error recovery work and its associated resources (zone write plug list head, disk error list, and disk zone_wplugs_work work struct). This also removes the functions disk_zone_wplug_set_error() and disk_zone_wplug_clear_error(). - Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write plug whenever a write opration targetting the zone of the zone write plug fails. This flag indicates that the zone write pointer offset is not reliable and that it must be updated when the next report zone, reset zone, finish zone or disk revalidation is executed. - Modify blk_zone_write_plug_bio_endio() to set the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed write BIO. - Modify the function disk_zone_wplug_set_wp_offset() to clear this new flag, thus implementing recovery of a correct write pointer offset with the reset (all) zone and finish zone operations. - Modify blkdev_report_zones() to always use the disk_report_zones_cb() callback so that disk_zone_wplug_sync_wp_offset() can be called for any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag. This implements recovery of a correct write pointer offset for zone write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within the range of the report zones operation executed by the user. - Modify blk_revalidate_seq_zone() to call disk_zone_wplug_sync_wp_offset() for all sequential write required zones when a zoned block device is revalidated, thus always resolving any inconsistency between the write pointer offset of zone write plugs and the actual write pointer position of sequential zones. | 5.5 |
Medium |
|
12h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: IDLETIMER: Fix for possible ABBA deadlock Deletion of the last rule referencing a given idletimer may happen at the same time as a read of its file in sysfs: | ====================================================== | WARNING: possible circular locking dependency detected | 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted | ------------------------------------------------------ | iptables/3303 is trying to acquire lock: | ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20 | | but task is already holding lock: | ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v] | | which lock already depends on the new lock. A simple reproducer is: | #!/bin/bash | | while true; do | iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | done & | while true; do | cat /sys/class/xt_idletimer/timers/testme >/dev/null | done Avoid this by freeing list_mutex right after deleting the element from the list, then continuing with the teardown. | 5.5 |
Medium |
|
12h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: iso: Fix circular lock in iso_listen_bis This fixes the circular locking dependency warning below, by releasing the socket lock before enterning iso_listen_bis, to avoid any potential deadlock with hdev lock. [ 75.307983] ====================================================== [ 75.307984] WARNING: possible circular locking dependency detected [ 75.307985] 6.12.0-rc6+ #22 Not tainted [ 75.307987] ------------------------------------------------------ [ 75.307987] kworker/u81:2/2623 is trying to acquire lock: [ 75.307988] ffff8fde1769da58 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO) at: iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308021] but task is already holding lock: [ 75.308022] ffff8fdd61a10078 (&hdev->lock) at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308053] which lock already depends on the new lock. [ 75.308054] the existing dependency chain (in reverse order) is: [ 75.308055] -> #1 (&hdev->lock){+.+.}-{3:3}: [ 75.308057] __mutex_lock+0xad/0xc50 [ 75.308061] mutex_lock_nested+0x1b/0x30 [ 75.308063] iso_sock_listen+0x143/0x5c0 [bluetooth] [ 75.308085] __sys_listen_socket+0x49/0x60 [ 75.308088] __x64_sys_listen+0x4c/0x90 [ 75.308090] x64_sys_call+0x2517/0x25f0 [ 75.308092] do_syscall_64+0x87/0x150 [ 75.308095] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 75.308098] -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 75.308100] __lock_acquire+0x155e/0x25f0 [ 75.308103] lock_acquire+0xc9/0x300 [ 75.308105] lock_sock_nested+0x32/0x90 [ 75.308107] iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308128] hci_connect_cfm+0x6c/0x190 [bluetooth] [ 75.308155] hci_le_per_adv_report_evt+0x27b/0x2f0 [bluetooth] [ 75.308180] hci_le_meta_evt+0xe7/0x200 [bluetooth] [ 75.308206] hci_event_packet+0x21f/0x5c0 [bluetooth] [ 75.308230] hci_rx_work+0x3ae/0xb10 [bluetooth] [ 75.308254] process_one_work+0x212/0x740 [ 75.308256] worker_thread+0x1bd/0x3a0 [ 75.308258] kthread+0xe4/0x120 [ 75.308259] ret_from_fork+0x44/0x70 [ 75.308261] ret_from_fork_asm+0x1a/0x30 [ 75.308263] other info that might help us debug this: [ 75.308264] Possible unsafe locking scenario: [ 75.308264] CPU0 CPU1 [ 75.308265] ---- ---- [ 75.308265] lock(&hdev->lock); [ 75.308267] lock(sk_lock- AF_BLUETOOTH-BTPROTO_ISO); [ 75.308268] lock(&hdev->lock); [ 75.308269] lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); [ 75.308270] *** DEADLOCK *** [ 75.308271] 4 locks held by kworker/u81:2/2623: [ 75.308272] #0: ffff8fdd66e52148 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x443/0x740 [ 75.308276] #1: ffffafb488b7fe48 ((work_completion)(&hdev->rx_work)), at: process_one_work+0x1ce/0x740 [ 75.308280] #2: ffff8fdd61a10078 (&hdev->lock){+.+.}-{3:3} at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308304] #3: ffffffffb6ba4900 (rcu_read_lock){....}-{1:2}, at: hci_connect_cfm+0x29/0x190 [bluetooth] | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: Add cancel_work_sync before module remove If we remove the module which will call mpc52xx_spi_remove it will free 'ms' through spi_unregister_controller. while the work ms->work will be used. The sequence of operations that may lead to a UAF bug. Fix it by ensuring that the work is canceled before proceeding with the cleanup in mpc52xx_spi_remove. | 7.8 |
High |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c->root is NULL as what it is initialized. __bch_btree_node_alloc() never returns NULL but c->root is possible to be NULL at above line 1721. This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't take dev_replace rwsem on task already holding it
Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of
the RAID stripe-tree, we get the following splat from lockdep:
BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started
============================================
WARNING: possible recursive locking detected
6.11.0-rc3-btrfs-for-next #599 Not tainted
--------------------------------------------
btrfs/2326 is trying to acquire lock:
ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
but task is already holding lock:
ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&fs_info->dev_replace.rwsem);
lock(&fs_info->dev_replace.rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by btrfs/2326:
#0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
stack backtrace:
CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
|
5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: check return value of ieee80211_probereq_get() for RNR The return value of ieee80211_probereq_get() might be NULL, so check it before using to avoid NULL pointer access. Addresses-Coverity-ID: 1529805 ("Dereference null return value") | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dlm: fix possible lkb_resource null dereference This patch fixes a possible null pointer dereference when this function is called from request_lock() as lkb->lkb_resource is not assigned yet, only after validate_lock_args() by calling attach_lkb(). Another issue is that a resource name could be a non printable bytearray and we cannot assume to be ASCII coded. The log functionality is probably never being hit when DLM is used in normal way and no debug logging is enabled. The null pointer dereference can only occur on a new created lkb that does not have the resource assigned yet, it probably never hits the null pointer dereference but we should be sure that other changes might not change this behaviour and we actually can hit the mentioned null pointer dereference. In this patch we just drop the printout of the resource name, the lkb id is enough to make a possible connection to a resource name if this exists. | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dma-debug: fix a possible deadlock on radix_lock radix_lock() shouldn't be held while holding dma_hash_entry[idx].lock otherwise, there's a possible deadlock scenario when dma debug API is called holding rq_lock(): CPU0 CPU1 CPU2 dma_free_attrs() check_unmap() add_dma_entry() __schedule() //out (A) rq_lock() get_hash_bucket() (A) dma_entry_hash check_sync() (A) radix_lock() (W) dma_entry_hash dma_entry_free() (W) radix_lock() // CPU2's one (W) rq_lock() CPU1 situation can happen when it extending radix tree and it tries to wake up kswapd via wake_all_kswapd(). CPU2 situation can happen while perf_event_task_sched_out() (i.e. dma sync operation is called while deleting perf_event using etm and etr tmc which are Arm Coresight hwtracing driver backends). To remove this possible situation, call dma_entry_free() after put_hash_bucket() in check_unmap(). | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pinmux: Use sequential access to access desc->pinmux data When two client of the same gpio call pinctrl_select_state() for the same functionality, we are seeing NULL pointer issue while accessing desc->mux_owner. Let's say two processes A, B executing in pin_request() for the same pin and process A updates the desc->mux_usecount but not yet updated the desc->mux_owner while process B see the desc->mux_usecount which got updated by A path and further executes strcmp and while accessing desc->mux_owner it crashes with NULL pointer. Serialize the access to mux related setting with a mutex lock. cpu0 (process A) cpu1(process B) pinctrl_select_state() { pinctrl_select_state() { pin_request() { pin_request() { ... .... } else { desc->mux_usecount++; desc->mux_usecount && strcmp(desc->mux_owner, owner)) { if (desc->mux_usecount > 1) return 0; desc->mux_owner = owner; } } | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when the ring is being stopped. Depending on timing between ring stop request completion, interrupt handler removal and code execution this may lead to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run after the io_data pointer is set to NULL in hci_dma_cleanup(). Prevent this my masking the ring interrupts before ring stop request. | 5.5 |
Medium |
|
12h25 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac | 5.5 |
Medium |
|
17h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: soc: imx8m: Probe the SoC driver as platform driver With driver_async_probe=* on kernel command line, the following trace is produced because on i.MX8M Plus hardware because the soc-imx8m.c driver calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock driver is not yet probed. This was not detected during regular testing without driver_async_probe. Convert the SoC code to platform driver and instantiate a platform device in its current device_initcall() to probe the platform driver. Rework .soc_revision callback to always return valid error code and return SoC revision via parameter. This way, if anything in the .soc_revision callback return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get retried later. " ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603 Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : imx8mm_soc_revision+0xdc/0x180 lr : imx8mm_soc_revision+0xd0/0x180 sp : ffff8000821fbcc0 x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120 x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311 x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8 x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801 x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3 x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb Call trace: imx8mm_soc_revision+0xdc/0x180 imx8_soc_init+0xb0/0x1e0 do_one_initcall+0x94/0x1a8 kernel_init_freeable+0x240/0x2a8 kernel_init+0x28/0x140 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- SoC: i.MX8MP revision 1.1 " | 5.5 |
Medium |
|
17h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: put bpf_link's program when link is safe to be deallocated In general, BPF link's underlying BPF program should be considered to be reachable through attach hook -> link -> prog chain, and, pessimistically, we have to assume that as long as link's memory is not safe to free, attach hook's code might hold a pointer to BPF program and use it. As such, it's not (generally) correct to put link's program early before waiting for RCU GPs to go through. More eager bpf_prog_put() that we currently do is mostly correct due to BPF program's release code doing similar RCU GP waiting, but as will be shown in the following patches, BPF program can be non-sleepable (and, thus, reliant on only "classic" RCU GP), while BPF link's attach hook can have sleepable semantics and needs to be protected by RCU Tasks Trace, and for such cases BPF link has to go through RCU Tasks Trace + "classic" RCU GPs before being deallocated. And so, if we put BPF program early, we might free BPF program before we free BPF link, leading to use-after-free situation. So, this patch defers bpf_prog_put() until we are ready to perform bpf_link's deallocation. At worst, this delays BPF program freeing by one extra RCU GP, but that seems completely acceptable. Alternatively, we'd need more elaborate ways to determine BPF hook, BPF link, and BPF program lifetimes, and how they relate to each other, which seems like an unnecessary complication. Note, for most BPF links we still will perform eager bpf_prog_put() and link dealloc, so for those BPF links there are no observable changes whatsoever. Only BPF links that use deferred dealloc might notice slightly delayed freeing of BPF programs. Also, to reduce code and logic duplication, extract program put + link dealloc logic into bpf_link_dealloc() helper. | 7.8 |
High |
|
17h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a Fix the dtc warnings: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"): WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0 Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0 The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a"), which has fixed the issue for ls2k (despite its subject mentions ls7a). | 5.5 |
Medium |
|
17h52 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adding array index check to prevent memory corruption [Why & How] Array indices out of bound caused memory corruption. Adding checks to ensure that array index stays in bound. | 7.8 |
High |
|
17h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to restrict this maximum depth to a more reasonable value not to harm performance. Remove unnecessary WARN_ON_ONCE which is reachable from userspace. | 5.5 |
Medium |
|
17h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration() acpi_dev_hid_match() does not check for adev == NULL, dereferencing it unconditional. Add a check for adev being NULL before calling acpi_dev_hid_match(). At the moment acpi_quirk_skip_serdev_enumeration() is never called with a controller_parent without an ACPI companion, but better safe than sorry. | 5.5 |
Medium |
|
17h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: powerpc/prom_init: Fixup missing powermac #size-cells On some powermacs `escc` nodes are missing `#size-cells` properties, which is deprecated and now triggers a warning at boot since commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling"). For example: Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000 WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108 Hardware name: PowerMac3,1 7400 0xc0209 PowerMac ... Call Trace: of_bus_n_size_cells+0x98/0x108 (unreliable) of_bus_default_count_cells+0x40/0x60 __of_get_address+0xc8/0x21c __of_address_to_resource+0x5c/0x228 pmz_init_port+0x5c/0x2ec pmz_probe.isra.0+0x144/0x1e4 pmz_console_init+0x10/0x48 console_init+0xcc/0x138 start_kernel+0x5c4/0x694 As powermacs boot via prom_init it's possible to add the missing properties to the device tree during boot, avoiding the warning. Note that `escc-legacy` nodes are also missing `#size-cells` properties, but they are skipped by the macio driver, so leave them alone. Depends-on: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling") | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: quota: flush quota_release_work upon quota writeback One of the paths quota writeback is called from is: freeze_super() sync_filesystem() ext4_sync_fs() dquot_writeback_dquots() Since we currently don't always flush the quota_release_work queue in this path, we can end up with the following race: 1. dquot are added to releasing_dquots list during regular operations. 2. FS Freeze starts, however, this does not flush the quota_release_work queue. 3. Freeze completes. 4. Kernel eventually tries to flush the workqueue while FS is frozen which hits a WARN_ON since transaction gets started during frozen state: ext4_journal_check_start+0x28/0x110 [ext4] (unreliable) __ext4_journal_start_sb+0x64/0x1c0 [ext4] ext4_release_dquot+0x90/0x1d0 [ext4] quota_release_workfn+0x43c/0x4d0 Which is the following line: WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE); Which ultimately results in generic/390 failing due to dmesg noise. This was detected on powerpc machine 15 cores. To avoid this, make sure to flush the workqueue during dquot_writeback_dquots() so we dont have any pending workitems after freeze. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur
The action force umount(umount -f) will attempt to kill all rpc_task even
umount operation may ultimately fail if some files remain open.
Consequently, if an action attempts to open a file, it can potentially
send two rpc_task to nfs server.
NFS CLIENT
thread1 thread2
open("file")
...
nfs4_do_open
_nfs4_do_open
_nfs4_open_and_get_state
_nfs4_proc_open
nfs4_run_open_task
/* rpc_task1 */
rpc_run_task
rpc_wait_for_completion_task
umount -f
nfs_umount_begin
rpc_killall_tasks
rpc_signal_task
rpc_task1 been wakeup
and return -512
_nfs4_do_open // while loop
...
nfs4_run_open_task
/* rpc_task2 */
rpc_run_task
rpc_wait_for_completion_task
While processing an open request, nfsd will first attempt to find or
allocate an nfs4_openowner. If it finds an nfs4_openowner that is not
marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since
two rpc_task can attempt to open the same file simultaneously from the
client to server, and because two instances of nfsd can run
concurrently, this situation can lead to lots of memory leak.
Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be
triggered.
NFS SERVER
nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// alloc oo1, stateid1
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// find oo1, without NFS4_OO_CONFIRMED
release_openowner
unhash_openowner_locked
list_del_init(&oo->oo_perclient)
// cannot find this oo
// from client, LEAK!!!
alloc_stateowner // alloc oo2
nfsd4_process_open2
init_open_stateid
// associate oo1
// with stateid1, stateid1 LEAK!!!
nfs4_get_vfs_file
// alloc nfsd_file1 and nfsd_file_mark1
// all LEAK!!!
nfsd4_process_open2
...
write_threads
...
nfsd_destroy_serv
nfsd_shutdown_net
nfs4_state_shutdown_net
nfs4_state_destroy_net
destroy_client
__destroy_client
// won't find oo1!!!
nfsd_shutdown_generic
nfsd_file_cache_shutdown
kmem_cache_destroy
for nfsd_file_slab
and nfsd_file_mark_slab
// bark since nfsd_file1
// and nfsd_file_mark1
// still alive
=======================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
-----------------------------------------------------------------------
Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28
flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
|
5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers in sti_hqvdp_atomic_check The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/sti: avoid potential dereference of error pointers The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix handling of plane refcount [Why] The mechanism to backup and restore plane states doesn't maintain refcount, which can cause issues if the refcount of the plane changes in between backup and restore operations, such as memory leaks if the refcount was supposed to go down, or double frees / invalid memory accesses if the refcount was supposed to go up. [How] Cache and re-apply current refcount when restoring plane states. | 7.8 |
High |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: add a sanity check for btrfs root in btrfs_search_slot() Syzbot reports a null-ptr-deref in btrfs_search_slot(). The reproducer is using rescue=ibadroots, and the extent tree root is corrupted thus the extent tree is NULL. When scrub tries to search the extent tree to gather the needed extent info, btrfs_search_slot() doesn't check if the target root is NULL or not, resulting the null-ptr-deref. Add sanity check for btrfs root before using it in btrfs_search_slot(). | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: kunit: Fix potential null dereference in kunit_device_driver_test() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add a NULL check for test_state. | 5.5 |
Medium |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: kunit: string-stream: Fix a UAF bug in kunit_init_suite() In kunit_debugfs_create_suite(), if alloc_string_stream() fails in the kunit_suite_for_each_test_case() loop, the "suite->log = stream" has assigned before, and the error path only free the suite->log's stream memory but not set it to NULL, so the later string_stream_clear() of suite->log in kunit_init_suite() will cause below UAF bug. Set stream pointer to NULL after free to fix it. Unable to handle kernel paging request at virtual address 006440150000030d Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [006440150000030d] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: iio_test_gts industrialio_gts_helper cfg80211 rfkill ipv6 [last unloaded: iio_test_gts] CPU: 5 UID: 0 PID: 6253 Comm: modprobe Tainted: G B W N 6.12.0-rc4+ #458 Tainted: [B]=BAD_PAGE, [W]=WARN, [N]=TEST Hardware name: linux,dummy-virt (DT) pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : string_stream_clear+0x54/0x1ac lr : string_stream_clear+0x1a8/0x1ac sp : ffffffc080b47410 x29: ffffffc080b47410 x28: 006440550000030d x27: ffffff80c96b5e98 x26: ffffff80c96b5e80 x25: ffffffe461b3f6c0 x24: 0000000000000003 x23: ffffff80c96b5e88 x22: 1ffffff019cdf4fc x21: dfffffc000000000 x20: ffffff80ce6fa7e0 x19: 032202a80000186d x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffe45c355cb4 x14: ffffffe45c35589c x13: ffffffe45c03da78 x12: ffffffb810168e75 x11: 1ffffff810168e74 x10: ffffffb810168e74 x9 : dfffffc000000000 x8 : 0000000000000004 x7 : 0000000000000003 x6 : 0000000000000001 x5 : ffffffc080b473a0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffffffe462fbf620 x0 : dfffffc000000000 Call trace: string_stream_clear+0x54/0x1ac __kunit_test_suites_init+0x108/0x1d8 kunit_exec_run_tests+0xb8/0x100 kunit_module_notify+0x400/0x55c notifier_call_chain+0xfc/0x3b4 blocking_notifier_call_chain+0x68/0x9c do_init_module+0x24c/0x5c8 load_module+0x4acc/0x4e90 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2d4/0x57c __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f9400753 d2dff800 f2fbffe0 d343fe7c (38e06b80) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception | 7.8 |
High |
|
17h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information These four chips: * W25N512GW * W25N01GW * W25N01JW * W25N02JW all require a single bit of ECC strength and thus feature an on-die Hamming-like ECC engine. There is no point in filling a ->get_status() callback for them because the main ECC status bytes are located in standard places, and retrieving the number of bitflips in case of corrected chunk is both useless and unsupported (if there are bitflips, then there is 1 at most, so no need to query the chip for that). Without this change, a kernel warning triggers every time a bit flips. | 5.5 |
Medium |
|
16h36 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/sched: netem: account for backlog updates from child qdisc
In general, 'qlen' of any classful qdisc should keep track of the
number of packets that the qdisc itself and all of its children holds.
In case of netem, 'qlen' only accounts for the packets in its internal
tfifo. When netem is used with a child qdisc, the child qdisc can use
'qdisc_tree_reduce_backlog' to inform its parent, netem, about created
or dropped SKBs. This function updates 'qlen' and the backlog statistics
of netem, but netem does not account for changes made by a child qdisc.
'qlen' then indicates the wrong number of packets in the tfifo.
If a child qdisc creates new SKBs during enqueue and informs its parent
about this, netem's 'qlen' value is increased. When netem dequeues the
newly created SKBs from the child, the 'qlen' in netem is not updated.
If 'qlen' reaches the configured sch->limit, the enqueue function stops
working, even though the tfifo is not full.
Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configure netem as root
qdisc and tbf as its child on the outgoing interface of the machine
as follows:
$ tc qdisc add dev |
5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg Syzbot reports [1] an uninitialized value issue found by KMSAN in dib3000_read_reg(). Local u8 rb[2] is used in i2c_transfer() as a read buffer; in case that call fails, the buffer may end up with some undefined values. Since no elaborate error handling is expected in dib3000_write_reg(), simply zero out rb buffer to mitigate the problem. [1] Syzkaller report dvb-usb: bulk message failed: -22 (6/0) ===================================================== BUG: KMSAN: uninit-value in dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 dibusb_dib3000mb_frontend_attach+0x155/0x2f0 drivers/media/usb/dvb-usb/dibusb-mb.c:31 dvb_usb_adapter_frontend_init+0xed/0x9a0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:90 [inline] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:186 [inline] dvb_usb_device_init+0x25a8/0x3760 drivers/media/usb/dvb-usb/dvb-usb-init.c:310 dibusb_probe+0x46/0x250 drivers/media/usb/dvb-usb/dibusb-mb.c:110 ... Local variable rb created at: dib3000_read_reg+0x86/0x4e0 drivers/media/dvb-frontends/dib3000mb.c:54 dib3000mb_attach+0x123/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 ... | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP disabled can trigger the following bug, as pcpu_hot is unavailable: [ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c [ 8.471849] #PF: supervisor read access in kernel mode [ 8.471881] #PF: error_code(0x0000) - not-present page Fix by inlining a return 0 in the !CONFIG_SMP case. | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dmaengine: at_xdmac: avoid null_prt_deref in at_xdmac_prep_dma_memset The at_xdmac_memset_create_desc may return NULL, which will lead to a null pointer dereference. For example, the len input is error, or the atchan->free_descs_list is empty and memory is exhausted. Therefore, add check to avoid this. | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/vas: Add close() callback in vas_vm_ops struct The mapping VMA address is saved in VAS window struct when the paste address is mapped. This VMA address is used during migration to unmap the paste address if the window is active. The paste address mapping will be removed when the window is closed or with the munmap(). But the VMA address in the VAS window is not updated with munmap() which is causing invalid access during migration. The KASAN report shows: [16386.254991] BUG: KASAN: slab-use-after-free in reconfig_close_windows+0x1a0/0x4e8 [16386.255043] Read of size 8 at addr c00000014a819670 by task drmgr/696928 [16386.255096] CPU: 29 UID: 0 PID: 696928 Comm: drmgr Kdump: loaded Tainted: G B 6.11.0-rc5-nxgzip #2 [16386.255128] Tainted: [B]=BAD_PAGE [16386.255148] Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.00 (NH1110_016) hv:phyp pSeries [16386.255181] Call Trace: [16386.255202] [c00000016b297660] [c0000000018ad0ac] dump_stack_lvl+0x84/0xe8 (unreliable) [16386.255246] [c00000016b297690] [c0000000006e8a90] print_report+0x19c/0x764 [16386.255285] [c00000016b297760] [c0000000006e9490] kasan_report+0x128/0x1f8 [16386.255309] [c00000016b297880] [c0000000006eb5c8] __asan_load8+0xac/0xe0 [16386.255326] [c00000016b2978a0] [c00000000013f898] reconfig_close_windows+0x1a0/0x4e8 [16386.255343] [c00000016b297990] [c000000000140e58] vas_migration_handler+0x3a4/0x3fc [16386.255368] [c00000016b297a90] [c000000000128848] pseries_migrate_partition+0x4c/0x4c4 ... [16386.256136] Allocated by task 696554 on cpu 31 at 16377.277618s: [16386.256149] kasan_save_stack+0x34/0x68 [16386.256163] kasan_save_track+0x34/0x80 [16386.256175] kasan_save_alloc_info+0x58/0x74 [16386.256196] __kasan_slab_alloc+0xb8/0xdc [16386.256209] kmem_cache_alloc_noprof+0x200/0x3d0 [16386.256225] vm_area_alloc+0x44/0x150 [16386.256245] mmap_region+0x214/0x10c4 [16386.256265] do_mmap+0x5fc/0x750 [16386.256277] vm_mmap_pgoff+0x14c/0x24c [16386.256292] ksys_mmap_pgoff+0x20c/0x348 [16386.256303] sys_mmap+0xd0/0x160 ... [16386.256350] Freed by task 0 on cpu 31 at 16386.204848s: [16386.256363] kasan_save_stack+0x34/0x68 [16386.256374] kasan_save_track+0x34/0x80 [16386.256384] kasan_save_free_info+0x64/0x10c [16386.256396] __kasan_slab_free+0x120/0x204 [16386.256415] kmem_cache_free+0x128/0x450 [16386.256428] vm_area_free_rcu_cb+0xa8/0xd8 [16386.256441] rcu_do_batch+0x2c8/0xcf0 [16386.256458] rcu_core+0x378/0x3c4 [16386.256473] handle_softirqs+0x20c/0x60c [16386.256495] do_softirq_own_stack+0x6c/0x88 [16386.256509] do_softirq_own_stack+0x58/0x88 [16386.256521] __irq_exit_rcu+0x1a4/0x20c [16386.256533] irq_exit+0x20/0x38 [16386.256544] interrupt_async_exit_prepare.constprop.0+0x18/0x2c ... [16386.256717] Last potentially related work creation: [16386.256729] kasan_save_stack+0x34/0x68 [16386.256741] __kasan_record_aux_stack+0xcc/0x12c [16386.256753] __call_rcu_common.constprop.0+0x94/0xd04 [16386.256766] vm_area_free+0x28/0x3c [16386.256778] remove_vma+0xf4/0x114 [16386.256797] do_vmi_align_munmap.constprop.0+0x684/0x870 [16386.256811] __vm_munmap+0xe0/0x1f8 [16386.256821] sys_munmap+0x54/0x6c [16386.256830] system_call_exception+0x1a0/0x4a0 [16386.256841] system_call_vectored_common+0x15c/0x2ec [16386.256868] The buggy address belongs to the object at c00000014a819670 which belongs to the cache vm_area_struct of size 168 [16386.256887] The buggy address is located 0 bytes inside of freed 168-byte region [c00000014a819670, c00000014a819718) [16386.256915] The buggy address belongs to the physical page: [16386.256928] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a81 [16386.256950] memcg:c0000000ba430001 [16386.256961] anon flags: 0x43ffff800000000(node=4|zone=0|lastcpupid=0x7ffff) [16386.256975] page_type: 0xfdffffff(slab) [16386 ---truncated--- | 7.8 |
High |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ublk: detach gendisk from ublk device if add_disk() fails Inside ublk_abort_requests(), gendisk is grabbed for aborting all inflight requests. And ublk_abort_requests() is called when exiting the uring context or handling timeout. If add_disk() fails, the gendisk may have been freed when calling ublk_abort_requests(), so use-after-free can be caused when getting disk's reference in ublk_abort_requests(). Fixes the bug by detaching gendisk from ublk device if add_disk() fails. | 7.8 |
High |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent bad count for tracing_cpumask_write If a large count is provided, it will trigger a warning in bitmap_parse_user. Also check zero for it. | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/fred: Clear WFE in missing-ENDBRANCH #CPs An indirect branch instruction sets the CPU indirect branch tracker (IBT) into WAIT_FOR_ENDBRANCH (WFE) state and WFE stays asserted across the instruction boundary. When the decoder finds an inappropriate instruction while WFE is set ENDBR, the CPU raises a #CP fault. For the "kernel IBT no ENDBR" selftest where #CPs are deliberately triggered, the WFE state of the interrupted context needs to be cleared to let execution continue. Otherwise when the CPU resumes from the instruction that just caused the previous #CP, another missing-ENDBRANCH #CP is raised and the CPU enters a dead loop. This is not a problem with IDT because it doesn't preserve WFE and IRET doesn't set WFE. But FRED provides space on the entry stack (in an expanded CS area) to save and restore the WFE state, thus the WFE state is no longer clobbered, so software must clear it. Clear WFE to avoid dead looping in ibt_clear_fred_wfe() and the !ibt_fatal code path when execution is allowed to continue. Clobbering WFE in any other circumstance is a security-relevant bug. [ dhansen: changelog rewording ] | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI/MSI: Handle lack of irqdomain gracefully Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a RISCV platform which does not provide PCI/MSI support: WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32 __pci_enable_msix_range+0x30c/0x596 pci_msi_setup_msi_irqs+0x2c/0x32 pci_alloc_irq_vectors_affinity+0xb8/0xe2 RISCV uses hierarchical interrupt domains and correctly does not implement the legacy fallback. The warning triggers from the legacy fallback stub. That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent domain is associated with the device or not. There is a check for MSI-X, which has a legacy assumption. But that legacy fallback assumption is only valid when legacy support is enabled, but otherwise the check should simply return -ENOTSUPP. Loongarch tripped over the same problem and blindly enabled legacy support without implementing the legacy fallbacks. There are weak implementations which return an error, so the problem was papered over. Correct pci_msi_domain_supports() to evaluate the legacy mode and add the missing supported check into the MSI enable path to complete it. | 5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free when COWing tree bock and tracing is enabled When a COWing a tree block, at btrfs_cow_block(), and we have the tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled (CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent buffer while inside the tracepoint code. This is because in some paths that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding the last reference on the extent buffer @buf so btrfs_force_cow_block() drops the last reference on the @buf extent buffer when it calls free_extent_buffer_stale(buf), which schedules the release of the extent buffer with RCU. This means that if we are on a kernel with preemption, the current task may be preempted before calling trace_btrfs_cow_block() and the extent buffer already released by the time trace_btrfs_cow_block() is called, resulting in a use-after-free. Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to btrfs_force_cow_block() before the COWed extent buffer is freed. This also has a side effect of invoking the tracepoint in the tree defrag code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is called there, but this is fine and it was actually missing there. | 7.8 |
High |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: check folio mapping after unlock in relocate_one_folio()
When we call btrfs_read_folio() to bring a folio uptodate, we unlock the
folio. The result of that is that a different thread can modify the
mapping (like remove it with invalidate) before we call folio_lock().
This results in an invalid page and we need to try again.
In particular, if we are relocating concurrently with aborting a
transaction, this can result in a crash like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 76 PID: 1411631 Comm: kworker/u322:5
Workqueue: events_unbound btrfs_reclaim_bgs_work
RIP: 0010:set_page_extent_mapped+0x20/0xb0
RSP: 0018:ffffc900516a7be8 EFLAGS: 00010246
RAX: ffffea009e851d08 RBX: ffffea009e0b1880 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffc900516a7b90 RDI: ffffea009e0b1880
RBP: 0000000003573000 R08: 0000000000000001 R09: ffff88c07fd2f3f0
R10: 0000000000000000 R11: 0000194754b575be R12: 0000000003572000
R13: 0000000003572fff R14: 0000000000100cca R15: 0000000005582fff
FS: 0000000000000000(0000) GS:ffff88c07fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000407d00f002 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
16h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: add intf release flow when usb disconnect MediaTek claim an special usb intr interface for ISO data transmission. The interface need to be released before unregistering hci device when usb disconnect. Removing BT usb dongle without properly releasing the interface may cause Kernel panic while unregister hci device. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix freeing of the HMB descriptor table The HMB descriptor table is sized to the maximum number of descriptors that could be used for a given device, but __nvme_alloc_host_mem could break out of the loop earlier on memory allocation failure and end up using less descriptors than planned for, which leads to an incorrect size passed to dma_free_coherent. In practice this was not showing up because the number of descriptors tends to be low and the dma coherent allocator always allocates and frees at least a page. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING In fscache_create_volume(), there is a missing memory barrier between the bit-clearing operation and the wake-up operation. This may cause a situation where, after a wake-up, the bit-clearing operation hasn't been detected yet, leading to an indefinite wait. The triggering process is as follows: [cookie1] [cookie2] [volume_work] fscache_perform_lookup fscache_create_volume fscache_perform_lookup fscache_create_volume fscache_create_volume_work cachefiles_acquire_volume clear_and_wake_up_bit test_and_set_bit test_and_set_bit goto maybe_wait goto no_wait In the above process, cookie1 and cookie2 has the same volume. When cookie1 enters the -no_wait- process, it will clear the bit and wake up the waiting process. If a barrier is missing, it may cause cookie2 to remain in the -wait- process indefinitely. In commit 3288666c7256 ("fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()"), barriers were added to similar operations in fscache_create_volume_work(), but fscache_create_volume() was missed. By combining the clear and wake operations into clear_and_wake_up_bit() to fix this issue. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: crypto: caam - Fix the pointer passed to caam_qi_shutdown() The type of the last parameter given to devm_add_action_or_reset() is "struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to "struct device *". Pass the correct parameter to devm_add_action_or_reset() so that the resources are released as expected. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ipv6: release nexthop on device removal The CI is hitting some aperiodic hangup at device removal time in the pmtu.sh self-test: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6 ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at dst_init+0x84/0x4a0 dst_alloc+0x97/0x150 ip6_dst_alloc+0x23/0x90 ip6_rt_pcpu_alloc+0x1e6/0x520 ip6_pol_route+0x56f/0x840 fib6_rule_lookup+0x334/0x630 ip6_route_output_flags+0x259/0x480 ip6_dst_lookup_tail.constprop.0+0x5c2/0x940 ip6_dst_lookup_flow+0x88/0x190 udp_tunnel6_dst_lookup+0x2a7/0x4c0 vxlan_xmit_one+0xbde/0x4a50 [vxlan] vxlan_xmit+0x9ad/0xf20 [vxlan] dev_hard_start_xmit+0x10e/0x360 __dev_queue_xmit+0xf95/0x18c0 arp_solicit+0x4a2/0xe00 neigh_probe+0xaa/0xf0 While the first suspect is the dst_cache, explicitly tracking the dst owing the last device reference via probes proved such dst is held by the nexthop in the originating fib6_info. Similar to commit f5b51fe804ec ("ipv6: route: purge exception on removal"), we need to explicitly release the originating fib info when disconnecting a to-be-removed device from a live ipv6 dst: move the fib6_info cleanup into ip6_dst_ifdown(). Tested running: ./pmtu.sh cleanup_ipv6_exception in a tight loop for more than 400 iterations with no spat, running an unpatched kernel I observed a splat every ~10 iterations. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dlm: fix dlm_recover_members refcount on error If dlm_recover_members() fails we don't drop the references of the previous created root_list that holds and keep all rsbs alive during the recovery. It might be not an unlikely event because ping_members() could run into an -EINTR if another recovery progress was triggered again. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() Hook "qed_ops->common->sb_init = qed_sb_init" does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb() Hook "qedi_ops->common->sb_init = qed_sb_init" does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem() When information such as info->screen_base is not ready, calling sh7760fb_free_mem() does not release memory correctly. Call dma_free_coherent() instead. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI: Fix reset_method_store() memory leak In reset_method_store(), a string is allocated via kstrndup() and assigned to the local "options". options is then used in with strsep() to find spaces: while ((name = strsep(&options, " ")) != NULL) { If there are no remaining spaces, then options is set to NULL by strsep(), so the subsequent kfree(options) doesn't free the memory allocated via kstrndup(). Fix by using a separate tmp_options to iterate with strsep() so options is preserved. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadlock in f2fs_record_stop_reason() syzbot reports deadlock issue of f2fs as below: ====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc3-syzkaller-00087-gc964ced77262 #0 Not tainted ------------------------------------------------------ kswapd0/79 is trying to acquire lock: ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_down_write fs/f2fs/f2fs.h:2199 [inline] ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_record_stop_reason+0x52/0x1d0 fs/f2fs/super.c:4068 but task is already holding lock: ffff88804bd92610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (sb_internal#2){.+.+}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write include/linux/fs.h:1716 [inline] sb_start_intwrite+0x4d/0x1c0 include/linux/fs.h:1899 f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842 evict+0x4e8/0x9b0 fs/inode.c:725 f2fs_evict_inode+0x1a4/0x15c0 fs/f2fs/inode.c:807 evict+0x4e8/0x9b0 fs/inode.c:725 dispose_list fs/inode.c:774 [inline] prune_icache_sb+0x239/0x2f0 fs/inode.c:963 super_cache_scan+0x38c/0x4b0 fs/super.c:223 do_shrink_slab+0x701/0x1160 mm/shrinker.c:435 shrink_slab+0x1093/0x14d0 mm/shrinker.c:662 shrink_one+0x43b/0x850 mm/vmscan.c:4818 shrink_many mm/vmscan.c:4879 [inline] lru_gen_shrink_node mm/vmscan.c:4957 [inline] shrink_node+0x3799/0x3de0 mm/vmscan.c:5937 kswapd_shrink_node mm/vmscan.c:6765 [inline] balance_pgdat mm/vmscan.c:6957 [inline] kswapd+0x1ca3/0x3700 mm/vmscan.c:7226 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #1 (fs_reclaim){+.+.}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __fs_reclaim_acquire mm/page_alloc.c:3834 [inline] fs_reclaim_acquire+0x88/0x130 mm/page_alloc.c:3848 might_alloc include/linux/sched/mm.h:318 [inline] prepare_alloc_pages+0x147/0x5b0 mm/page_alloc.c:4493 __alloc_pages_noprof+0x16f/0x710 mm/page_alloc.c:4722 alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265 alloc_pages_noprof mm/mempolicy.c:2345 [inline] folio_alloc_noprof+0x128/0x180 mm/mempolicy.c:2352 filemap_alloc_folio_noprof+0xdf/0x500 mm/filemap.c:1010 do_read_cache_folio+0x2eb/0x850 mm/filemap.c:3787 read_mapping_folio include/linux/pagemap.h:1011 [inline] f2fs_commit_super+0x3c0/0x7d0 fs/f2fs/super.c:4032 f2fs_record_stop_reason+0x13b/0x1d0 fs/f2fs/super.c:4079 f2fs_handle_critical_error+0x2ac/0x5c0 fs/f2fs/super.c:4174 f2fs_write_inode+0x35f/0x4d0 fs/f2fs/inode.c:785 write_inode fs/fs-writeback.c:1503 [inline] __writeback_single_inode+0x711/0x10d0 fs/fs-writeback.c:1723 writeback_single_inode+0x1f3/0x660 fs/fs-writeback.c:1779 sync_inode_metadata+0xc4/0x120 fs/fs-writeback.c:2849 f2fs_release_file+0xa8/0x100 fs/f2fs/file.c:1941 __fput+0x23f/0x880 fs/file_table.c:431 task_work_run+0x24f/0x310 kernel/task_work.c:228 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x168/0x370 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f ---truncated--- | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages() Fix an unwind issue in mlx5vf_add_migration_pages(). If a set of pages is allocated but fails to be added to the SG table, they need to be freed to prevent a memory leak. Any pages successfully added to the SG table will be freed as part of mlx5vf_free_data_buffer(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: apparmor: test: Fix memory leak for aa_unpack_strdup() The string allocated by kmemdup() in aa_unpack_strdup() is not freed and cause following memory leaks, free them to fix it. unreferenced object 0xffffff80c6af8a50 (size 8): comm "kunit_try_catch", pid 225, jiffies 4294894407 hex dump (first 8 bytes): 74 65 73 74 69 6e 67 00 testing. backtrace (crc 5eab668b): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000006e6c7776>] __kmalloc_node_track_caller_noprof+0x300/0x3e0 [<000000006870467c>] kmemdup_noprof+0x34/0x60 [<000000001176bb03>] aa_unpack_strdup+0xd0/0x18c [<000000008ecde918>] policy_unpack_test_unpack_strdup_with_null_name+0xf8/0x3ec [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80c2a29090 (size 8): comm "kunit_try_catch", pid 227, jiffies 4294894409 hex dump (first 8 bytes): 74 65 73 74 69 6e 67 00 testing. backtrace (crc 5eab668b): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000006e6c7776>] __kmalloc_node_track_caller_noprof+0x300/0x3e0 [<000000006870467c>] kmemdup_noprof+0x34/0x60 [<000000001176bb03>] aa_unpack_strdup+0xd0/0x18c [<0000000046a45c1a>] policy_unpack_test_unpack_strdup_with_name+0xd0/0x3c4 [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: rtc: check if __rtc_read_time was successful in rtc_timer_do_work() If the __rtc_read_time call fails,, the struct rtc_time tm; may contain uninitialized data, or an illegal date/time read from the RTC hardware. When calling rtc_tm_to_ktime later, the result may be a very large value (possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue, they will continually expire, may causing kernel softlockup. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: smb: Initialize cfid->tcon before performing network ops Avoid leaking a tcon ref when a lease break races with opening the cached directory. Processing the leak break might take a reference to the tcon in cached_dir_lease_break() and then fail to release the ref in cached_dir_offload_close, since cfid->tcon is still NULL. | 4.7 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c Add error pointer check after calling otx2_mbox_get_rsp(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c Adding error pointer check after calling otx2_mbox_get_rsp(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in cn10k.c Add error pointer check after calling otx2_mbox_get_rsp(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.c Add error pointer check after calling otx2_mbox_get_rsp(). | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. | 5.5 |
Medium |
|
11h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. | 5.5 |
Medium |
|
11h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix cpu stuck caused by printings during reset During reset, cmd to destroy resources such as qp, cq, and mr may fail, and error logs will be printed. When a large number of resources are destroyed, there will be lots of printings, and it may lead to a cpu stuck. Delete some unnecessary printings and replace other printing functions in these paths with the ratelimited version. | 5.5 |
Medium |
|
11h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Terminate the erratum_1386_microcode array The erratum_1386_microcode array requires an empty entry at the end. Otherwise x86_match_cpu_with_stepping() will continue iterate the array after it ended. Add an empty entry to erratum_1386_microcode to its end. | 7.1 |
High |
|
11h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Several fixes to bpf_msg_pop_data Several fixes to bpf_msg_pop_data, 1. In sk_msg_shift_left, we should put_page 2. if (len == 0), return early is better 3. pop the entire sk_msg (last == msg->sg.size) should be supported 4. Fix for the value of variable "a" 5. In sk_msg_shift_left, after shifting, i has already pointed to the next element. Addtional sk_msg_iter_var_next may result in BUG. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/smc: protect link down work from execute after lgr freed link down work may be scheduled before lgr freed but execute after lgr freed, which may result in crash. So it is need to hold a reference before shedule link down work, and put the reference after work executed or canceled. The relevant crash call stack as follows: list_del corruption. prev->next should be ffffb638c9c0fe20, but was 0000000000000000 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:51! invalid opcode: 0000 [#1] SMP NOPTI CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014 Workqueue: events smc_link_down_work [smc] RIP: 0010:__list_del_entry_valid.cold+0x31/0x47 RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086 RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000 RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38 R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002 R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0 FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: rwsem_down_write_slowpath+0x17e/0x470 smc_link_down_work+0x3c/0x60 [smc] process_one_work+0x1ac/0x350 worker_thread+0x49/0x2f0 ? rescuer_thread+0x360/0x360 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: fix incorrect IFH SRC_PORT field in ocelot_ifh_set_basic() Packets injected by the CPU should have a SRC_PORT field equal to the CPU port module index in the Analyzer block (ocelot->num_phys_ports). The blamed commit copied the ocelot_ifh_set_basic() call incorrectly from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling with "x", it calls with BIT_ULL(x), but the field is not a port mask, but rather a single port index. [ side note: this is the technical debt of code duplication :( ] The error used to be silent and doesn't appear to have other user-visible manifestations, but with new changes in the packing library, it now fails loudly as follows: ------------[ cut here ]------------ Cannot store 0x40 inside bits 46-43 - will truncate sja1105 spi2.0: xmit timed out WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198 sja1105 spi2.0: timed out polling for tstamp CPU: 1 UID: 0 PID: 102 Comm: felix_xmit Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605 Call trace: __pack+0x90/0x198 (P) __pack+0x90/0x198 (L) packing+0x78/0x98 ocelot_ifh_set_basic+0x260/0x368 ocelot_port_inject_frame+0xa8/0x250 felix_port_deferred_xmit+0x14c/0x258 kthread_worker_fn+0x134/0x350 kthread+0x114/0x138 The code path pertains to the ocelot switchdev driver and to the felix secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q. The messenger (packing) is not really to blame, so fix the original commit instead. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netdevsim: prevent bad user input in nsim_dev_health_break_write() If either a zero count or a large one is provided, kernel can crash. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ionic: Fix netdev notifier unregister on failure If register_netdev() fails, then the driver leaks the netdev notifier. Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix memory leak on last export_udmabuf() error path In export_udmabuf(), if dma_buf_fd() fails because the FD table is full, a dma_buf owning the udmabuf has already been created; but the error handling in udmabuf_create() will tear down the udmabuf without doing anything about the containing dma_buf. This leaves a dma_buf in memory that contains a dangling pointer; though that doesn't seem to lead to anything bad except a memory leak. Fix it by moving the dma_buf_fd() call out of export_udmabuf() so that we can give it different error handling. Note that the shape of this code changed a lot in commit 5e72b2b41a21 ("udmabuf: convert udmabuf driver to use folios"); but the memory leak seems to have existed since the introduction of udmabuf. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereference drm_mode_duplicate() could return NULL due to lack of memory, which will then call NULL pointer dereference. Add a check to prevent it. | 5.5 |
Medium |
|
08h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_direct_read_write() The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked and pages remain pinned if ceph_alloc_sparse_ext_map() fails. There is no need to delay the allocation of sparse_ext map until after the bvecs array is set up, so fix this by moving sparse_ext allocation a bit earlier. Also, make a similar adjustment in __ceph_sync_read() for consistency (a leak of the same kind in __ceph_sync_read() has been addressed differently). | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Avoid segmentation fault on module unload The segmentation fault happens because: During modprobe: 1. In igen6_probe(), igen6_pvt will be allocated with kzalloc() 2. In igen6_register_mci(), mci->pvt_info will point to &igen6_pvt->imc[mc] During rmmod: 1. In mci_release() in edac_mc.c, it will kfree(mci->pvt_info) 2. In igen6_remove(), it will kfree(igen6_pvt); Fix this issue by setting mci->pvt_info to NULL to avoid the double kfree. | 7.8 |
High |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix release of IRQ Kernel logs indicate an IRQ was double-freed. Pass correct device ID during IRQ release. [Dominique: remove confusing variable reset to 0] | 7.8 |
High |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Mark raw_tp arguments with PTR_MAYBE_NULL Arguments to a raw tracepoint are tagged as trusted, which carries the semantics that the pointer will be non-NULL. However, in certain cases, a raw tracepoint argument may end up being NULL. More context about this issue is available in [0]. Thus, there is a discrepancy between the reality, that raw_tp arguments can actually be NULL, and the verifier's knowledge, that they are never NULL, causing explicit NULL checks to be deleted, and accesses to such pointers potentially crashing the kernel. To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special case the dereference and pointer arithmetic to permit it, and allow passing them into helpers/kfuncs; these exceptions are made for raw_tp programs only. Ensure that we don't do this when ref_obj_id > 0, as in that case this is an acquired object and doesn't need such adjustment. The reason we do mask_raw_tp_trusted_reg logic is because other will recheck in places whether the register is a trusted_reg, and then consider our register as untrusted when detecting the presence of the PTR_MAYBE_NULL flag. To allow safe dereference, we enable PROBE_MEM marking when we see loads into trusted pointers with PTR_MAYBE_NULL. While trusted raw_tp arguments can also be passed into helpers or kfuncs where such broken assumption may cause issues, a future patch set will tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can already be passed into helpers and causes similar problems. Thus, they are left alone for now. It is possible that these checks also permit passing non-raw_tp args that are trusted PTR_TO_BTF_ID with null marking. In such a case, allowing dereference when pointer is NULL expands allowed behavior, so won't regress existing programs, and the case of passing these into helpers is the same as above and will be dealt with later. Also update the failure case in tp_btf_nullable selftest to capture the new behavior, as the verifier will no longer cause an error when directly dereference a raw tracepoint argument marked as __nullable. [0]: https://lore.kernel.org/bpf/[email protected] | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix looping of queued SG entries The dwc3_request->num_queued_sgs is decremented on completion. If a partially completed request is handled, then the dwc3_request->num_queued_sgs no longer reflects the total number of num_queued_sgs (it would be cleared). Correctly check the number of request SG entries remained to be prepare and queued. Failure to do this may cause null pointer dereference when accessing non-existent SG entry. | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the memory allocation issue in amdgpu_discovery_get_nps_info() Fix two issues with memory allocation in amdgpu_discovery_get_nps_info() for mem_ranges: - Add a check for allocation failure to avoid dereferencing a null pointer. - As suggested by Christophe, use kvcalloc() for memory allocation, which checks for multiplication overflow. Additionally, assign the output parameters nps_type and range_cnt after the kvcalloc() call to prevent modifying the output parameters in case of an error return. | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add NULL checks for all the kunit_kzalloc() in sound_kunit.c | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: fix recursive lock when verdict program return SK_PASS When the stream_verdict program returns SK_PASS, it places the received skb into its own receive queue, but a recursive lock eventually occurs, leading to an operating system deadlock. This issue has been present since v6.9. ''' sk_psock_strp_data_ready write_lock_bh(&sk->sk_callback_lock) strp_data_ready strp_read_sock read_sock -> tcp_read_sock strp_recv cb.rcv_msg -> sk_psock_strp_read # now stream_verdict return SK_PASS without peer sock assign __SK_PASS = sk_psock_map_verd(SK_PASS, NULL) sk_psock_verdict_apply sk_psock_skb_ingress_self sk_psock_skb_ingress_enqueue sk_psock_data_ready read_lock_bh(&sk->sk_callback_lock) <= dead lock ''' This topic has been discussed before, but it has not been fixed. Previous discussion: https://lore.kernel.org/all/[email protected] | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on node blkaddr in truncate_node() syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2534! RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534 Call Trace: truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909 f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288 f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856 evict+0x4e8/0x9b0 fs/inode.c:723 f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986 f2fs_create+0x357/0x530 fs/f2fs/namei.c:394 lookup_open fs/namei.c:3595 [inline] open_last_lookups fs/namei.c:3694 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3930 do_filp_open+0x235/0x490 fs/namei.c:3960 do_sys_openat2+0x13e/0x1d0 fs/open.c:1415 do_sys_open fs/open.c:1430 [inline] __do_sys_openat fs/open.c:1446 [inline] __se_sys_openat fs/open.c:1441 [inline] __x64_sys_openat+0x247/0x2a0 fs/open.c:1441 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534 The root cause is: on a fuzzed image, blkaddr in nat entry may be corrupted, then it will cause system panic when using it in f2fs_invalidate_blocks(), to avoid this, let's add sanity check on nat blkaddr in truncate_node(). | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio' If platform_get_resource_byname() fails and returns NULL because DT lacks an 'mmio' property for the MHI endpoint, dereferencing res->start will cause a NULL pointer access. Add a check to prevent it. [kwilczynski: error message update per the review feedback] [bhelgaas: commit log] | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport Since transport->sock has been set to NULL during reset transport, XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request() to dereference the transport->sock that has been set to NULL. | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: musb: Fix hardware lockup on first Rx endpoint request There is a possibility that a request's callback could be invoked from usb_ep_queue() (call trace below, supplemented with missing calls): req->complete from usb_gadget_giveback_request (drivers/usb/gadget/udc/core.c:999) usb_gadget_giveback_request from musb_g_giveback (drivers/usb/musb/musb_gadget.c:147) musb_g_giveback from rxstate (drivers/usb/musb/musb_gadget.c:784) rxstate from musb_ep_restart (drivers/usb/musb/musb_gadget.c:1169) musb_ep_restart from musb_ep_restart_resume_work (drivers/usb/musb/musb_gadget.c:1176) musb_ep_restart_resume_work from musb_queue_resume_work (drivers/usb/musb/musb_core.c:2279) musb_queue_resume_work from musb_gadget_queue (drivers/usb/musb/musb_gadget.c:1241) musb_gadget_queue from usb_ep_queue (drivers/usb/gadget/udc/core.c:300) According to the docstring of usb_ep_queue(), this should not happen: "Note that @req's ->complete() callback must never be called from within usb_ep_queue() as that can create deadlock situations." In fact, a hardware lockup might occur in the following sequence: 1. The gadget is initialized using musb_gadget_enable(). 2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an interrupt. 3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an empty queue (next_request() returns NULL). The interrupt flag has already been cleared by the glue layer handler, but the RXPKTRDY flag remains set. 4. The first request is enqueued using usb_ep_queue(), leading to the call of req->complete(), as shown in the call trace above. 5. If the callback enables IRQs and another packet is waiting, step (3) repeats. The request queue is empty because usb_g_giveback() removes the request before invoking the callback. 6. The endpoint remains locked up, as the interrupt triggered by hardware setting the RXPKTRDY flag has been handled, but the flag itself remains set. For this scenario to occur, it is only necessary for IRQs to be enabled at some point during the complete callback. This happens with the USB Ethernet gadget, whose rx_complete() callback calls netif_rx(). If called in the task context, netif_rx() disables the bottom halves (BHs). When the BHs are re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The gadget itself is initialized at module load (or at boot if built-in), but the first request is enqueued when the network interface is brought up, triggering rx_complete() in the task context via ioctl(). If a packet arrives while the interface is down, it can prevent the interface from receiving any further packets from the USB host. The situation is quite complicated with many parties involved. This particular issue can be resolved in several possible ways: 1. Ensure that callbacks never enable IRQs. This would be difficult to enforce, as discovering how netif_rx() interacts with interrupts was already quite challenging and u_ether is not the only function driver. Similar "bugs" could be hidden in other drivers as well. 2. Disable MUSB interrupts in musb_g_giveback() before calling the callback and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(), for example). This would ensure that MUSB interrupts are not handled during the callback, even if IRQs are enabled. In fact, it would allow IRQs to be enabled when releasing the lock. However, this feels like an inelegant hack. 3. Modify the interrupt handler to clear the RXPKTRDY flag if the request queue is empty. While this approach also feels like a hack, it wastes CPU time by attempting to handle incoming packets when the software is not ready to process them. 4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart(). This ensures that the hardware can receive packets when there is at least one request in the queue. Once I ---truncated--- | 5.5 |
Medium |
|
09h46 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: irqchip/riscv-aplic: Prevent crash when MSI domain is missing If the APLIC driver is probed before the IMSIC driver, the parent MSI domain will be missing, which causes a NULL pointer dereference in msi_create_device_irq_domain(). Avoid this by deferring probe until the parent MSI domain is available. Use dev_err_probe() to avoid printing an error message when returning -EPROBE_DEFER. | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU protection. But it is possible to attach a non-sleepable BPF program to a uprobe, and non-sleepable BPF programs are freed via normal RCU (see __bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal RCU grace period does not imply a tasks-trace-RCU grace period. Fix it by explicitly waiting for a tasks-trace-RCU grace period after removing the attachment of a bpf_prog to a perf_event. | 7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
virtio_net: correct netdev_tx_reset_queue() invocation point
When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
cases for virtio-net.
This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.
netdev_tx_reset_queue() can actually be dropped from virtnet_open path;
the device is not stopped in any case. For BQL core part, it's just like
traffic nearly ceases to exist for some period. For stall detector added
to BQL, even if virtnet_close could somehow lead to some TX completions
delayed for long, followed by virtnet_open, we can just take it as stall
as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector
based on BQL"). Note also that users can still reset stall_max via sysfs.
So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This
eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now
explicitly required in freeze/restore path. This patch adds it to
immediately after free_unused_bufs(), following the rule of thumb:
netdev_tx_reset_queue() should follow any SKB freeing not followed by
netdev_tx_completed_queue(). This seems the most consistent and
streamlined approach, and now netdev_tx_reset_queue() runs whenever
free_unused_bufs() is done.
[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Do not call pmd dtor on vmemmap page table teardown
The vmemmap's, which is used for RV64 with SPARSEMEM_VMEMMAP, page
tables are populated using pmd (page middle directory) hugetables.
However, the pmd allocation is not using the generic mechanism used by
the VMA code (e.g. pmd_alloc()), or the RISC-V specific
create_pgd_mapping()/alloc_pmd_late(). Instead, the vmemmap page table
code allocates a page, and calls vmemmap_set_pmd(). This results in
that the pmd ctor is *not* called, nor would it make sense to do so.
Now, when tearing down a vmemmap page table pmd, the cleanup code
would unconditionally, and incorrectly call the pmd dtor, which
results in a crash (best case).
This issue was found when running the HMM selftests:
| tools/testing/selftests/mm# ./test_hmm.sh smoke
| ... # when unloading the test_hmm.ko module
| page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10915b
| flags: 0x1000000000000000(node=0|zone=1)
| raw: 1000000000000000 0000000000000000 dead000000000122 0000000000000000
| raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
| page dumped because: VM_BUG_ON_PAGE(ptdesc->pmd_huge_pte)
| ------------[ cut here ]------------
| kernel BUG at include/linux/mm.h:3080!
| Kernel BUG [#1]
| Modules linked in: test_hmm(-) sch_fq_codel fuse drm drm_panel_orientation_quirks backlight dm_mod
| CPU: 1 UID: 0 PID: 514 Comm: modprobe Tainted: G W 6.12.0-00982-gf2a4f1682d07 #2
| Tainted: [W]=WARN
| Hardware name: riscv-virtio qemu/qemu, BIOS 2024.10 10/01/2024
| epc : remove_pgd_mapping+0xbec/0x1070
| ra : remove_pgd_mapping+0xbec/0x1070
| epc : ffffffff80010a68 ra : ffffffff80010a68 sp : ff20000000a73940
| gp : ffffffff827b2d88 tp : ff6000008785da40 t0 : ffffffff80fbce04
| t1 : 0720072007200720 t2 : 706d756420656761 s0 : ff20000000a73a50
| s1 : ff6000008915cff8 a0 : 0000000000000039 a1 : 0000000000000008
| a2 : ff600003fff0de20 a3 : 0000000000000000 a4 : 0000000000000000
| a5 : 0000000000000000 a6 : c0000000ffffefff a7 : ffffffff824469b8
| s2 : ff1c0000022456c0 s3 : ff1ffffffdbfffff s4 : ff6000008915c000
| s5 : ff6000008915c000 s6 : ff6000008915c000 s7 : ff1ffffffdc00000
| s8 : 0000000000000001 s9 : ff1ffffffdc00000 s10: ffffffff819a31f0
| s11: ffffffffffffffff t3 : ffffffff8000c950 t4 : ff60000080244f00
| t5 : ff60000080244000 t6 : ff20000000a73708
| status: 0000000200000120 badaddr: ffffffff80010a68 cause: 0000000000000003
| [ |
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Fix UAF in blkcg_unpin_online()
blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To
walk up, it uses blkcg_parent(blkcg) but it was calling that after
blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the
following UAF:
==================================================================
BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270
Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117
CPU: 9 UID: 0 PID: 117 Comm: kworker/9:1 Not tainted 6.13.0-rc1-work-00182-gb8f52214c61a-dirty #48
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
|
7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gpio: graniterapids: Fix vGPIO driver crash Move setting irq_chip.name from probe() function to the initialization of "irq_chip" struct in order to fix vGPIO driver crash during bootup. Crash was caused by unauthorized modification of irq_chip.name field where irq_chip struct was initialized as const. This behavior is a consequence of suboptimal implementation of gpio_irq_chip_set_chip(), which should be changed to avoid casting away const qualifier. Crash log: BUG: unable to handle page fault for address: ffffffffc0ba81c0 /#PF: supervisor write access in kernel mode /#PF: error_code(0x0003) - permissions violation CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1 Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024 RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids] | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68 | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Remove cache tags before disabling ATS
The current implementation removes cache tags after disabling ATS,
leading to potential memory leaks and kernel crashes. Specifically,
CACHE_TAG_DEVTLB type cache tags may still remain in the list even
after the domain is freed, causing a use-after-free condition.
This issue really shows up when multiple VFs from different PFs
passed through to a single user-space process via vfio-pci. In such
cases, the kernel may crash with kernel messages like:
BUG: kernel NULL pointer dereference, address: 0000000000000014
PGD 19036a067 P4D 1940a3067 PUD 136c9b067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 74 UID: 0 PID: 3183 Comm: testCli Not tainted 6.11.9 #2
RIP: 0010:cache_tag_flush_range+0x9b/0x250
Call Trace:
|
7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix NULL pointer dereference in capture_engine When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d) | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix race between element replace and close()
Element replace (with a socket different from the one stored) may race
with socket's close() link popping & unlinking. __sock_map_delete()
unconditionally unrefs the (wrong) element:
// set map[0] = s0
map_update_elem(map, 0, s0)
// drop fd of s0
close(s0)
sock_map_close()
lock_sock(sk) (s0!)
sock_map_remove_links(sk)
link = sk_psock_link_pop()
sock_map_unlink(sk, link)
sock_map_delete_from_link
// replace map[0] with s1
map_update_elem(map, 0, s1)
sock_map_update_elem
(s1!) lock_sock(sk)
sock_map_update_common
psock = sk_psock(sk)
spin_lock(&stab->lock)
osk = stab->sks[idx]
sock_map_add_link(..., &stab->sks[idx])
sock_map_unref(osk, &stab->sks[idx])
psock = sk_psock(osk)
sk_psock_put(sk, psock)
if (refcount_dec_and_test(&psock))
sk_psock_drop(sk, psock)
spin_unlock(&stab->lock)
unlock_sock(sk)
__sock_map_delete
spin_lock(&stab->lock)
sk = *psk // s1 replaced s0; sk == s1
if (!sk_test || sk_test == sk) // sk_test (s0) != sk (s1); no branch
sk = xchg(psk, NULL)
if (sk)
sock_map_unref(sk, psk) // unref s1; sks[idx] will dangle
psock = sk_psock(sk)
sk_psock_put(sk, psock)
if (refcount_dec_and_test())
sk_psock_drop(sk, psock)
spin_unlock(&stab->lock)
release_sock(sk)
Then close(map) enqueues bpf_map_free_deferred, which finally calls
sock_map_free(). This results in some refcount_t warnings along with
a KASAN splat [1].
Fix __sock_map_delete(), do not allow sock_map_unref() on elements that
may have been replaced.
[1]:
BUG: KASAN: slab-use-after-free in sock_map_free+0x10e/0x330
Write of size 4 at addr ffff88811f5b9100 by task kworker/u64:12/1063
CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Not tainted 6.12.0+ #125
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
Workqueue: events_unbound bpf_map_free_deferred
Call Trace:
|
7 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
Since the netlink attribute range validation provides inclusive
checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be
IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one.
One crash stack for demonstration:
==================================================================
BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939
Read of size 6 at addr 001102080000000c by task fuzzer.386/9508
CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2
Call Trace:
|
7.1 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl Fix an issue detected by syzbot with KASAN: BUG: KASAN: vmalloc-out-of-bounds in cmd_to_func drivers/acpi/nfit/ core.c:416 [inline] BUG: KASAN: vmalloc-out-of-bounds in acpi_nfit_ctl+0x20e8/0x24a0 drivers/acpi/nfit/core.c:459 The issue occurs in cmd_to_func when the call_pkg->nd_reserved2 array is accessed without verifying that call_pkg points to a buffer that is appropriately sized as a struct nd_cmd_pkg. This can lead to out-of-bounds access and undefined behavior if the buffer does not have sufficient space. To address this, a check was added in acpi_nfit_ctl() to ensure that buf is not NULL and that buf_len is less than sizeof(*call_pkg) before accessing it. This ensures safe access to the members of call_pkg, including the nd_reserved2 array. | 7.1 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, prevent potential error pointer dereference The dr_domain_add_vport_cap() function generally returns NULL on error but sometimes we want it to return ERR_PTR(-EBUSY) so the caller can retry. The problem here is that "ret" can be either -EBUSY or -ENOMEM and if it's and -ENOMEM then the error pointer is propogated back and eventually dereferenced in dr_ste_v0_build_src_gvmi_qpn_tag(). | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: lapb: increase LAPB_HEADER_LEN
It is unclear if net/lapb code is supposed to be ready for 8021q.
We can at least avoid crashes like the following :
skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282
RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600
RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000
RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60
R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140
R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016
FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: defer final 'struct net' free in netns dismantle
Ilya reported a slab-use-after-free in dst_destroy [1]
Issue is in xfrm6_net_init() and xfrm4_net_init() :
They copy xfrm[46]_dst_ops_template into net->xfrm.xfrm[46]_dst_ops.
But net structure might be freed before all the dst callbacks are
called. So when dst_destroy() calls later :
if (dst->ops->destroy)
dst->ops->destroy(dst);
dst->ops points to the old net->xfrm.xfrm[46]_dst_ops, which has been freed.
See a relevant issue fixed in :
ac888d58869b ("net: do not delay dst_entries_add() in dst_release()")
A fix is to queue the 'struct net' to be freed after one
another cleanup_net() round (and existing rcu_barrier())
[1]
BUG: KASAN: slab-use-after-free in dst_destroy (net/core/dst.c:112)
Read of size 8 at addr ffff8882137ccab0 by task swapper/37/0
Dec 03 05:46:18 kernel:
CPU: 37 UID: 0 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 6.12.0 #67
Hardware name: Red Hat KVM/RHEL, BIOS 1.16.1-1.el9 04/01/2014
Call Trace:
|
7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Avoid WARN() for symlink errors Using WARN() for showing the error of symlink creations don't give more information than telling that something goes wrong, since the usual code path is a lregister callback from each control element creation. More badly, the use of WARN() rather confuses fuzzer as if it were serious issues. This patch downgrades the warning messages to use the normal dev_err() instead of WARN(). For making it clearer, add the function name to the prefix, too. | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix aggregation ID mask to prevent oops on 5760X chips
The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of
the previous generation (5750X or P5). However, the aggregation ID
fields in the completion structures on P7 have been redefined from
16 bits to 12 bits. The freed up 4 bits are redefined for part of the
metadata such as the VLAN ID. The aggregation ID mask was not modified
when adding support for P7 chips. Including the extra 4 bits for the
aggregation ID can potentially cause the driver to store or fetch the
packet header of GRO/LRO packets in the wrong TPA buffer. It may hit
the BUG() condition in __skb_pull() because the SKB contains no valid
packet header:
kernel BUG at include/linux/skbuff.h:2766!
Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022
RIP: 0010:eth_type_trans+0xda/0x140
Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48
RSP: 0018:ff615003803fcc28 EFLAGS: 00010283
RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040
RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000
RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001
R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0
R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000
FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is not safe since for the most part entries fetched this way shall be treated as rcu_dereference: Note that the value returned by rcu_dereference() is valid only within the enclosing RCU read-side critical section [1]_. For example, the following is **not** legal:: rcu_read_lock(); p = rcu_dereference(head.next); rcu_read_unlock(); x = p->address; /* BUG!!! */ rcu_read_lock(); y = p->data; /* BUG!!! */ rcu_read_unlock(); | 5.5 |
Medium |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
|
7.8 |
High |
|
15h06 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/reg_sr: Remove register pool That pool implementation doesn't really work: if the krealloc happens to move the memory and return another address, the entries in the xarray become invalid, leading to use-after-free later: BUG: KASAN: slab-use-after-free in xe_reg_sr_apply_mmio+0x570/0x760 [xe] Read of size 4 at addr ffff8881244b2590 by task modprobe/2753 Allocated by task 2753: kasan_save_stack+0x39/0x70 kasan_save_track+0x14/0x40 kasan_save_alloc_info+0x37/0x60 __kasan_kmalloc+0xc3/0xd0 __kmalloc_node_track_caller_noprof+0x200/0x6d0 krealloc_noprof+0x229/0x380 Simplify the code to fix the bug. A better pooling strategy may be added back later if needed. (cherry picked from commit e5283bd4dfecbd3335f43b62a68e24dae23f59e4) | 7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: can: hi311x: hi3110_can_ist(): fix potential use-after-free The commit a22bd630cfff ("can: hi311x: do not report txerr and rxerr during bus-off") removed the reporting of rxerr and txerr even in case of correct operation (i. e. not bus-off). The error count information added to the CAN frame after netif_rx() is a potential use after free, since there is no guarantee that the skb is in the same state. It might be freed or reused. Fix the issue by postponing the netif_rx() call in case of txerr and rxerr reporting. | 7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: fix LED ID check in led_tg_check()
Syzbot has reported the following BUG detected by KASAN:
BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70
Read of size 1 at addr ffff8881022da0c8 by task repro/5879
...
Call Trace:
|
7.1 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: enetc: Do not configure preemptible TCs if SIs do not support Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs() to configure preemptible TCs. However, only PF is able to configure preemptible TCs. Because only PF has related registers, while VF does not have these registers. So for VF, its hw->port pointer is NULL. Therefore, VF will access an invalid pointer when accessing a non-existent register, which will cause a crash issue. The simplified log is as follows. root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \ mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1 [ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00 [ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400 [ 187.511140] Call trace: [ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.518918] enetc_setup_tc_mqprio+0x180/0x214 [ 187.523374] enetc_vf_setup_tc+0x1c/0x30 [ 187.527306] mqprio_enable_offload+0x144/0x178 [ 187.531766] mqprio_init+0x3ec/0x668 [ 187.535351] qdisc_create+0x15c/0x488 [ 187.539023] tc_modify_qdisc+0x398/0x73c [ 187.542958] rtnetlink_rcv_msg+0x128/0x378 [ 187.547064] netlink_rcv_skb+0x60/0x130 [ 187.550910] rtnetlink_rcv+0x18/0x24 [ 187.554492] netlink_unicast+0x300/0x36c [ 187.558425] netlink_sendmsg+0x1a8/0x420 [ 187.606759] ---[ end trace 0000000000000000 ]--- In addition, some PFs also do not support configuring preemptible TCs, such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs, but we should prevent these PFs from accessing these unimplemented registers. | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: hsr: avoid potential out-of-bound access in fill_frame_info() syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one. Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case. BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606 __dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: Fix icmp host relookup triggering ip_rt_bug
arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is:
WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
|
5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid possible NULL deref in modify_prefix_route()
syzbot found a NULL deref [1] in modify_prefix_route(), caused by one
fib6_info without a fib6_table pointer set.
This can happen for net->ipv6.fib6_null_entry
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 UID: 0 PID: 5837 Comm: syz-executor888 Not tainted 6.12.0-syzkaller-09567-g7eef7e306d3c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__lock_acquire+0xe4/0x3c40 kernel/locking/lockdep.c:5089
Code: 08 84 d2 0f 85 15 14 00 00 44 8b 0d ca 98 f5 0e 45 85 c9 0f 84 b4 0e 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 96 2c 00 00 49 8b 04 24 48 3d a0 07 7f 93 0f 84
RSP: 0018:ffffc900035d7268 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000006 RSI: 1ffff920006bae5f RDI: 0000000000000030
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
R10: ffffffff90608e17 R11: 0000000000000001 R12: 0000000000000030
R13: ffff888036334880 R14: 0000000000000000 R15: 0000000000000000
FS: 0000555579e90380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc59cc4278 CR3: 0000000072b54000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dccp: Fix memory leak in dccp_feat_change_recv If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free of kernel socket in cleanup_bearer(). syzkaller reported a use-after-free of UDP kernel socket in cleanup_bearer() without repro. [0][1] When bearer_disable() calls tipc_udp_disable(), cleanup of the UDP kernel socket is deferred by work calling cleanup_bearer(). tipc_exit_net() waits for such works to finish by checking tipc_net(net)->wq_count. However, the work decrements the count too early before releasing the kernel socket, unblocking cleanup_net() and resulting in use-after-free. Let's move the decrement after releasing the socket in cleanup_bearer(). [0]: ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at sk_alloc+0x438/0x608 inet_create+0x4c8/0xcb0 __sock_create+0x350/0x6b8 sock_create_kern+0x58/0x78 udp_sock_create4+0x68/0x398 udp_sock_create+0x88/0xc8 tipc_udp_enable+0x5e8/0x848 __tipc_nl_bearer_enable+0x84c/0xed8 tipc_nl_bearer_enable+0x38/0x60 genl_family_rcv_msg_doit+0x170/0x248 genl_rcv_msg+0x400/0x5b0 netlink_rcv_skb+0x1dc/0x398 genl_rcv+0x44/0x68 netlink_unicast+0x678/0x8b0 netlink_sendmsg+0x5e4/0x898 ____sys_sendmsg+0x500/0x830 [1]: BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline] BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 udp_hashslot include/net/udp.h:85 [inline] udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489 __sock_release net/socket.c:658 [inline] sock_release+0xa0/0x210 net/socket.c:686 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_free_hook mm/slub.c:2269 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x207/0xc40 mm/slub.c:4682 net_free net/core/net_namespace.c:454 [inline] cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: events cleanup_bearer | 7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/smc: fix LGR and link use-after-free issue We encountered a LGR/link use-after-free issue, which manifested as the LGR/link refcnt reaching 0 early and entering the clear process, making resource access unsafe. refcount_t: addition on 0; use-after-free. WARNING: CPU: 14 PID: 107447 at lib/refcount.c:25 refcount_warn_saturate+0x9c/0x140 Workqueue: events smc_lgr_terminate_work [smc] Call trace: refcount_warn_saturate+0x9c/0x140 __smc_lgr_terminate.part.45+0x2a8/0x370 [smc] smc_lgr_terminate_work+0x28/0x30 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 or refcount_t: underflow; use-after-free. WARNING: CPU: 6 PID: 93140 at lib/refcount.c:28 refcount_warn_saturate+0xf0/0x140 Workqueue: smc_hs_wq smc_listen_work [smc] Call trace: refcount_warn_saturate+0xf0/0x140 smcr_link_put+0x1cc/0x1d8 [smc] smc_conn_free+0x110/0x1b0 [smc] smc_conn_abort+0x50/0x60 [smc] smc_listen_find_device+0x75c/0x790 [smc] smc_listen_work+0x368/0x8a0 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 It is caused by repeated release of LGR/link refcnt. One suspect is that smc_conn_free() is called repeatedly because some smc_conn_free() from server listening path are not protected by sock lock. e.g. Calls under socklock | smc_listen_work ------------------------------------------------------- lock_sock(sk) | smc_conn_abort smc_conn_free | \- smc_conn_free \- smcr_link_put | \- smcr_link_put (duplicated) release_sock(sk) So here add sock lock protection in smc_listen_work() path, making it exclusive with other connection operations. | 7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: avoid potential UAF in default_operstate()
syzbot reported an UAF in default_operstate() [1]
Issue is a race between device and netns dismantles.
After calling __rtnl_unlock() from netdev_run_todo(),
we can not assume the netns of each device is still alive.
Make sure the device is not in NETREG_UNREGISTERED state,
and add an ASSERT_RTNL() before the call to
__dev_get_by_index().
We might move this ASSERT_RTNL() in __dev_get_by_index()
in the future.
[1]
BUG: KASAN: slab-use-after-free in __dev_get_by_index+0x5d/0x110 net/core/dev.c:852
Read of size 8 at addr ffff888043eba1b0 by task syz.0.0/5339
CPU: 0 UID: 0 PID: 5339 Comm: syz.0.0 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
|
7.8 |
High |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gpio: grgpio: Add NULL check in grgpio_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in grgpio_probe is not checked. Add NULL check in grgpio_probe, to handle kernel NULL pointer dereference error. | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix the memleak while create new ctrl failed Now while we create new ctrl failed, we have not free the tagset occupied by admin_q, here try to fix it. | 5.5 |
Medium |
|
15h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release(). | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix when get product name maybe null pointer Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 ---truncated--- | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read An offset from client could be a negative value, It could lead to an out-of-bounds read from the stream_buf. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf. | 7.1 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Write in ksmbd_vfs_stream_write An offset from client could be a negative value, It could allows to write data outside the bounds of the allocated buffer. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx] | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: sysfs: Prevent div by zero Prevent a division by 0 when monitoring is not enabled. | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Cancel RTC work during ufshcd_remove() Currently, RTC work is only cancelled during __ufshcd_wl_suspend(). When ufshcd is removed in ufshcd_remove(), RTC work is not cancelled. Due to this, any further trigger of the RTC work after ufshcd_remove() would result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 00000000000002a4 Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c pm_runtime_get_if_active+0x24/0xb4 ufshcd_rtc_work+0x124/0x19c process_scheduled_works+0x18c/0x2d8 worker_thread+0x144/0x280 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Since RTC work accesses the ufshcd internal structures, it should be cancelled when ufshcd is removed. So do that in ufshcd_remove(), as per the order in ufshcd_init(). | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: qcom: Only free platform MSIs when ESI is enabled Otherwise, it will result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 platform_device_msi_free_irqs_all+0x14/0x20 ufs_qcom_remove+0x34/0x48 [ufs_qcom] platform_remove+0x28/0x44 device_remove+0x4c/0x80 device_release_driver_internal+0xd8/0x178 driver_detach+0x50/0x9c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 ufs_qcom_pltform_exit+0x18/0xb94 [ufs_qcom] __arm64_sys_delete_module+0x180/0x260 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xdc el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194 | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: gpcv2: Adjust delay after power up handshake The udelay(5) is not enough, sometimes below kernel panic still be triggered: [ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt [ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1 [ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT) [ 4.012985] Call trace: [...] [ 4.013029] arm64_serror_panic+0x64/0x70 [ 4.013034] do_serror+0x3c/0x70 [ 4.013039] el1h_64_error_handler+0x30/0x54 [ 4.013046] el1h_64_error+0x64/0x68 [ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48 [ 4.013059] __genpd_runtime_resume+0x30/0x80 [ 4.013066] genpd_runtime_resume+0x114/0x29c [ 4.013073] __rpm_callback+0x48/0x1e0 [ 4.013079] rpm_callback+0x68/0x80 [ 4.013084] rpm_resume+0x3bc/0x6a0 [ 4.013089] __pm_runtime_resume+0x50/0x9c [ 4.013095] pm_runtime_get_suppliers+0x60/0x8c [ 4.013101] __driver_probe_device+0x4c/0x14c [ 4.013108] driver_probe_device+0x3c/0x120 [ 4.013114] __driver_attach+0xc4/0x200 [ 4.013119] bus_for_each_dev+0x7c/0xe0 [ 4.013125] driver_attach+0x24/0x30 [ 4.013130] bus_add_driver+0x110/0x240 [ 4.013135] driver_register+0x68/0x124 [ 4.013142] __platform_driver_register+0x24/0x30 [ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma] [ 4.013163] do_one_initcall+0x60/0x1e0 [ 4.013168] do_init_module+0x5c/0x21c [ 4.013175] load_module+0x1a98/0x205c [ 4.013181] init_module_from_file+0x88/0xd4 [ 4.013187] __arm64_sys_finit_module+0x258/0x350 [ 4.013194] invoke_syscall.constprop.0+0x50/0xe0 [ 4.013202] do_el0_svc+0xa8/0xe0 [ 4.013208] el0_svc+0x3c/0x140 [ 4.013215] el0t_64_sync_handler+0x120/0x12c [ 4.013222] el0t_64_sync+0x190/0x194 [ 4.013228] SMP: stopping secondary CPUs The correct way is to wait handshake, but it needs BUS clock of BLK-CTL be enabled, which is in separate driver. So delay is the only option here. The udelay(10) is a data got by experiment. | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU Commit 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU") adds functionality that architectures can use to optionally allocate and build cacheinfo early during boot. Commit 6539cffa9495 ("cacheinfo: Add arch specific early level initializer") lets secondary CPUs correct (and reallocate memory) cacheinfo data if needed. If the early build functionality is not used and cacheinfo does not need correction, memory for cacheinfo is never allocated. x86 does not use the early build functionality. Consequently, during the cacheinfo CPU hotplug callback, last_level_cache_is_valid() attempts to dereference a NULL pointer: BUG: kernel NULL pointer dereference, address: 0000000000000100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not present page PGD 0 P4D 0 Oops: 0000 [#1] PREEPMT SMP NOPTI CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1 RIP: 0010: last_level_cache_is_valid+0x95/0xe0a Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback if not done earlier. Moreover, before determining the validity of the last-level cache info, ensure that it has been allocated. Simply checking for non-zero cache_leaves() is not sufficient, as some architectures (e.g., Intel processors) have non-zero cache_leaves() before allocation. Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size(). This function iterates over all online CPUs. However, a CPU may have come online recently, but its cacheinfo may not have been allocated yet. While here, remove an unnecessary indentation in allocate_cache_info(). [ bp: Massage. ] | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bpf: fix OOB devmap writes when deleting elements
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[ 160.731662] #PF: supervisor read access in kernel mode
[ 160.736876] #PF: error_code(0x0000) - not-present page
[ 160.742095] PGD 0 P4D 0
[ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 160.767642] Workqueue: events_unbound bpf_map_free_deferred
[ 160.773308] RIP: 0010:dev_map_free+0x77/0x170
[ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.874092] PKRU: 55555554
[ 160.876847] Call Trace:
[ 160.879338] |
7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
xsk: fix OOB map writes when deleting elements
Jordy says:
"
In the xsk_map_delete_elem function an unsigned integer
(map->max_entries) is compared with a user-controlled signed integer
(k). Due to implicit type conversion, a large unsigned value for
map->max_entries can bypass the intended bounds check:
if (k >= map->max_entries)
return -EINVAL;
This allows k to hold a negative value (between -2147483648 and -2),
which is then used as an array index in m->xsk_map[k], which results
in an out-of-bounds access.
spin_lock_bh(&m->lock);
map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry
old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write
if (old_xs)
xsk_map_sock_delete(old_xs, map_entry);
spin_unlock_bh(&m->lock);
The xchg operation can then be used to cause an out-of-bounds write.
Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead
to further memory corruption.
"
It indeed results in following splat:
[76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108
[76612.904330] #PF: supervisor write access in kernel mode
[76612.909639] #PF: error_code(0x0002) - not-present page
[76612.914855] PGD 0 P4D 0
[76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP
[76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470
[76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60
[76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31
[76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246
[76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000
[76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000
[76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007
[76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8
[76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0
[76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000
[76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0
[76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[76613.041086] PKRU: 55555554
[76613.043842] Call Trace:
[76613.046331] |
7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sched/numa: fix memory leak due to the overwritten vma->numab_state
[Problem Description]
When running the hackbench program of LTP, the following memory leak is
reported by kmemleak.
# /opt/ltp/testcases/bin/hackbench 20 thread 1000
Running with 20*40 (== 800) tasks.
# dmesg | grep kmemleak
...
kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888cd8ca2c40 (size 64):
comm "hackbench", pid 17142, jiffies 4299780315
hex dump (first 32 bytes):
ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc bff18fd4):
[ |
5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM
We currently assume that there is at least one VMA in a MM, which isn't
true.
So we might end up having find_vma() return NULL, to then de-reference
NULL. So properly handle find_vma() returning NULL.
This fixes the report:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline]
RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194
Code: ...
RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000
RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044
RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1
R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003
R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8
FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create'
An issue was identified in the dcn21_link_encoder_create function where
an out-of-bounds access could occur when the hpd_source index was used
to reference the link_enc_hpd_regs array. This array has a fixed size
and the index was not being checked against the array's bounds before
accessing it.
This fix adds a conditional check to ensure that the hpd_source index is
within the valid range of the link_enc_hpd_regs array. If the index is
out of bounds, the function now returns NULL to prevent undefined
behavior.
References:
[ 65.920507] ------------[ cut here ]------------
[ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29
[ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]'
[ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13
[ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020
[ 65.920527] Call Trace:
[ 65.920529] |
7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() bt_sock_alloc() allocates the sk object and attaches it to the provided sock object. On error l2cap_sock_alloc() frees the sk object, but the dangling pointer is still attached to the sock object, which may create use-after-free in other code. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc(). | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: af_can: do not leave a dangling sk pointer in can_create() On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: avoid NULL pointer error during sdio remove When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call trace: ath10k_sdio_remove ->ath10k_core_unregister …… ->ath10k_core_stop ->ath10k_hif_stop ->ath10k_sdio_irq_disable ->ath10k_hif_power_down ->del_timer_sync(&ar_sdio->sleep_timer) ->ath10k_core_destroy ->ath10k_mac_destroy ->ieee80211_free_hw ->wiphy_free …… ->wiphy_dev_release ->destroy_workqueue Need to call destroy_workqueue() before ath10k_core_destroy(), free the work queue buffer first and then free pointer of work queue by ath10k_core_destroy(). This order matches the error path order in ath10k_sdio_probe(). No work will be queued on sdio workqueue between it is destroyed and ath10k_core_destroy() is called. Based on the call_stack above, the reason is: Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and ath10k_sdio_irq_disable() will queue work on sdio workqueue. Sleep timer will be deleted before ath10k_core_destroy() in ath10k_hif_power_down(). ath10k_sdio_irq_disable() only be called in ath10k_hif_stop(). ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif bus, so ath10k_sdio_hif_tx_sg() won't be called anymore. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189 | 5.5 |
Medium |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: array-index-out-of-bounds fix in dtReadFirst The value of stbl can be sometimes out of bounds due to a bad filesystem. Added a check with appopriate return of error code in that case. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree When the value of lp is 0 at the beginning of the for loop, it will become negative in the next assignment and we should bail out. | 7.8 |
High |
|
14h51 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory. | 5.5 |
Medium |
|
14h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Create all dump files during debugfs initialization For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping. | 5.5 |
Medium |
|
14h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: leds: class: Protect brightness_show() with led_cdev->led_access mutex There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free in btrfs_encoded_read_endio()
Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
|
7.8 |
High |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: ref-verify: fix use-after-free after invalid ref action At btrfs_ref_tree_mod() after we successfully inserted the new ref entry (local variable 'ref') into the respective block entry's rbtree (local variable 'be'), if we find an unexpected action of BTRFS_DROP_DELAYED_REF, we error out and free the ref entry without removing it from the block entry's rbtree. Then in the error path of btrfs_ref_tree_mod() we call btrfs_free_ref_cache(), which iterates over all block entries and then calls free_block_entry() for each one, and there we will trigger a use-after-free when we are called against the block entry to which we added the freed ref entry to its rbtree, since the rbtree still points to the block entry, as we didn't remove it from the rbtree before freeing it in the error path at btrfs_ref_tree_mod(). Fix this by removing the new ref entry from the rbtree before freeing it. Syzbot report this with the following stack traces: BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4314 btrfs_insert_empty_item fs/btrfs/ctree.h:669 [inline] btrfs_insert_orphan_item+0x1f1/0x320 fs/btrfs/orphan.c:23 btrfs_orphan_add+0x6d/0x1a0 fs/btrfs/inode.c:3482 btrfs_unlink+0x267/0x350 fs/btrfs/inode.c:4293 vfs_unlink+0x365/0x650 fs/namei.c:4469 do_unlinkat+0x4ae/0x830 fs/namei.c:4533 __do_sys_unlinkat fs/namei.c:4576 [inline] __se_sys_unlinkat fs/namei.c:4569 [inline] __x64_sys_unlinkat+0xcc/0xf0 fs/namei.c:4569 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f BTRFS error (device loop0 state EA): Ref action 1, root 5, ref_root 5, parent 0, owner 260, offset 0, num_refs 1 __btrfs_mod_ref+0x76b/0xac0 fs/btrfs/extent-tree.c:2521 update_ref_for_cow+0x96a/0x11f0 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline] __btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137 __btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171 btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313 prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586 relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538 BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_i ---truncated--- | 7.8 |
High |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: fix error path on configuration of power domains
There is a chance to meet runtime issues during configuration of CAMSS
power domains, because on the error path dev_pm_domain_detach() is
unexpectedly called with NULL or error pointer.
One of the simplest ways to reproduce the problem is to probe CAMSS
driver before registration of CAMSS power domains, for instance if
a platform CAMCC driver is simply not built.
Warning backtrace example:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a2
|
5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: amphion: Set video drvdata before register video device The video drvdata should be set before the video device is registered, otherwise video_drvdata() may return NULL in the open() file ops, and led to oops. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Set video drvdata before register video device The video drvdata should be set before the video device is registered, otherwise video_drvdata() may return NULL in the open() file ops, and led to oops. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix null-ptr-deref during unload module The workqueue should be destroyed in mtk_jpeg_core.c since commit 09aea13ecf6f ("media: mtk-jpeg: refactor some variables"), otherwise the below calltrace can be easily triggered. [ 677.862514] Unable to handle kernel paging request at virtual address dfff800000000023 [ 677.863633] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] ... [ 677.879654] CPU: 6 PID: 1071 Comm: modprobe Tainted: G O 6.8.12-mtk+gfa1a78e5d24b+ #17 ... [ 677.882838] pc : destroy_workqueue+0x3c/0x770 [ 677.883413] lr : mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.884314] sp : ffff80008ad974f0 [ 677.884744] x29: ffff80008ad974f0 x28: ffff0000d7115580 x27: ffff0000dd691070 [ 677.885669] x26: ffff0000dd691408 x25: ffff8000844af3e0 x24: ffff80008ad97690 [ 677.886592] x23: ffff0000e051d400 x22: ffff0000dd691010 x21: dfff800000000000 [ 677.887515] x20: 0000000000000000 x19: 0000000000000000 x18: ffff800085397ac0 [ 677.888438] x17: 0000000000000000 x16: ffff8000801b87c8 x15: 1ffff000115b2e10 [ 677.889361] x14: 00000000f1f1f1f1 x13: 0000000000000000 x12: ffff7000115b2e4d [ 677.890285] x11: 1ffff000115b2e4c x10: ffff7000115b2e4c x9 : ffff80000aa43e90 [ 677.891208] x8 : 00008fffeea4d1b4 x7 : ffff80008ad97267 x6 : 0000000000000001 [ 677.892131] x5 : ffff80008ad97260 x4 : ffff7000115b2e4d x3 : 0000000000000000 [ 677.893054] x2 : 0000000000000023 x1 : dfff800000000000 x0 : 0000000000000118 [ 677.893977] Call trace: [ 677.894297] destroy_workqueue+0x3c/0x770 [ 677.894826] mtk_jpegdec_destroy_workqueue+0x70/0x88 [mtk_jpeg_dec_hw] [ 677.895677] devm_action_release+0x50/0x90 [ 677.896211] release_nodes+0xe8/0x170 [ 677.896688] devres_release_all+0xf8/0x178 [ 677.897219] device_unbind_cleanup+0x24/0x170 [ 677.897785] device_release_driver_internal+0x35c/0x480 [ 677.898461] device_release_driver+0x20/0x38 ... [ 677.912665] ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Ensure power suppliers be suspended before detach them The power suppliers are always requested to suspend asynchronously, dev_pm_domain_detach() requires the caller to ensure proper synchronization of this function with power management callbacks. otherwise the detach may led to kernel panic, like below: [ 1457.107934] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040 [ 1457.116777] Mem abort info: [ 1457.119589] ESR = 0x0000000096000004 [ 1457.123358] EC = 0x25: DABT (current EL), IL = 32 bits [ 1457.128692] SET = 0, FnV = 0 [ 1457.131764] EA = 0, S1PTW = 0 [ 1457.134920] FSC = 0x04: level 0 translation fault [ 1457.139812] Data abort info: [ 1457.142707] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1457.148196] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1457.153256] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1457.158563] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001138b6000 [ 1457.165000] [0000000000000040] pgd=0000000000000000, p4d=0000000000000000 [ 1457.171792] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 1457.178045] Modules linked in: v4l2_jpeg wave6_vpu_ctrl(-) [last unloaded: mxc_jpeg_encdec] [ 1457.186383] CPU: 0 PID: 51938 Comm: kworker/0:3 Not tainted 6.6.36-gd23d64eea511 #66 [ 1457.194112] Hardware name: NXP i.MX95 19X19 board (DT) [ 1457.199236] Workqueue: pm pm_runtime_work [ 1457.203247] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1457.210188] pc : genpd_runtime_suspend+0x20/0x290 [ 1457.214886] lr : __rpm_callback+0x48/0x1d8 [ 1457.218968] sp : ffff80008250bc50 [ 1457.222270] x29: ffff80008250bc50 x28: 0000000000000000 x27: 0000000000000000 [ 1457.229394] x26: 0000000000000000 x25: 0000000000000008 x24: 00000000000f4240 [ 1457.236518] x23: 0000000000000000 x22: ffff00008590f0e4 x21: 0000000000000008 [ 1457.243642] x20: ffff80008099c434 x19: ffff00008590f000 x18: ffffffffffffffff [ 1457.250766] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 63343a6d726f6674 [ 1457.257890] x14: 0000000000000004 x13: 00000000000003a4 x12: 0000000000000002 [ 1457.265014] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff80008250bbb0 [ 1457.272138] x8 : ffff000092937200 x7 : ffff0003fdf6af80 x6 : 0000000000000000 [ 1457.279262] x5 : 00000000410fd050 x4 : 0000000000200000 x3 : 0000000000000000 [ 1457.286386] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008590f000 [ 1457.293510] Call trace: [ 1457.295946] genpd_runtime_suspend+0x20/0x290 [ 1457.300296] __rpm_callback+0x48/0x1d8 [ 1457.304038] rpm_callback+0x6c/0x78 [ 1457.307515] rpm_suspend+0x10c/0x570 [ 1457.311077] pm_runtime_work+0xc4/0xc8 [ 1457.314813] process_one_work+0x138/0x248 [ 1457.318816] worker_thread+0x320/0x438 [ 1457.322552] kthread+0x110/0x114 [ 1457.325767] ret_from_fork+0x10/0x20 | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
media: ts2020: fix null-ptr-deref in ts2020_probe()
KASAN reported a null-ptr-deref issue when executing the following
command:
# echo ts2020 0x20 > /sys/bus/i2c/devices/i2c-0/new_device
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 53 UID: 0 PID: 970 Comm: systemd-udevd Not tainted 6.12.0-rc2+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
RIP: 0010:ts2020_probe+0xad/0xe10 [ts2020]
RSP: 0018:ffffc9000abbf598 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffffc0714809
RDX: 0000000000000002 RSI: ffff88811550be00 RDI: 0000000000000010
RBP: ffff888109868800 R08: 0000000000000001 R09: fffff52001577eb6
R10: 0000000000000000 R11: ffffc9000abbff50 R12: ffffffffc0714790
R13: 1ffff92001577eb8 R14: ffffffffc07190d0 R15: 0000000000000001
FS: 00007f95f13b98c0(0000) GS:ffff888149280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555d2634b000 CR3: 0000000152236000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: platform: allegro-dvt: Fix possible memory leak in allocate_buffers_internal() The buffer in the loop should be released under the exception path, otherwise there may be a memory leak here. To mitigate this, free the buffer when allegro_alloc_buffer fails. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix regression with module command in stack_trace_filter When executing the following command: # echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter The current mod command causes a null pointer dereference. While commit 0f17976568b3f ("ftrace: Fix regression with module command in stack_trace_filter") has addressed part of the issue, it left a corner case unhandled, which still results in a kernel crash. | 5.5 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Defer probe of clients after smmu device bound Null pointer dereference occurs due to a race between smmu driver probe and client driver probe, when of_dma_configure() for client is called after the iommu_device_register() for smmu driver probe has executed but before the driver_bound() for smmu driver has been called. Following is how the race occurs: T1:Smmu device probe T2: Client device probe really_probe() arm_smmu_device_probe() iommu_device_register() really_probe() platform_dma_configure() of_dma_configure() of_dma_configure_id() of_iommu_configure() iommu_probe_device() iommu_init_device() arm_smmu_probe_device() arm_smmu_get_by_fwnode() driver_find_device_by_fwnode() driver_find_device() next_device() klist_next() /* null ptr assigned to smmu */ /* null ptr dereference while smmu->streamid_mask */ driver_bound() klist_add_tail() When this null smmu pointer is dereferenced later in arm_smmu_probe_device, the device crashes. Fix this by deferring the probe of the client device until the smmu device has bound to the arm smmu driver. [will: Add comment] | 4.7 |
Medium |
|
14h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ad7780: fix division by zero in ad7780_write_raw() In the ad7780_write_raw() , val2 can be zero, which might lead to a division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw() is based on iio_info's write_raw. While val is explicitly declared that can be zero (in read mode), val2 is not specified to be non-zero. | 5.5 |
Medium |
|
14h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix usage slab after free
[ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147
[ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1
[ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000016] Call Trace:
[ +0.000008] |
7.8 |
High |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix NULL pointer dereference in object->file At present, the object->file has the NULL pointer dereference problem in ondemand-mode. The root cause is that the allocated fd and object->file lifetime are inconsistent, and the user-space invocation to anon_fd uses object->file. Following is the process that triggers the issue: [write fd] [umount] cachefiles_ondemand_fd_write_iter fscache_cookie_state_machine cachefiles_withdraw_cookie if (!file) return -ENOBUFS cachefiles_clean_up_object cachefiles_unmark_inode_in_use fput(object->file) object->file = NULL // file NULL pointer dereference! __cachefiles_write(..., file, ...) Fix this issue by add an additional reference count to the object->file before write/llseek, and decrement after it finished. | 5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
udmabuf: change folios array from kmalloc to kvmalloc
When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine,
page_alloc only support 4MB.
If above this, trigger this warn and return NULL.
udmabuf can change size limit, if change it to 3072(3GB), and then alloc
3GB udmabuf, will fail create.
[ 4080.876581] ------------[ cut here ]------------
[ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350
[ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350
[ 4080.879470] Call Trace:
[ 4080.879473] |
5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup()
During ath12k module removal, in ath12k_core_deinit(),
ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees
the ah->hw as well as all the ar's in it. After this
ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup()
tries to access one of the freed ar's from pending skb.
This is because during mac destroy, driver failed to flush few
data packets, which were accessed later in ath12k_dp_cc_cleanup()
and freed, but using ar from the packet led to this use-after-free.
BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k]
Write of size 4 at addr ffff888150bd3514 by task modprobe/8926
CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted
6.11.0-rc2-wt-ath+ #1746
Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS
HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
Call Trace:
|
7.8 |
High |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Prevent recovery invocation during probe and resume Refactor IPC send and receive functions to allow correct handling of operations that should not trigger a recovery process. Expose ivpu_send_receive_internal(), which is now utilized by the D0i3 entry, DCT initialization, and HWS initialization functions. These functions have been modified to return error codes gracefully, rather than initiating recovery. The updated functions are invoked within ivpu_probe() and ivpu_resume(), ensuring that any errors encountered during these stages result in a proper teardown or shutdown sequence. The previous approach of triggering recovery within these functions could lead to a race condition, potentially causing undefined behavior and kernel crashes due to null pointer dereferences. | 4.7 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_kms: Unplug DRM device before removal Prevent userspace accesses to the DRM device from causing use-after-frees by unplugging the device before we remove it. This causes any further userspace accesses to result in an error without further calls into this driver's internals. | 7.8 |
High |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm: xlnx: zynqmp_disp: layer may be null while releasing layer->info can be null if we have an error on the first layer in zynqmp_disp_create_layers | 5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: Fix potential NULL dereference A recent refactoring was identified by static analysis to cause a potential NULL dereference, fix this! | 5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: coex: check NULL return of kmalloc in btc_fw_set_monreg() kmalloc may fail, return value might be NULL and will cause NULL pointer dereference. Add check NULL return of kmalloc in btc_fw_set_monreg(). | 5.5 |
Medium |
|
14h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
isofs: avoid memory leak in iocharset
A memleak was found as below:
unreferenced object 0xffff0000d10164d8 (size 8):
comm "pool-udisksd", pid 108217, jiffies 4295408555
hex dump (first 8 bytes):
75 74 66 38 00 cc cc cc utf8....
backtrace (crc de430d31):
[ |
5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Release resources at card release The current 6fire code tries to release the resources right after the call of usb6fire_chip_abort(). But at this moment, the card object might be still in use (as we're calling snd_card_free_when_closed()). For avoid potential UAFs, move the release of resources to the card's private_free instead of the manual call of usb6fire_chip_destroy() at the USB disconnect callback. | 7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: adjust the position to init iso data anchor MediaTek iso data anchor init should be moved to where MediaTek claims iso data interface. If there is an unexpected BT usb disconnect during setup flow, it will cause a NULL pointer crash issue when releasing iso anchor since the anchor wasn't been init yet. Adjust the position to do iso data anchor init. [ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168 [ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168 [ 17.137999] sp : ffffffc0890cb5f0 [ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80 [ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines [ 17.148421] x27: 0000000000000000 [ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0 [ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001 [ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000 [ 17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000 [ 17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001 [ 17.239912] x11: 0000000080150011 x10: 0000000000000002 x9 : 0000000000000001 [ 17.247035] x8 : 0000000000000000 x7 : 0000000000008080 x6 : 8080000000000000 [ 17.254158] x5 : ffffffd33808ebc0 x4 : fffffffe033dcf20 x3 : 0000000080150011 [ 17.261281] x2 : ffffff8087a91400 x1 : 0000000000000000 x0 : ffffff80c0f25588 [ 17.268404] Call trace: [ 17.270841] usb_kill_anchored_urbs+0x60/0x168 [ 17.275274] btusb_mtk_release_iso_intf+0x2c/0xd8 [btusb (HASH:5afe 6)] [ 17.284226] btusb_mtk_disconnect+0x14/0x28 [btusb (HASH:5afe 6)] [ 17.292652] btusb_disconnect+0x70/0x140 [btusb (HASH:5afe 6)] [ 17.300818] usb_unbind_interface+0xc4/0x240 [ 17.305079] device_release_driver_internal+0x18c/0x258 [ 17.310296] device_release_driver+0x1c/0x30 [ 17.314557] bus_remove_device+0x140/0x160 [ 17.318643] device_del+0x1c0/0x330 [ 17.322121] usb_disable_device+0x80/0x180 [ 17.326207] usb_disconnect+0xec/0x300 [ 17.329948] hub_quiesce+0x80/0xd0 [ 17.333339] hub_disconnect+0x44/0x190 [ 17.337078] usb_unbind_interface+0xc4/0x240 [ 17.341337] device_release_driver_internal+0x18c/0x258 [ 17.346551] device_release_driver+0x1c/0x30 [ 17.350810] usb_driver_release_interface+0x70/0x88 [ 17.355677] proc_ioctl+0x13c/0x228 [ 17.359157] proc_ioctl_default+0x50/0x80 [ 17.363155] usbdev_ioctl+0x830/0xd08 [ 17.366808] __arm64_sys_ioctl+0x94/0xd0 [ 17.370723] invoke_syscall+0x6c/0xf8 [ 17.374377] el0_svc_common+0x84/0xe0 [ 17.378030] do_el0_svc+0x20/0x30 [ 17.381334] el0_svc+0x34/0x60 [ 17.384382] el0t_64_sync_handler+0x88/0xf0 [ 17.388554] el0t_64_sync+0x180/0x188 [ 17.392208] Code: f9400677 f100a2f4 54fffea0 d503201f (b8350288) [ 17.398289] ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix use-after-free in device_for_each_child()
Syzbot has reported the following KASAN splat:
BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0
Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980
CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
|
7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device. | 7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() cpufreq_cpu_get_raw() may return NULL if the cpu is not in policy->cpus cpu mask and it will cause null pointer dereference. | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() cpufreq_cpu_get_raw() may return NULL if the cpu is not in policy->cpus cpu mask and it will cause null pointer dereference, so check NULL for cppc_get_cpu_cost(). | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: riscv: kvm: Fix out-of-bounds array access In kvm_riscv_vcpu_sbi_init() the entry->ext_idx can contain an out-of-bound index. This is used as a special marker for the base extensions, that cannot be disabled. However, when traversing the extensions, that special marker is not checked prior indexing the array. Add an out-of-bounds check to the function. | 7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
BUG: KASAN: slab-use-after-free in __lock_acquire+0x2aca/0x3a20
Read of size 8 at addr ffff8881082d80c8 by task modprobe/25303
Call Trace:
|
7.8 |
High |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg() ib_map_mr_sg() allows ULPs to specify NULL as the sg_offset argument. The driver needs to check whether it is a NULL pointer before dereferencing it. | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Move events notifier registration to be after device registration Move pkey change work initialization and cleanup from device resources stage to notifier stage, since this is the stage which handles this work events. Fix a race between the device deregistration and pkey change work by moving MLX5_IB_STAGE_DEVICE_NOTIFIER to be after MLX5_IB_STAGE_IB_REG in order to ensure that the notifier is deregistered before the device during cleanup. Which ensures there are no works that are being executed after the device has already unregistered which can cause the panic below. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 630071 Comm: kworker/1:2 Kdump: loaded Tainted: G W OE --------- --- 5.14.0-162.6.1.el9_1.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 02/27/2023 Workqueue: events pkey_change_handler [mlx5_ib] RIP: 0010:setup_qp+0x38/0x1f0 [mlx5_ib] Code: ee 41 54 45 31 e4 55 89 f5 53 48 89 fb 48 83 ec 20 8b 77 08 65 48 8b 04 25 28 00 00 00 48 89 44 24 18 48 8b 07 48 8d 4c 24 16 <4c> 8b 38 49 8b 87 80 0b 00 00 4c 89 ff 48 8b 80 08 05 00 00 8b 40 RSP: 0018:ffffbcc54068be20 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff954054494128 RCX: ffffbcc54068be36 RDX: ffff954004934000 RSI: 0000000000000001 RDI: ffff954054494128 RBP: 0000000000000023 R08: ffff954001be2c20 R09: 0000000000000001 R10: ffff954001be2c20 R11: ffff9540260133c0 R12: 0000000000000000 R13: 0000000000000023 R14: 0000000000000000 R15: ffff9540ffcb0905 FS: 0000000000000000(0000) GS:ffff9540ffc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010625c001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_gsi_pkey_change+0x20/0x40 [mlx5_ib] process_one_work+0x1e8/0x3c0 worker_thread+0x50/0x3b0 ? rescuer_thread+0x380/0x380 kthread+0x149/0x170 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) mlx5_fwctl(OE) fwctl(OE) ib_uverbs(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlx_compat(OE) psample mlxfw(OE) tls knem(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache netfs qrtr rfkill sunrpc intel_rapl_msr intel_rapl_common rapl hv_balloon hv_utils i2c_piix4 pcspkr joydev fuse ext4 mbcache jbd2 sr_mod sd_mod cdrom t10_pi sg ata_generic pci_hyperv pci_hyperv_intf hyperv_drm drm_shmem_helper drm_kms_helper hv_storvsc syscopyarea hv_netvsc sysfillrect sysimgblt hid_hyperv fb_sys_fops scsi_transport_fc hyperv_keyboard drm ata_piix crct10dif_pclmul crc32_pclmul crc32c_intel libata ghash_clmulni_intel hv_vmbus serio_raw [last unloaded: ib_core] CR2: 0000000000000000 ---[ end trace f6f8be4eae12f7bc ]--- | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: zram: fix NULL pointer in comp_algorithm_show() LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix null-ptr-deref in f2fs_submit_page_bio()
There's issue as follows when concurrently installing the f2fs.ko
module and mounting the f2fs file system:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
RIP: 0010:__bio_alloc+0x2fb/0x6c0 [f2fs]
Call Trace:
|
5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent NULL dereference in nfsd4_process_cb_update() @ses is initialized to NULL. If __nfsd4_find_backchannel() finds no available backchannel session, setup_callback_client() will try to dereference @ses and segfault. | 5.5 |
Medium |
|
13h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init()
There's issue as follows:
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
RPC: Unregistered rdma transport module.
RPC: Unregistered rdma backchannel transport module.
BUG: unable to handle page fault for address: fffffbfff80c609a
PGD 123fee067 P4D 123fee067 PUD 123fea067 PMD 10c624067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
RIP: 0010:percpu_counter_destroy_many+0xf7/0x2a0
Call Trace:
|
5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Fix double free issue with interrupt buffer allocation In lan78xx_probe(), the buffer `buf` was being freed twice: once implicitly through `usb_free_urb(dev->urb_intr)` with the `URB_FREE_BUFFER` flag and again explicitly by `kfree(buf)`. This caused a double free issue. To resolve this, reordered `kmalloc()` and `usb_alloc_urb()` calls to simplify the initialization sequence and removed the redundant `kfree(buf)`. Now, `buf` is allocated after `usb_alloc_urb()`, ensuring it is correctly managed by `usb_fill_int_urb()` and freed by `usb_free_urb()` as intended. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount (skb->users) and iucv_sock_recvmsg() does not decrement skb refcount at exit. This results in skb memory leak in skb_queue_purge() and WARN_ON in iucv_sock_destruct() during socket close. To fix this decrease skb refcount by one if MSG_PEEK is set in order to prevent memory leak and WARN_ON. WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv] CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv] [<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv] [<001587c704117a32>] __sk_destruct+0x52/0x550 [<001587c704104a54>] __sock_release+0xa4/0x230 [<001587c704104c0c>] sock_close+0x2c/0x40 [<001587c702c5f5a8>] __fput+0x2e8/0x970 [<001587c7024148c4>] task_work_run+0x1c4/0x2c0 [<001587c7023b0716>] do_exit+0x996/0x1050 [<001587c7023b13aa>] do_group_exit+0x13a/0x360 [<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60 [<001587c7022bccca>] do_syscall+0x27a/0x380 [<001587c7049a6a0c>] __do_syscall+0x9c/0x160 [<001587c7049ce8a8>] system_call+0x70/0x98 Last Breaking-Event-Address: [<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv] | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
This fixes the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353
Read of size 8 at addr ffff888029b4dd18 by task kworker/u9:0/54
CPU: 1 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-01155-gf723224742fc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
|
7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: realtek: usb: fix NULL deref in rtk_usb2phy_probe In rtk_usb2phy_probe() devm_kzalloc() may return NULL but this returned value is not checked. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: realtek: usb: fix NULL deref in rtk_usb3phy_probe In rtk_usb3phy_probe() devm_kzalloc() may return NULL but this returned value is not checked. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential array underflow in ucsi_ccg_sync_control() The "command" variable can be controlled by the user via debugfs. The worry is that if con_index is zero then "&uc->ucsi->connector[con_index - 1]" would be an array underflow. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix possible resource leak in fw_log_firmware_info() The alg instance should be released under the exception path, otherwise there may be resource leak here. To mitigate this, free the alg instance with crypto_free_shash when kmalloc fails. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dpp This commit addresses a null pointer dereference issue in hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-audmix: Add NULL check in imx_audmix_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in imx_audmix_probe() is not checked. Add NULL check in imx_audmix_probe(), to handle kernel NULL pointer dereference error. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 Call Trace: free_large_kmalloc ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix crash when unbinding If there is an error during some initialization related to firmware, the function ath12k_dp_cc_cleanup is called to release resources. However this is released again when the device is unbinded (ath12k_pci), and we get: BUG: kernel NULL pointer dereference, address: 0000000000000020 at RIP: 0010:ath12k_dp_cc_cleanup.part.0+0xb6/0x500 [ath12k] Call Trace: ath12k_dp_cc_cleanup ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set to NULL the released structure in ath12k_dp_cc_cleanup at the end. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
io_uring: check for overflows in io_pin_pages
WARNING: CPU: 0 PID: 5834 at io_uring/memmap.c:144 io_pin_pages+0x149/0x180 io_uring/memmap.c:144
CPU: 0 UID: 0 PID: 5834 Comm: syz-executor825 Not tainted 6.12.0-next-20241118-syzkaller #0
Call Trace:
|
5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Add sanity NULL check for the default mmap fault handler A driver might allow the mmap access before initializing its runtime->dma_area properly. Add a proper NULL check before passing to virt_to_page() for avoiding a panic. | 5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of signing key Customers have reported use-after-free in @ses->auth_key.response with SMB2.1 + sign mounts which occurs due to following race: task A task B cifs_mount() dfs_mount_share() get_session() cifs_mount_get_session() cifs_send_recv() cifs_get_smb_ses() compound_send_recv() cifs_setup_session() smb2_setup_request() kfree_sensitive() smb2_calc_signature() crypto_shash_setkey() *UAF* Fix this by ensuring that we have a valid @ses->auth_key.response by checking whether @ses->ses_status is SES_GOOD or SES_EXITING with @ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()"), we made sure to call ->logoff() only when @ses was known to be good (e.g. valid ->auth_key.response), so it's safe to access signing key when @ses->ses_status == SES_EXITING. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipc: fix memleak if msg_init_ns failed in create_ipc_ns
Percpu memory allocation may failed during create_ipc_ns however this
fail is not handled properly since ipc sysctls and mq sysctls is not
released properly. Fix this by release these two resource when failure.
Here is the kmemleak stack when percpu failed:
unreferenced object 0xffff88819de2a600 (size 512):
comm "shmem_2nstest", pid 120711, jiffies 4300542254
hex dump (first 32 bytes):
60 aa 9d 84 ff ff ff ff fc 18 48 b2 84 88 ff ff `.........H.....
04 00 00 00 a4 01 00 00 20 e4 56 81 ff ff ff ff ........ .V.....
backtrace (crc be7cba35):
[ |
5.5 |
Medium |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSv4.0: Fix a use-after-free problem in the asynchronous open() Yang Erkun reports that when two threads are opening files at the same time, and are forced to abort before a reply is seen, then the call to nfs_release_seqid() in nfs4_opendata_free() can result in a use-after-free of the pointer to the defunct rpc task of the other thread. The fix is to ensure that if the RPC call is aborted before the call to nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid() in nfs4_open_release() before the rpc_task is freed. | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit After an insertion in TNC, the tree might split and cause a node to change its `znode->parent`. A further deletion of other nodes in the tree (which also could free the nodes), the aforementioned node's `znode->cparent` could still point to a freed node. This `znode->cparent` may not be updated when getting nodes to commit in `ubifs_tnc_start_commit()`. This could then trigger a use-after-free when accessing the `znode->cparent` in `write_index()` in `ubifs_tnc_end_commit()`. This can be triggered by running rm -f /etc/test-file.bin dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then reports: BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950 Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153 Call trace: dump_backtrace+0x0/0x340 show_stack+0x18/0x24 dump_stack_lvl+0x9c/0xbc print_address_description.constprop.0+0x74/0x2b0 kasan_report+0x1d8/0x1f0 kasan_check_range+0xf8/0x1a0 memcpy+0x84/0xf4 ubifs_tnc_end_commit+0xa5c/0x1950 do_commit+0x4e0/0x1340 ubifs_bg_thread+0x234/0x2e0 kthread+0x36c/0x410 ret_from_fork+0x10/0x20 Allocated by task 401: kasan_save_stack+0x38/0x70 __kasan_kmalloc+0x8c/0xd0 __kmalloc+0x34c/0x5bc tnc_insert+0x140/0x16a4 ubifs_tnc_add+0x370/0x52c ubifs_jnl_write_data+0x5d8/0x870 do_writepage+0x36c/0x510 ubifs_writepage+0x190/0x4dc __writepage+0x58/0x154 write_cache_pages+0x394/0x830 do_writepages+0x1f0/0x5b0 filemap_fdatawrite_wbc+0x170/0x25c file_write_and_wait_range+0x140/0x190 ubifs_fsync+0xe8/0x290 vfs_fsync_range+0xc0/0x1e4 do_fsync+0x40/0x90 __arm64_sys_fsync+0x34/0x50 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 Freed by task 403: kasan_save_stack+0x38/0x70 kasan_set_track+0x28/0x40 kasan_set_free_info+0x28/0x4c __kasan_slab_free+0xd4/0x13c kfree+0xc4/0x3a0 tnc_delete+0x3f4/0xe40 ubifs_tnc_remove_range+0x368/0x73c ubifs_tnc_remove_ino+0x29c/0x2e0 ubifs_jnl_delete_inode+0x150/0x260 ubifs_evict_inode+0x1d4/0x2e4 evict+0x1c8/0x450 iput+0x2a0/0x3c4 do_unlinkat+0x2cc/0x490 __arm64_sys_unlinkat+0x90/0x100 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free when a node becomes root in TNC but still has a `cparent` to an already freed node. More specifically, consider the following TNC: zroot / / zp1 / / zn Inserting a new node `zn_new` with a key smaller then `zn` will trigger a split in `tnc_insert()` if `zp1` is full: zroot / \ / \ zp1 zp2 / \ / \ zn_new zn `zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still points to `zp1`. Now, consider a removal of all the nodes _except_ `zn`. Just when `tnc_delete()` is about to delete `zroot` and `zp2`: zroot \ \ zp2 \ \ zn `zroot` and `zp2` get freed and the tree collapses: zn `zn` now becomes the new `zroot`. `get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and `write_index()` will check its `znode->cparent` that wrongly points to the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called with `znode->cparent->zbranch[znode->iip].hash` that triggers the use-after-free! Fix this by explicitly setting `znode->cparent` to `NULL` in `get_znodes_to_commit()` for the root node. The search for the dirty nodes ---truncated--- | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: block: fix uaf for flush rq while iterating tags blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [in ---truncated--- | 7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0
Read of size 1 at addr ffff888111f322cd by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
Call Trace:
|
7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix bfqq uaf in bfq_limit_depth()
Set new allocated bfqq to bic or remove freed bfqq from bic are both
protected by bfqd->lock, however bfq_limit_depth() is deferencing bfqq
from bic without the lock, this can lead to UAF if the io_context is
shared by multiple tasks.
For example, test bfq with io_uring can trigger following UAF in v6.6:
==================================================================
BUG: KASAN: slab-use-after-free in bfqq_group+0x15/0x50
Call Trace:
|
7.8 |
High |
|
13h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sh: intc: Fix use-after-free bug in register_intc_controller() In the error handling for this function, d is freed without ever removing it from intc_list which would lead to a use after free. To fix this, let's only add it to the list after everything has succeeded. | 7.8 |
High |
|
11h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: EDAC/bluefield: Fix potential integer overflow The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as 32-bits wide the left-shift operation truncates the upper 16 bits of information during the calculation of the SMC argument. The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any potential integer overflow, i.e. loss of data from upper 16 bits. | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Check the DVFS OPP count returned by the firmware Fix a kernel crash with the below call trace when the SCPI firmware returns OPP count of zero. dvfs_info.opp_count may be zero on some platforms during the reboot test, and the kernel will crash after dereferencing the pointer to kcalloc(info->count, sizeof(*opp), GFP_KERNEL). | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 | Mem abort info: | ESR = 0x96000004 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c | [0000000000000028] pgd=0000000000000000 | Internal error: Oops: 96000004 [#1] SMP | scpi-hwmon: probe of PHYT000D:00 failed with error -110 | Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c) | CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1 | Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | lr : clk_register+0x438/0x720 | Call trace: | scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | devm_clk_hw_register+0x50/0xa0 | scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi] | scpi_clocks_probe+0x528/0x70c [clk_scpi] | platform_drv_probe+0x58/0xa8 | really_probe+0x260/0x3d0 | driver_probe_device+0x12c/0x148 | device_driver_attach+0x74/0x98 | __driver_attach+0xb4/0xe8 | bus_for_each_dev+0x88/0xe0 | driver_attach+0x30/0x40 | bus_add_driver+0x178/0x2b0 | driver_register+0x64/0x118 | __platform_driver_register+0x54/0x60 | scpi_clocks_driver_init+0x24/0x1000 [clk_scpi] | do_one_initcall+0x54/0x220 | do_init_module+0x54/0x1c8 | load_module+0x14a4/0x1668 | __se_sys_finit_module+0xf8/0x110 | __arm64_sys_finit_module+0x24/0x30 | el0_svc_common+0x78/0x170 | el0_svc_handler+0x38/0x78 | el0_svc+0x8/0x340 | Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820) | ---[ end trace 06feb22469d89fa8 ]--- | Kernel panic - not syncing: Fatal exception | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x10,a0002008 | Memory Limit: none | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
|
7.8 |
High |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix uninitialized value in ocfs2_file_read_iter() Syzbot has reported the following KMSAN splat: BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80 ocfs2_file_read_iter+0x9a4/0xf80 __io_read+0x8d4/0x20f0 io_read+0x3e/0xf0 io_issue_sqe+0x42b/0x22c0 io_wq_submit_work+0xaf9/0xdc0 io_worker_handle_work+0xd13/0x2110 io_wq_worker+0x447/0x1410 ret_from_fork+0x6f/0x90 ret_from_fork_asm+0x1a/0x30 Uninit was created at: __alloc_pages_noprof+0x9a7/0xe00 alloc_pages_mpol_noprof+0x299/0x990 alloc_pages_noprof+0x1bf/0x1e0 allocate_slab+0x33a/0x1250 ___slab_alloc+0x12ef/0x35e0 kmem_cache_alloc_bulk_noprof+0x486/0x1330 __io_alloc_req_refill+0x84/0x560 io_submit_sqes+0x172f/0x2f30 __se_sys_io_uring_enter+0x406/0x41c0 __x64_sys_io_uring_enter+0x11f/0x1a0 x64_sys_call+0x2b54/0x3ba0 do_syscall_64+0xcd/0x1e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Since an instance of 'struct kiocb' may be passed from the block layer with 'private' field uninitialized, introduce 'ocfs2_iocb_init_rw_locked()' and use it from where 'ocfs2_dio_end_io()' might take care, i.e. in 'ocfs2_file_read_iter()' and 'ocfs2_file_write_iter()'. | 7.1 |
High |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: clk: clk-apple-nco: Add NULL check in applnco_probe Add NULL check in applnco_probe, to handle kernel NULL pointer dereference error. | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: svcrdma: Address an integer overflow Dan Carpenter reports: > Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data > structure") from Jun 22, 2020 (linux-next), leads to the following > Smatch static checker warning: > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk() > warn: potential user controlled sizeof overflow 'segcount * 4 * 4' > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c > 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt) > 489 { > 490 u32 segcount; > 491 __be32 *p; > 492 > 493 if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount)) > ^^^^^^^^ > > 494 return false; > 495 > 496 /* A bogus segcount causes this buffer overflow check to fail. */ > 497 p = xdr_inline_decode(&rctxt->rc_stream, > --> 498 segcount * rpcrdma_segment_maxsz * sizeof(*p)); > > > segcount is an untrusted u32. On 32bit systems anything >= SIZE_MAX / 16 will > have an integer overflow and some those values will be accepted by > xdr_inline_decode(). | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out of bounds reads when finding clock sources The current USB-audio driver code doesn't check bLength of each descriptor at traversing for clock descriptors. That is, when a device provides a bogus descriptor with a shorter bLength, the driver might hit out-of-bounds reads. For addressing it, this patch adds sanity checks to the validator functions for the clock descriptor traversal. When the descriptor length is shorter than expected, it's skipped in the loop. For the clock source and clock multiplier descriptors, we can just check bLength against the sizeof() of each descriptor type. OTOH, the clock selector descriptor of UAC2 and UAC3 has an array of bNrInPins elements and two more fields at its tail, hence those have to be checked in addition to the sizeof() check. | 7.1 |
High |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: glink: fix off-by-one in connector_status UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS. Correct the condition in the pmic_glink_ucsi_connector_status() callback, fixing Type-C orientation reporting for the third USB-C connector. | 4.6 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent a potential integer overflow If the tag length is >= U32_MAX - 3 then the "length + 4" addition can result in an integer overflow. Address this by splitting the decoding into several steps so that decode_cb_compound4res() does not have to perform arithmetic on the unsafe length value. | 5.5 |
Medium |
|
11h28 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: um: Fix potential integer overflow during physmem setup This issue happens when the real map size is greater than LONG_MAX, which can be easily triggered on UML/i386. | 5.5 |
Medium |
|
09h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: initramfs: avoid filename buffer overrun The initramfs filename field is defined in Documentation/driver-api/early-userspace/buffer-format.rst as: 37 cpio_file := ALGN(4) + cpio_header + filename + "\0" + ALGN(4) + data ... 55 ============= ================== ========================= 56 Field name Field size Meaning 57 ============= ================== ========================= ... 70 c_namesize 8 bytes Length of filename, including final \0 When extracting an initramfs cpio archive, the kernel's do_name() path handler assumes a zero-terminated path at @collected, passing it directly to filp_open() / init_mkdir() / init_mknod(). If a specially crafted cpio entry carries a non-zero-terminated filename and is followed by uninitialized memory, then a file may be created with trailing characters that represent the uninitialized memory. The ability to create an initramfs entry would imply already having full control of the system, so the buffer overrun shouldn't be considered a security vulnerability. Append the output of the following bash script to an existing initramfs and observe any created /initramfs_test_fname_overrunAA* path. E.g. ./reproducer.sh | gzip >> /myinitramfs It's easiest to observe non-zero uninitialized memory when the output is gzipped, as it'll overflow the heap allocated @out_buf in __gunzip(), rather than the initrd_start+initrd_size block. ---- reproducer.sh ---- nilchar="A" # change to "\0" to properly zero terminate / pad magic="070701" ino=1 mode=$(( 0100777 )) uid=0 gid=0 nlink=1 mtime=1 filesize=0 devmajor=0 devminor=1 rdevmajor=0 rdevminor=0 csum=0 fname="initramfs_test_fname_overrun" namelen=$(( ${#fname} + 1 )) # plus one to account for terminator printf "%s%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%s" \ $magic $ino $mode $uid $gid $nlink $mtime $filesize \ $devmajor $devminor $rdevmajor $rdevminor $namelen $csum $fname termpadlen=$(( 1 + ((4 - ((110 + $namelen) & 3)) % 4) )) printf "%.s${nilchar}" $(seq 1 $termpadlen) ---- reproducer.sh ---- Symlink filename fields handled in do_symlink() won't overrun past the data segment, due to the explicit zero-termination of the symlink target. Fix filename buffer overrun by aborting the initramfs FSM if any cpio entry doesn't carry a zero-terminator at the expected (name_len - 1) offset. | 7.8 |
High |
|
09h37 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add missing range check in bitmap_ip_uadt When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists, the values of ip and ip_to are slightly swapped. Therefore, the range check for ip should be done later, but this part is missing and it seems that the vulnerability occurs. So we should add missing range checks and remove unnecessary range checks. | 7.8 |
High |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netlink: terminate outstanding dump on socket close Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don't actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we're back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn't have to take a reference of its own. | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix possible UAF in sctp_v6_available()
A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints
that sctp_v6_available() is calling dev_get_by_index_rcu()
and ipv6_chk_addr() without holding rcu.
[1]
=============================
WARNING: suspicious RCU usage
6.12.0-rc5-virtme #1216 Tainted: G W
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by sctp_hello/31495:
#0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp
stack backtrace:
CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
|
7.8 |
High |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix incorrect page refcounting The kTLS tx handling code is using a mix of get_page() and page_ref_inc() APIs to increment the page reference. But on the release path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used. This is an issue when using pages from large folios: the get_page() references are stored on the folio page while the page_ref_inc() references are stored directly in the given page. On release the folio page will be dereferenced too many times. This was found while doing kTLS testing with sendfile() + ZC when the served file was read from NFS on a kernel with NFS large folios support (commit 49b29a573da8 ("nfs: add support for large folios")). | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ARM: fix cacheflush with PAN It seems that the cacheflush syscall got broken when PAN for LPAE was implemented. User access was not enabled around the cache maintenance instructions, causing them to fault. | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are myriad bugs in the implementation, some of which are fatal to the guest, and others which put the stability and health of the host at risk. For guest fatalities, the most glaring issue is that KVM fails to ensure tracing is disabled, and *stays* disabled prior to VM-Enter, which is necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing is enabled (enforced via a VMX consistency check). Per the SDM: If the logical processor is operating with Intel PT enabled (if IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load IA32_RTIT_CTL" VM-entry control must be 0. On the host side, KVM doesn't validate the guest CPUID configuration provided by userspace, and even worse, uses the guest configuration to decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring guest CPUID to enumerate more address ranges than are supported in hardware will result in KVM trying to passthrough, save, and load non-existent MSRs, which generates a variety of WARNs, ToPA ERRORs in the host, a potential deadlock, etc. | 6.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: correct remove path The check condition should be 'i < bc->onecell_data.num_domains', not 'bc->onecell_data.num_domains' which will make the look never finish and cause kernel panic. Also disable runtime to address "imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!" | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle dml allocation failure to avoid crash [Why] In the case where a dml allocation fails for any reason, the current state's dml contexts would no longer be valid. Then subsequent calls dc_state_copy_internal would shallow copy invalid memory and if the new state was released, a double free would occur. [How] Reset dml pointers in new_state to NULL and avoid invalid pointer (cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c) | 7.8 |
High |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix "Missing outer runtime PM protection" warning Fix the following drm_WARN: [953.586396] xe 0000:00:02.0: [drm] Missing outer runtime PM protection ... <4> [953.587090] ? xe_pm_runtime_get_noresume+0x8d/0xa0 [xe] <4> [953.587208] guc_exec_queue_add_msg+0x28/0x130 [xe] <4> [953.587319] guc_exec_queue_fini+0x3a/0x40 [xe] <4> [953.587425] xe_exec_queue_destroy+0xb3/0xf0 [xe] <4> [953.587515] xe_oa_release+0x9c/0xc0 [xe] (cherry picked from commit b107c63d2953907908fd0cafb0e543b3c3167b75) | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers When CONFIG_KASAN_SW_TAGS and CONFIG_KASAN_STACK are enabled, the object_is_on_stack() function may produce incorrect results due to the presence of tags in the obj pointer, while the stack pointer does not have tags. This discrepancy can lead to incorrect stack object detection and subsequently trigger warnings if CONFIG_DEBUG_OBJECTS is also enabled. Example of the warning: ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:557 __debug_object_init+0x330/0x364 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5 #4 Hardware name: linux,dummy-virt (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __debug_object_init+0x330/0x364 lr : __debug_object_init+0x330/0x364 sp : ffff800082ea7b40 x29: ffff800082ea7b40 x28: 98ff0000c0164518 x27: 98ff0000c0164534 x26: ffff800082d93ec8 x25: 0000000000000001 x24: 1cff0000c00172a0 x23: 0000000000000000 x22: ffff800082d93ed0 x21: ffff800081a24418 x20: 3eff800082ea7bb0 x19: efff800000000000 x18: 0000000000000000 x17: 00000000000000ff x16: 0000000000000047 x15: 206b63617473206e x14: 0000000000000018 x13: ffff800082ea7780 x12: 0ffff800082ea78e x11: 0ffff800082ea790 x10: 0ffff800082ea79d x9 : 34d77febe173e800 x8 : 34d77febe173e800 x7 : 0000000000000001 x6 : 0000000000000001 x5 : feff800082ea74b8 x4 : ffff800082870a90 x3 : ffff80008018d3c4 x2 : 0000000000000001 x1 : ffff800082858810 x0 : 0000000000000050 Call trace: __debug_object_init+0x330/0x364 debug_object_init_on_stack+0x30/0x3c schedule_hrtimeout_range_clock+0xac/0x26c schedule_hrtimeout+0x1c/0x30 wait_task_inactive+0x1d4/0x25c kthread_bind_mask+0x28/0x98 init_rescuer+0x1e8/0x280 workqueue_init+0x1a0/0x3cc kernel_init_freeable+0x118/0x200 kernel_init+0x28/0x1f0 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated. ------------[ cut here ]------------ | 5.5 |
Medium |
|
14h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K" The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K") increased the max_req_size, even for 4K pages, causing various issues: - Panic booting the kernel/rootfs from an SD card on Rockchip RK3566 - Panic booting the kernel/rootfs from an SD card on StarFive JH7100 - "swiotlb buffer is full" and data corruption on StarFive JH7110 At this stage no fix have been found, so it's probably better to just revert the change. This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: fix data-races around sk->sk_forward_alloc
Syzkaller reported this warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:inet_sock_destruct+0x1c5/0x1e0
Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00
RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206
RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007
RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00
RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007
R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00
R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78
FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
4.7 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mptcp: error out earlier on disconnect
Eric reported a division by zero splat in the MPTCP protocol:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted
6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163
Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8
0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mptcp: cope racing subflow creation in mptcp_rcv_space_adjust Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf(). | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fs, lock FTE when checking if active
The referenced commits introduced a two-step process for deleting FTEs:
- Lock the FTE, delete it from hardware, set the hardware deletion function
to NULL and unlock the FTE.
- Lock the parent flow group, delete the software copy of the FTE, and
remove it from the xarray.
However, this approach encounters a race condition if a rule with the same
match value is added simultaneously. In this scenario, fs_core may set the
hardware deletion function to NULL prematurely, causing a panic during
subsequent rule deletions.
To prevent this, ensure the active flag of the FTE is checked under a lock,
which will prevent the fs_core layer from attaching a new steering rule to
an FTE that is in the process of deletion.
[ 438.967589] MOSHE: 2496 mlx5_del_flow_rules del_hw_func
[ 438.968205] ------------[ cut here ]------------
[ 438.968654] refcount_t: decrement hit 0; leaking memory.
[ 438.969249] WARNING: CPU: 0 PID: 8957 at lib/refcount.c:31 refcount_warn_saturate+0xfb/0x110
[ 438.970054] Modules linked in: act_mirred cls_flower act_gact sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core zram zsmalloc fuse [last unloaded: cls_flower]
[ 438.973288] CPU: 0 UID: 0 PID: 8957 Comm: tc Not tainted 6.12.0-rc1+ #8
[ 438.973888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 438.974874] RIP: 0010:refcount_warn_saturate+0xfb/0x110
[ 438.975363] Code: 40 66 3b 82 c6 05 16 e9 4d 01 01 e8 1f 7c a0 ff 0f 0b c3 cc cc cc cc 48 c7 c7 10 66 3b 82 c6 05 fd e8 4d 01 01 e8 05 7c a0 ff <0f> 0b c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90
[ 438.976947] RSP: 0018:ffff888124a53610 EFLAGS: 00010286
[ 438.977446] RAX: 0000000000000000 RBX: ffff888119d56de0 RCX: 0000000000000000
[ 438.978090] RDX: ffff88852c828700 RSI: ffff88852c81b3c0 RDI: ffff88852c81b3c0
[ 438.978721] RBP: ffff888120fa0e88 R08: 0000000000000000 R09: ffff888124a534b0
[ 438.979353] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888119d56de0
[ 438.979979] R13: ffff888120fa0ec0 R14: ffff888120fa0ee8 R15: ffff888119d56de0
[ 438.980607] FS: 00007fe6dcc0f800(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
[ 438.983984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 438.984544] CR2: 00000000004275e0 CR3: 0000000186982001 CR4: 0000000000372eb0
[ 438.985205] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 438.985842] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 438.986507] Call Trace:
[ 438.986799] |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: CT: Fix null-ptr-deref in add rule err flow
In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add()
callback returns error, zone_rule->attr is used uninitiated. Fix it to
use attr which has the needed pointer value.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000110
RIP: 0010:mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core]
…
Call Trace:
|
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
virtio/vsock: Fix accept_queue memory leak
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[ |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix sk_error_queue memory leak
Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.
unreferenced object 0xffff8881028beb00 (size 224):
comm "vsock_test", pid 1218, jiffies 4294694897
hex dump (first 32 bytes):
90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!.....
00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!.....
backtrace (crc 6c7031ca):
[ |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Improve MSG_ZEROCOPY error handling Add a missing kfree_skb() to prevent memory leaks. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix handling of partial GPU mapping of BOs
This commit fixes the bug in the handling of partial mapping of the
buffer objects to the GPU, which caused kernel warnings.
Panthor didn't correctly handle the case where the partial mapping
spanned multiple scatterlists and the mapping offset didn't point
to the 1st page of starting scatterlist. The offset variable was
not cleared after reaching the starting scatterlist.
Following warning messages were seen.
WARNING: CPU: 1 PID: 650 at drivers/iommu/io-pgtable-arm.c:659 __arm_lpae_unmap+0x254/0x5a0
|
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid null_ptr_deref in vmw_framebuffer_surface_create_handle The 'vmw_user_object_buffer' function may return NULL with incorrect inputs. To avoid possible null pointer dereference, add a check whether the 'bo' is NULL in the vmw_framebuffer_surface_create_handle. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client A number of Zen4 client SoCs advertise the ability to use virtualized VMLOAD/VMSAVE, but using these instructions is reported to be a cause of a random host reboot. These instructions aren't intended to be advertised on Zen4 client so clear the capability. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm: fix NULL pointer dereference in alloc_pages_bulk_noprof We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in alloc_pages_bulk_noprof() when the task is migrated between cpusets. When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be ¤t->mems_allowed. when first_zones_zonelist() is called to find preferred_zoneref, the ac->nodemask may be modified concurrently if the task is migrated between different cpusets. Assuming we have 2 NUMA Node, when traversing Node1 in ac->zonelist, the nodemask is 2, and when traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the ac->preferred_zoneref points to NULL zone. In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading to NULL pointer dereference. __alloc_pages_noprof() fixes this issue by checking NULL pointer in commit ea57485af8f4 ("mm, page_alloc: fix check for NULL preferred_zone") and commit df76cee6bbeb ("mm, page_alloc: remove redundant checks from alloc fastpath"). To fix it, check NULL pointer for preferred_zoneref->zone. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: uncache inode which has failed entering the group
Syzbot has reported the following BUG:
kernel BUG at fs/ocfs2/uptodate.c:509!
...
Call Trace:
|
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mm/mremap: fix address wraparound in move_page_tables()
On 32-bit platforms, it is possible for the expression `len + old_addr <
old_end` to be false-positive if `len + old_addr` wraps around.
`old_addr` is the cursor in the old range up to which page table entries
have been moved; so if the operation succeeded, `old_addr` is the *end* of
the old region, and adding `len` to it can wrap.
The overflow causes mremap() to mistakenly believe that PTEs have been
copied; the consequence is that mremap() bails out, but doesn't move the
PTEs back before the new VMA is unmapped, causing anonymous pages in the
region to be lost. So basically if userspace tries to mremap() a
private-anon region and hits this bug, mremap() will return an error and
the private-anon region's contents appear to have been zeroed.
The idea of this check is that `old_end - len` is the original start
address, and writing the check that way also makes it easier to read; so
fix the check by rearranging the comparison accordingly.
(An alternate fix would be to refactor this function by introducing an
"orig_old_start" variable or such.)
Tested in a VM with a 32-bit X86 kernel; without the patch:
```
user@horn:~/big_mremap$ cat test.c
#define _GNU_SOURCE
#include |
5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vp_vdpa: fix id_table array not null terminated error Allocate one extra virtio_device_id as null terminator, otherwise vdpa_mgmtdev_get_classes() may iterate multiple times and visit undefined memory. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nommu: pass NULL argument to vma_iter_prealloc() When deleting a vma entry from a maple tree, it has to pass NULL to vma_iter_prealloc() in order to calculate internal state of the tree, but it passed a wrong argument. As a result, nommu kernels crashed upon accessing a vma iterator, such as acct_collect() reading the size of vma entries after do_munmap(). This commit fixes this issue by passing a right argument to the preallocation call. | 5.5 |
Medium |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust VSDB parser for replay feature At some point, the IEEE ID identification for the replay check in the AMD EDID was added. However, this check causes the following out-of-bounds issues when using KASAN: [ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu] [ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383 ... [ 27.821207] Memory state around the buggy address: [ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821243] ^ [ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821268] ================================================================== This is caused because the ID extraction happens outside of the range of the edid lenght. This commit addresses this issue by considering the amd_vsdb_block size. (cherry picked from commit b7e381b1ccd5e778e3d9c44c669ad38439a861d8) | 7.1 |
High |
|
13h44 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args() The "arg->vec_len" variable is a u64 that comes from the user at the start of the function. The "arg->vec_len * sizeof(struct page_region))" multiplication can lead to integer wrapping. Use size_mul() to avoid that. Also the size_add/mul() functions work on unsigned long so for 32bit systems we need to ensure that "arg->vec_len" fits in an unsigned long. | 5.5 |
Medium |
|
07h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format This can lead to out of bounds writes since frames of this type were not taken into account when calculating the size of the frames buffer in uvc_parse_streaming. | 7.8 |
High |
|
07h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer When hvs is released, there is a possibility that vsk->trans may not be initialized to NULL, which could lead to a dangling pointer. This issue is resolved by initializing vsk->trans to NULL. | 7.8 |
High |
|
21h21 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs: Fix uninitialized value issue in from_kuid and from_kgid ocfs2_setattr() uses attr->ia_mode, attr->ia_uid and attr->ia_gid in a trace point even though ATTR_MODE, ATTR_UID and ATTR_GID aren't set. Initialize all fields of newattrs to avoid uninitialized variables, by checking if ATTR_MODE, ATTR_UID, ATTR_GID are initialized, otherwise 0. | 5.5 |
Medium |
|
21h21 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
nvme: tcp: avoid race between queue_lock lock and destroy
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") added a mutex_lock() call for the queue->queue_lock
in nvme_tcp_get_address(). However, the mutex_lock() races with
mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220
Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs]
CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:__mutex_lock+0xcf0/0x1220
Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1
RSP: 0018:ffff88811305f760 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001
RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341
R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058
FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
4.7 |
Medium |
|
21h21 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Check validity of link->type in bpf_link_show_fdinfo() If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing bpf_link_type_strs[link->type] may result in an out-of-bounds access. To spot such missed invocations early in the future, checking the validity of link->type in bpf_link_show_fdinfo() and emitting a warning when such invocations are missed. | 7.1 |
High |
|
21h21 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/ufence: Prefetch ufence addr to catch bogus address access_ok() only checks for addr overflow so also try to read the addr to catch invalid addr sent from userspace. (cherry picked from commit 9408c4508483ffc60811e910a93d6425b8e63928) | 7.8 |
High |
|
21h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm: resolve faulty mmap_region() error path behaviour The mmap_region() function is somewhat terrifying, with spaghetti-like control flow and numerous means by which issues can arise and incomplete state, memory leaks and other unpleasantness can occur. A large amount of the complexity arises from trying to handle errors late in the process of mapping a VMA, which forms the basis of recently observed issues with resource leaks and observable inconsistent state. Taking advantage of previous patches in this series we move a number of checks earlier in the code, simplifying things by moving the core of the logic into a static internal function __mmap_region(). Doing this allows us to perform a number of checks up front before we do any real work, and allows us to unwind the writable unmap check unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE validation unconditionally also. We move a number of things here: 1. We preallocate memory for the iterator before we call the file-backed memory hook, allowing us to exit early and avoid having to perform complicated and error-prone close/free logic. We carefully free iterator state on both success and error paths. 2. The enclosing mmap_region() function handles the mapping_map_writable() logic early. Previously the logic had the mapping_map_writable() at the point of mapping a newly allocated file-backed VMA, and a matching mapping_unmap_writable() on success and error paths. We now do this unconditionally if this is a file-backed, shared writable mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however doing so does not invalidate the seal check we just performed, and we in any case always decrement the counter in the wrapper. We perform a debug assert to ensure a driver does not attempt to do the opposite. 3. We also move arch_validate_flags() up into the mmap_region() function. This is only relevant on arm64 and sparc64, and the check is only meaningful for SPARC with ADI enabled. We explicitly add a warning for this arch if a driver invalidates this check, though the code ought eventually to be fixed to eliminate the need for this. With all of these measures in place, we no longer need to explicitly close the VMA on error paths, as we place all checks which might fail prior to a call to any driver mmap hook. This eliminates an entire class of errors, makes the code easier to reason about and more robust. | 7.8 |
High |
|
18h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES While running ISER over SIW, the initiator machine encounters a warning from skb_splice_from_iter() indicating that a slab page is being used in send_page. To address this, it is better to add a sendpage_ok() check within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag should be disabled before entering the network stack. A similar issue has been discussed for NVMe in this thread: https://lore.kernel.org/all/[email protected]/ WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320 Call Trace: tcp_sendmsg_locked+0x368/0xe40 siw_tx_hdt+0x695/0xa40 [siw] siw_qp_sq_process+0x102/0xb00 [siw] siw_sq_resume+0x39/0x110 [siw] siw_run_sq+0x74/0x160 [siw] kthread+0xd2/0x100 ret_from_fork+0x34/0x40 ret_from_fork_asm+0x1a/0x30 | 5.5 |
Medium |
|
18h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: defer partition scanning We need to suppress the partition scan from occuring within the controller's scan_work context. If a path error occurs here, the IO will wait until a path becomes available or all paths are torn down, but that action also occurs within scan_work, so it would deadlock. Defer the partion scan to a different context that does not block scan_work. | 5.5 |
Medium |
|
18h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
virtio_pci: Fix admin vq cleanup by using correct info pointer
vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq
resources by virtio_pci_vq_info pointer. The info pointer of admin
vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[].
Using the info pointer from vp_dev->vqs[] for admin vq causes a
kernel NULL pointer dereference bug.
In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer
from vp_dev->admin_vq.info for admin vq to clean up the resources.
Also make info ptr as argument of vp_del_vq() to be symmetric with
vp_setup_vq().
vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace:
==================================================================
BUG: kernel NULL pointer dereference, address:0000000000000000
...
CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1
RIP: 0010:vp_reset+0x57/0x90 [virtio_pci]
Call Trace:
|
5.5 |
Medium |
|
18h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx As the introduction of the support for vsock and unix sockets in sockmap, tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK. vsock and af_unix sockets have vsock_sock and unix_sock instead of inet_connection_sock. For these sockets, tls_get_ctx may return an invalid pointer and cause page fault in function tls_sw_ctx_rx. BUG: unable to handle page fault for address: 0000000000040030 Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:sk_psock_strp_data_ready+0x23/0x60 Call Trace: ? __die+0x81/0xc3 ? no_context+0x194/0x350 ? do_page_fault+0x30/0x110 ? async_page_fault+0x3e/0x50 ? sk_psock_strp_data_ready+0x23/0x60 virtio_transport_recv_pkt+0x750/0x800 ? update_load_avg+0x7e/0x620 vsock_loopback_work+0xd0/0x100 process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? __kthread_cancel_work+0x40/0x40 ret_from_fork+0x1f/0x40 v2: - Add IS_ICSK check v3: - Update the commits in Fixes | 5.5 |
Medium |
|
18h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
afs: Fix lock recursion
afs_wake_up_async_call() can incur lock recursion. The problem is that it
is called from AF_RXRPC whilst holding the ->notify_lock, but it tries to
take a ref on the afs_call struct in order to pass it to a work queue - but
if the afs_call is already queued, we then have an extraneous ref that must
be put... calling afs_put_call() may call back down into AF_RXRPC through
rxrpc_kernel_shutdown_call(), however, which might try taking the
->notify_lock again.
This case isn't very common, however, so defer it to a workqueue. The oops
looks something like:
BUG: spinlock recursion on CPU#0, krxrpcio/7001/1646
lock: 0xffff888141399b30, .magic: dead4ead, .owner: krxrpcio/7001/1646, .owner_cpu: 0
CPU: 0 UID: 0 PID: 1646 Comm: krxrpcio/7001 Not tainted 6.12.0-rc2-build3+ #4351
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
|
5.5 |
Medium |
|
18h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Mark hrtimer to expire in hard interrupt context
Like commit 2c0d278f3293f ("KVM: LAPIC: Mark hrtimer to expire in hard
interrupt context") and commit 9090825fa9974 ("KVM: arm/arm64: Let the
timer expire in hardirq context on RT"), On PREEMPT_RT enabled kernels
unmarked hrtimers are moved into soft interrupt expiry mode by default.
Then the timers are canceled from an preempt-notifier which is invoked
with disabled preemption which is not allowed on PREEMPT_RT.
The timer callback is short so in could be invoked in hard-IRQ context.
So let the timer expire on hard-IRQ context even on -RT.
This fix a "scheduling while atomic" bug for PREEMPT_RT enabled kernels:
BUG: scheduling while atomic: qemu-system-loo/1011/0x00000002
Modules linked in: amdgpu rfkill nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat ns
CPU: 1 UID: 0 PID: 1011 Comm: qemu-system-loo Tainted: G W 6.12.0-rc2+ #1774
Tainted: [W]=WARN
Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022
Stack : ffffffffffffffff 0000000000000000 9000000004e3ea38 9000000116744000
90000001167475a0 0000000000000000 90000001167475a8 9000000005644830
90000000058dc000 90000000058dbff8 9000000116747420 0000000000000001
0000000000000001 6a613fc938313980 000000000790c000 90000001001c1140
00000000000003fe 0000000000000001 000000000000000d 0000000000000003
0000000000000030 00000000000003f3 000000000790c000 9000000116747830
90000000057ef000 0000000000000000 9000000005644830 0000000000000004
0000000000000000 90000000057f4b58 0000000000000001 9000000116747868
900000000451b600 9000000005644830 9000000003a13998 0000000010000020
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d
...
Call Trace:
[<9000000003a13998>] show_stack+0x38/0x180
[<9000000004e3ea34>] dump_stack_lvl+0x84/0xc0
[<9000000003a71708>] __schedule_bug+0x48/0x60
[<9000000004e45734>] __schedule+0x1114/0x1660
[<9000000004e46040>] schedule_rtlock+0x20/0x60
[<9000000004e4e330>] rtlock_slowlock_locked+0x3f0/0x10a0
[<9000000004e4f038>] rt_spin_lock+0x58/0x80
[<9000000003b02d68>] hrtimer_cancel_wait_running+0x68/0xc0
[<9000000003b02e30>] hrtimer_cancel+0x70/0x80
[ |
5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i40e: fix race condition by adding filter's intermediate sync state Fix a race condition in the i40e driver that leads to MAC/VLAN filters becoming corrupted and leaking. Address the issue that occurs under heavy load when multiple threads are concurrently modifying MAC/VLAN filters by setting mac and port VLAN. 1. Thread T0 allocates a filter in i40e_add_filter() within i40e_ndo_set_vf_port_vlan(). 2. Thread T1 concurrently frees the filter in __i40e_del_filter() within i40e_ndo_set_vf_mac(). 3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which refers to the already freed filter memory, causing corruption. Reproduction steps: 1. Spawn multiple VFs. 2. Apply a concurrent heavy load by running parallel operations to change MAC addresses on the VFs and change port VLANs on the host. 3. Observe errors in dmesg: "Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX, please set promiscuous on manually for VF XX". Exact code for stable reproduction Intel can't open-source now. The fix involves implementing a new intermediate filter state, I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list. These filters cannot be deleted from the hash list directly but must be removed using the full process. | 4.7 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix possible exec queue leak in exec IOCTL In a couple of places after an exec queue is looked up the exec IOCTL returns on input errors without dropping the exec queue ref. Fix this ensuring the exec queue ref is dropped on input error. (cherry picked from commit 07064a200b40ac2195cb6b7b779897d9377e5e6f) | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Drop VM dma-resv lock on xe_sync_in_fence_get failure in exec IOCTL Upon failure all locks need to be dropped before returning to the user. (cherry picked from commit 7d1a4258e602ffdce529f56686925034c1b3b095) | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tpm: Lock TPM chip in tpm_pm_suspend() first Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy according, as this leaves window for tpm_hwrng_read() to be called while the operation is in progress. The recent bug report gives also evidence of this behaviour. Aadress this by locking the TPM chip before checking any chip->flags both in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED check inside tpm_get_random() so that it will be always checked only when the lock is reserved. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Break an object reference loop When remaining resources are being cleaned up on driver close, outstanding VM mappings may result in resources being leaked, due to an object reference loop, as shown below, with each object (or set of objects) referencing the object below it: PVR GEM Object GPU scheduler "finished" fence GPU scheduler “scheduled” fence PVR driver “done” fence PVR Context PVR VM Context PVR VM Mappings PVR GEM Object The reference that the PVR VM Context has on the VM mappings is a soft one, in the sense that the freeing of outstanding VM mappings is done as part of VM context destruction; no reference counts are involved, as is the case for all the other references in the loop. To break the reference loop during cleanup, free the outstanding VM mappings before destroying the PVR Context associated with the VM context. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and txbuf_len are uninitialized. This commit stops to print uninitialized value and misleading/false data. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: virtio_net: Add hash_key_length check Add hash_key_length check in virtnet_probe() to avoid possible out of bound errors when setting/reading the hash key. | 7.1 |
High |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: ar0521: don't overflow when checking PLL values The PLL checks are comparing 64 bit integers with 32 bit ones, as reported by Coverity. Depending on the values of the variables, this may underflow. Fix it ensuring that both sides of the expression are u64. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Lock XArray when getting entries for the VM Similar to commit cac075706f29 ("drm/panthor: Fix race when converting group handle to group object") we need to use the XArray's internal locking when retrieving a vm pointer from there. v2: Removed part of the patch that was trying to protect fetching the heap pointer from XArray, as that operation is protected by the @pool->lock. | 5.5 |
Medium |
|
17h45 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/thp: fix deferred split unqueue naming and locking Recent changes are putting more pressure on THP deferred split queues: under load revealing long-standing races, causing list_del corruptions, "Bad page state"s and worse (I keep BUGs in both of those, so usually don't get to see how badly they end up without). The relevant recent changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin, improved swap allocation, and underused THP splitting. Before fixing locking: rename misleading folio_undo_large_rmappable(), which does not undo large_rmappable, to folio_unqueue_deferred_split(), which is what it does. But that and its out-of-line __callee are mm internals of very limited usability: add comment and WARN_ON_ONCEs to check usage; and return a bool to say if a deferred split was unqueued, which can then be used in WARN_ON_ONCEs around safety checks (sparing callers the arcane conditionals in __folio_unqueue_deferred_split()). Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all of whose callers now call it beforehand (and if any forget then bad_page() will tell) - except for its caller put_pages_list(), which itself no longer has any callers (and will be deleted separately). Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0 without checking and unqueueing a THP folio from deferred split list; which is unfortunate, since the split_queue_lock depends on the memcg (when memcg is enabled); so swapout has been unqueueing such THPs later, when freeing the folio, using the pgdat's lock instead: potentially corrupting the memcg's list. __remove_mapping() has frozen refcount to 0 here, so no problem with calling folio_unqueue_deferred_split() before resetting memcg_data. That goes back to 5.4 commit 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware"): which included a check on swapcache before adding to deferred queue, but no check on deferred queue before adding THP to swapcache. That worked fine with the usual sequence of events in reclaim (though there were a couple of rare ways in which a THP on deferred queue could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split underused THPs") avoids splitting underused THPs in reclaim, which makes swapcache THPs on deferred queue commonplace. Keep the check on swapcache before adding to deferred queue? Yes: it is no longer essential, but preserves the existing behaviour, and is likely to be a worthwhile optimization (vmstat showed much more traffic on the queue under swapping load if the check was removed); update its comment. Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing folio->memcg_data without checking and unqueueing a THP folio from the deferred list, sometimes corrupting "from" memcg's list, like swapout. Refcount is non-zero here, so folio_unqueue_deferred_split() can only be used in a WARN_ON_ONCE to validate the fix, which must be done earlier: mem_cgroup_move_charge_pte_range() first try to split the THP (splitting of course unqueues), or skip it if that fails. Not ideal, but moving charge has been requested, and khugepaged should repair the THP later: nobody wants new custom unqueueing code just for this deprecated case. The 87eaceb3faa5 commit did have the code to move from one deferred list to another (but was not conscious of its unsafety while refcount non-0); but that was removed by 5.6 commit fac0516b5534 ("mm: thp: don't need care deferred split queue in memcg charge move path"), which argued that the existence of a PMD mapping guarantees that the THP cannot be on a deferred list. As above, false in rare cases, and now commonly false. Backport to 6.11 should be straightforward. Earlier backports must take care that other _deferred_list fixes and dependencies are included. There is not a strong case for backports, but they can fix cornercases. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix NULL vs IS_ERR() check in probe() The iommu_paging_domain_alloc() function doesn't return NULL pointers, it returns error pointers. Update the check to match. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: rpcrdma: Always release the rpcrdma_device's xa_array Dai pointed out that the xa_init_flags() in rpcrdma_add_one() needs to have a matching xa_destroy() in rpcrdma_remove_one() to release underlying memory that the xarray might have accrued during operation. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table() If per_time_scales[i] or per_time_gains[i] kcalloc fails in the for loop of iio_gts_build_avail_scale_table(), the err_free_out will fail to call kfree() each time when i is reduced to 0, so all the per_time_scales[0] and per_time_gains[0] will not be freed, which will cause memory leaks. Fix it by checking if i >= 0. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: riscv: Prevent a bad reference count on CPU nodes When populating cache leaves we previously fetched the CPU device node at the very beginning. But when ACPI is enabled we go through a specific branch which returns early and does not call 'of_node_put' for the node that was acquired. Since we are not using a CPU device node for the ACPI code anyways, we can simply move the initialization of it just passed the ACPI block, and we are guaranteed to have an 'of_node_put' call for the acquired node. This prevents a bad reference count of the CPU device node. Moreover, the previous function did not check for errors when acquiring the device node, so a return -ENOENT has been added for that case. | 5.5 |
Medium |
|
17h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't leak a link on AP removal Release the link mapping resource in AP removal. This impacted devices that do not support the MLD API (9260 and down). On those devices, we couldn't start the AP again after the AP has been already started and stopped. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Detect when STB is not available Loading the amd_pmc module as: amd_pmc enable_stb=1 ...can result in the following messages in the kernel ring buffer: amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340 Further debugging reveals that this occurs when the requests for S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0, indicating that the STB is inaccessible. To prevent the ioremap warning and provide clarity to the user, handle the invalid address and display an error message. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Be stricter about IO mapping flags The current panthor_device_mmap_io() implementation has two issues: 1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET, panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear VM_MAYWRITE. That means userspace can use mprotect() to make the mapping writable later on. This is a classic Linux driver gotcha. I don't think this actually has any impact in practice: When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and when the GPU is not powered, the dummy_latest_flush page provided by the driver is deliberately designed to not do any flushes, so the only thing writing to the dummy_latest_flush could achieve would be to make *more* flushes happen. 2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are mappings without the VM_SHARED flag). MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has copy-on-write semantics, which for VM_PFNMAP are semi-supported but fairly cursed. In particular, in such a mapping, the driver can only install PTEs during mmap() by calling remap_pfn_range() (because remap_pfn_range() wants to **store the physical address of the mapped physical memory into the vm_pgoff of the VMA**); installing PTEs later on with a fault handler (as panthor does) is not supported in private mappings, and so if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when it hits a BUG() check. Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for the FLUSH_ID don't make sense). Reproducers for both scenarios are in the notes of my patch on the mailing list; I tested that these bugs exist on a Rock 5B machine. Note that I only compile-tested the patch, I haven't tested it; I don't have a working kernel build setup for the test machine yet. Please test it before applying it. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: fix a NULL-pointer dereference Some SCM calls can be invoked with __scm being NULL (the driver may not have been and will not be probed as there's no SCM entry in device-tree). Make sure we don't dereference a NULL pointer. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier() The scmi_dev->name is released prematurely in __scmi_device_destroy(), which causes slab-use-after-free when accessing scmi_dev->name in scmi_bus_notifier(). So move the release of scmi_dev->name to scmi_device_release() to avoid slab-use-after-free. | BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec | Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1 | | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1 | Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT) | Call trace: | dump_backtrace+0x94/0x114 | show_stack+0x18/0x24 | dump_stack_lvl+0x48/0x60 | print_report+0xf4/0x5b0 | kasan_report+0xa4/0xec | __asan_report_load1_noabort+0x20/0x2c | strncmp+0xe4/0xec | scmi_bus_notifier+0x5c/0x54c | notifier_call_chain+0xb4/0x31c | blocking_notifier_call_chain+0x68/0x9c | bus_notify+0x54/0x78 | device_del+0x1bc/0x840 | device_unregister+0x20/0xb4 | __scmi_device_destroy+0xac/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Allocated by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_alloc_info+0x24/0x34 | __kasan_kmalloc+0xa0/0xb8 | __kmalloc_node_track_caller+0x6c/0x104 | kstrdup+0x48/0x84 | kstrdup_const+0x34/0x40 | __scmi_device_create.part.0+0x8c/0x408 | scmi_device_create+0x104/0x370 | scmi_chan_setup+0x2a0/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Freed by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_free_info+0x38/0x5c | __kasan_slab_free+0xe8/0x164 | __kmem_cache_free+0x11c/0x230 | kfree+0x70/0x130 | kfree_const+0x20/0x40 | __scmi_device_destroy+0x70/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | 7.8 |
High |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Start the RTC update work later The RTC update work involves runtime resuming the UFS controller. Hence, only start the RTC update work after runtime power management in the UFS driver has been fully initialized. This patch fixes the following kernel crash: Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) pm_runtime_get_if_active+0x24/0x9c (L) pm_runtime_get_if_active+0x24/0x9c ufshcd_rtc_work+0x138/0x1b4 process_one_work+0x148/0x288 worker_thread+0x2cc/0x3d4 kthread+0x110/0x114 ret_from_fork+0x10/0x20 | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfs: Fix KMSAN warning in decode_getfattr_attrs() Fix the following KMSAN warning: CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B Tainted: [B]=BAD_PAGE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) ===================================================== ===================================================== BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_generic+0x806/0xb00 nfs4_xdr_dec_getattr+0x1de/0x240 rpcauth_unwrap_resp_decode+0xab/0x100 rpcauth_unwrap_resp+0x95/0xc0 call_decode+0x4ff/0xb50 __rpc_execute+0x57b/0x19d0 rpc_execute+0x368/0x5e0 rpc_run_task+0xcfe/0xee0 nfs4_proc_getattr+0x5b5/0x990 __nfs_revalidate_inode+0x477/0xd00 nfs_access_get_cached+0x1021/0x1cc0 nfs_do_access+0x9f/0xae0 nfs_permission+0x1e4/0x8c0 inode_permission+0x356/0x6c0 link_path_walk+0x958/0x1330 path_lookupat+0xce/0x6b0 filename_lookup+0x23e/0x770 vfs_statx+0xe7/0x970 vfs_fstatat+0x1f2/0x2c0 __se_sys_newfstatat+0x67/0x880 __x64_sys_newfstatat+0xbd/0x120 x64_sys_call+0x1826/0x3cf0 do_syscall_64+0xd0/0x1b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The KMSAN warning is triggered in decode_getfattr_attrs(), when calling decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not initialized. Fix the issue by initializing fattr->mdsthreshold to NULL in nfs_fattr_init(). | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64. However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16. This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16], resulting in kmem_buckets_create() attempting to create a kmem_cache for size 16 twice. This duplication triggers warnings on boot: [ 2.325108] ------------[ cut here ]------------ [ 2.325135] kmem_cache of name 'memdup_user-16' already exists [ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.327957] Modules linked in: [ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328942] sp : ffff800083d6fc50 [ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598 [ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000 [ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030 [ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.329291] Call trace: [ 2.329407] __kmem_cache_create_args+0xb8/0x3b0 [ 2.329499] kmem_buckets_create+0xfc/0x320 [ 2.329526] init_user_buckets+0x34/0x78 [ 2.329540] do_one_initcall+0x64/0x3c8 [ 2.329550] kernel_init_freeable+0x26c/0x578 [ 2.329562] kernel_init+0x3c/0x258 [ 2.329574] ret_from_fork+0x10/0x20 [ 2.329698] ---[ end trace 0000000000000000 ]--- [ 2.403704] ------------[ cut here ]------------ [ 2.404716] kmem_cache of name 'msg_msg-16' already exists [ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.404842] Modules linked in: [ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.405026] Tainted: [W]=WARN [ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405111] sp : ffff800083d6fc50 [ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598 [ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000 [ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030 [ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.405287] Call trace: [ 2 ---truncated--- | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: prevent the risk of out of memory access The dvbdev contains a static variable used to store dvb minors. The behavior of it depends if CONFIG_DVB_DYNAMIC_MINORS is set or not. When not set, dvb_register_device() won't check for boundaries, as it will rely that a previous call to dvb_register_adapter() would already be enforcing it. On a similar way, dvb_device_open() uses the assumption that the register functions already did the needed checks. This can be fragile if some device ends using different calls. This also generate warnings on static check analysers like Coverity. So, add explicit guards to prevent potential risk of OOM issues. | 5.5 |
Medium |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: mgb4: protect driver against spectre Frequency range is set from sysfs via frequency_range_store(), being vulnerable to spectre, as reported by smatch: drivers/media/pci/mgb4/mgb4_cmt.c:231 mgb4_cmt_set_vin_freq_range() warn: potential spectre issue 'cmt_vals_in' [r] drivers/media/pci/mgb4/mgb4_cmt.c:238 mgb4_cmt_set_vin_freq_range() warn: possible spectre second half. 'reg_set' Fix it. | 7.1 |
High |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: s5p-jpeg: prevent buffer overflows The current logic allows word to be less than 2. If this happens, there will be buffer overflows, as reported by smatch. Add extra checks to prevent it. While here, remove an unused word = 0 assignment. | 7.8 |
High |
|
17h22 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent NULL pointer dereference if ATIF is not supported acpi_evaluate_object() may return AE_NOT_FOUND (failure), which would result in dereferencing buffer.pointer (obj) while being NULL. Although this case may be unrealistic for the current code, it is still better to protect against possible bugs. Bail out also when status is AE_NOT_FOUND. This fixes 1 FORWARD_NULL issue reported by Coverity Report: CID 1600951: Null pointer dereferences (FORWARD_NULL) (cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1) | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd() 1. The size of the response packet is not validated. 2. The response buffer is not freed. Resolve these issues by switching to iwl_mvm_send_cmd_status(), which handles both size validation and frees the buffer. | 7.8 |
High |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data In case the non-paged data of a SKB carries protocol header and protocol payload to be transmitted on a certain platform that the DMA AXI address width is configured to 40-bit/48-bit, or the size of the non-paged data is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI address width is configured to 32-bit, then this SKB requires at least two DMA transmit descriptors to serve it. For example, three descriptors are allocated to split one DMA buffer mapped from one piece of non-paged data: dma_desc[N + 0], dma_desc[N + 1], dma_desc[N + 2]. Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold extra information to be reused in stmmac_tx_clean(): tx_q->tx_skbuff_dma[N + 0], tx_q->tx_skbuff_dma[N + 1], tx_q->tx_skbuff_dma[N + 2]. Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer address returned by DMA mapping call. stmmac_tx_clean() will try to unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf is a valid buffer address. The expected behavior that saves DMA buffer address of this non-paged data to tx_q->tx_skbuff_dma[entry].buf is: tx_q->tx_skbuff_dma[N + 0].buf = NULL; tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single(); Unfortunately, the current code misbehaves like this: tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single(); tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = NULL; On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address obviously, then the DMA buffer will be unmapped immediately. There may be a rare case that the DMA engine does not finish the pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go horribly wrong, DMA is going to access a unmapped/unreferenced memory region, corrupted data will be transmited or iommu fault will be triggered :( In contrast, the for-loop that maps SKB fragments behaves perfectly as expected, and that is how the driver should do for both non-paged data and paged frags actually. This patch corrects DMA map/unmap sequences by fixing the array index for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address. Tested and verified on DWXGMAC CORE 3.20a | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff: Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer. In 066a3b5b2346, the concern was to avoid iterating over the ingress qdisc since its parent is itself. The proper fix is to stop when parent TC_H_ROOT is reached because the only way to retrieve ingress is when a hierarchy which does not contain a ffff: major handle call into qdisc_lookup with TC_H_MAJ(TC_H_ROOT). In the scenario where major ffff: is an egress qdisc in any of the tree levels, the updates will also propagate to TC_H_ROOT, which then the iteration must stop. net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) | 7.8 |
High |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and it will result in a NULL pointer dereference. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix 6 GHz scan construction If more than 255 colocated APs exist for the set of all APs found during 2.4/5 GHz scanning, then the 6 GHz scan construction will loop forever since the loop variable has type u8, which can never reach the number found when that's bigger than 255, and is stored in a u32 variable. Also move it into the loops to have a smaller scope. Using a u32 there is fine, we limit the number of APs in the scan list and each has a limit on the number of RNR entries due to the frame size. With a limit of 1000 scan results, a frame size upper bound of 4096 (really it's more like ~2300) and a TBTT entry size of at least 11, we get an upper bound for the number of ~372k, well in the bounds of a u32. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix another deadlock during RTC update If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count is 0, we will enter the runtime suspend callback. However, the runtime suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock. Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the deadlock. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: fix missing NOWAIT check for O_DIRECT start write When io_uring starts a write, it'll call kiocb_start_write() to bump the super block rwsem, preventing any freezes from happening while that write is in-flight. The freeze side will grab that rwsem for writing, excluding any new writers from happening and waiting for existing writes to finish. But io_uring unconditionally uses kiocb_start_write(), which will block if someone is currently attempting to freeze the mount point. This causes a deadlock where freeze is waiting for previous writes to complete, but the previous writes cannot complete, as the task that is supposed to complete them is blocked waiting on starting a new write. This results in the following stuck trace showing that dependency with the write blocked starting a new write: task:fio state:D stack:0 pid:886 tgid:886 ppid:876 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_rwsem_wait+0x1e8/0x3f8 __percpu_down_read+0xe8/0x500 io_write+0xbb8/0xff8 io_issue_sqe+0x10c/0x1020 io_submit_sqes+0x614/0x2110 __arm64_sys_io_uring_enter+0x524/0x1038 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 INFO: task fsfreeze:7364 blocked for more than 15 seconds. Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963 with the attempting freezer stuck trying to grab the rwsem: task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995 Call trace: __switch_to+0x1d8/0x348 __schedule+0x8e8/0x2248 schedule+0x110/0x3f0 percpu_down_write+0x2b0/0x680 freeze_super+0x248/0x8a8 do_vfs_ioctl+0x149c/0x1b18 __arm64_sys_ioctl+0xd0/0x1a0 invoke_syscall+0x74/0x268 el0_svc_common.constprop.0+0x160/0x238 do_el0_svc+0x44/0x60 el0_svc+0x44/0xb0 el0t_64_sync_handler+0x118/0x128 el0t_64_sync+0x168/0x170 Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a blocking grab of the super block rwsem if it isn't set. For normal issue where IOCB_NOWAIT would always be set, this returns -EAGAIN which will have io_uring core issue a blocking attempt of the write. That will in turn also get completions run, ensuring forward progress. Since freezing requires CAP_SYS_ADMIN in the first place, this isn't something that can be triggered by a regular user. | 4.4 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: Add encoder check in intel_hdcp_get_capability Sometimes during hotplug scenario or suspend/resume scenario encoder is not always initialized when intel_hdcp_get_capability add a check to avoid kernel null pointer dereference. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: Add encoder check in hdcp2_get_capability Add encoder check in intel_hdcp2_get_capability to avoid null pointer error. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof 'modprobe slub_kunit' will have a warning as shown below. The root cause is that __kmalloc_cache_noprof was directly used, which resulted in no alloc_tag being allocated. This caused current->alloc_tag to be null, leading to a warning in alloc_tag_add_check. Let's add an alloc_hook layer to __kmalloc_cache_noprof specifically within lib/slub_kunit.c, which is the only user of this internal slub function outside kmalloc implementation itself. [58162.947016] WARNING: CPU: 2 PID: 6210 at ./include/linux/alloc_tag.h:125 alloc_tagging_slab_alloc_hook+0x268/0x27c [58162.957721] Call trace: [58162.957919] alloc_tagging_slab_alloc_hook+0x268/0x27c [58162.958286] __kmalloc_cache_noprof+0x14c/0x344 [58162.958615] test_kmalloc_redzone_access+0x50/0x10c [slub_kunit] [58162.959045] kunit_try_run_case+0x74/0x184 [kunit] [58162.959401] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit] [58162.959841] kthread+0x10c/0x118 [58162.960093] ret_from_fork+0x10/0x20 [58162.960363] ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ice: fix crash on probe for DPLL enabled E810 LOM
The E810 Lan On Motherboard (LOM) design is vendor specific. Intel
provides the reference design, but it is up to vendor on the final
product design. For some cases, like Linux DPLL support, the static
values defined in the driver does not reflect the actual LOM design.
Current implementation of dpll pins is causing the crash on probe
of the ice driver for such DPLL enabled E810 LOM designs:
WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330
...
Call Trace:
|
5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mptcp: init: protect sched with rcu_read_lock
Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT
creates this splat when an MPTCP socket is created:
=============================
WARNING: suspicious RCU usage
6.12.0-rc2+ #11 Not tainted
-----------------------------
net/mptcp/sched.c:44 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by mptcp_connect/176.
stack backtrace:
CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
|
5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64: dts: imx8ulp: correct the flexspi compatible string The flexspi on imx8ulp only has 16 LUTs, and imx8mm flexspi has 32 LUTs, so correct the compatible string here, otherwise will meet below error: [ 1.119072] ------------[ cut here ]------------ [ 1.123926] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-nxp-fspi.c:855 nxp_fspi_exec_op+0xb04/0xb64 [ 1.133239] Modules linked in: [ 1.136448] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc6-next-20240902-00001-g131bf9439dd9 #69 [ 1.146821] Hardware name: NXP i.MX8ULP EVK (DT) [ 1.151647] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.158931] pc : nxp_fspi_exec_op+0xb04/0xb64 [ 1.163496] lr : nxp_fspi_exec_op+0xa34/0xb64 [ 1.168060] sp : ffff80008002b2a0 [ 1.171526] x29: ffff80008002b2d0 x28: 0000000000000000 x27: 0000000000000000 [ 1.179002] x26: ffff2eb645542580 x25: ffff800080610014 x24: ffff800080610000 [ 1.186480] x23: ffff2eb645548080 x22: 0000000000000006 x21: ffff2eb6455425e0 [ 1.193956] x20: 0000000000000000 x19: ffff80008002b5e0 x18: ffffffffffffffff [ 1.201432] x17: ffff2eb644467508 x16: 0000000000000138 x15: 0000000000000002 [ 1.208907] x14: 0000000000000000 x13: ffff2eb6400d8080 x12: 00000000ffffff00 [ 1.216378] x11: 0000000000000000 x10: ffff2eb6400d8080 x9 : ffff2eb697adca80 [ 1.223850] x8 : ffff2eb697ad3cc0 x7 : 0000000100000000 x6 : 0000000000000001 [ 1.231324] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000007a6 [ 1.238795] x2 : 0000000000000000 x1 : 00000000000001ce x0 : 00000000ffffff92 [ 1.246267] Call trace: [ 1.248824] nxp_fspi_exec_op+0xb04/0xb64 [ 1.253031] spi_mem_exec_op+0x3a0/0x430 [ 1.257139] spi_nor_read_id+0x80/0xcc [ 1.261065] spi_nor_scan+0x1ec/0xf10 [ 1.264901] spi_nor_probe+0x108/0x2fc [ 1.268828] spi_mem_probe+0x6c/0xbc [ 1.272574] spi_probe+0x84/0xe4 [ 1.275958] really_probe+0xbc/0x29c [ 1.279713] __driver_probe_device+0x78/0x12c [ 1.284277] driver_probe_device+0xd8/0x15c [ 1.288660] __device_attach_driver+0xb8/0x134 [ 1.293316] bus_for_each_drv+0x88/0xe8 [ 1.297337] __device_attach+0xa0/0x190 [ 1.301353] device_initial_probe+0x14/0x20 [ 1.305734] bus_probe_device+0xac/0xb0 [ 1.309752] device_add+0x5d0/0x790 [ 1.313408] __spi_add_device+0x134/0x204 [ 1.317606] of_register_spi_device+0x3b4/0x590 [ 1.322348] spi_register_controller+0x47c/0x754 [ 1.327181] devm_spi_register_controller+0x4c/0xa4 [ 1.332289] nxp_fspi_probe+0x1cc/0x2b0 [ 1.336307] platform_probe+0x68/0xc4 [ 1.340145] really_probe+0xbc/0x29c [ 1.343893] __driver_probe_device+0x78/0x12c [ 1.348457] driver_probe_device+0xd8/0x15c [ 1.352838] __driver_attach+0x90/0x19c [ 1.356857] bus_for_each_dev+0x7c/0xdc [ 1.360877] driver_attach+0x24/0x30 [ 1.364624] bus_add_driver+0xe4/0x208 [ 1.368552] driver_register+0x5c/0x124 [ 1.372573] __platform_driver_register+0x28/0x34 [ 1.377497] nxp_fspi_driver_init+0x1c/0x28 [ 1.381888] do_one_initcall+0x80/0x1c8 [ 1.385908] kernel_init_freeable+0x1c4/0x28c [ 1.390472] kernel_init+0x20/0x1d8 [ 1.394138] ret_from_fork+0x10/0x20 [ 1.397885] ---[ end trace 0000000000000000 ]--- [ 1.407908] ------------[ cut here ]------------ | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: fix bounds checker error in dapm_widget_list_create The widgets array in the snd_soc_dapm_widget_list has a __counted_by attribute attached to it, which points to the num_widgets variable. This attribute is used in bounds checking, and if it is not set before the array is filled, then the bounds sanitizer will issue a warning or a kernel panic if CONFIG_UBSAN_TRAP is set. This patch sets the size of the widgets list calculated with list_for_each as the initial value for num_widgets as it is used for allocating memory for the array. It is updated with the actual number of added elements after the array is filled. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_api: fix xa_insert() error path in tcf_block_get_ext() This command: $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: block dev insert failed: -EBUSY. fails because user space requests the same block index to be set for both ingress and egress. [ side note, I don't think it even failed prior to commit 913b47d3424e ("net/sched: Introduce tc block netdev tracking infra"), because this is a command from an old set of notes of mine which used to work, but alas, I did not scientifically bisect this ] The problem is not that it fails, but rather, that the second time around, it fails differently (and irrecoverably): $ tc qdisc replace dev eth0 ingress_block 1 egress_block 1 clsact Error: dsa_core: Flow block cb is busy. [ another note: the extack is added by me for illustration purposes. the context of the problem is that clsact_init() obtains the same &q->ingress_block pointer as &q->egress_block, and since we call tcf_block_get_ext() on both of them, "dev" will be added to the block->ports xarray twice, thus failing the operation: once through the ingress block pointer, and once again through the egress block pointer. the problem itself is that when xa_insert() fails, we have emitted a FLOW_BLOCK_BIND command through ndo_setup_tc(), but the offload never sees a corresponding FLOW_BLOCK_UNBIND. ] Even correcting the bad user input, we still cannot recover: $ tc qdisc replace dev swp3 ingress_block 1 egress_block 2 clsact Error: dsa_core: Flow block cb is busy. Basically the only way to recover is to reboot the system, or unbind and rebind the net device driver. To fix the bug, we need to fill the correct error teardown path which was missed during code movement, and call tcf_block_offload_unbind() when xa_insert() fails. [ last note, fundamentally I blame the label naming convention in tcf_block_get_ext() for the bug. The labels should be named after what they do, not after the error path that jumps to them. This way, it is obviously wrong that two labels pointing to the same code mean something is wrong, and checking the code correctness at the goto site is also easier ] | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mctp i2c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol. | 5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow()
There are code paths from which the function is called without holding
the RCU read lock, resulting in a suspicious RCU usage warning [1].
Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire
the RCU read lock before calling
l3mdev_master_upper_ifindex_by_index_rcu().
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
|
5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
|
5.5 |
Medium |
|
17h19 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
resource,kexec: walk_system_ram_res_rev must retain resource flags
walk_system_ram_res_rev() erroneously discards resource flags when passing
the information to the callback.
This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have
these resources selected during kexec to store kexec buffers if that
memory happens to be at placed above normal system ram.
This leads to undefined behavior after reboot. If the kexec buffer is
never touched, nothing happens. If the kexec buffer is touched, it could
lead to a crash (like below) or undefined behavior.
Tested on a system with CXL memory expanders with driver managed memory,
TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags
were being discarded and as a result the check for
IORESOURCE_SYSRAM_DRIVER_MANAGED passes.
find_next_iomem_res: name(System RAM (kmem))
start(10000000000)
end(1034fffffff)
flags(83000200)
locate_mem_hole_top_down: start(10000000000) end(1034fffffff) flags(0)
[.] BUG: unable to handle page fault for address: ffff89834ffff000
[.] #PF: supervisor read access in kernel mode
[.] #PF: error_code(0x0000) - not-present page
[.] PGD c04c8bf067 P4D c04c8bf067 PUD c04c8be067 PMD 0
[.] Oops: 0000 [#1] SMP
[.] RIP: 0010:ima_restore_measurement_list+0x95/0x4b0
[.] RSP: 0018:ffffc900000d3a80 EFLAGS: 00010286
[.] RAX: 0000000000001000 RBX: 0000000000000000 RCX: ffff89834ffff000
[.] RDX: 0000000000000018 RSI: ffff89834ffff000 RDI: ffff89834ffff018
[.] RBP: ffffc900000d3ba0 R08: 0000000000000020 R09: ffff888132b8a900
[.] R10: 4000000000000000 R11: 000000003a616d69 R12: 0000000000000000
[.] R13: ffffffff8404ac28 R14: 0000000000000000 R15: ffff89834ffff000
[.] FS: 0000000000000000(0000) GS:ffff893d44640000(0000) knlGS:0000000000000000
[.] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[.] ata5: SATA link down (SStatus 0 SControl 300)
[.] CR2: ffff89834ffff000 CR3: 000001034d00f001 CR4: 0000000000770ef0
[.] PKRU: 55555554
[.] Call Trace:
[.] |
5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: HID: core: zero-initialize the report buffer Since the report buffer is used by all kinds of drivers in various ways, let's zero-initialize it during allocation to make sure that it can't be ever used to leak kernel memory via specially-crafted report. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: security/keys: fix slab-out-of-bounds in key_task_permission KASAN reports an out of bounds read: BUG: KASAN: slab-out-of-bounds in __kuid_val include/linux/uidgid.h:36 BUG: KASAN: slab-out-of-bounds in uid_eq include/linux/uidgid.h:63 [inline] BUG: KASAN: slab-out-of-bounds in key_task_permission+0x394/0x410 security/keys/permission.c:54 Read of size 4 at addr ffff88813c3ab618 by task stress-ng/4362 CPU: 2 PID: 4362 Comm: stress-ng Not tainted 5.10.0-14930-gafbffd6c3ede #15 Call Trace: __dump_stack lib/dump_stack.c:82 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:123 print_address_description.constprop.0+0x19/0x170 mm/kasan/report.c:400 __kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560 kasan_report+0x3a/0x50 mm/kasan/report.c:585 __kuid_val include/linux/uidgid.h:36 [inline] uid_eq include/linux/uidgid.h:63 [inline] key_task_permission+0x394/0x410 security/keys/permission.c:54 search_nested_keyrings+0x90e/0xe90 security/keys/keyring.c:793 This issue was also reported by syzbot. It can be reproduced by following these steps(more details [1]): 1. Obtain more than 32 inputs that have similar hashes, which ends with the pattern '0xxxxxxxe6'. 2. Reboot and add the keys obtained in step 1. The reproducer demonstrates how this issue happened: 1. In the search_nested_keyrings function, when it iterates through the slots in a node(below tag ascend_to_node), if the slot pointer is meta and node->back_pointer != NULL(it means a root), it will proceed to descend_to_node. However, there is an exception. If node is the root, and one of the slots points to a shortcut, it will be treated as a keyring. 2. Whether the ptr is keyring decided by keyring_ptr_is_keyring function. However, KEYRING_PTR_SUBTYPE is 0x2UL, the same as ASSOC_ARRAY_PTR_SUBTYPE_MASK. 3. When 32 keys with the similar hashes are added to the tree, the ROOT has keys with hashes that are not similar (e.g. slot 0) and it splits NODE A without using a shortcut. When NODE A is filled with keys that all hashes are xxe6, the keys are similar, NODE A will split with a shortcut. Finally, it forms the tree as shown below, where slot 6 points to a shortcut. NODE A +------>+---+ ROOT | | 0 | xxe6 +---+ | +---+ xxxx | 0 | shortcut : : xxe6 +---+ | +---+ xxe6 : : | | | xxe6 +---+ | +---+ | 6 |---+ : : xxe6 +---+ +---+ xxe6 : : | f | xxe6 +---+ +---+ xxe6 | f | +---+ 4. As mentioned above, If a slot(slot 6) of the root points to a shortcut, it may be mistakenly transferred to a key*, leading to a read out-of-bounds read. To fix this issue, one should jump to descend_to_node if the ptr is a shortcut, regardless of whether the node is root or not. [1] https://lore.kernel.org/linux-kernel/[email protected]/ [jarkko: tweaked the commit message a bit to have an appropriate closes tag.] | 7.1 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: regulator: rtq2208: Fix uninitialized use of regulator_config Fix rtq2208 driver uninitialized use to cause kernel error. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sctp: properly validate chunk size in sctp_sf_ootb() A size validation fix similar to that in Commit 50619dbf8db7 ("sctp: add size validation when walking chunks") is also required in sctp_sf_ootb() to address a crash reported by syzbot: BUG: KMSAN: uninit-value in sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712 sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712 sctp_do_sm+0x181/0x93d0 net/sctp/sm_sideeffect.c:1166 sctp_endpoint_bh_rcv+0xc38/0xf90 net/sctp/endpointola.c:407 sctp_inq_push+0x2ef/0x380 net/sctp/inqueue.c:88 sctp_rcv+0x3831/0x3b20 net/sctp/input.c:243 sctp4_rcv+0x42/0x50 net/sctp/protocol.c:1159 ip_protocol_deliver_rcu+0xb51/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8 | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Enqueue Tx packets in dql before dmaengine starts
Enqueue packets in dql after dma engine starts causes race condition.
Tx transfer starts once dma engine is started and may execute dql dequeue
in completion before it gets queued. It results in following kernel crash
while running iperf stress test:
kernel BUG at lib/dynamic_queue_limits.c:99!
|
4.7 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when uninstalling driver When the driver is uninstalled and the VF is disabled concurrently, a kernel crash occurs. The reason is that the two actions call function pci_disable_sriov(). The num_VFs is checked to determine whether to release the corresponding resources. During the second calling, num_VFs is not 0 and the resource release function is called. However, the corresponding resource has been released during the first invoking. Therefore, the problem occurs: [15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [15278.131557][T50670] Call trace: [15278.134686][T50670] klist_put+0x28/0x12c [15278.138682][T50670] klist_del+0x14/0x20 [15278.142592][T50670] device_del+0xbc/0x3c0 [15278.146676][T50670] pci_remove_bus_device+0x84/0x120 [15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80 [15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c [15278.162485][T50670] sriov_disable+0x50/0x11c [15278.166829][T50670] pci_disable_sriov+0x24/0x30 [15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3] [15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge] [15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230 [15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30 [15278.193848][T50670] invoke_syscall+0x50/0x11c [15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164 [15278.203837][T50670] do_el0_svc+0x34/0xcc [15278.207834][T50670] el0_svc+0x20/0x30 For details, see the following figure. rmmod hclge disable VFs ---------------------------------------------------- hclge_exit() sriov_numvfs_store() ... device_lock() pci_disable_sriov() hns3_pci_sriov_configure() pci_disable_sriov() sriov_disable() sriov_disable() if !num_VFs : if !num_VFs : return; return; sriov_del_vfs() sriov_del_vfs() ... ... klist_put() klist_put() ... ... num_VFs = 0; num_VFs = 0; device_unlock(); In this patch, when driver is removing, we get the device_lock() to protect num_VFs, just like sriov_numvfs_store(). | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/smc: do not leave a dangling sk pointer in __smc_create()
Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when
it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC:
smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0
WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563
Modules linked in:
CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563
Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7
RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246
RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50
R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8
R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0
FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: stm32: spdifrx: fix dma channel release in stm32_spdifrx_remove In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not null. So the release of the dma channel leads to the following issue: [ 4.879000] st,stm32-spdifrx 500d0000.audio-controller: dma_request_slave_channel error -19 [ 4.888975] Unable to handle kernel NULL pointer dereference at virtual address 000000000000003d [...] [ 5.096577] Call trace: [ 5.099099] dma_release_channel+0x24/0x100 [ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx] [ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx] To avoid this issue, release channel only if the pointer is valid. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: add missing buffer index check dvb_vb2_expbuf() didn't check if the given buffer index was for a valid buffer. Add this check. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix buffer overwrite when using > 32 buffers The maximum number of buffers that can be requested was increased to 64 for the video capture queue. But video capture used a must_blank array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an out-of-bounds write when using buffer indices >= 32. Create a new define MAX_VID_CAP_BUFFERS that is used to access the must_blank array and set max_num_buffers for the video capture queue. This solves a crash reported by: https://bugzilla.kernel.org/show_bug.cgi?id=219258 | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: prevent the risk of a division by zero As reported by Coverity, the logic at tpg_precalculate_line() blindly rescales the buffer even when scaled_witdh is equal to zero. If this ever happens, this will cause a division by zero. Instead, add a WARN_ON_ONCE() to trigger such cases and return without doing any precalculation. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-use-after-free in ksmbd_smb2_session_create There is a race condition between ksmbd_smb2_session_create and ksmbd_expire_session. This patch add missing sessions_table_lock while adding/deleting session from global session table. | 7 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: check outstanding simultaneous SMB operations If Client send simultaneous SMB operations to ksmbd, It exhausts too much memory through the "ksmbd_work_cache”. It will cause OOM issue. ksmbd has a credit mechanism but it can't handle this problem. This patch add the check if it exceeds max credits to prevent this problem by assuming that one smb request consumes at least one credit. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix the missing xa_store error check xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed, so check error for xa_store() to fix it. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-use-after-free in smb3_preauth_hash_rsp ksmbd_user_session_put should be called under smb3_preauth_hash_rsp(). It will avoid freeing session before calling smb3_preauth_hash_rsp(). | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read() Avoid a possible buffer overflow if size is larger than 4K. (cherry picked from commit f5d873f5825b40d886d03bd2aede91d4cf002434) | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation When sealing or unsealing a key blob we currently do not wait for the AEAD cipher operation to finish and simply return after submitting the request. If there is some load on the system we can exit before the cipher operation is done and the buffer we read from/write to is already removed from the stack. This will e.g. result in NULL pointer dereference errors in the DCP driver during blob creation. Fix this by waiting for the AEAD cipher operation to finish before resuming the seal and unseal calls. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dm cache: fix out-of-bounds access to the dirty bitset when resizing dm-cache checks the dirty bits of the cache blocks to be dropped when shrinking the fast device, but an index bug in bitset iteration causes out-of-bounds access. Reproduce steps: 1. create a cache device of 1024 cache blocks (128 bytes dirty bitset) dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. shrink the fast device to 512 cache blocks, triggering out-of-bounds access to the dirty bitset (offset 0x80) dmsetup suspend cache dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0 Read of size 8 at addr ffffc900000f3080 by task dmsetup/131 (...snip...) The buggy address belongs to the virtual mapping at [ffffc900000f3000, ffffc900000f5000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by making the index post-incremented. | 7.1 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dm cache: fix potential out-of-bounds access on the first resume Out-of-bounds access occurs if the fast device is expanded unexpectedly before the first-time resume of the cache table. This happens because expanding the fast device requires reloading the cache table for cache_create to allocate new in-core data structures that fit the new size, and the check in cache_preresume is not performed during the first resume, leading to the issue. Reproduce steps: 1. prepare component devices: dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct 2. load a cache table of 512 cache blocks, and deliberately expand the fast device before resuming the cache, making the in-core data structures inadequate. dmsetup create cache --notable dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache 3. suspend the cache to write out the in-core dirty bitset and hint array, leading to out-of-bounds access to the dirty bitset at offset 0x40: dmsetup suspend cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80 Read of size 8 at addr ffffc90000085040 by task dmsetup/90 (...snip...) The buggy address belongs to the virtual mapping at [ffffc90000085000, ffffc90000087000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by checking the size change on the first resume. | 7.1 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dm: fix a crash if blk_alloc_disk fails If blk_alloc_disk fails, the variable md->disk is set to an error value. cleanup_mapped_device will see that md->disk is non-NULL and it will attempt to access it, causing a crash on this statement "md->disk->private_data = NULL;". | 4.7 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: vertexcom: mse102x: Fix possible double free of TX skb The scope of the TX skb is wider than just mse102x_tx_frame_spi(), so in case the TX skb room needs to be expanded, we should free the the temporary skb instead of the original skb. Otherwise the original TX skb pointer would be freed again in mse102x_tx_work(), which leads to crashes: Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23 Hardware name: chargebyte Charge SOM DC-ONE (DT) Workqueue: events mse102x_tx_work [mse102x] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_release_data+0xb8/0x1d8 lr : skb_release_data+0x1ac/0x1d8 sp : ffff8000819a3cc0 x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0 x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50 x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000 x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8 x8 : fffffc00001bc008 x7 : 0000000000000000 x6 : 0000000000000008 x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009 x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000 Call trace: skb_release_data+0xb8/0x1d8 kfree_skb_reason+0x48/0xb0 mse102x_tx_work+0x164/0x35c [mse102x] process_one_work+0x138/0x260 worker_thread+0x32c/0x438 kthread+0x118/0x11c ret_from_fork+0x10/0x20 Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660) | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64/sve: Discard stale CPU state when handling SVE traps The logic for handling SVE traps manipulates saved FPSIMD/SVE state incorrectly, and a race with preemption can result in a task having TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SVE traps enabled). This has been observed to result in warnings from do_sve_acc() where SVE traps are not expected while TIF_SVE is set: | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ Warnings of this form have been reported intermittently, e.g. https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/ https://lore.kernel.org/linux-arm-kernel/[email protected]/ The race can occur when the SVE trap handler is preempted before and after manipulating the saved FPSIMD/SVE state, starting and ending on the same CPU, e.g. | void do_sve_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ | | sve_init_regs() { | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | ... | } else { | fpsimd_to_sve(current); | current->thread.fp_type = FP_STATE_SVE; | } | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SVE traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. | 7 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: idpf: avoid vport access in idpf_get_link_ksettings When the device control plane is removed or the platform running device control plane is rebooted, a reset is detected on the driver. On driver reset, it releases the resources and waits for the reset to complete. If the reset fails, it takes the error path and releases the vport lock. At this time if the monitoring tools tries to access link settings, it call traces for accessing released vport pointer. To avoid it, move link_speed_mbps to netdev_priv structure which removes the dependency on vport pointer and the vport lock in idpf_get_link_ksettings. Also use netif_carrier_ok() to check the link status and adjust the offsetof to use link_up instead of link_speed_mbps. | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: reinitialize delayed ref list after deleting it from the list At insert_delayed_ref() if we need to update the action of an existing ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's ref_add_list using list_del(), which leaves the ref's add_list member not reinitialized, as list_del() sets the next and prev members of the list to LIST_POISON1 and LIST_POISON2, respectively. If later we end up calling drop_delayed_ref() against the ref, which can happen during merging or when destroying delayed refs due to a transaction abort, we can trigger a crash since at drop_delayed_ref() we call list_empty() against the ref's add_list, which returns false since the list was not reinitialized after the list_del() and as a consequence we call list_del() again at drop_delayed_ref(). This results in an invalid list access since the next and prev members are set to poison pointers, resulting in a splat if CONFIG_LIST_HARDENED and CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences otherwise. So fix this by deleting from the list with list_del_init() instead. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: filemap: Fix bounds checking in filemap_read() If the caller supplies an iocb->ki_pos value that is close to the filesystem upper limit, and an iterator with a count that causes us to overflow that limit, then filemap_read() enters an infinite loop. This behaviour was discovered when testing xfstests generic/525 with the "localio" optimisation for loopback NFS mounts. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: signal: restore the override_rlimit logic Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of signals. However now it's enforced unconditionally, even if override_rlimit is set. This behavior change caused production issues. For example, if the limit is reached and a process receives a SIGSEGV signal, sigqueue_alloc fails to allocate the necessary resources for the signal delivery, preventing the signal from being delivered with siginfo. This prevents the process from correctly identifying the fault address and handling the error. From the user-space perspective, applications are unaware that the limit has been reached and that the siginfo is effectively 'corrupted'. This can lead to unpredictable behavior and crashes, as we observed with java applications. Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip the comparison to max there if override_rlimit is set. This effectively restores the old behavior. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid overflow in damon_feed_loop_next_input() damon_feed_loop_next_input() is inefficient and fragile to overflows. Specifically, 'score_goal_diff_bp' calculation can overflow when 'score' is high. The calculation is actually unnecessary at all because 'goal' is a constant of value 10,000. Calculation of 'compensation' is again fragile to overflow. Final calculation of return value for under-achiving case is again fragile to overflow when the current score is under-achieving the target. Add two corner cases handling at the beginning of the function to make the body easier to read, and rewrite the body of the function to avoid overflows and the unnecessary bp value calcuation. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: musb: sunxi: Fix accessing an released usb phy Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") will cause that usb phy @glue->xceiv is accessed after released. 1) register platform driver @sunxi_musb_driver // get the usb phy @glue->xceiv sunxi_musb_probe() -> devm_usb_get_phy(). 2) register and unregister platform driver @musb_driver musb_probe() -> sunxi_musb_init() use the phy here //the phy is released here musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy() 3) register @musb_driver again musb_probe() -> sunxi_musb_init() use the phy here but the phy has been released at 2). ... Fixed by reverting the commit, namely, removing devm_usb_put_phy() from sunxi_musb_exit(). | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd() The "*cmd" variable can be controlled by the user via debugfs. That means "new_cam" can be as high as 255 while the size of the uc->updated[] array is UCSI_MAX_ALTMODES (30). The call tree is: ucsi_cmd() // val comes from simple_attr_write_xsigned() -> ucsi_send_command() -> ucsi_send_command_common() -> ucsi_run_command() // calls ucsi->ops->sync_control() -> ucsi_ccg_sync_control() | 7.1 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_edgeport: fix use after free in debug printk The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb) is a use after free of the "urb" pointer. Store the "dev" pointer at the start of the function to avoid this issue. | 7.8 |
High |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs A recent change in the venus driver results in a stuck clock on the Lenovo ThinkPad X13s, for example, when streaming video in firefox: video_cc_mvs0_clk status stuck at 'off' WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c ... Call trace: clk_branch_wait+0x144/0x15c clk_branch2_enable+0x30/0x40 clk_core_enable+0xd8/0x29c clk_enable+0x2c/0x4c vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core] coreid_power_v4+0x464/0x628 [venus_core] vdec_start_streaming+0xc4/0x510 [venus_dec] vb2_start_streaming+0x6c/0x180 [videobuf2_common] vb2_core_streamon+0x120/0x1dc [videobuf2_common] vb2_streamon+0x1c/0x6c [videobuf2_v4l2] v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem] v4l_streamon+0x24/0x30 [videodev] using the out-of-tree sm8350/sc8280xp venus support. [1] Update also the sm8350/sc8280xp GDSC definitions so that the hw control mode can be changed at runtime as the venus driver now requires. | 5.5 |
Medium |
|
01h30 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
Syzkaller is able to provoke null-ptr-dereference in ocfs2_xa_remove():
[ 57.319872] (a.out,1161,7):ocfs2_xa_remove:2028 ERROR: status = -12
[ 57.320420] (a.out,1161,7):ocfs2_xa_cleanup_value_truncate:1999 ERROR: Partial truncate while removing xattr overlay.upper. Leaking 1 clusters and removing the entry
[ 57.321727] BUG: kernel NULL pointer dereference, address: 0000000000000004
[...]
[ 57.325727] RIP: 0010:ocfs2_xa_block_wipe_namevalue+0x2a/0xc0
[...]
[ 57.331328] Call Trace:
[ 57.331477] |
5.5 |
Medium |
|
01h29 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans During loopback communication, a dangling pointer can be created in vsk->trans, potentially leading to a Use-After-Free condition. This issue is resolved by initializing vsk->trans to NULL. | 7.8 |
High |
|
13h58 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fork: only invoke khugepaged, ksm hooks if no error There is no reason to invoke these hooks early against an mm that is in an incomplete state. The change in commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") makes this more pertinent as we may be in a state where entries in the maple tree are not yet consistent. Their placement early in dup_mmap() only appears to have been meaningful for early error checking, and since functionally it'd require a very small allocation to fail (in practice 'too small to fail') that'd only occur in the most dire circumstances, meaning the fork would fail or be OOM'd in any case. Since both khugepaged and KSM tracking are there to provide optimisations to memory performance rather than critical functionality, it doesn't really matter all that much if, under such dire memory pressure, we fail to register an mm with these. As a result, we follow the example of commit d2081b2bf819 ("mm: khugepaged: make khugepaged_enter() void function") and make ksm_fork() a void function also. We only expose the mm to these functions once we are done with them and only if no error occurred in the fork operation. | 5.5 |
Medium |
|
10h17 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds write in trie_get_next_key() trie_get_next_key() allocates a node stack with size trie->max_prefixlen, while it writes (trie->max_prefixlen + 1) nodes to the stack when it has full paths from the root to leaves. For example, consider a trie with max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ... 0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with .prefixlen = 8 make 9 nodes be written on the node stack with size 8. | 7.8 |
High |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
macsec: Fix use-after-free while sending the offloading packet
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
|
7.8 |
High |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
The following race condition could trigger a NULL pointer dereference:
sock_map_link_detach(): sock_map_link_update_prog():
mutex_lock(&sockmap_mutex);
...
sockmap_link->map = NULL;
mutex_unlock(&sockmap_mutex);
mutex_lock(&sockmap_mutex);
...
sock_map_prog_link_lookup(sockmap_link->map);
mutex_unlock(&sockmap_mutex);
|
4.7 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netdevsim: Add trailing zero to terminate the string in nsim_nexthop_bucket_activity_write() This was found by a static analyzer. We should not forget the trailing zero after copy_from_user() if we will further do some string operations, sscanf() in this case. Adding a trailing zero will ensure that the function performs properly. | 5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: fix crash when config small gso_max_size/gso_ipv4_max_size Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow in sk_dst_gso_max_size(), which may trigger a BUG_ON crash, because sk->sk_gso_max_size would be much bigger than device limits. Call Trace: tcp_write_xmit tso_segs = tcp_init_tso_segs(skb, mss_now); tcp_set_skb_tso_segs tcp_skb_pcount_set // skb->len = 524288, mss_now = 8 // u16 tso_segs = 524288/8 = 65535 -> 0 tso_segs = DIV_ROUND_UP(skb->len, mss_now) BUG_ON(!tso_segs) Add check for the minimum value of gso_max_size and gso_ipv4_max_size. | 5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: Fix use-after-free in get_info()
ip6table_nat module unload has refcnt warning for UAF. call trace is:
WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80
Modules linked in: ip6table_nat(-)
CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:module_put+0x6f/0x80
Call Trace:
|
7.8 |
High |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
I got a syzbot report without a repro [1] crashing in nf_send_reset6()
I think the issue is that dev->hard_header_len is zero, and we attempt
later to push an Ethernet header.
Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c.
[1]
skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900045269b0 EFLAGS: 00010282
RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800
RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000
RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc
R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140
R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c
FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci7 hci_power_on
RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138
Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78
RSP: 0018:ffff888120bafac8 EFLAGS: 00010212
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040
RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4
RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054
R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000
FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the bits are dynamically allocated. However, the check is incorrect and may cause a kmemleak as shown below: unreferenced object 0xffff88812628c8c0 (size 32): comm "swapper/0", pid 1, jiffies 4294727320 hex dump (first 32 bytes): b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U........... f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 .............. backtrace (crc 781e32cc): [<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80 [<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0 [<00000000597124d6>] __alloc.isra.0+0x89/0xb0 [<000000004ebfffcd>] alloc_bulk+0x2af/0x720 [<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0 [<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610 [<000000008b616eac>] bpf_global_ma_init+0x19/0x30 [<00000000fc473efc>] do_one_initcall+0xd3/0x3c0 [<00000000ec81498c>] kernel_init_freeable+0x66a/0x940 [<00000000b119f72f>] kernel_init+0x20/0x160 [<00000000f11ac9a7>] ret_from_fork+0x3c/0x70 [<0000000004671da4>] ret_from_fork_asm+0x1a/0x30 That is because nr_bits will be set as zero in bpf_iter_bits_next() after all bits have been iterated. Fix the issue by setting kit->bit to kit->nr_bits instead of setting kit->nr_bits to zero when the iteration completes in bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to check whether the iteration is complete and still use "nr_bits > 64" to indicate whether bits are dynamically allocated. The "!nr_bits" check is necessary because bpf_iter_bits_new() may fail before setting kit->nr_bits, and this condition will stop the iteration early instead of accessing the zeroed or freed kit->bits. Considering the initial value of kit->bits is -1 and the type of kit->nr_bits is unsigned int, change the type of kit->nr_bits to int. The potential overflow problem will be handled in the following patch. | 5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Check the validity of nr_words in bpf_iter_bits_new() Check the validity of nr_words in bpf_iter_bits_new(). Without this check, when multiplication overflow occurs for nr_bits (e.g., when nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008). Fix it by limiting the maximum value of nr_words to 511. The value is derived from the current implementation of BPF memory allocator. To ensure compatibility if the BPF memory allocator's size limitation changes in the future, use the helper bpf_mem_alloc_check_size() to check whether nr_bytes is too larger. And return -E2BIG instead of -ENOMEM for oversized nr_bytes. | 5.5 |
Medium |
|
10h15 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
[2]
WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0
Modules linked in:
CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0
[...]
Call Trace:
|
5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed. | 6.2 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fsdax: dax_unshare_iter needs to copy entire blocks The code that copies data from srcmap to iomap in dax_unshare_iter is very very broken, which bfoster's recent fsx changes have exposed. If the pos and len passed to dax_file_unshare are not aligned to an fsblock boundary, the iter pos and length in the _iter function will reflect this unalignment. dax_iomap_direct_access always returns a pointer to the start of the kmapped fsdax page, even if its pos argument is in the middle of that page. This is catastrophic for data integrity when iter->pos is not aligned to a page, because daddr/saddr do not point to the same byte in the file as iter->pos. Hence we corrupt user data by copying it to the wrong place. If iter->pos + iomap_length() in the _iter function not aligned to a page, then we fail to copy a full block, and only partially populate the destination block. This is catastrophic for data confidentiality because we expose stale pmem contents. Fix both of these issues by aligning copy_pos/copy_len to a page boundary (remember, this is fsdax so 1 fsblock == 1 base page) so that we always copy full blocks. We're not done yet -- there's no call to invalidate_inode_pages2_range, so programs that have the file range mmap'd will continue accessing the old memory mapping after the file metadata updates have completed. Be careful with the return value -- if the unshare succeeds, we still need to return the number of bytes that the iomap iter thinks we're operating on. | 7.1 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ntfs3: Add bounds checking to mi_enum_attr() Added bounds checking to make sure that every attr don't stray beyond valid memory region. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Check if more than chunk-size bytes are written A incorrectly formatted chunk may decompress into more than LZNT_CHUNK_SIZE bytes and a index out of bounds will occur in s_max_off. | 7.1 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add rough attr alloc_size check | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix possible deadlock in mi_read Mutex lock with another subclass used in ni_lock_dir(). | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Additional check in ni_clear() Checking of NTFS_FLAGS_LOG_REPLAYING added to prevent access to uninitialized bitmap during replay process. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix general protection fault in run_is_mapped_full Fixed deleating of a non-resident attribute in ntfs_create_inode() rollback. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Additional check in ntfs_file_release | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSD: Initialize struct nfsd4_copy earlier Ensure the refcount and async_copies fields are initialized early. cleanup_async_copy() will reference these fields if an error occurs in nfsd4_copy(). If they are not correctly initialized, at the very least, a refcount underflow occurs. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with this driver. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower Avoid potentially crashing in the driver because of uninitialized private data | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: Fix memory leak in management tx
In the current logic, memory is allocated for storing the MSDU context
during management packet TX but this memory is not being freed during
management TX completion. Similar leaks are seen in the management TX
cleanup logic.
Kmemleak reports this problem as below,
unreferenced object 0xffffff80b64ed250 (size 16):
comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s)
hex dump (first 16 bytes):
00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t......
backtrace:
[ |
5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: clear wdev->cqm_config pointer on free When we free wdev->cqm_config when unregistering, we also need to clear out the pointer since the same wdev/netdev may get re-registered in another network namespace, then destroyed later, running this code again, which results in a double-free. | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: Clear stale interrupts before resuming device iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 0 ---truncated--- | 7 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr() In the ad7124_write_raw() function, parameter val can potentially be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST() is called within ad7124_set_channel_odr(). The ad7124_write_raw() function is invoked through the sequence: iio_write_channel_raw() -> iio_write_channel_attribute() -> iio_channel_write(), with no checks in place to ensure val is non-zero. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table() modprobe iio-test-gts and rmmod it, then the following memory leak occurs: unreferenced object 0xffffff80c810be00 (size 64): comm "kunit_try_catch", pid 1654, jiffies 4294913981 hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 20 00 00 00 40 00 00 00 ........ ...@... 80 00 00 00 00 02 00 00 00 04 00 00 00 08 00 00 ................ backtrace (crc a63d875e): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000000315bc18>] 0xffffffdf052a6488 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cbfe9e70 (size 16): comm "kunit_try_catch", pid 1658, jiffies 4294914015 hex dump (first 16 bytes): 10 00 00 00 40 00 00 00 80 00 00 00 00 00 00 00 ....@........... backtrace (crc 857f0cb4): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000007d089d45>] 0xffffffdf052a6864 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 ...... It includes 5*5 times "size 64" memory leaks, which correspond to 5 times test_init_iio_gain_scale() calls with gts_test_gains size 10 (10*size(int)) and gts_test_itimes size 5. It also includes 5*1 times "size 16" memory leak, which correspond to one time __test_init_iio_gain_scale() call with gts_test_gains_gain_low size 3 (3*size(int)) and gts_test_itimes size 5. The reason is that the per_time_gains[i] is not freed which is allocated in the "gts->num_itime" for loop in iio_gts_build_avail_scale_table(). | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of checked flag Syzbot reported that in directory operations after nilfs2 detects filesystem corruption and degrades to read-only, __block_write_begin_int(), which is called to prepare block writes, may fail the BUG_ON check for accesses exceeding the folio/page size, triggering a kernel bug. This was found to be because the "checked" flag of a page/folio was not cleared when it was discarded by nilfs2's own routine, which causes the sanity check of directory entries to be skipped when the directory page/folio is reloaded. So, fix that. This was necessary when the use of nilfs2's own page discard routine was applied to more than just metadata files. | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential deadlock with newly created symlinks Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers memory reclamation involving the filesystem layer, which can result in circular lock dependencies among the reader/writer semaphore nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the fs_reclaim pseudo lock. This is because after commit 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem"), the gfp flags of the page cache for symbolic links are overwritten to GFP_KERNEL via inode_nohighmem(). This is not a problem for symlinks read from the backing device, because the __GFP_FS flag is dropped after inode_nohighmem() is called. However, when a new symlink is created with nilfs_symlink(), the gfp flags remain overwritten to GFP_KERNEL. Then, memory allocation called from page_symlink() etc. triggers memory reclamation including the FS layer, which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can cause a deadlock if they are called while nilfs->ns_segctor_sem is held: Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags of newly created symlinks in the same way that nilfs_new_inode() and __nilfs_read_inode() do, as a workaround until we adopt nofs allocation scope consistently or improve the locking constraints. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
KASAN reported following issue:
BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt]
Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387
Tainted: [U]=USER
Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
Call Trace:
|
7.1 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
|
7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix error propagation of split bios
The purpose of btrfs_bbio_propagate_error() shall be propagating an error
of split bio to its original btrfs_bio, and tell the error to the upper
layer. However, it's not working well on some cases.
* Case 1. Immediate (or quick) end_bio with an error
When btrfs sends btrfs_bio to mirrored devices, btrfs calls
btrfs_bio_end_io() when all the mirroring bios are completed. If that
btrfs_bio was split, it is from btrfs_clone_bioset and its end_io function
is btrfs_orig_write_end_io. For this case, btrfs_bbio_propagate_error()
accesses the orig_bbio's bio context to increase the error count.
That works well in most cases. However, if the end_io is called enough
fast, orig_bbio's (remaining part after split) bio context may not be
properly set at that time. Since the bio context is set when the orig_bbio
(the last btrfs_bio) is sent to devices, that might be too late for earlier
split btrfs_bio's completion. That will result in NULL pointer
dereference.
That bug is easily reproducible by running btrfs/146 on zoned devices [1]
and it shows the following trace.
[1] You need raid-stripe-tree feature as it create "-d raid0 -m raid1" FS.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 UID: 0 PID: 13 Comm: kworker/u32:1 Not tainted 6.11.0-rc7-BTRFS-ZNS+ #474
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: writeback wb_workfn (flush-btrfs-5)
RIP: 0010:btrfs_bio_end_io+0xae/0xc0 [btrfs]
BTRFS error (device dm-0): bdev /dev/mapper/error-test errs: wr 2, rd 0, flush 0, corrupt 0, gen 0
RSP: 0018:ffffc9000006f248 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888005a7f080 RCX: ffffc9000006f1dc
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff888005a7f080
RBP: ffff888011dfc540 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff82e508e0 R11: 0000000000000005 R12: ffff88800ddfbe58
R13: ffff888005a7f080 R14: ffff888005a7f158 R15: ffff888005a7f158
FS: 0000000000000000(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000002e22006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334 | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sched/numa: Fix the potential null pointer dereference in task_numa_work() When running stress-ng-vm-segv test, we found a null pointer dereference error in task_numa_work(). Here is the backtrace: [323676.066985] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ...... [323676.067108] CPU: 35 PID: 2694524 Comm: stress-ng-vm-se ...... [323676.067113] pstate: 23401009 (nzCv daif +PAN -UAO +TCO +DIT +SSBS BTYPE=--) [323676.067115] pc : vma_migratable+0x1c/0xd0 [323676.067122] lr : task_numa_work+0x1ec/0x4e0 [323676.067127] sp : ffff8000ada73d20 [323676.067128] x29: ffff8000ada73d20 x28: 0000000000000000 x27: 000000003e89f010 [323676.067130] x26: 0000000000080000 x25: ffff800081b5c0d8 x24: ffff800081b27000 [323676.067133] x23: 0000000000010000 x22: 0000000104d18cc0 x21: ffff0009f7158000 [323676.067135] x20: 0000000000000000 x19: 0000000000000000 x18: ffff8000ada73db8 [323676.067138] x17: 0001400000000000 x16: ffff800080df40b0 x15: 0000000000000035 [323676.067140] x14: ffff8000ada73cc8 x13: 1fffe0017cc72001 x12: ffff8000ada73cc8 [323676.067142] x11: ffff80008001160c x10: ffff000be639000c x9 : ffff8000800f4ba4 [323676.067145] x8 : ffff000810375000 x7 : ffff8000ada73974 x6 : 0000000000000001 [323676.067147] x5 : 0068000b33e26707 x4 : 0000000000000001 x3 : ffff0009f7158000 [323676.067149] x2 : 0000000000000041 x1 : 0000000000004400 x0 : 0000000000000000 [323676.067152] Call trace: [323676.067153] vma_migratable+0x1c/0xd0 [323676.067155] task_numa_work+0x1ec/0x4e0 [323676.067157] task_work_run+0x78/0xd8 [323676.067161] do_notify_resume+0x1ec/0x290 [323676.067163] el0_svc+0x150/0x160 [323676.067167] el0t_64_sync_handler+0xf8/0x128 [323676.067170] el0t_64_sync+0x17c/0x180 [323676.067173] Code: d2888001 910003fd f9000bf3 aa0003f3 (f9401000) [323676.067177] SMP: stopping secondary CPUs [323676.070184] Starting crashdump kernel... stress-ng-vm-segv in stress-ng is used to stress test the SIGSEGV error handling function of the system, which tries to cause a SIGSEGV error on return from unmapping the whole address space of the child process. Normally this program will not cause kernel crashes. But before the munmap system call returns to user mode, a potential task_numa_work() for numa balancing could be added and executed. In this scenario, since the child process has no vma after munmap, the vma_next() in task_numa_work() will return a null pointer even if the vma iterator restarts from 0. Recheck the vma pointer before dereferencing it in task_numa_work(). | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem, on huge=always tmpfs, issues a warning and then hangs (interruptibly): WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9 CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2 ... copy_page_from_iter_atomic+0xa6/0x5ec generic_perform_write+0xf6/0x1b4 shmem_file_write_iter+0x54/0x67 Fix copy_page_from_iter_atomic() by limiting it in that case (include/linux/skbuff.h skb_frag_must_loop() does similar). But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too surprising, has outlived its usefulness, and should just be removed? | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Vangogh: Fix kernel memory out of bounds write
KASAN reports that the GPU metrics table allocated in
vangogh_tables_init() is not large enough for the memset done in
smu_cmn_init_soft_gpu_metrics(). Condensed report follows:
[ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu]
[ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067
...
[ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544
[ 33.861816] Tainted: [W]=WARN
[ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023
[ 33.861822] Call Trace:
[ 33.861826] |
7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids() Mounting btrfs from two images (which have the same one fsid and two different dev_uuids) in certain executing order may trigger an UAF for variable 'device->bdev_file' in __btrfs_free_extra_devids(). And following are the details: 1. Attach image_1 to loop0, attach image_2 to loop1, and scan btrfs devices by ioctl(BTRFS_IOC_SCAN_DEV): / btrfs_device_1 → loop0 fs_device \ btrfs_device_2 → loop1 2. mount /dev/loop0 /mnt btrfs_open_devices btrfs_device_1->bdev_file = btrfs_get_bdev_and_sb(loop0) btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree fail: btrfs_close_devices // -ENOMEM btrfs_close_bdev(btrfs_device_1) fput(btrfs_device_1->bdev_file) // btrfs_device_1->bdev_file is freed btrfs_close_bdev(btrfs_device_2) fput(btrfs_device_2->bdev_file) 3. mount /dev/loop1 /mnt btrfs_open_devices btrfs_get_bdev_and_sb(&bdev_file) // EIO, btrfs_device_1->bdev_file is not assigned, // which points to a freed memory area btrfs_device_2->bdev_file = btrfs_get_bdev_and_sb(loop1) btrfs_fill_super open_ctree btrfs_free_extra_devids if (btrfs_device_1->bdev_file) fput(btrfs_device_1->bdev_file) // UAF ! Fix it by setting 'device->bdev_file' as 'NULL' after closing the btrfs_device in btrfs_close_one_device(). | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: assign dh_key to NULL after kfree_sensitive ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup() for the same controller. So it's better to nullify it after release on error path in order to avoid double free later in nvmet_destroy_auth(). Found by Linux Verification Center (linuxtesting.org) with Svace. | 7.8 |
High |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic() modprobe drm_connector_test and then rmmod drm_connector_test, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80cb0ee400 (size 128): comm "kunit_try_catch", pid 1948, jiffies 4294950339 hex dump (first 32 bytes): 14 44 02 00 80 07 d8 07 04 08 98 08 00 00 38 04 .D............8. 3c 04 41 04 65 04 00 00 05 00 00 00 00 00 00 00 <.A.e........... backtrace (crc 90e9585c): [<00000000ec42e3d7>] kmemleak_alloc+0x34/0x40 [<00000000d0ef055a>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000c2062161>] drm_mode_duplicate+0x44/0x19c [<00000000f96c74aa>] drm_display_mode_from_cea_vic+0x88/0x98 [<00000000d8f2c8b4>] 0xffffffdc982a4868 [<000000005d164dbc>] kunit_try_run_case+0x13c/0x3ac [<000000006fb23398>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000006ea56ca0>] kthread+0x2e8/0x374 [<000000000676063f>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. | 5.5 |
Medium |
|
10h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic() modprobe drm_hdmi_state_helper_test and then rmmod it, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80ccd18100 (size 128): comm "kunit_try_catch", pid 1851, jiffies 4295059695 hex dump (first 32 bytes): 57 62 00 00 80 02 90 02 f0 02 20 03 00 00 e0 01 Wb........ ..... ea 01 ec 01 0d 02 00 00 0a 00 00 00 00 00 00 00 ................ backtrace (crc c2f1aa95): [<000000000f10b11b>] kmemleak_alloc+0x34/0x40 [<000000001cd4cf73>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000f1f3cffa>] drm_mode_duplicate+0x44/0x19c [<000000008cbeef13>] drm_display_mode_from_cea_vic+0x88/0x98 [<0000000019daaacf>] 0xffffffedc11ae69c [<000000000aad0f85>] kunit_try_run_case+0x13c/0x3ac [<00000000a9210bac>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000000a0b2e9e>] kthread+0x2e8/0x374 [<00000000bd668858>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. | 5.5 |
Medium |
|
06h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: udf: refactor inode_bmap() to handle error Refactor inode_bmap() to handle error since udf_next_aext() can return error now. On situations like ftruncate, udf_extend_file() can now detect errors and bail out early without resorting to checking for particular offsets and assuming internal behavior of these functions. | 3.3 |
Low |
|
06h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add a check for memory allocation __alloc_pbl() can return error when memory allocation fails. Driver is not checking the status on one of the instances. | 7.8 |
High |
|
06h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages Avoid memory corruption while setting up Level-2 PBL pages for the non MR resources when num_pages > 256K. There will be a single PDE page address (contiguous pages in the case of > PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid memory access after 256K PBL entries in the PDE. | 5.5 |
Medium |
|
06h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix reader locking when changing the sub buffer order The function ring_buffer_subbuf_order_set() updates each ring_buffer_per_cpu and installs new sub buffers that match the requested page order. This operation may be invoked concurrently with readers that rely on some of the modified data, such as the head bit (RB_PAGE_HEAD), or the ring_buffer_per_cpu.pages and reader_page pointers. However, no exclusive access is acquired by ring_buffer_subbuf_order_set(). Modifying the mentioned data while a reader also operates on them can then result in incorrect memory access and various crashes. Fix the problem by taking the reader_lock when updating a specific ring_buffer_per_cpu in ring_buffer_subbuf_order_set(). | 5.5 |
Medium |
|
06h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must only touch as many descriptors, otherwise it ends up corrupting unrelated memory. Fix the loop iteration count accordingly. | 5.5 |
Medium |
|
06h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size() The step variable is initialized to zero. It is changed in the loop, but if it's not changed it will remain zero. Add a variable check before the division. The observed behavior was introduced by commit 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"), and it is difficult to show that any of the interval parameters will satisfy the snd_interval_test() condition with data from the amdtp_rate_table[] table. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 5.5 |
Medium |
|
06h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fs: don't try and remove empty rbtree node When copying a namespace we won't have added the new copy into the namespace rbtree until after the copy succeeded. Calling free_mnt_ns() will try to remove the copy from the rbtree which is invalid. Simply free the namespace skeleton directly. | 5.5 |
Medium |
|
06h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix address emission with tag-based KASAN enabled When BPF_TRAMP_F_CALL_ORIG is enabled, the address of a bpf_tramp_image struct on the stack is passed during the size calculation pass and an address on the heap is passed during code generation. This may cause a heap buffer overflow if the heap address is tagged because emit_a64_mov_i64() will emit longer code than it did during the size calculation pass. The same problem could occur without tag-based KASAN if one of the 16-bit words of the stack address happened to be all-ones during the size calculation pass. Fix the problem by assuming the worst case (4 instructions) when calculating the size of the bpf_tramp_image address emission. | 7.8 |
High |
|
05h56 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: propagate directory read errors from nilfs_find_entry() Syzbot reported that a task hang occurs in vcs_open() during a fuzzing test for nilfs2. The root cause of this problem is that in nilfs_find_entry(), which searches for directory entries, ignores errors when loading a directory page/folio via nilfs_get_folio() fails. If the filesystem images is corrupted, and the i_size of the directory inode is large, and the directory page/folio is successfully read but fails the sanity check, for example when it is zero-filled, nilfs_check_folio() may continue to spit out error messages in bursts. Fix this issue by propagating the error to the callers when loading a page/folio fails in nilfs_find_entry(). The current interface of nilfs_find_entry() and its callers is outdated and cannot propagate error codes such as -EIO and -ENOMEM returned via nilfs_find_entry(), so fix it together. | 5.5 |
Medium |
|
05h56 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Fix encoder->possible_clones Include the encoder itself in its possible_clones bitmask. In the past nothing validated that drivers were populating possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones"). Looks like radeon never got the memo and is still not following the rules 100% correctly. This results in some warnings during driver initialization: Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7) WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c ... (cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db) | 5.5 |
Medium |
|
05h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iio: light: veml6030: fix IIO device retrieval from embedded device The dev pointer that is received as an argument in the in_illuminance_period_available_show function references the device embedded in the IIO device, not in the i2c client. dev_to_iio_dev() must be used to accessthe right data. The current implementation leads to a segmentation fault on every attempt to read the attribute because indio_dev gets a NULL assignment. This bug has been present since the first appearance of the driver, apparently since the last version (V6) before getting applied. A constant attribute was used until then, and the last modifications might have not been tested again. | 5.5 |
Medium |
|
05h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pinctrl: intel: platform: fix error path in device_for_each_child_node() The device_for_each_child_node() loop requires calls to fwnode_handle_put() upon early returns to decrement the refcount of the child node and avoid leaking memory if that error path is triggered. There is one early returns within that loop in intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is missing. Instead of adding the missing call, the scoped version of the loop can be used to simplify the code and avoid mistakes in the future if new early returns are added, as the child node is only used for parsing, and it is never assigned. | 5.5 |
Medium |
|
05h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pinctrl: ocelot: fix system hang on level based interrupts The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, ®); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ``` | 5.5 |
Medium |
|
05h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: posix-clock: Fix missing timespec64 check in pc_clock_settime() As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself. | 5.5 |
Medium |
|
05h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
arm64: probes: Fix uprobes for big-endian kernels
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include |
5.5 |
Medium |
|
05h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/entry_32: Clear CPU buffers after register restore in NMI return CPU buffers are currently cleared after call to exc_nmi, but before register state is restored. This may be okay for MDS mitigation but not for RDFS. Because RDFS mitigation requires CPU buffers to be cleared when registers don't have any sensitive data. Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI. | 7.1 |
High |
|
05h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't allow a VMOVP on a dying VPE Kunkun Jiang reported that there is a small window of opportunity for userspace to force a change of affinity for a VPE while the VPE has already been unmapped, but the corresponding doorbell interrupt still visible in /proc/irq/. Plug the race by checking the value of vmapp_count, which tracks whether the VPE is mapped ot not, and returning an error in this case. This involves making vmapp_count common to both GICv4.1 and its v4.0 ancestor. | 4.7 |
Medium |
|
05h43 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: don't set SB_RDONLY after filesystem errors When the filesystem is mounted with errors=remount-ro, we were setting SB_RDONLY flag to stop all filesystem modifications. We knew this misses proper locking (sb->s_umount) and does not go through proper filesystem remount procedure but it has been the way this worked since early ext2 days and it was good enough for catastrophic situation damage mitigation. Recently, syzbot has found a way (see link) to trigger warnings in filesystem freezing because the code got confused by SB_RDONLY changing under its hands. Since these days we set EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all filesystem modifications, modifying SB_RDONLY shouldn't be needed. So stop doing that. | 5.5 |
Medium |
|
05h43 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ice: fix memleak in ice_init_tx_topology()
Fix leak of the FW blob (DDP pkg).
Make ice_cfg_tx_topo() const-correct, so ice_init_tx_topology() can avoid
copying whole FW blob. Copy just the topology section, and only when
needed. Reuse the buffer allocated for the read of the current topology.
This was found by kmemleak, with the following trace for each PF:
[ |
5.5 |
Medium |
|
05h43 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Switch to device-managed dmam_alloc_coherent() Using the device-managed version allows to simplify clean-up in probe() error path. Additionally, this device-managed ensures proper cleanup, which helps to resolve memory errors, page faults, btrfs going read-only, and btrfs disk corruption. | 5.5 |
Medium |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83869: fix memory corruption when enabling fiber When configuring the fiber port, the DP83869 PHY driver incorrectly calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit number (10). This corrupts some other memory location -- in case of arm64 the priv pointer in the same structure. Since the advertising flags are updated from supported at the end of the function the incorrect line isn't needed at all and can be removed. | 5.5 |
Medium |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Stop the active perfmon before being destroyed Upon closing the file descriptor, the active performance monitor is not stopped. Although all perfmons are destroyed in `vc4_perfmon_close_file()`, the active performance monitor's pointer (`vc4->active_perfmon`) is still retained. If we open a new file descriptor and submit a few jobs with performance monitors, the driver will attempt to stop the active performance monitor using the stale pointer in `vc4->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. | 5.5 |
Medium |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: explicitly clear the sk pointer, when pf->create fails We have recently noticed the exact same KASAN splat as in commit 6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket creation fails"). The problem is that commit did not fully address the problem, as some pf->create implementations do not use sk_common_release in their error paths. For example, we can use the same reproducer as in the above commit, but changing ping to arping. arping uses AF_PACKET socket and if packet_create fails, it will just sk_free the allocated sk object. While we could chase all the pf->create implementations and make sure they NULL the freed sk object on error from the socket, we can't guarantee future protocols will not make the same mistake. So it is easier to just explicitly NULL the sk pointer upon return from pf->create in __sock_create. We do know that pf->create always releases the allocated sk object on error, so if the pointer is not NULL, it is definitely dangling. | 7.8 |
High |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mptcp: handle consistently DSS corruption Bugged peer implementation can send corrupted DSS options, consistently hitting a few warning in the data path. Use DEBUG_NET assertions, to avoid the splat on some builds and handle consistently the error, dumping related MIBs and performing fallback and/or reset according to the subflow type. | 5.5 |
Medium |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: virtio_pmem: Check device status before requesting flush If a pmem device is in a bad status, the driver side could wait for host ack forever in virtio_pmem_flush(), causing the system to hang. So add a status check in the beginning of virtio_pmem_flush() to return early if the device is not activated. | 5.5 |
Medium |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance Deleting an NPIV instance requires all fabric ndlps to be released before an NPIV's resources can be torn down. Failure to release fabric ndlps beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID to complete synchronously with usage of wait_queue. | 4.7 |
Medium |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: secretmem: disable memfd_secret() if arch cannot set direct map Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This is the case for example on some arm64 configurations, where marking 4k PTEs in the direct map not present can only be done if the direct map is set up at 4k granularity in the first place (as ARM's break-before-make semantics do not easily allow breaking apart large/gigantic pages). More precisely, on arm64 systems with !can_set_direct_map(), set_direct_map_invalid_noflush() is a no-op, however it returns success (0) instead of an error. This means that memfd_secret will seemingly "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), but it does not actually achieve its goal of removing its memory from the direct map. Note that with this patch, memfd_secret() will start erroring on systems where can_set_direct_map() returns false (arm64 with CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and CONFIG_KFENCE=n), but that still seems better than the current silent failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most arm64 systems actually have a working memfd_secret() and aren't be affected. From going through the iterations of the original memfd_secret patch series, it seems that disabling the syscall in these scenarios was the intended behavior [1] (preferred over having set_direct_map_invalid_noflush return an error as that would result in SIGBUSes at page-fault time), however the check for it got dropped between v16 [2] and v17 [3], when secretmem moved away from CMA allocations. [1]: https://lore.kernel.org/lkml/[email protected]/ [2]: https://lore.kernel.org/lkml/[email protected]/#t [3]: https://lore.kernel.org/lkml/[email protected]/ | 5.5 |
Medium |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D For i.MX7D DRAM related mux clock, the clock source change should ONLY be done done in low level asm code without accessing DRAM, and then calling clk API to sync the HW clock status with clk tree, it should never touch real clock source switch via clk API, so CLK_SET_PARENT_GATE flag should NOT be added, otherwise, DRAM's clock parent will be disabled when DRAM is active, and system will hang. | 5.5 |
Medium |
|
05h38 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fbdev: sisfb: Fix strbuf array overflow The values of the variables xres and yres are placed in strbuf. These variables are obtained from strbuf1. The strbuf1 array contains digit characters and a space if the array contains non-digit characters. Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres); more than 16 bytes will be written to strbuf. It is suggested to increase the size of the strbuf array to 24. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 7.8 |
High |
|
05h24 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ceph: remove the incorrect Fw reference check when dirtying pages When doing the direct-io reads it will also try to mark pages dirty, but for the read path it won't hold the Fw caps and there is case will it get the Fw reference. | 5.5 |
Medium |
|
05h24 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request() Use raw_smp_processor_id() instead of plain smp_processor_id() in do_service_request(), otherwise we may get some errors with the driver enabled: BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/208 caller is loongson3_cpufreq_probe+0x5c/0x250 [loongson3_cpufreq] | 5.5 |
Medium |
|
05h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix a UBSAN warning in DML2.1
When programming phantom pipe, since cursor_width is explicity set to 0,
this causes calculation logic to trigger overflow for an unsigned int
triggering the kernel's UBSAN check as below:
[ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34
[ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int'
[ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu
[ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024
[ 40.962856] Call Trace:
[ 40.962857] |
5.5 |
Medium |
|
05h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: remoteproc: k3-r5: Fix error handling when power-up failed By simply bailing out, the driver was violating its rule and internal assumptions that either both or no rproc should be initialized. E.g., this could cause the first core to be available but not the second one, leading to crashes on its shutdown later on while trying to dereference that second instance. | 5.5 |
Medium |
|
05h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: qcom: camss: Remove use_count guard in stop_streaming The use_count check was introduced so that multiple concurrent Raw Data Interfaces RDIs could be driven by different virtual channels VCs on the CSIPHY input driving the video pipeline. This is an invalid use of use_count though as use_count pertains to the number of times a video entity has been opened by user-space not the number of active streams. If use_count and stream-on count don't agree then stop_streaming() will break as is currently the case and has become apparent when using CAMSS with libcamera's released softisp 0.3. The use of use_count like this is a bit hacky and right now breaks regular usage of CAMSS for a single stream case. Stopping qcam results in the splat below, and then it cannot be started again and any attempts to do so fails with -EBUSY. [ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common] ... [ 1265.510630] Call trace: [ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common] [ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common] [ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2] [ 1265.510673] v4l_streamoff+0x24/0x30 [videodev] [ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev] [ 1265.510732] video_usercopy+0x304/0x8c4 [videodev] [ 1265.510757] video_ioctl2+0x18/0x34 [videodev] [ 1265.510782] v4l2_ioctl+0x40/0x60 [videodev] ... [ 1265.510944] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 0 in active state [ 1265.511175] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 1 in active state [ 1265.511398] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 2 in active st One CAMSS specific way to handle multiple VCs on the same RDI might be: - Reference count each pipeline enable for CSIPHY, CSID, VFE and RDIx. - The video buffers are already associated with msm_vfeN_rdiX so release video buffers when told to do so by stop_streaming. - Only release the power-domains for the CSIPHY, CSID and VFE when their internal refcounts drop. Either way refusing to release video buffers based on use_count is erroneous and should be reverted. The silicon enabling code for selecting VCs is perfectly fine. Its a "known missing feature" that concurrent VCs won't work with CAMSS right now. Initial testing with this code didn't show an error but, SoftISP and "real" usage with Google Hangouts breaks the upstream code pretty quickly, we need to do a partial revert and take another pass at VCs. This commit partially reverts commit 89013969e232 ("media: camss: sm8250: Pipeline starting and stopping for multiple virtual channels") | 5.5 |
Medium |
|
05h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix race when converting group handle to group object XArray provides it's own internal lock which protects the internal array when entries are being simultaneously added and removed. However there is still a race between retrieving the pointer from the XArray and incrementing the reference count. To avoid this race simply hold the internal XArray lock when incrementing the reference count, this ensures there cannot be a racing call to xa_erase(). | 4.7 |
Medium |
|
05h23 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix access to uninitialized variable in tick_ctx_cleanup() The group variable can't be used to retrieve ptdev in our second loop, because it points to the previously iterated list_head, not a valid group. Get the ptdev object from the scheduler instead. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix a possible memory leak In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails driver is not freeing the memory allocated for "rdev->chip_ctx". | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: systemport: fix potential memory leak in bcm_sysport_xmit() The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix potential memory leak in bcmasp_xmit() The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb in case of mapping fails, add dev_kfree_skb() to fix it. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vsock: Update rx_bytes on read_skb() Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt() calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after vsock_transport::read_skb(). While here, also inform the peer that we've freed up space and it has more credit. Failing to update rx_bytes after packet is dequeued leads to a warning on SOCK_STREAM recv(): [ 233.396654] rx_queue is empty, but rx_bytes is non-zero [ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589 | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/sun3_82586: fix potential memory leak in sun3_82586_send_packet() The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: be2net: fix potential memory leak in be_xmit() The be_xmit() returns NETDEV_TX_OK without freeing skb in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix refcount handling of fman-related devices In mac_probe() there are multiple calls to of_find_device_by_node(), fman_bind() and fman_port_bind() which takes references to of_dev->dev. Not all references taken by these calls are released later on error path in mac_probe() and in mac_remove() which lead to reference leaks. Add references release. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve param->string when parsing mount options In bpf_parse_param(), keep the value of param->string intact so it can be freed later. Otherwise, the kmalloc area pointed to by param->string will be leaked as shown below: unreferenced object 0xffff888118c46d20 (size 8): comm "new_name", pid 12109, jiffies 4295580214 hex dump (first 8 bytes): 61 6e 79 00 38 c9 5c 7e any.8.\~ backtrace (crc e1b7f876): [<00000000c6848ac7>] kmemleak_alloc+0x4b/0x80 [<00000000de9f7d00>] __kmalloc_node_track_caller_noprof+0x36e/0x4a0 [<000000003e29b886>] memdup_user+0x32/0xa0 [<0000000007248326>] strndup_user+0x46/0x60 [<0000000035b3dd29>] __x64_sys_fsconfig+0x368/0x3d0 [<0000000018657927>] x64_sys_call+0xff/0x9f0 [<00000000c0cabc95>] do_syscall_64+0x3b/0xc0 [<000000002f331597>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overloading of MEM_UNINIT's meaning Lonial reported an issue in the BPF verifier where check_mem_size_reg() has the following code: if (!tnum_is_const(reg->var_off)) /* For unprivileged variable accesses, disable raw * mode so that the program is required to * initialize all the memory that the helper could * just partially fill up. */ meta = NULL; This means that writes are not checked when the register containing the size of the passed buffer has not a fixed size. Through this bug, a BPF program can write to a map which is marked as read-only, for example, .rodata global maps. The problem is that MEM_UNINIT's initial meaning that "the passed buffer to the BPF helper does not need to be initialized" which was added back in commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type") got overloaded over time with "the passed buffer is being written to". The problem however is that checks such as the above which were added later via 06c1c049721a ("bpf: allow helpers access to variable memory") set meta to NULL in order force the user to always initialize the passed buffer to the helper. Due to the current double meaning of MEM_UNINIT, this bypasses verifier write checks to the memory (not boundary checks though) and only assumes the latter memory is read instead. Fix this by reverting MEM_UNINIT back to its original meaning, and having MEM_WRITE as an annotation to BPF helpers in order to then trigger the BPF verifier checks for writing to memory. Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO} we can access fn->arg_type[arg - 1] since it must contain a preceding ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed altogether since we do check both BPF_READ and BPF_WRITE. Same for the equivalent check_kfunc_mem_size_reg(). | 7.1 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Make sure internal and UAPI bpf_redirect flags don't overlap The bpf_redirect_info is shared between the SKB and XDP redirect paths, and the two paths use the same numeric flag values in the ri->flags field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that if skb bpf_redirect_neigh() is used with a non-NULL params argument and, subsequently, an XDP redirect is performed using the same bpf_redirect_info struct, the XDP path will get confused and end up crashing, which syzbot managed to trigger. With the stack-allocated bpf_redirect_info, the structure is no longer shared between the SKB and XDP paths, so the crash doesn't happen anymore. However, different code paths using identically-numbered flag values in the same struct field still seems like a bit of a mess, so this patch cleans that up by moving the flag definitions together and redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make sure the overlap is not re-introduced by mistake. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bpf: devmap: provide rxq after redirect
rxq contains a pointer to the device from where
the redirect happened. Currently, the BPF program
that was executed after a redirect via BPF_MAP_TYPE_DEVMAP*
does not have it set.
This is particularly bad since accessing ingress_ifindex, e.g.
SEC("xdp")
int prog(struct xdp_md *pkt)
{
return bpf_redirect_map(&dev_redirect_map, 0, 0);
}
SEC("xdp/devmap")
int prog_after_redirect(struct xdp_md *pkt)
{
bpf_printk("ifindex %i", pkt->ingress_ifindex);
return XDP_PASS;
}
depends on access to rxq, so a NULL pointer gets dereferenced:
<1>[ 574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000
<1>[ 574.475188] #PF: supervisor read access in kernel mode
<1>[ 574.475194] #PF: error_code(0x0000) - not-present page
<6>[ 574.475199] PGD 0 P4D 0
<4>[ 574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23
<4>[ 574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023
<4>[ 574.475231] Workqueue: mld mld_ifc_work
<4>[ 574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[ 574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b
<4>[ 574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206
<4>[ 574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000
<4>[ 574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0
<4>[ 574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001
<4>[ 574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000
<4>[ 574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000
<4>[ 574.475289] FS: 0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000
<4>[ 574.475294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0
<4>[ 574.475303] PKRU: 55555554
<4>[ 574.475306] Call Trace:
<4>[ 574.475313] |
5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the remaining info_cnt before repeating btf fields
When trying to repeat the btf fields for array of nested struct, it
doesn't check the remaining info_cnt. The following splat will be
reported when the value of ret * nelems is greater than BTF_FIELDS_MAX:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49
index 11 is out of range for type 'btf_field_info [11]'
CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
Call Trace:
|
5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs8409: Fix possible NULL dereference If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then NULL pointer dereference will occur in the next line. Since dolphin_fixups function is a hda_fixup function which is not supposed to return any errors, add simple check before dereference, ignore the fail. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup() Clang static checker(scan-build) throws below warning： | drivers/firmware/arm_scmi/driver.c:line 2915, column 2 | Attempt to free released memory. When devm_add_action_or_reset() fails, scmi_debugfs_common_cleanup() will run twice which causes double free of 'dbg->name'. Remove the redundant scmi_debugfs_common_cleanup() to fix this problem. | 7.8 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix out of bound check Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809 | 7.8 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop Driver waits indefinitely for the fifo occupancy to go below a threshold as soon as the pacing interrupt is received. This can cause soft lockup on one of the processors, if the rate of DB is very high. Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th if the loop is taking more time. Pacing will be continuing until the occupancy is below the threshold. This is ensured by the checks in bnxt_re_pacing_timer_exp and further scheduling the work for pacing based on the fifo occupancy. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/msm: Avoid NULL dereference in msm_disp_state_print_regs() If the allocation in msm_disp_state_dump_regs() failed then `block->state` can be NULL. The msm_disp_state_print_regs() function _does_ have code to try to handle it with: if (*reg) dump_addr = *reg; ...but since "dump_addr" is initialized to NULL the above is actually a noop. The code then goes on to dereference `dump_addr`. Make the function print "Registers not stored" when it sees a NULL to solve this. Since we're touching the code, fix msm_disp_state_print_regs() not to pointlessly take a double-pointer and properly mark the pointer as `const`. Patchwork: https://patchwork.freedesktop.org/patch/619657/ | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netdevsim: use cond_resched() in nsim_dev_trap_report_work()
I am still seeing many syzbot reports hinting that syzbot
might fool nsim_dev_trap_report_work() with hundreds of ports [1]
Lets use cond_resched(), and system_unbound_wq
instead of implicit system_wq.
[1]
INFO: task syz-executor:20633 blocked for more than 143 seconds.
Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:25856 pid:20633 tgid:20633 ppid:1 flags:0x00004006
...
NMI backtrace for cpu 1
CPU: 1 UID: 0 PID: 16760 Comm: kworker/1:0 Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events nsim_dev_trap_report_work
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:210
Code: 89 fb e8 23 00 00 00 48 8b 3d 04 fb 9c 0c 48 89 de 5b e9 c3 c7 5d 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 |
7.8 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink(). Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler(). """ We are seeing a use-after-free from a bpf prog attached to trace_tcp_retransmit_synack. The program passes the req->sk to the bpf_sk_storage_get_tracing kernel helper which does check for null before using it. """ The commit 83fccfc3940c ("inet: fix potential deadlock in reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not to call del_timer_sync() from reqsk_timer_handler(), but it introduced a small race window. Before the timer is called, expire_timers() calls detach_timer(timer, true) to clear timer->entry.pprev and marks it as not pending. If reqsk_queue_unlink() checks timer_pending() just after expire_timers() calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will continue running and send multiple SYN+ACKs until it expires. The reported UAF could happen if req->sk is close()d earlier than the timer expiration, which is 63s by default. The scenario would be 1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(), but del_timer_sync() is missed 2. reqsk timer is executed and scheduled again 3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but reqsk timer still has another one, and inet_csk_accept() does not clear req->sk for non-TFO sockets 4. sk is close()d 5. reqsk timer is executed again, and BPF touches req->sk Let's not use timer_pending() by passing the caller context to __inet_csk_reqsk_queue_drop(). Note that reqsk timer is pinned, so the issue does not happen in most use cases. [1] [0] BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0 Use-after-free read at 0x00000000a891fb3a (in kfence-#1): bpf_sk_storage_get_tracing+0x2e/0x1b0 bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda bpf_trace_run2+0x4c/0xc0 tcp_rtx_synack+0xf9/0x100 reqsk_timer_handler+0xda/0x3d0 run_timer_softirq+0x292/0x8a0 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 intel_idle_irq+0x5a/0xa0 cpuidle_enter_state+0x94/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6 allocated by task 0 on cpu 9 at 260507.901592s: sk_prot_alloc+0x35/0x140 sk_clone_lock+0x1f/0x3f0 inet_csk_clone_lock+0x15/0x160 tcp_create_openreq_child+0x1f/0x410 tcp_v6_syn_recv_sock+0x1da/0x700 tcp_check_req+0x1fb/0x510 tcp_v6_rcv+0x98b/0x1420 ipv6_list_rcv+0x2258/0x26e0 napi_complete_done+0x5b1/0x2990 mlx5e_napi_poll+0x2ae/0x8d0 net_rx_action+0x13e/0x590 irq_exit_rcu+0xf5/0x320 common_interrupt+0x80/0x90 asm_common_interrupt+0x22/0x40 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb freed by task 0 on cpu 9 at 260507.927527s: rcu_core_si+0x4ff/0xf10 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb | 7.8 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix null-ptr-deref in target_alloc_device() There is a null-ptr-deref issue reported by KASAN: BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod] ... kasan_report+0xb9/0xf0 target_alloc_device+0xbc4/0xbe0 [target_core_mod] core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod] target_core_init_configfs+0x205/0x420 [target_core_mod] do_one_initcall+0xdd/0x4e0 ... entry_SYSCALL_64_after_hwframe+0x76/0x7e In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem. Fixing this bug by freeing dev with hba->backend->ops->free_device(). | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix possible double free in smb2_set_ea() Clang static checker(scan-build) warning： fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory. 1304 | kfree(ea); | ^~~~~~~~~ There is a double free in such case: 'ea is initialized to NULL' -> 'first successful memory allocation for ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea' -> 'goto replay_again' -> 'second goto sea_exit before allocate memory for ea' -> 'second memory release for ea resulted in double free'. Re-initialie 'ea' to NULL near to the replay_again label, it can fix this double free problem. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOBs when building SMB2_IOCTL request
When using encryption, either enforced by the server or when using
'seal' mount option, the client will squash all compound request buffers
down for encryption into a single iov in smb2_set_next_command().
SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the
SMB2_IOCTL request in the first iov, and if the user passes an input
buffer that is greater than 328 bytes, smb2_set_next_command() will
end up writing off the end of @rqst->iov[0].iov_base as shown below:
mount.cifs //srv/share /mnt -o ...,seal
ln -s $(perl -e "print('a')for 1..1024") /mnt/link
BUG: KASAN: slab-out-of-bounds in
smb2_set_next_command.cold+0x1d6/0x24c [cifs]
Write of size 4116 at addr ffff8881148fcab8 by task ln/859
CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-2.fc40 04/01/2014
Call Trace:
|
7.8 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmode should keep reference to parent
The altmode device release refers to its parent device, but without keeping
a reference to it.
When registering the altmode, get a reference to the parent and put it in
the release function.
Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues
like this:
[ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000)
[ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000)
[ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000)
[ 46.612867] ==================================================================
[ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129
[ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48
[ 46.614538]
[ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535
[ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 46.616042] Workqueue: events kobject_delayed_cleanup
[ 46.616446] Call Trace:
[ 46.616648] |
7.8 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't free job in TDR Freeing job in TDR is not safe as TDR can pass the run_job thread resulting in UAF. It is only safe for free job to naturally be called by the scheduler. Rather free job in TDR, add to pending list. (cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d) | 7.8 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: fix wild-memory-access in proto_unregister
There's issue as follows:
KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W
RIP: 0010:proto_unregister+0xee/0x400
Call Trace:
|
5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix command bitmask initialization
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
|
5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't call cleanup on profile rollback failure
When profile rollback fails in mlx5e_netdev_change_profile, the netdev
profile var is left set to NULL. Avoid a crash when unloading the driver
by not calling profile->cleanup in such a case.
This was encountered while testing, with the original trigger that
the wq rescuer thread creation got interrupted (presumably due to
Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by
mlx5e_priv_init, the profile rollback also fails for the same reason
(signal still active) so the profile is left as NULL, leading to a crash
later in _mlx5e_remove.
[ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)
[ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12
[ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
[ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 745.538222] #PF: supervisor read access in kernel mode
|
5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx() build_skb() returns NULL in case of a memory allocation failure so handle it inside __octep_oq_process_rx() to avoid NULL pointer dereference. __octep_oq_process_rx() is called during NAPI polling by the driver. If skb allocation fails, keep on pulling packets out of the Rx DMA queue: we shouldn't break the polling immediately and thus falsely indicate to the octep_napi_poll() that the Rx pressure is going down. As there is no associated skb in this case, don't process the packets and don't push them up the network stack - they are skipped. Helper function is implemented to unmmap/flush all the fragment buffers used by the dropped packet. 'alloc_failures' counter is incremented to mark the skb allocation error in driver statistics. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix unbalanced rpm put() with fence_fini() Currently we can call fence_fini() twice if something goes wrong when sending the GuC CT for the tlb request, since we signal the fence and return an error, leading to the caller also calling fini() on the error path in the case of stack version of the flow, which leads to an extra rpm put() which might later cause device to enter suspend when it shouldn't. It looks like we can just drop the fini() call since the fence signaller side will already call this for us. There are known mysterious splats with device going to sleep even with an rpm ref, and this could be one candidate. v2 (Matt B): - Prefer warning if we detect double fini() (cherry picked from commit cfcbc0520d5055825f0647ab922b655688605183) | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: udf: fix uninit-value use in udf_get_fileshortad Check for overflow when computing alen in udf_current_aext to mitigate later uninit-value use in udf_get_fileshortad KMSAN bug[1]. After applying the patch reproducer did not trigger any issue[2]. [1] https://syzkaller.appspot.com/bug?extid=8901c4560b7ab5c2f9df [2] https://syzkaller.appspot.com/x/log.txt?x=10242227980000 | 7.8 |
High |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: xfrm: validate new SA's prefixlen using SA family when sel.family is unset This expands the validation introduced in commit 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.") syzbot created an SA with usersa.sel.family = AF_UNSPEC usersa.sel.prefixlen_s = 128 usersa.family = AF_INET Because of the AF_UNSPEC selector, verify_newsa_info doesn't put limits on prefixlen_{s,d}. But then copy_from_user_state sets x->sel.family to usersa.family (AF_INET). Do the same conversion in verify_newsa_info before validating prefixlen_{s,d}, since that's how prefixlen is going to be used later on. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context PRMT needs to find the correct type of block to translate the PA-VA mapping for EFI runtime services. The issue arises because the PRMT is finding a block of type EFI_CONVENTIONAL_MEMORY, which is not appropriate for runtime services as described in Section 2.2.2 (Runtime Services) of the UEFI Specification [1]. Since the PRM handler is a type of runtime service, this causes an exception when the PRM handler is called. [Firmware Bug]: Unable to handle paging request in EFI runtime service WARNING: CPU: 22 PID: 4330 at drivers/firmware/efi/runtime-wrappers.c:341 __efi_queue_work+0x11c/0x170 Call trace: Let PRMT find a block with EFI_MEMORY_RUNTIME for PRM handler and PRM context. If no suitable block is found, a warning message will be printed, but the procedure continues to manage the next PRM handler. However, if the PRM handler is actually called without proper allocation, it would result in a failure during error handling. By using the correct memory types for runtime services, ensure that the PRM handler and the context are properly mapped in the virtual address space during runtime, preventing the paging request error. The issue is really that only memory that has been remapped for runtime by the firmware can be used by the PRM handler, and so the region needs to have the EFI_MEMORY_RUNTIME attribute. [ rjw: Subject and changelog edits ] | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sched/core: Disable page allocation in task_tick_mm_cid() With KASAN and PREEMPT_RT enabled, calling task_work_add() in task_tick_mm_cid() may cause the following splat. [ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe [ 63.696416] preempt_count: 10001, expected: 0 [ 63.696416] RCU nest depth: 1, expected: 1 This problem is caused by the following call trace. sched_tick() [ acquire rq->__lock ] -> task_tick_mm_cid() -> task_work_add() -> __kasan_record_aux_stack() -> kasan_save_stack() -> stack_depot_save_flags() -> alloc_pages_mpol_noprof() -> __alloc_pages_noprof() -> get_page_from_freelist() -> rmqueue() -> rmqueue_pcplist() -> __rmqueue_pcplist() -> rmqueue_bulk() -> rt_spin_lock() The rq lock is a raw_spinlock_t. We can't sleep while holding it. IOW, we can't call alloc_pages() in stack_depot_save_flags(). The task_tick_mm_cid() function with its task_work_add() call was introduced by commit 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") in v6.4 kernel. Fortunately, there is a kasan_record_aux_stack_noalloc() variant that calls stack_depot_save_flags() while not allowing it to allocate new pages. To allow task_tick_mm_cid() to use task_work without page allocation, a new TWAF_NO_ALLOC flag is added to enable calling kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack() if set. The task_tick_mm_cid() function is modified to add this new flag. The possible downside is the missing stack trace in a KASAN report due to new page allocation required when task_work_add_noallloc() is called which should be rare. | 5.5 |
Medium |
|
09h31 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix shift-out-of-bounds bug Fix a shift-out-of-bounds bug reported by UBSAN when running VM with MTE enabled host kernel. UBSAN: shift-out-of-bounds in arch/arm64/kvm/sys_regs.c:1988:14 shift exponent 33 is too large for 32-bit type 'int' CPU: 26 UID: 0 PID: 7629 Comm: qemu-kvm Not tainted 6.12.0-rc2 #34 Hardware name: IEI NF5280R7/Mitchell MB, BIOS 00.00. 2024-10-12 09:28:54 10/14/2024 Call trace: dump_backtrace+0xa0/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x74/0x90 dump_stack+0x18/0x28 __ubsan_handle_shift_out_of_bounds+0xf8/0x1e0 reset_clidr+0x10c/0x1c8 kvm_reset_sys_regs+0x50/0x1c8 kvm_reset_vcpu+0xec/0x2b0 __kvm_vcpu_set_target+0x84/0x158 kvm_vcpu_set_target+0x138/0x168 kvm_arch_vcpu_ioctl_vcpu_init+0x40/0x2b0 kvm_arch_vcpu_ioctl+0x28c/0x4b8 kvm_vcpu_ioctl+0x4bc/0x7a8 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x70/0x100 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x158 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x194/0x198 | 5.5 |
Medium |
|
17h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bpf: Use raw_spinlock_t in ringbuf
The function __bpf_ringbuf_reserve is invoked from a tracepoint, which
disables preemption. Using spinlock_t in this context can lead to a
"sleep in atomic" warning in the RT variant. This issue is illustrated
in the example below:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
INFO: lockdep is turned off.
Preemption disabled at:
[ |
5.5 |
Medium |
|
17h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC data->asserted will be NULL on JH7110 SoC since commit 82327b127d41 ("reset: starfive: Add StarFive JH7110 reset driver") was added. Add the judgment condition to avoid errors when calling reset_control_status on JH7110 SoC. | 5.5 |
Medium |
|
17h11 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Unregister notifier on eswitch init failure
It otherwise remains registered and a subsequent attempt at eswitch
enabling might trigger warnings of the sort:
[ 682.589148] ------------[ cut here ]------------
[ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered
[ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90
[...snipped]
[ 682.610052] Call Trace:
[ 682.610369] |
5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix race condition between reset and nvme_dev_disable()
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
|
4.7 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/vboxvideo: Replace fake VLA at end of vbva_mouse_pointer_shape with real VLA Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with a real VLA to fix a "memcpy: detected field-spanning write error" warning: [ 13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4) [ 13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo] [ 13.320038] Call Trace: [ 13.320173] hgsmi_update_pointer_shape [vboxvideo] [ 13.320184] vbox_cursor_atomic_update [vboxvideo] Note as mentioned in the added comment it seems the original length calculation for the allocated and send hgsmi buffer is 4 bytes too large. Changing this is not the goal of this patch, so this behavior is kept. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: LoongArch: Don't crash in stack_top() for tasks without vDSO Not all tasks have a vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL vdso pointer and crash. This can for example happen when using kunit: [<9000000000203874>] stack_top+0x58/0xa8 [<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220 [<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c [<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c [<90000000003c2704>] kunit_vm_mmap+0x88/0xc8 [<9000000000410b14>] usercopy_test_init+0xbc/0x25c [<90000000003c1db4>] kunit_try_run_case+0x5c/0x184 [<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48 [<900000000022e4bc>] kthread+0xc8/0xd4 [<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4 | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix MAX_TRACE_ARGS limit handling When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tracing: Consider the NULL character when validating the event length strlen() returns a string length excluding the null byte. If the string length equals to the maximum buffer length, the buffer will have no space for the NULL terminating character. This commit checks this condition and returns failure for it. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: must hold reference on net namespace BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0 Read of size 8 at addr ffff8880106fe400 by task repro/72= bpf_nf_link_release+0xda/0x1e0 bpf_link_free+0x139/0x2d0 bpf_link_release+0x68/0x80 __fput+0x414/0xb60 Eric says: It seems that bpf was able to defer the __nf_unregister_net_hook() after exit()/close() time. Perhaps a netns reference is missing, because the netns has been dismantled/freed already. bpf_nf_link_attach() does : link->net = net; But I do not see a reference being taken on net. Add such a reference and release it after hook unreg. Note that I was unable to get syzbot reproducer to work, so I do not know if this resolves this splat. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: pse-pd: Fix out of bound for loop Adjust the loop limit to prevent out-of-bounds access when iterating over PI structures. The loop should not reach the index pcdev->nr_lines since we allocate exactly pcdev->nr_lines number of PI structures. This fix ensures proper bounds are maintained during iterations. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: fix global oob in wwan_rtnl_policy
The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to
a global out-of-bounds read when parsing the netlink attributes. Exactly
same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm:
rmnet: fix global oob in rmnet_policy").
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862
CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
|
7.1 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: sched: fix use-after-free in taprio_change() In 'taprio_change()', 'admin' pointer may become dangling due to sched switch / removal caused by 'advance_sched()', and critical section protected by 'q->current_entry_lock' is too small to prevent from such a scenario (which causes use-after-free detected by KASAN). Fix this by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update 'admin' immediately before an attempt to schedule freeing. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: sched: use RCU read-side critical section in taprio_dump() Fix possible use-after-free in 'taprio_dump()' by adding RCU read-side critical section there. Never seen on x86 but found on a KASAN-enabled arm64 system when investigating https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa: [T15862] BUG: KASAN: slab-use-after-free in taprio_dump+0xa0c/0xbb0 [T15862] Read of size 4 at addr ffff0000d4bb88f8 by task repro/15862 [T15862] [T15862] CPU: 0 UID: 0 PID: 15862 Comm: repro Not tainted 6.11.0-rc1-00293-gdefaf1a2113a-dirty #2 [T15862] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-20240524-5.fc40 05/24/2024 [T15862] Call trace: [T15862] dump_backtrace+0x20c/0x220 [T15862] show_stack+0x2c/0x40 [T15862] dump_stack_lvl+0xf8/0x174 [T15862] print_report+0x170/0x4d8 [T15862] kasan_report+0xb8/0x1d4 [T15862] __asan_report_load4_noabort+0x20/0x2c [T15862] taprio_dump+0xa0c/0xbb0 [T15862] tc_fill_qdisc+0x540/0x1020 [T15862] qdisc_notify.isra.0+0x330/0x3a0 [T15862] tc_modify_qdisc+0x7b8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Allocated by task 15857: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_alloc_info+0x40/0x60 [T15862] __kasan_kmalloc+0xd4/0xe0 [T15862] __kmalloc_cache_noprof+0x194/0x334 [T15862] taprio_change+0x45c/0x2fe0 [T15862] tc_modify_qdisc+0x6a8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Freed by task 6192: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_free_info+0x4c/0x80 [T15862] poison_slab_object+0x110/0x160 [T15862] __kasan_slab_free+0x3c/0x74 [T15862] kfree+0x134/0x3c0 [T15862] taprio_free_sched_cb+0x18c/0x220 [T15862] rcu_core+0x920/0x1b7c [T15862] rcu_core_si+0x10/0x1c [T15862] handle_softirqs+0x2e8/0xd64 [T15862] __do_softirq+0x14/0x20 | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_sock_timeout conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock so this checks if the conn->sk is still valid by checking if it part of sco_sk_list. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix UAF on iso_sock_timeout conn->sk maybe have been unlinked/freed while waiting for iso_conn_lock so this checks if the conn->sk is still valid by checking if it part of iso_sk_list. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Add the missing BPF_LINK_TYPE invocation for sockmap There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for sockmap link Also add comments for bpf_link_type to prevent missing updates in the future. | 7.1 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI: Hold rescan lock while adding devices during host probe Since adding the PCI power control code, we may end up with a race between the pwrctl platform device rescanning the bus and host controller probe functions. The latter need to take the rescan lock when adding devices or we may end up in an undefined state having two incompletely added devices and hit the following crash when trying to remove the device over sysfs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Call trace: __pi_strlen+0x14/0x150 kernfs_find_ns+0x80/0x13c kernfs_remove_by_name_ns+0x54/0xf0 sysfs_remove_bin_file+0x24/0x34 pci_remove_resource_files+0x3c/0x84 pci_remove_sysfs_dev_files+0x28/0x38 pci_stop_bus_device+0x8c/0xd8 pci_stop_bus_device+0x40/0xd8 pci_stop_and_remove_bus_device_locked+0x28/0x48 remove_store+0x70/0xb0 dev_attr_store+0x20/0x38 sysfs_kf_write+0x58/0x78 kernfs_fop_write_iter+0xe8/0x184 vfs_write+0x2dc/0x308 ksys_write+0x7c/0xec | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will release all resources related to the hashed `nfs4_client`. If the `nfsd_client_shrinker` is running concurrently, the `expire_client` function will first unhash this client and then destroy it. This can lead to the following warning. Additionally, numerous use-after-free errors may occur as well. nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads expire_client nfsd_shutdown_net unhash_client ... nfs4_state_shutdown_net /* won't wait shrinker exit */ /* cancel_work(&nn->nfsd_shrinker_work) * nfsd_file for this /* won't destroy unhashed client1 */ * client1 still alive nfs4_state_destroy_net */ nfsd_file_cache_shutdown /* trigger warning */ kmem_cache_destroy(nfsd_file_slab) kmem_cache_destroy(nfsd_file_mark_slab) /* release nfsd_file and mark */ __destroy_client ==================================================================== BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() -------------------------------------------------------------------- CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1 dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xac/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e ==================================================================== BUG nfsd_file_mark (Tainted: G B W ): Objects remaining nfsd_file_mark on __kmem_cache_shutdown() -------------------------------------------------------------------- dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xc8/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e To resolve this issue, cancel `nfsd_shrinker_work` using synchronous mode in nfs4_state_shutdown_net. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: smb: client: Handle kstrdup failures for passwords In smb3_reconfigure(), after duplicating ctx->password and ctx->password2 with kstrdup(), we need to check for allocation failures. If ses->password allocation fails, return -ENOMEM. If ses->password2 allocation fails, free ses->password, set it to NULL, and return -ENOMEM. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
cifs: fix warning when destroy 'cifs_io_request_pool'
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
|
5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
[BUG]
Syzbot reports the following crash:
BTRFS info (device loop0 state MCS): disabling free space tree
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
BTRFS info (device loop0 state MCS): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:backup_super_roots fs/btrfs/disk-io.c:1691 [inline]
RIP: 0010:write_all_supers+0x97a/0x40f0 fs/btrfs/disk-io.c:4041
Call Trace:
|
5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd: Guard against bad data for ATIF ACPI method If a BIOS provides bad data in response to an ATIF method call this causes a NULL pointer dereference in the caller. ``` ? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1)) ? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434) ? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2)) ? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1)) ? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642) ? exc_page_fault (arch/x86/mm/fault.c:1542) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu ``` It has been encountered on at least one system, so guard for it. (cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee) | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug due to missing clearing of buffer delay flag Syzbot reported that after nilfs2 reads a corrupted file system image and degrades to read-only, the BUG_ON check for the buffer delay flag in submit_bh_wbc() may fail, causing a kernel bug. This is because the buffer delay flag is not cleared when clearing the buffer state flags to discard a page/folio or a buffer head. So, fix this. This became necessary when the use of nilfs2's own page clear routine was expanded. This state inconsistency does not occur if the buffer is written normally by log writing. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory Ignore nCR3[4:0] when loading PDPTEs from memory for nested SVM, as bits 4:0 of CR3 are ignored when PAE paging is used, and thus VMRUN doesn't enforce 32-byte alignment of nCR3. In the absolute worst case scenario, failure to ignore bits 4:0 can result in an out-of-bounds read, e.g. if the target page is at the end of a memslot, and the VMM isn't using guard pages. Per the APM: The CR3 register points to the base address of the page-directory-pointer table. The page-directory-pointer table is aligned on a 32-byte boundary, with the low 5 address bits 4:0 assumed to be 0. And the SDM's much more explicit: 4:0 Ignored Note, KVM gets this right when loading PDPTRs, it's only the nSVM flow that is broken. | 7.1 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unregister redistributor for failed vCPU creation Alex reports that syzkaller has managed to trigger a use-after-free when tearing down a VM: BUG: KASAN: slab-use-after-free in kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769 Read of size 8 at addr ffffff801c6890d0 by task syz.3.2219/10758 CPU: 3 UID: 0 PID: 10758 Comm: syz.3.2219 Not tainted 6.11.0-rc6-dirty #64 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x17c/0x1a8 arch/arm64/kernel/stacktrace.c:317 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:324 __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x94/0xc0 lib/dump_stack.c:119 print_report+0x144/0x7a4 mm/kasan/report.c:377 kasan_report+0xcc/0x128 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769 kvm_vm_release+0x4c/0x60 virt/kvm/kvm_main.c:1409 __fput+0x198/0x71c fs/file_table.c:422 ____fput+0x20/0x30 fs/file_table.c:450 task_work_run+0x1cc/0x23c kernel/task_work.c:228 do_notify_resume+0x144/0x1a0 include/linux/resume_user_mode.h:50 el0_svc+0x64/0x68 arch/arm64/kernel/entry-common.c:169 el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Upon closer inspection, it appears that we do not properly tear down the MMIO registration for a vCPU that fails creation late in the game, e.g. a vCPU w/ the same ID already exists in the VM. It is important to consider the context of commit that introduced this bug by moving the unregistration out of __kvm_vgic_vcpu_destroy(). That change correctly sought to avoid an srcu v. config_lock inversion by breaking up the vCPU teardown into two parts, one guarded by the config_lock. Fix the use-after-free while avoiding lock inversion by adding a special-cased unregistration to __kvm_vgic_vcpu_destroy(). This is safe because failed vCPUs are torn down outside of the config_lock. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix invalid port index for parent device In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self ID sequence"), the enumeration over self ID sequence was refactored with some helper functions with KUnit tests. These helper functions are guaranteed to work expectedly by the KUnit tests, however their application includes a mistake to assign invalid value to the index of port connected to parent device. This bug affects the case that any extra node devices which has three or more ports are connected to 1394 OHCI controller. In the case, the path to update the tree cache could hits WARN_ON(), and gets general protection fault due to the access to invalid address computed by the invalid value. This commit fixes the bug to assign correct port index. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/lam: Disable ADDRESS_MASKING in most cases Linear Address Masking (LAM) has a weakness related to transient execution as described in the SLAM paper[1]. Unless Linear Address Space Separation (LASS) is enabled this weakness may be exploitable. Until kernel adds support for LASS[2], only allow LAM for COMPILE_TEST, or when speculation mitigations have been disabled at compile time, otherwise keep LAM disabled. There are no processors in market that support LAM yet, so currently nobody is affected by this issue. [1] SLAM: https://download.vusec.net/papers/slam_sp24.pdf [2] LASS: https://lore.kernel.org/lkml/[email protected]/ [ dhansen: update SPECULATION_MITIGATIONS -> CPU_MITIGATIONS ] | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context Unaligned access exception can be triggered in irq-enabled context such as user mode, in this case do_ale() may call get_user() which may cause sleep. Then we will get: BUG: sleeping function called from invalid context at arch/loongarch/kernel/access-helper.h:7 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 129, name: modprobe preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 129 Comm: modprobe Tainted: G W 6.12.0-rc1+ #1723 Tainted: [W]=WARN Stack : 9000000105e0bd48 0000000000000000 9000000003803944 9000000105e08000 9000000105e0bc70 9000000105e0bc78 0000000000000000 0000000000000000 9000000105e0bc78 0000000000000001 9000000185e0ba07 9000000105e0b890 ffffffffffffffff 9000000105e0bc78 73924b81763be05b 9000000100194500 000000000000020c 000000000000000a 0000000000000000 0000000000000003 00000000000023f0 00000000000e1401 00000000072f8000 0000007ffbb0e260 0000000000000000 0000000000000000 9000000005437650 90000000055d5000 0000000000000000 0000000000000003 0000007ffbb0e1f0 0000000000000000 0000005567b00490 0000000000000000 9000000003803964 0000007ffbb0dfec 00000000000000b0 0000000000000007 0000000000000003 0000000000071c1d ... Call Trace: [<9000000003803964>] show_stack+0x64/0x1a0 [<9000000004c57464>] dump_stack_lvl+0x74/0xb0 [<9000000003861ab4>] __might_resched+0x154/0x1a0 [<900000000380c96c>] emulate_load_store_insn+0x6c/0xf60 [<9000000004c58118>] do_ale+0x78/0x180 [<9000000003801bc8>] handle_ale+0x128/0x1e0 So enable IRQ if unaligned access exception is triggered in irq-enabled context to fix it. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: xfrm: fix one more kernel-infoleak in algo dumping During fuzz testing, the following issue was discovered: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x598/0x2a30 _copy_to_iter+0x598/0x2a30 __skb_datagram_iter+0x168/0x1060 skb_copy_datagram_iter+0x5b/0x220 netlink_recvmsg+0x362/0x1700 sock_recvmsg+0x2dc/0x390 __sys_recvfrom+0x381/0x6d0 __x64_sys_recvfrom+0x130/0x200 x64_sys_call+0x32c8/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was stored to memory at: copy_to_user_state_extra+0xcc1/0x1e00 dump_one_state+0x28c/0x5f0 xfrm_state_walk+0x548/0x11e0 xfrm_dump_sa+0x1e0/0x840 netlink_dump+0x943/0x1c40 __netlink_dump_start+0x746/0xdb0 xfrm_user_rcv_msg+0x429/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Uninit was created at: __kmalloc+0x571/0xd30 attach_auth+0x106/0x3e0 xfrm_add_sa+0x2aa0/0x4230 xfrm_user_rcv_msg+0x832/0xc00 netlink_rcv_skb+0x613/0x780 xfrm_netlink_rcv+0x77/0xc0 netlink_unicast+0xe90/0x1280 netlink_sendmsg+0x126d/0x1490 __sock_sendmsg+0x332/0x3d0 ____sys_sendmsg+0x863/0xc30 ___sys_sendmsg+0x285/0x3e0 __x64_sys_sendmsg+0x2d6/0x560 x64_sys_call+0x1316/0x3cc0 do_syscall_64+0xd8/0x1c0 entry_SYSCALL_64_after_hwframe+0x79/0x81 Bytes 328-379 of 732 are uninitialized Memory access of size 732 starts at ffff88800e18e000 Data copied to user address 00007ff30f48aff0 CPU: 2 PID: 18167 Comm: syz-executor.0 Not tainted 6.8.11 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Fixes copying of xfrm algorithms where some random data of the structure fields can end up in userspace. Padding in structures may be filled with random (possibly sensitve) data and should never be given directly to user-space. A similar issue was resolved in the commit 8222d5910dae ("xfrm: Zero padding when dumping algos and encap") Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null ptr dereference in raid10_size() In raid10_run() if raid10_set_queue_limits() succeed, the return value is set to zero, and if following procedures failed raid10_run() will return zero while mddev->private is still NULL, causing null ptr dereference in raid10_size(). Fix the problem by only overwrite the return value if raid10_set_queue_limits() failed. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too Stuart Hayhurst has found that both at bootup and fullscreen VA-API video is leading to black screens for around 1 second and kernel WARNING [1] traces when calling dmub_psr_enable() with Parade 08-01 TCON. These symptoms all go away with PSR-SU disabled for this TCON, so disable it for now while DMUB traces [2] from the failure can be analyzed and the failure state properly root caused. (cherry picked from commit afb634a6823d8d9db23c5fb04f79c5549349628b) | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses
Commit 50c6dbdfd16e ("x86/ioremap: Improve iounmap() address range checks")
introduces a WARN when adrress ranges of iounmap are invalid. On Thinkpad
P1 Gen 7 (Meteor Lake-P) this caused the following warning to appear:
WARNING: CPU: 7 PID: 713 at arch/x86/mm/ioremap.c:461 iounmap+0x58/0x1f0
Modules linked in: rfkill(+) snd_timer(+) fjes(+) snd soundcore intel_pmc_core(+)
int3403_thermal(+) int340x_thermal_zone intel_vsec pmt_telemetry acpi_pad pmt_class
acpi_tad int3400_thermal acpi_thermal_rel joydev loop nfnetlink zram xe drm_suballoc_helper
nouveau i915 mxm_wmi drm_ttm_helper gpu_sched drm_gpuvm drm_exec drm_buddy i2c_algo_bit
crct10dif_pclmul crc32_pclmul ttm crc32c_intel polyval_clmulni rtsx_pci_sdmmc ucsi_acpi
polyval_generic mmc_core hid_multitouch drm_display_helper ghash_clmulni_intel typec_ucsi
nvme sha512_ssse3 video sha256_ssse3 nvme_core intel_vpu sha1_ssse3 rtsx_pci cec typec
nvme_auth i2c_hid_acpi i2c_hid wmi pinctrl_meteorlake serio_raw ip6_tables ip_tables fuse
CPU: 7 UID: 0 PID: 713 Comm: (udev-worker) Not tainted 6.12.0-rc2iounmap+ #42
Hardware name: LENOVO 21KWCTO1WW/21KWCTO1WW, BIOS N48ET19W (1.06 ) 07/18/2024
RIP: 0010:iounmap+0x58/0x1f0
Code: 85 6a 01 00 00 48 8b 05 e6 e2 28 04 48 39 c5 72 19 eb 26 cc cc cc 48 ba 00 00 00 00 00 00 32 00 48 8d 44 02 ff 48 39 c5 72 23 <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 cc cc cc cc 48 ba 00 00 00 00 00
RSP: 0018:ffff888131eff038 EFLAGS: 00010207
RAX: ffffc90000000000 RBX: 0000000000000000 RCX: ffff888e33b80000
RDX: dffffc0000000000 RSI: ffff888e33bc29c0 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8881598a8000 R09: ffff888e2ccedc10
R10: 0000000000000003 R11: ffffffffb3367634 R12: 00000000fe000000
R13: ffff888101d0da28 R14: ffffffffc2e437e0 R15: ffff888110b03b28
FS: 00007f3c1d4b3980(0000) GS:ffff888e33b80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005651cfc93578 CR3: 0000000124e4c002 CR4: 0000000000f70ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfsd: fix race between laundromat and free_stateid There is a race between laundromat handling of revoked delegations and a client sending free_stateid operation. Laundromat thread finds that delegation has expired and needs to be revoked so it marks the delegation stid revoked and it puts it on a reaper list but then it unlock the state lock and the actual delegation revocation happens without the lock. Once the stid is marked revoked a racing free_stateid processing thread does the following (1) it calls list_del_init() which removes it from the reaper list and (2) frees the delegation stid structure. The laundromat thread ends up not calling the revoke_delegation() function for this particular delegation but that means it will no release the lock lease that exists on the file. Now, a new open for this file comes in and ends up finding that lease list isn't empty and calls nfsd_breaker_owns_lease() which ends up trying to derefence a freed delegation stateid. Leading to the followint use-after-free KASAN warning: kernel: ================================================================== kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205 kernel: kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ #9 kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024 kernel: Call trace: kernel: dump_backtrace+0x98/0x120 kernel: show_stack+0x1c/0x30 kernel: dump_stack_lvl+0x80/0xe8 kernel: print_address_description.constprop.0+0x84/0x390 kernel: print_report+0xa4/0x268 kernel: kasan_report+0xb4/0xf8 kernel: __asan_report_load8_noabort+0x1c/0x28 kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd] kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd] kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd] kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd] kernel: nfsd4_open+0xa08/0xe80 [nfsd] kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd] kernel: nfsd_dispatch+0x22c/0x718 [nfsd] kernel: svc_process_common+0x8e8/0x1960 [sunrpc] kernel: svc_process+0x3d4/0x7e0 [sunrpc] kernel: svc_handle_xprt+0x828/0xe10 [sunrpc] kernel: svc_recv+0x2cc/0x6a8 [sunrpc] kernel: nfsd+0x270/0x400 [nfsd] kernel: kthread+0x288/0x310 kernel: ret_from_fork+0x10/0x20 This patch proposes a fixed that's based on adding 2 new additional stid's sc_status values that help coordinate between the laundromat and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()). First to make sure, that once the stid is marked revoked, it is not removed by the nfsd4_free_stateid(), the laundromat take a reference on the stateid. Then, coordinating whether the stid has been put on the cl_revoked list or we are processing FREE_STATEID and need to make sure to remove it from the list, each check that state and act accordingly. If laundromat has added to the cl_revoke list before the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove it from the list. If nfsd4_free_stateid() finds that operations arrived before laundromat has placed it on cl_revoke list, it marks the state freed and then laundromat will no longer add it to the list. Also, for nfsd4_delegreturn() when looking for the specified stid, we need to access stid that are marked removed or freeable, it means the laundromat has started processing it but hasn't finished and this delegreturn needs to return nfserr_deleg_revoked and not nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the lack of it will leave this stid on the cl_revoked list indefinitely. | 7.8 |
High |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc Commit 15c7fab0e047 ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards") moved the allocation of Soundwire stream runtime from the Qualcomm Soundwire driver to each individual machine sound card driver, except that it forgot to update SC7280 card. Just like for other Qualcomm sound cards using Soundwire, the card driver should allocate and release the runtime. Otherwise sound playback will result in a NULL pointer dereference or other effect of uninitialized memory accesses (which was confirmed on SDM845 having similar issue). | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: sdm845: add missing soundwire runtime stream alloc
During the migration of Soundwire runtime stream allocation from
the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845
soundcard was forgotten.
At this point any playback attempt or audio daemon startup, for instance
on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer
NULL dereference:
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000020
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: ...
CPU: 5 UID: 0 PID: 1198 Comm: aplay
Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty #18
Hardware name: Thundercomm Dragonboard 845c (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus]
lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus]
sp : ffff80008a2035c0
x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000
x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800
x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003
x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000
x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec
x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003
x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8
Call trace:
sdw_stream_add_slave+0x44/0x380 [soundwire_bus]
wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x]
snd_soc_dai_hw_params+0x3c/0xa4
__soc_pcm_hw_params+0x230/0x660
dpcm_be_dai_hw_params+0x1d0/0x3f8
dpcm_fe_dai_hw_params+0x98/0x268
snd_pcm_hw_params+0x124/0x460
snd_pcm_common_ioctl+0x998/0x16e8
snd_pcm_ioctl+0x34/0x58
__arm64_sys_ioctl+0xac/0xf8
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xe0
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: aa0403fb f9418400 9100e000 9400102f (f8420f22)
---[ end trace 0000000000000000 ]---
0000000000006108 |
5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe() A devm_kzalloc() in asoc_qcom_lpass_cpu_platform_probe() could possibly return NULL pointer. NULL Pointer Dereference may be triggerred without addtional check. Add a NULL check for the returned pointer. | 5.5 |
Medium |
|
17h10 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86: fix user address masking non-canonical speculation issue It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical accesses in kernel space. And so using just the high bit to decide whether an access is in user space or kernel space ends up with the good old "leak speculative data" if you have the right gadget using the result: CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“ Now, the kernel surrounds the access with a STAC/CLAC pair, and those instructions end up serializing execution on older Zen architectures, which closes the speculation window. But that was true only up until Zen 5, which renames the AC bit [1]. That improves performance of STAC/CLAC a lot, but also means that the speculation window is now open. Note that this affects not just the new address masking, but also the regular valid_user_address() check used by access_ok(), and the asm version of the sign bit check in the get_user() helpers. It does not affect put_user() or clear_user() variants, since there's no speculative result to be used in a gadget for those operations. | 5.5 |
Medium |
|
17h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices Previously, the domain_context_clear() function incorrectly called pci_for_each_dma_alias() to set up context entries for non-PCI devices. This could lead to kernel hangs or other unexpected behavior. Add a check to only call pci_for_each_dma_alias() for PCI devices. For non-PCI devices, domain_context_clear_one() is called directly. | 5.5 |
Medium |
|
17h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: USB: gadget: dummy-hcd: Fix "task hung" problem The syzbot fuzzer has been encountering "task hung" problems ever since the dummy-hcd driver was changed to use hrtimers instead of regular timers. It turns out that the problems are caused by a subtle difference between the timer_pending() and hrtimer_active() APIs. The changeover blindly replaced the first by the second. However, timer_pending() returns True when the timer is queued but not when its callback is running, whereas hrtimer_active() returns True when the hrtimer is queued _or_ its callback is running. This difference occasionally caused dummy_urb_enqueue() to think that the callback routine had not yet started when in fact it was almost finished. As a result the hrtimer was not restarted, which made it impossible for the driver to dequeue later the URB that was just enqueued. This caused usb_kill_urb() to hang, and things got worse from there. Since hrtimers have no API for telling when they are queued and the callback isn't running, the driver must keep track of this for itself. That's what this patch does, adding a new "timer_pending" flag and setting or clearing it at the appropriate times. | 5.5 |
Medium |
|
17h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Remove broken LDR (literal) uprobe support The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory. There are three key problems: 1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()). 2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN. 3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range. In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1). Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either: * Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range. * Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range. ... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers. Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes. Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR (literal) and LDRSW (literal) will be rejected as arm_probe_decode_insn() will return INSN_REJECTED. In future we can consider introducing working uprobes support for these instructions, but this will require more significant work. | 5.5 |
Medium |
|
17h07 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down There is a history of deadlock if reboot is performed at the beginning of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS shutdown, and at that time the audio driver was waiting on blk_mq_submit_bio() holding a mutex_lock while reading the fw binary. After that, a deadlock issue occurred while audio driver shutdown was waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down after a UFS shutdown will return an error. [ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown] [ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49] [ 31.907806]I[0: swapper/0: 0] Call trace: [ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40 [ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac [ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24 [ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec [ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280 [ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c [ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280 [ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158 [ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4 [ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0 [ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0 [ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4 [ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4 [ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter] [ 31.908783]I[0: swapper/0: 0] Call trace: [ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338 [ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc [ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8 [ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178 [ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c [ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c | 5.5 |
Medium |
|
17h04 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: fec: don't save PTP state if PTP is unsupported Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on these platforms fec_ptp_init() is not called and the related members in fep are not initialized. However, fec_ptp_save_state() is called unconditionally, which causes the kernel to panic. Therefore, add a condition so that fec_ptp_save_state() is not called if PTP is not supported. | 5.5 |
Medium |
|
17h04 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user. | 5.5 |
Medium |
|
17h04 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mad: Improve handling of timed out WRs of mad agent
Current timeout handler of mad agent acquires/releases mad_agent_priv
lock for every timed out WRs. This causes heavy locking contention
when higher no. of WRs are to be handled inside timeout handler.
This leads to softlockup with below trace in some use cases where
rdma-cm path is used to establish connection between peer nodes
Trace:
-----
BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767]
CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE
------- --- 5.14.0-427.13.1.el9_4.x86_64 #1
Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019
Workqueue: ib_mad1 timeout_sends [ib_core]
RIP: 0010:__do_softirq+0x78/0x2ac
RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246
RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f
RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b
RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000
R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040
FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
|
5.5 |
Medium |
|
17h04 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sfc: Don't invoke xdp_do_flush() from netpoll. Yury reported a crash in the sfc driver originated from netpoll_send_udp(). The netconsole sends a message and then netpoll invokes the driver's NAPI function with a budget of zero. It is dedicated to allow driver to free TX resources, that it may have used while sending the packet. In the netpoll case the driver invokes xdp_do_flush() unconditionally, leading to crash because bpf_net_context was never assigned. Invoke xdp_do_flush() only if budget is not zero. | 5.5 |
Medium |
|
17h04 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: int340x: processor: Fix warning during module unload
The processor_thermal driver uses pcim_device_enable() to enable a PCI
device, which means the device will be automatically disabled on driver
detach. Thus there is no need to call pci_disable_device() again on it.
With recent PCI device resource management improvements, e.g. commit
f748a07a0b64 ("PCI: Remove legacy pcim_release()"), this problem is
exposed and triggers the warining below.
[ 224.010735] proc_thermal_pci 0000:00:04.0: disabling already-disabled device
[ 224.010747] WARNING: CPU: 8 PID: 4442 at drivers/pci/pci.c:2250 pci_disable_device+0xe5/0x100
...
[ 224.010844] Call Trace:
[ 224.010845] |
5.5 |
Medium |
|
17h04 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: netconsole: fix wrong warning A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative. | 3.3 |
Low |
|
17h04 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dm vdo: don't refer to dedupe_context after releasing it Clear the dedupe_context pointer in a data_vio whenever ownership of the context is lost, so that vdo can't examine it accidentally. | 5.5 |
Medium |
|
17h04 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix overflow in oa batch buffer By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch buffer, this is not a problem if batch buffer is only used once but oa reuses the batch buffer for the same metric and at each call it appends a MI_BATCH_BUFFER_END, printing the warning below and then overflowing. [ 381.072016] ------------[ cut here ]------------ [ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed! platform: LUNARLAKE subplatform: 1 graphics: Xe2_LPG / Xe2_HPG 20.04 step B0 media: Xe2_LPM / Xe2_HPM 20.00 step B0 tile: 0 VRAM 0 B GT: 0 type 1 So here checking if batch buffer already have MI_BATCH_BUFFER_END if not append it. v2: - simply fix, suggestion from Ashutosh (cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a) | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free in add_inode_ref() The add_inode_ref() function does not initialize the "name" struct when it is declared. If any of the following calls to "read_one_inode() returns NULL, dir = read_one_inode(root, parent_objectid); if (!dir) { ret = -ENOENT; goto out; } inode = read_one_inode(root, inode_objectid); if (!inode) { ret = -EIO; goto out; } then "name.name" would be freed on "out" before being initialized. out: ... kfree(name.name); This issue was reported by Coverity with CID 1526744. | 7.8 |
High |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free on read_alloc_one_name() error The function read_alloc_one_name() does not initialize the name field of the passed fscrypt_str struct if kmalloc fails to allocate the corresponding buffer. Thus, it is not guaranteed that fscrypt_str.name is initialized when freeing it. This is a follow-up to the linked patch that fixes the remaining instances of the bug introduced by commit e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs"). | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix user-after-free from session log off There is racy issue between smb2 session log off and smb2 session setup. It will cause user-after-free from session log off. This add session_lock when setting SMB2_SESSION_EXPIRED and referece count to session struct not to free session while it is being used. | 7 |
High |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
Syzkaller reported this splat:
==================================================================
BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662
CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
|
7.8 |
High |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test() Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_de ---truncated--- | 7.8 |
High |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix mptcp DSS corruption due to large pmtu xmit
Syzkaller was able to trigger a DSS corruption:
TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Modules linked in:
CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff
RSP: 0018:ffffc90000006db8 EFLAGS: 00010246
RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00
RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0
RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8
R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000
R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5
FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
7.5 |
High |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 |
4.7 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: blk-mq: setup queue ->tag_set before initializing hctx Commit 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx") needs to check queue mapping via tag set in hctx's cpuhp handler. However, q->tag_set may not be setup yet when the cpuhp handler is enabled, then kernel oops is triggered. Fix the issue by setup queue tag_set before initializing hctx. | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ublk: don't allow user copy for unprivileged device UBLK_F_USER_COPY requires userspace to call write() on ublk char device for filling request buffer, and unprivileged device can't be trusted. So don't allow user copy for unprivileged device. | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: io_uring/sqpoll: ensure task state is TASK_RUNNING when running task_work When the sqpoll is exiting and cancels pending work items, it may need to run task_work. If this happens from within io_uring_cancel_generic(), then it may be under waiting for the io_uring_task waitqueue. This results in the below splat from the scheduler, as the ring mutex may be attempted grabbed while in a TASK_INTERRUPTIBLE state. Ensure that the task state is set appropriately for that, just like what is done for the other cases in io_run_task_work(). do not call blocking ops when !TASK_RUNNING; state=1 set at [<0000000029387fd2>] prepare_to_wait+0x88/0x2fc WARNING: CPU: 6 PID: 59939 at kernel/sched/core.c:8561 __might_sleep+0xf4/0x140 Modules linked in: CPU: 6 UID: 0 PID: 59939 Comm: iou-sqp-59938 Not tainted 6.12.0-rc3-00113-g8d020023b155 #7456 Hardware name: linux,dummy-virt (DT) pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __might_sleep+0xf4/0x140 lr : __might_sleep+0xf4/0x140 sp : ffff80008c5e7830 x29: ffff80008c5e7830 x28: ffff0000d93088c0 x27: ffff60001c2d7230 x26: dfff800000000000 x25: ffff0000e16b9180 x24: ffff80008c5e7a50 x23: 1ffff000118bcf4a x22: ffff0000e16b9180 x21: ffff0000e16b9180 x20: 000000000000011b x19: ffff80008310fac0 x18: 1ffff000118bcd90 x17: 30303c5b20746120 x16: 74657320313d6574 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: ffff600036c64f0b x11: 1fffe00036c64f0a x10: ffff600036c64f0a x9 : dfff800000000000 x8 : 00009fffc939b0f6 x7 : ffff0001b6327853 x6 : 0000000000000001 x5 : ffff0001b6327850 x4 : ffff600036c64f0b x3 : ffff8000803c35bc x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000e16b9180 Call trace: __might_sleep+0xf4/0x140 mutex_lock+0x84/0x124 io_handle_tw_list+0xf4/0x260 tctx_task_work_run+0x94/0x340 io_run_task_work+0x1ec/0x3c0 io_uring_cancel_generic+0x364/0x524 io_sq_thread+0x820/0x124c ret_from_fork+0x10/0x20 | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Call iso_exit() on module unload If iso_init() has been called, iso_exit() must be called on module unload. Without that, the struct proto that iso_init() registered with proto_register() becomes invalid, which could cause unpredictable problems later. In my case, with CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually triggers this BUG(): list_add corruption. next->prev should be prev (ffffffffb5355fd0), but was 0000000000000068. (next=ffffffffc0a010d0). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x61/0xa0 ... __list_add_valid_or_report+0x61/0xa0 proto_register+0x299/0x320 hci_sock_init+0x16/0xc0 [bluetooth] bt_init+0x68/0xd0 [bluetooth] __pfx_bt_init+0x10/0x10 [bluetooth] do_one_initcall+0x80/0x2f0 do_init_module+0x8b/0x230 __do_sys_init_module+0x15f/0x190 do_syscall_64+0x68/0x110 ... | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix multiple init when debugfs is disabled If bt_debugfs is not created successfully, which happens if either CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init() returns early and does not set iso_inited to true. This means that a subsequent call to iso_init() will result in duplicate calls to proto_register(), bt_sock_register(), etc. With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the duplicate call to proto_register() triggers this BUG(): list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250, next=ffffffffc0b280d0. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x9a/0xa0 ... __list_add_valid_or_report+0x9a/0xa0 proto_register+0x2b5/0x340 iso_init+0x23/0x150 [bluetooth] set_iso_socket_func+0x68/0x1b0 [bluetooth] kmem_cache_free+0x308/0x330 hci_sock_sendmsg+0x990/0x9e0 [bluetooth] __sock_sendmsg+0x7b/0x80 sock_write_iter+0x9a/0x110 do_iter_readv_writev+0x11d/0x220 vfs_writev+0x180/0x3e0 do_writev+0xca/0x100 ... This change removes the early return. The check for iso_debugfs being NULL was unnecessary, it is always NULL when iso_inited is false. | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vt: prevent kernel-infoleak in con_font_get() font.data may not initialize all memory spaces depending on the implementation of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it is safest to modify it to initialize the allocated memory space to 0, and it generally does not affect the overall performance of the system. | 6.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: xhci: tegra: fix checked USB2 port number If USB virtualizatoin is enabled, USB2 ports are shared between all Virtual Functions. The USB2 port number owned by an USB2 root hub in a Virtual Function may be less than total USB2 phy number supported by the Tegra XUSB controller. Using total USB2 phy number as port number to check all PORTSC values would cause invalid memory access. [ 116.923438] Unable to handle kernel paging request at virtual address 006c622f7665642f ... [ 117.213640] Call trace: [ 117.216783] tegra_xusb_enter_elpg+0x23c/0x658 [ 117.222021] tegra_xusb_runtime_suspend+0x40/0x68 [ 117.227260] pm_generic_runtime_suspend+0x30/0x50 [ 117.232847] __rpm_callback+0x84/0x3c0 [ 117.237038] rpm_suspend+0x2dc/0x740 [ 117.241229] pm_runtime_work+0xa0/0xb8 [ 117.245769] process_scheduled_works+0x24c/0x478 [ 117.251007] worker_thread+0x23c/0x328 [ 117.255547] kthread+0x104/0x1b0 [ 117.259389] ret_from_fork+0x10/0x20 [ 117.263582] Code: 54000222 f9461ae8 f8747908 b4ffff48 (f9400100) | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: parport: Proper fix for array out-of-bounds access The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly. | 7.8 |
High |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0
drivers/tty/n_gsm.c:3160 [n_gsm]
Read of size 8 at addr ffff88815fe99c00 by task poc/3379
CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56
Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
|
7.8 |
High |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Use code segment selector for VERW operand Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call: general protection fault: 0000 [#1] PREEMPT SMP CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1 Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010 EIP: restore_all_switch_stack+0xbe/0xcf EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0 Call Trace: show_regs+0x70/0x78 die_addr+0x29/0x70 exc_general_protection+0x13c/0x348 exc_bounds+0x98/0x98 handle_exception+0x14d/0x14d exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction: #GP(0) - If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds. [ mingo: Fixed the SOB chain. ] | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func() 'new_map' is allocated using devm_* which takes care of freeing the allocated data on device removal, call to .dt_free_map = pinconf_generic_dt_free_map double frees the map as pinconf_generic_dt_free_map() calls pinctrl_utils_free_map(). Fix this by using kcalloc() instead of auto-managed devm_kcalloc(). | 7.8 |
High |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pinctrl: stm32: check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: pinctrl: apple: check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. | 5.5 |
Medium |
|
00h50 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets() The sysfs_target->regions allocated in damon_sysfs_regions_alloc() is not freed in damon_sysfs_test_add_targets(), which cause the following memory leak, free it to fix it. unreferenced object 0xffffff80c2a8db80 (size 96): comm "kunit_try_catch", pid 187, jiffies 4294894363 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000008e6835c1>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000001286d9f8>] damon_sysfs_test_add_targets+0x1cc/0x738 [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 | 5.5 |
Medium |
|
00h57 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include |
7.8 |
High |
|
05h20 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix move_normal_pmd/retract_page_tables race In mremap(), move_page_tables() looks at the type of the PMD entry and the specified address range to figure out by which method the next chunk of page table entries should be moved. At that point, the mmap_lock is held in write mode, but no rmap locks are held yet. For PMD entries that point to page tables and are fully covered by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called, which first takes rmap locks, then does move_normal_pmd(). move_normal_pmd() takes the necessary page table locks at source and destination, then moves an entire page table from the source to the destination. The problem is: The rmap locks, which protect against concurrent page table removal by retract_page_tables() in the THP code, are only taken after the PMD entry has been read and it has been decided how to move it. So we can race as follows (with two processes that have mappings of the same tmpfs file that is stored on a tmpfs mount with huge=advise); note that process A accesses page tables through the MM while process B does it through the file rmap: process A process B ========= ========= mremap mremap_to move_vma move_page_tables get_old_pmd alloc_new_pmd *** PREEMPT *** madvise(MADV_COLLAPSE) do_madvise madvise_walk_vmas madvise_vma_behavior madvise_collapse hpage_collapse_scan_file collapse_file retract_page_tables i_mmap_lock_read(mapping) pmdp_collapse_flush i_mmap_unlock_read(mapping) move_pgt_entry(NORMAL_PMD, ...) take_rmap_locks move_normal_pmd drop_rmap_locks When this happens, move_normal_pmd() can end up creating bogus PMD entries in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`. The effect depends on arch-specific and machine-specific details; on x86, you can end up with physical page 0 mapped as a page table, which is likely exploitable for user->kernel privilege escalation. Fix the race by letting process B recheck that the PMD still points to a page table after the rmap locks have been taken. Otherwise, we bail and let the caller fall back to the PTE-level copying path, which will then bail immediately at the pmd_none() check. Bug reachability: Reaching this bug requires that you can create shmem/file THP mappings - anonymous THP uses different code that doesn't zap stuff under rmap locks. File THP is gated on an experimental config flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need shmem THP to hit this bug. As far as I know, getting shmem THP normally requires that you can mount your own tmpfs with the right mount flags, which would require creating your own user+mount namespace; though I don't know if some distros maybe enable shmem THP by default or something like that. Bug impact: This issue can likely be used for user->kernel privilege escalation when it is reachable. | 7 |
High |
|
20h05 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable_offload: fix using __this_cpu_add in preemptible
flow_offload_queue_work() can be called in workqueue without
bh disabled, like the call trace showed in my act_ct testing,
calling NF_FLOW_TABLE_STAT_INC() there would cause a call
trace:
BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u4:0/138560
caller is flow_offload_queue_work+0xec/0x1b0 [nf_flow_table]
Workqueue: act_ct_workqueue tcf_ct_flow_table_cleanup_work [act_ct]
Call Trace:
|
5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ntfs3: Change to non-blocking allocation in ntfs_d_hash d_hash is done while under "rcu-walk" and should not sleep. __get_name() allocates using GFP_KERNEL, having the possibility to sleep when under memory pressure. Change the allocation to GFP_NOWAIT. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: zram: free secondary algorithms names We need to kfree() secondary algorithms names when reset zram device that had multi-streams, otherwise we leak memory. [[email protected]: kfree(NULL) is legal] Link: https://lkml.kernel.org/r/[email protected] | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent tail call between progs attached to different hooks bpf progs can be attached to kernel functions, and the attached functions can take different parameters or return different return values. If prog attached to one kernel function tail calls prog attached to another kernel function, the ctx access or return value verification could be bypassed. For example, if prog1 is attached to func1 which takes only 1 parameter and prog2 is attached to func2 which takes two parameters. Since verifier assumes the bpf ctx passed to prog2 is constructed based on func2's prototype, verifier allows prog2 to access the second parameter from the bpf ctx passed to it. The problem is that verifier does not prevent prog1 from passing its bpf ctx to prog2 via tail call. In this case, the bpf ctx passed to prog2 is constructed from func1 instead of func2, that is, the assumption for ctx access verification is bypassed. Another example, if BPF LSM prog1 is attached to hook file_alloc_security, and BPF LSM prog2 is attached to hook bpf_lsm_audit_rule_known. Verifier knows the return value rules for these two hooks, e.g. it is legal for bpf_lsm_audit_rule_known to return positive number 1, and it is illegal for file_alloc_security to return positive number. So verifier allows prog2 to return positive number 1, but does not allow prog1 to return positive number. The problem is that verifier does not prevent prog1 from calling prog2 via tail call. In this case, prog2's return value 1 will be used as the return value for prog1's hook file_alloc_security. That is, the return value rule is bypassed. This patch adds restriction for tail call to prevent such bypasses. | 7.8 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Avoid null pointer deref during path establishment For RTRS path establishment, RTRS client initiates and completes con_num of connections. After establishing all its connections, the information is exchanged between the client and server through the info_req message. During this exchange, it is essential that all connections have been established, and the state of the RTRS srv path is CONNECTED. So add these sanity checks, to make sure we detect and abort process in error scenarios to avoid null pointer deref. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition In the cdns_i3c_master_probe function, &master->hj_work is bound with cdns_i3c_master_hj. And cdns_i3c_master_interrupt can call cnds_i3c_master_demux_ibis function to start the work. If we remove the module which will call cdns_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | cdns_i3c_master_hj cdns_i3c_master_remove | i3c_master_unregister(&master->base) | device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in cdns_i3c_master_remove. | 7 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: io_uring: check if we need to reschedule during overflow flush In terms of normal application usage, this list will always be empty. And if an application does overflow a bit, it'll have a few entries. However, nothing obviously prevents syzbot from running a test case that generates a ton of overflow entries, and then flushing them can take quite a while. Check for needing to reschedule while flushing, and drop our locks and do so if necessary. There's no state to maintain here as overflows always prune from head-of-list, hence it's fine to drop and reacquire the locks at the end of the loop. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove. | 7 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: serial: protect uart_port_dtr_rts() in uart_shutdown() too Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part 3) added few uport == NULL checks. It added one to uart_shutdown(), so the commit assumes, uport can be NULL in there. But right after that protection, there is an unprotected "uart_port_dtr_rts(uport, false);" call. That is invoked only if HUPCL is set, so I assume that is the reason why we do not see lots of these reports. Or it cannot be NULL at this point at all for some reason :P. Until the above is investigated, stay on the safe side and move this dereference to the if too. I got this inconsistency from Coverity under CID 1585130. Thanks. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Free IRQ only if it was requested before In polling mode, if no IRQ was requested there is no need to free it. Call devm_free_irq() only if client->irq is set. This fixes the warning caused by the tps6598x module removal: WARNING: CPU: 2 PID: 333 at kernel/irq/devres.c:144 devm_free_irq+0x80/0x8c ... ... Call trace: devm_free_irq+0x80/0x8c tps6598x_remove+0x28/0x88 [tps6598x] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 tps6598x_i2c_driver_exit+0x18/0xc3c [tps6598x] __arm64_sys_delete_module+0x184/0x264 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc8/0xe8 do_el0_svc+0x20/0x2c el0_svc+0x28/0x98 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 | 3.3 |
Low |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix ERR_PTR dereference in uvc_v4l2.c Fix potential dereferencing of ERR_PTR() in find_format_by_pix() and uvc_v4l2_enum_format(). Fix the following smatch errors: drivers/usb/gadget/function/uvc_v4l2.c:124 find_format_by_pix() error: 'fmtdesc' dereferencing possible ERR_PTR() drivers/usb/gadget/function/uvc_v4l2.c:392 uvc_v4l2_enum_format() error: 'fmtdesc' dereferencing possible ERR_PTR() Also, fix similar issue in uvc_v4l2_try_format() for potential dereferencing of ERR_PTR(). | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: driver core: bus: Fix double free in driver API bus_register() For bus_register(), any error which happens after kset_register() will cause that @priv are freed twice, fixed by setting @priv with NULL after the first free. | 7.8 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before dereferencing se [WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fbcon: Fix a NULL pointer dereference issue in fbcon_putcs syzbot has found a NULL pointer dereference bug in fbcon. Here is the simplified C reproducer: struct param { uint8_t type; struct tiocl_selection ts; }; int main() { struct fb_con2fbmap con2fb; struct param param; int fd = open("/dev/fb1", 0, 0); con2fb.console = 0x19; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); param.type = 2; param.ts.xs = 0; param.ts.ys = 0; param.ts.xe = 0; param.ts.ye = 0; param.ts.sel_mode = 0; int fd1 = open("/dev/tty1", O_RDWR, 0); ioctl(fd1, TIOCLINUX, ¶m); con2fb.console = 1; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); return 0; } After calling ioctl(fd1, TIOCLINUX, ¶m), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb) causes the kernel to follow a different execution path: set_con2fb_map -> con2fb_init_display -> fbcon_set_disp -> redraw_screen -> hide_cursor -> clear_selection -> highlight -> invert_screen -> do_update_region -> fbcon_putcs -> ops->putcs Since ops->putcs is a NULL pointer, this leads to a kernel panic. To prevent this, we need to call set_blitting_type() within set_con2fb_map() to properly initialize ops->putcs. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF in async decryption
Doing an async decryption (large read) crashes with a
slab-use-after-free way down in the crypto API.
Reproducer:
# mount.cifs -o ...,seal,esize=1 //srv/share /mnt
# dd if=/mnt/largefile of=/dev/null
...
[ 194.196391] ==================================================================
[ 194.196844] BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xc1/0x110
[ 194.197269] Read of size 8 at addr ffff888112bd0448 by task kworker/u77:2/899
[ 194.197707]
[ 194.197818] CPU: 12 UID: 0 PID: 899 Comm: kworker/u77:2 Not tainted 6.11.0-lku-00028-gfca3ca14a17a-dirty #43
[ 194.198400] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014
[ 194.199046] Workqueue: smb3decryptd smb2_decrypt_offload [cifs]
[ 194.200032] Call Trace:
[ 194.200191] |
7.8 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies() On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 00000000000000 ---truncated--- | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: fix panic with metadata_dst skb Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303 ---truncated--- | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change rfcomm_sk_state_change attempts to use sock_lock so it must never be called with it locked but rfcomm_sock_ioctl always attempt to lock it causing the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted ------------------------------------------------------ syz-executor386/5093 is trying to acquire lock: ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline] ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73 but task is already holding lock: ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491 | 3.3 |
Low |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfsd: fix possible badness in FREE_STATEID When multiple FREE_STATEIDs are sent for the same delegation stateid, it can lead to a possible either use-after-free or counter refcount underflow errors. In nfsd4_free_stateid() under the client lock we find a delegation stateid, however the code drops the lock before calling nfs4_put_stid(), that allows another FREE_STATE to find the stateid again. The first one will proceed to then free the stateid which leads to either use-after-free or decrementing already zeroed counter. | 7.8 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ice: Fix increasing MSI-X on VF Increasing MSI-X value on a VF leads to invalid memory operations. This is caused by not reallocating some arrays. Reproducer: modprobe ice echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count Default MSI-X is 16, so 17 and above triggers this issue. KASAN reports: BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] Read of size 8 at addr ffff8888b937d180 by task bash/28433 (...) Call Trace: (...) ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] kasan_report+0xed/0x120 ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_cfg_def+0x3360/0x4770 [ice] ? mutex_unlock+0x83/0xd0 ? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice] ? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vf_reconfig_vsi+0x114/0x210 [ice] ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice] sriov_vf_msix_count_store+0x21c/0x300 (...) Allocated by task 28201: (...) ice_vsi_cfg_def+0x1c8e/0x4770 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vsi_setup+0x179/0xa30 [ice] ice_sriov_configure+0xcaa/0x1520 [ice] sriov_numvfs_store+0x212/0x390 (...) To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This causes the required arrays to be reallocated taking the new queue count into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq before ice_vsi_rebuild(), so that realloc uses the newly set queue count. Additionally, ice_vsi_rebuild() does not remove VSI filters (ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer necessary. | 7.1 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i40e: Fix macvlan leak by synchronizing access to mac_filter_hash This patch addresses a macvlan leak issue in the i40e driver caused by concurrent access to vsi->mac_filter_hash. The leak occurs when multiple threads attempt to modify the mac_filter_hash simultaneously, leading to inconsistent state and potential memory leaks. To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock), ensuring atomic operations and preventing concurrent access. Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in i40e_add_mac_filter() to help catch similar issues in the future. Reproduction steps: 1. Spawn VFs and configure port vlan on them. 2. Trigger concurrent macvlan operations (e.g., adding and deleting portvlan and/or mac filters). 3. Observe the potential memory leak and inconsistent state in the mac_filter_hash. This synchronization ensures the integrity of the mac_filter_hash and prevents the described leak. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
igb: Do not bring the device up after non-fatal error
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
changed igb_io_error_detected() to ignore non-fatal pcie errors in order
to avoid hung task that can happen when igb_down() is called multiple
times. This caused an issue when processing transient non-fatal errors.
igb_io_resume(), which is called after igb_io_error_detected(), assumes
that device is brought down by igb_io_error_detected() if the interface
is up. This resulted in panic with stacktrace below.
[ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down
[ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0
[ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
[ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000
[ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000
[ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message
[ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported.
[ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message
[ T292] pcieport 0000:00:1c.5: AER: broadcast resume message
[ T292] ------------[ cut here ]------------
[ T292] kernel BUG at net/core/dev.c:6539!
[ T292] invalid opcode: 0000 [#1] PREEMPT SMP
[ T292] RIP: 0010:napi_enable+0x37/0x40
[ T292] Call Trace:
[ T292] |
5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/sched: accept TCA_STAB only for root qdisc
Most qdiscs maintain their backlog using qdisc_pkt_len(skb)
on the assumption it is invariant between the enqueue()
and dequeue() handlers.
Unfortunately syzbot can crash a host rather easily using
a TBF + SFQ combination, with an STAB on SFQ [1]
We can't support TCA_STAB on arbitrary level, this would
require to maintain per-qdisc storage.
[1]
[ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 88.798611] #PF: supervisor read access in kernel mode
[ 88.799014] #PF: error_code(0x0000) - not-present page
[ 88.799506] PGD 0 P4D 0
[ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI
[ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117
[ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq
[ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00
All code
========
0: 0f b7 50 12 movzwl 0x12(%rax),%edx
4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax
b: 00
c: 48 89 d6 mov %rdx,%rsi
f: 48 29 d0 sub %rdx,%rax
12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx
19: 48 c1 e0 03 shl $0x3,%rax
1d: 48 01 c2 add %rax,%rdx
20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx)
25: 7e c0 jle 0xffffffffffffffe7
27: 48 8b 3a mov (%rdx),%rdi
2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction
2d: 4c 89 02 mov %r8,(%rdx)
30: 49 89 50 08 mov %rdx,0x8(%r8)
34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi)
3b: 00
3c: 48 rex.W
3d: c7 .byte 0xc7
3e: 07 (bad)
...
Code starting with the faulting instruction
===========================================
0: 4c 8b 07 mov (%rdi),%r8
3: 4c 89 02 mov %r8,(%rdx)
6: 49 89 50 08 mov %rdx,0x8(%r8)
a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi)
11: 00
12: 48 rex.W
13: c7 .byte 0xc7
14: 07 (bad)
...
[ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206
[ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800
[ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000
[ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f
[ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140
[ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac
[ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000
[ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0
[ 88.808165] Call Trace:
[ 88.808459] |
5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: avoid NFPROTO_UNSPEC where needed syzbot managed to call xt_cluster match via ebtables: WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780 [..] ebt_do_table+0x174b/0x2a40 Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet processing. As this is only useful to restrict locally terminating TCP/UDP traffic, register this for ipv4 and ipv6 family only. Pablo points out that this is a general issue, direct users of the set/getsockopt interface can call into targets/matches that were only intended for use with ip(6)tables. Check all UNSPEC matches and targets for similar issues: - matches and targets are fine except if they assume skb_network_header() is valid -- this is only true when called from inet layer: ip(6) stack pulls the ip/ipv6 header into linear data area. - targets that return XT_CONTINUE or other xtables verdicts must be restricted too, they are incompatbile with the ebtables traverser, e.g. EBT_CONTINUE is a completely different value than XT_CONTINUE. Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as they are provided for use by ip(6)tables. The MARK target is also used by arptables, so register for NFPROTO_ARP too. While at it, bail out if connbytes fails to enable the corresponding conntrack family. This change passes the selftests in iptables.git. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Only cleanup deferred I/O if necessary Commit 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") initializes deferred I/O only if it is used. drm_fbdev_dma_fb_destroy() however calls fb_deferred_io_cleanup() unconditionally with struct fb_info.fbdefio == NULL. KASAN with the out-of-tree Apple silicon display driver posts following warning from __flush_work() of a random struct work_struct instead of the expected NULL pointer derefs. [ 22.053799] ------------[ cut here ]------------ [ 22.054832] WARNING: CPU: 2 PID: 1 at kernel/workqueue.c:4177 __flush_work+0x4d8/0x580 [ 22.056597] Modules linked in: uhid bnep uinput nls_ascii ip6_tables ip_tables i2c_dev loop fuse dm_multipath nfnetlink zram hid_magicmouse btrfs xor xor_neon brcmfmac_wcc raid6_pq hci_bcm4377 bluetooth brcmfmac hid_apple brcmutil nvmem_spmi_mfd simple_mfd_spmi dockchannel_hid cfg80211 joydev regmap_spmi nvme_apple ecdh_generic ecc macsmc_hid rfkill dwc3 appledrm snd_soc_macaudio macsmc_power nvme_core apple_isp phy_apple_atc apple_sart apple_rtkit_helper apple_dockchannel tps6598x macsmc_hwmon snd_soc_cs42l84 videobuf2_v4l2 spmi_apple_controller nvmem_apple_efuses videobuf2_dma_sg apple_z2 videobuf2_memops spi_nor panel_summit videobuf2_common asahi videodev pwm_apple apple_dcp snd_soc_apple_mca apple_admac spi_apple clk_apple_nco i2c_pasemi_platform snd_pcm_dmaengine mc i2c_pasemi_core mux_core ofpart adpdrm drm_dma_helper apple_dart apple_soc_cpufreq leds_pwm phram [ 22.073768] CPU: 2 UID: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.11.2-asahi+ #asahi-dev [ 22.075612] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT) [ 22.077032] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 22.078567] pc : __flush_work+0x4d8/0x580 [ 22.079471] lr : __flush_work+0x54/0x580 [ 22.080345] sp : ffffc000836ef820 [ 22.081089] x29: ffffc000836ef880 x28: 0000000000000000 x27: ffff80002ddb7128 [ 22.082678] x26: dfffc00000000000 x25: 1ffff000096f0c57 x24: ffffc00082d3e358 [ 22.084263] x23: ffff80004b7862b8 x22: dfffc00000000000 x21: ffff80005aa1d470 [ 22.085855] x20: ffff80004b786000 x19: ffff80004b7862a0 x18: 0000000000000000 [ 22.087439] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000005 [ 22.089030] x14: 1ffff800106ddf0a x13: 0000000000000000 x12: 0000000000000000 [ 22.090618] x11: ffffb800106ddf0f x10: dfffc00000000000 x9 : 1ffff800106ddf0e [ 22.092206] x8 : 0000000000000000 x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000001 [ 22.093790] x5 : ffffc000836ef728 x4 : 0000000000000000 x3 : 0000000000000020 [ 22.095368] x2 : 0000000000000008 x1 : 00000000000000aa x0 : 0000000000000000 [ 22.096955] Call trace: [ 22.097505] __flush_work+0x4d8/0x580 [ 22.098330] flush_delayed_work+0x80/0xb8 [ 22.099231] fb_deferred_io_cleanup+0x3c/0x130 [ 22.100217] drm_fbdev_dma_fb_destroy+0x6c/0xe0 [drm_dma_helper] [ 22.101559] unregister_framebuffer+0x210/0x2f0 [ 22.102575] drm_fb_helper_unregister_info+0x48/0x60 [ 22.103683] drm_fbdev_dma_client_unregister+0x4c/0x80 [drm_dma_helper] [ 22.105147] drm_client_dev_unregister+0x1cc/0x230 [ 22.106217] drm_dev_unregister+0x58/0x570 [ 22.107125] apple_drm_unbind+0x50/0x98 [appledrm] [ 22.108199] component_del+0x1f8/0x3a8 [ 22.109042] dcp_platform_shutdown+0x24/0x38 [apple_dcp] [ 22.110357] platform_shutdown+0x70/0x90 [ 22.111219] device_shutdown+0x368/0x4d8 [ 22.112095] kernel_restart+0x6c/0x1d0 [ 22.112946] __arm64_sys_reboot+0x1c8/0x328 [ 22.113868] invoke_syscall+0x78/0x1a8 [ 22.114703] do_el0_svc+0x124/0x1a0 [ 22.115498] el0_svc+0x3c/0xe0 [ 22.116181] el0t_64_sync_handler+0x70/0xc0 [ 22.117110] el0t_64_sync+0x190/0x198 [ 22.117931] ---[ end trace 0000000000000000 ]--- | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: do not delay dst_entries_add() in dst_release() dst_entries_add() uses per-cpu data that might be freed at netns dismantle from ip6_route_net_exit() calling dst_entries_destroy() Before ip6_route_net_exit() can be called, we release all the dsts associated with this netns, via calls to dst_release(), which waits an rcu grace period before calling dst_destroy() dst_entries_add() use in dst_destroy() is racy, because dst_entries_destroy() could have been called already. Decrementing the number of dsts must happen sooner. Notes: 1) in CONFIG_XFRM case, dst_destroy() can call dst_release_immediate(child), this might also cause UAF if the child does not have DST_NOCOUNT set. IPSEC maintainers might take a look and see how to address this. 2) There is also discussion about removing this count of dst, which might happen in future kernels. | 7 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ppp: fix ppp_async_encode() illegal access syzbot reported an issue in ppp_async_encode() [1] In this case, pppoe_sendmsg() is called with a zero size. Then ppp_async_encode() is called with an empty skb. BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline] ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4092 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 | 7.1 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC Eric report a panic on IPPROTO_SMC, and give the facts that when INET_PROTOSW_ICSK was set, icsk->icsk_sync_mss must be set too. Bug: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000005 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000001195d1000 [0000000000000000] pgd=0800000109c46003, p4d=0800000109c46003, pud=0000000000000000 Internal error: Oops: 0000000086000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 UID: 0 PID: 8037 Comm: syz.3.265 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : cipso_v4_sock_setattr+0x2a8/0x3c0 net/ipv4/cipso_ipv4.c:1910 sp : ffff80009b887a90 x29: ffff80009b887aa0 x28: ffff80008db94050 x27: 0000000000000000 x26: 1fffe0001aa6f5b3 x25: dfff800000000000 x24: ffff0000db75da00 x23: 0000000000000000 x22: ffff0000d8b78518 x21: 0000000000000000 x20: ffff0000d537ad80 x19: ffff0000d8b78000 x18: 1fffe000366d79ee x17: ffff8000800614a8 x16: ffff800080569b84 x15: 0000000000000001 x14: 000000008b336894 x13: 00000000cd96feaa x12: 0000000000000003 x11: 0000000000040000 x10: 00000000000020a3 x9 : 1fffe0001b16f0f1 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000002 x1 : 0000000000000000 x0 : ffff0000d8b78000 Call trace: 0x0 netlbl_sock_setattr+0x2e4/0x338 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa4/0x154 security/smack/smack_lsm.c:2593 smack_socket_post_create+0xa8/0x14c security/smack/smack_lsm.c:2973 security_socket_post_create+0x94/0xd4 security/security.c:4425 __sock_create+0x4c8/0x884 net/socket.c:1587 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x134/0x340 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __arm64_sys_socket+0x7c/0x94 net/socket.c:1718 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- This patch add a toy implementation that performs a simple return to prevent such panic. This is because MSS can be set in sock_create_kern or smc_setsockopt, similar to how it's done in AF_SMC. However, for AF_SMC, there is currently no way to synchronize MSS within __sys_connect_file. This toy implementation lays the groundwork for us to support such feature for IPPROTO_SMC in the future. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: slip: make slhc_remember() more robust against malicious packets syzbot found that slhc_remember() was missing checks against malicious packets [1]. slhc_remember() only checked the size of the packet was at least 20, which is not good enough. We need to make sure the packet includes the IPv4 and TCP header that are supposed to be carried. Add iph and th pointers to make the code more readable. [1] BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455 ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline] ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212 ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 | 7.1 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop the active perfmon before being destroyed When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/ct: prevent UAF in send_recv() Ensure we serialize with completion side to prevent UAF with fence going out of scope on the stack, since we have no clue if it will fire after the timeout before we can erase from the xa. Also we have some dependent loads and stores for which we need the correct ordering, and we lack the needed barriers. Fix this by grabbing the ct->lock after the wait, which is also held by the completion side. v2 (Badal): - Also print done after acquiring the lock and seeing timeout. (cherry picked from commit 52789ce35c55ccd30c4b67b9cc5b2af55e0122ea) | 7.8 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync
This checks if the ACL connection remains valid as it could be destroyed
while hci_enhanced_setup_sync is pending on cmd_sync leading to the
following trace:
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60
Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37
CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
|
7.8 |
High |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: thermal: core: Reference count the zone in thermal_zone_get_by_id() There are places in the thermal netlink code where nothing prevents the thermal zone object from going away while being accessed after it has been returned by thermal_zone_get_by_id(). To address this, make thermal_zone_get_by_id() get a reference on the thermal zone device object to be returned with the help of get_device(), under thermal_list_lock, and adjust all of its callers to this change with the help of the cleanup.h infrastructure. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: thermal: core: Free tzp copy along with the thermal zone The object pointed to by tz->tzp may still be accessed after being freed in thermal_zone_device_unregister(), so move the freeing of it to the point after the removal completion has been completed at which it cannot be accessed any more. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: wd33c93: Don't use stale scsi_pointer value A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data") which results in an oops in wd33c93_intr(). That commit added the scsi_pointer variable and initialized it from hostdata->connected. However, during selection, hostdata->connected is not yet valid. Fix this by getting the current scsi_pointer from hostdata->selecting. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Move flush_work initialization out of if block
After commit 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a
work queue"), it can happen that a work item is sent to an uninitialized
work queue. This may has the effect that the item being queued is never
actually queued, and any further actions depending on it will not
proceed.
The following warning is observed while the fnic driver is loaded:
kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410
kernel: |
5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: Fix an unsafe loop on the list The kernel may crash when deleting a genetlink family if there are still listeners for that family: Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0 LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0 Call Trace: __netlink_clear_multicast_users+0x74/0xc0 genl_unregister_family+0xd4/0x2d0 Change the unsafe loop on the list to a safe one, because inside the loop there is an element removal from this list. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: phy: Remove LED entry from LEDs list on unregister Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering") correctly fixed a problem with using devm_ but missed removing the LED entry from the LEDs list. This cause kernel panic on specific scenario where the port for the PHY is torn down and up and the kmod for the PHY is removed. On setting the port down the first time, the assosiacted LEDs are correctly unregistered. The associated kmod for the PHY is now removed. The kmod is now added again and the port is now put up, the associated LED are registered again. On putting the port down again for the second time after these step, the LED list now have 4 elements. With the first 2 already unregistered previously and the 2 new one registered again. This cause a kernel panic as the first 2 element should have been removed. Fix this by correctly removing the element when LED is unregistered. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: device-dax: correct pgoff align in dax_set_mapping() pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise, vmf->address not aligned to fault_size will be aligned to the next alignment, that can result in memory failure getting the wrong address. It's a subtle situation that only can be observed in page_mapped_in_vma() after the page is page fault handled by dev_dax_huge_fault. Generally, there is little chance to perform page_mapped_in_vma in dev-dax's page unless in specific error injection to the dax device to trigger an MCE - memory-failure. In that case, page_mapped_in_vma() will be triggered to determine which task is accessing the failure address and kill that task in the end. We used self-developed dax device (which is 2M aligned mapping) , to perform error injection to random address. It turned out that error injected to non-2M-aligned address was causing endless MCE until panic. Because page_mapped_in_vma() kept resulting wrong address and the task accessing the failure address was never killed properly: [ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.049006] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.448042] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.792026] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.162502] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.461116] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.764730] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.042128] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.464293] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.818090] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3787.085297] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page: Recovered It took us several weeks to pinpoint this problem, but we eventually used bpftrace to trace the page fault and mce address and successfully identified the issue. Joao added: ; Likely we never reproduce in production because we always pin : device-dax regions in the region align they provide (Qemu does : similarly with prealloc in hugetlb/file backed memory). I think this : bug requires that we touch *unpinned* device-dax regions unaligned to : the device-dax selected alignment (page size i.e. 4K/2M/1G) | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins() This patch addresses a reference count handling issue in the ice_dpll_init_rclk_pins() function. The function calls ice_dpll_get_pins(), which increments the reference count of the relevant resources. However, if the condition WARN_ON((!vsi || !vsi->netdev)) is met, the function currently returns an error without properly releasing the resources acquired by ice_dpll_get_pins(), leading to a reference count leak. To resolve this, the check has been moved to the top of the function. This ensures that the function verifies the state before any resources are acquired, avoiding the need for additional resource management in the error path. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and detecting potential issues where resources are not properly managed. In this case, the tool flagged the missing release operation as a potential problem, which led to the development of this patch. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count() This patch addresses an issue with improper reference count handling in the ice_sriov_set_msix_vec_count() function. First, the function calls ice_get_vf_by_id(), which increments the reference count of the vf pointer. If the subsequent call to ice_get_vf_vsi() fails, the function currently returns an error without decrementing the reference count of the vf pointer, leading to a reference count leak. The correct behavior, as implemented in this patch, is to decrement the reference count using ice_put_vf(vf) before returning an error when vsi is NULL. Second, the function calls ice_sriov_get_irqs(), which sets vf->first_vector_idx. If this call returns a negative value, indicating an error, the function returns an error without decrementing the reference count of the vf pointer, resulting in another reference count leak. The patch addresses this by adding a call to ice_put_vf(vf) before returning an error when vf->first_vector_idx < 0. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and identifying potential mismanagement of reference counts. In this case, the tool flagged the missing decrement operation as a potential issue, leading to this patch. | 5.5 |
Medium |
|
19h39 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
kthread: unpark only parked kthread
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
|
5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/mm/ident_map: Use gbpages only where full GB page should be mapped. When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts. Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. | 5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid overflow assignment in link_dp_cts sampling_rate is an uint8_t but is assigned an unsigned int, and thus it can overflow. As a result, sampling_rate is changed to uint32_t. Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should only be assigned to a value less or equal than 4. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. | 5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: dax: fix overflowing extents beyond inode size when partially writing The dax_iomap_rw() does two things in each iteration: map written blocks and copy user data to blocks. If the process is killed by user(See signal handling in dax_iomap_iter()), the copied data will be returned and added on inode size, which means that the length of written extents may exceed the inode size, then fsck will fail. An example is given as: dd if=/dev/urandom of=file bs=4M count=1 dax_iomap_rw iomap_iter // round 1 ext4_iomap_begin ext4_iomap_alloc // allocate 0~2M extents(written flag) dax_iomap_iter // copy 2M data iomap_iter // round 2 iomap_iter_advance iter->pos += iter->processed // iter->pos = 2M ext4_iomap_begin ext4_iomap_alloc // allocate 2~4M extents(written flag) dax_iomap_iter fatal_signal_pending done = iter->pos - iocb->ki_pos // done = 2M ext4_handle_inode_extension ext4_update_inode_size // inode size = 2M fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix? Fix the problem by truncating extents if the written length is smaller than expected. | 5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix access to uninitialised lock in fc replay path
The following kernel trace can be triggered with fstest generic/629 when
executed against a filesystem with fast-commit feature enabled:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014
Call Trace:
|
5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: exfat: fix memory leak in exfat_load_bitmap() If the first directory entry in the root directory is not a bitmap directory entry, 'bh' will not be released and reassigned, which will cause a memory leak. | 5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cpufreq: Avoid a bad reference count on CPU node In the parse_perf_domain function, if the call to of_parse_phandle_with_args returns an error, then the reference to the CPU device node that was acquired at the start of the function would not be properly decremented. Address this by declaring the variable with the __free(device_node) cleanup attribute. | 5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required. | 5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: exec: don't WARN for racy path_noexec check Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact of the previous implementation. They used to legitimately check for the condition, but that got moved up in two commits: 633fb6ac3980 ("exec: move S_ISREG() check earlier") 0fd338b2d2cd ("exec: move path_noexec() check earlier") Instead of being removed said checks are WARN_ON'ed instead, which has some debug value. However, the spurious path_noexec check is racy, resulting in unwarranted warnings should someone race with setting the noexec flag. One can note there is more to perm-checking whether execve is allowed and none of the conditions are guaranteed to still hold after they were tested for. Additionally this does not validate whether the code path did any perm checking to begin with -- it will pass if the inode happens to be regular. Keep the redundant path_noexec() check even though it's mindless nonsense checking for guarantee that isn't given so drop the WARN. Reword the commentary and do small tidy ups while here. [brauner: keep redundant path_noexec() check] | 4.7 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext() Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`. With this, fix the following warning: elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex] | 5.5 |
Medium |
|
18h54 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ALSA: asihpi: Fix potential OOB array access ASIHPI driver stores some values in the static array upon a response from the driver, and its index depends on the firmware. We shouldn't trust it blindly. This patch adds a sanity check of the array index to fit in the array size. | 7.8 |
High |
|
18h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_data_sem unlock order in ext4_ind_migrate() Fuzzing reports a possible deadlock in jbd2_log_wait_commit. This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require synchronous updates because the file descriptor is opened with O_SYNC. This can lead to the jbd2_journal_stop() function calling jbd2_might_wait_for_commit(), potentially causing a deadlock if the EXT4_IOC_MIGRATE call races with a write(2) system call. This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the jbd2_journal_stop function while i_data_sem is locked. This triggers lockdep because the jbd2_journal_start function might also lock the same jbd2_handle simultaneously. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Rule: add | 4.7 |
Medium |
|
18h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mac802154: Fix potential RCU dereference issue in mac802154_scan_worker In the `mac802154_scan_worker` function, the `scan_req->type` field was accessed after the RCU read-side critical section was unlocked. According to RCU usage rules, this is illegal and can lead to unpredictable behavior, such as accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the `scan_req->type` value is now stored in a local variable `scan_req_type` while still within the RCU read-side critical section. The `scan_req_type` is then used after the RCU lock is released, ensuring that the type value is safely accessed without violating RCU rules. | 7.8 |
High |
|
18h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35 [WHY & HOW] Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override to match HW spec. (cherry picked from commit 9dad21f910fcea2bdcff4af46159101d7f9cd8ba) | 5.5 |
Medium |
|
18h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix system hang while resume with TBT monitor [Why] Connected with a Thunderbolt monitor and do the suspend and the system may hang while resume. The TBT monitor HPD will be triggered during the resume procedure and call the drm_client_modeset_probe() while struct drm_connector connector->dev->master is NULL. It will mess up the pipe topology after resume. [How] Skip the TBT monitor HPD during the resume procedure because we currently will probe the connectors after resume by default. (cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85) | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: static_call: Handle module init failure correctly in static_call_del_module() Module insertion invokes static_call_add_module() to initialize the static calls in a module. static_call_add_module() invokes __static_call_init(), which allocates a struct static_call_mod to either encapsulate the built-in static call sites of the associated key into it so further modules can be added or to append the module to the module chain. If that allocation fails the function returns with an error code and the module core invokes static_call_del_module() to clean up eventually added static_call_mod entries. This works correctly, when all keys used by the module were converted over to a module chain before the failure. If not then static_call_del_module() causes a #GP as it blindly assumes that key::mods points to a valid struct static_call_mod. The problem is that key::mods is not a individual struct member of struct static_call_key, it's part of a union to save space: union { /* bit 0: 0 = mods, 1 = sites */ unsigned long type; struct static_call_mod *mods; struct static_call_site *sites; }; key::sites is a pointer to the list of built-in usage sites of the static call. The type of the pointer is differentiated by bit 0. A mods pointer has the bit clear, the sites pointer has the bit set. As static_call_del_module() blidly assumes that the pointer is a valid static_call_mod type, it fails to check for this failure case and dereferences the pointer to the list of built-in call sites, which is obviously bogus. Cure it by checking whether the key has a sites or a mods pointer. If it's a sites pointer then the key is not to be touched. As the sites are walked in the same order as in __static_call_init() the site walk can be terminated because all subsequent sites have not been touched by the init code due to the error exit. If it was converted before the allocation fail, then the inner loop which searches for a module match will find nothing. A fail in the second allocation in __static_call_init() is harmless and does not require special treatment. The first allocation succeeded and converted the key to a module chain. That first entry has mod::mod == NULL and mod::next == NULL, so the inner loop of static_call_del_module() will neither find a module match nor a module chain. The next site in the walk was either already converted, but can't match the module, or it will exit the outer loop because it has a static_call_site pointer and not a static_call_mod pointer. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix error path in multi-packet WQE transmit Remove the erroneous unmap in case no DMA mapping was established The multi-packet WQE transmit code attempts to obtain a DMA mapping for the skb. This could fail, e.g. under memory pressure, when the IOMMU driver just can't allocate more memory for page tables. While the code tries to handle this in the path below the err_unmap label it erroneously unmaps one entry from the sq's FIFO list of active mappings. Since the current map attempt failed this unmap is removing some random DMA mapping that might still be required. If the PCI function now presents that IOVA, the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI function in error state. The erroneous behavior was seen in a stress-test environment that created memory pressure. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc() In mlx5e_tir_builder_alloc() kvzalloc() may return NULL which is dereferenced on the next line in a reference to the modify field. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: afs: Fix the setting of the server responding flag In afs_wait_for_operation(), we set transcribe the call responded flag to the server record that we used after doing the fileserver iteration loop - but it's possible to exit the loop having had a response from the server that we've discarded (e.g. it returned an abort or we started receiving data, but the call didn't complete). This means that op->server might be NULL, but we don't check that before attempting to set the server flag. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: dsa: improve shutdown sequence Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata() But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD. The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid. Both problems have the common aspect that closing the conduit interface solves them. In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point. In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst: | Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands. So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit. The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them. The race condition actually did not exist when commit 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up). | 4.7 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: lantiq_etop: fix memory disclosure When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied. | 7.5 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: cifs: Fix buffer overflow when parsing NFS reparse points ReparseDataLength is sum of the InodeType size and DataBuffer size. So to get DataBuffer size it is needed to subtract InodeType's size from ReparseDataLength. Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer at position after the end of the buffer because it does not subtract InodeType size from the length. Fix this problem and correctly subtract variable len. Member InodeType is present only when reparse buffer is large enough. Check for ReparseDataLength before accessing InodeType to prevent another invalid memory access. Major and minor rdev values are present also only when reparse buffer is large enough. Check for reparse buffer size before calling reparse_mkdev(). | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tipc: guard against string buffer overrun Smatch reports that copying media_name and if_name to name_parts may overwrite the destination. .../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16) .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16) This does seem to be the case so guard against this possibility by using strscpy() and failing if truncation occurs. Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge") Compile tested only. | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: block: fix integer overflow in BLKSECDISCARD I independently rediscovered commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155 block: fix overflow in blk_ioctl_discard() but for secure erase. Same problem: uint64_t r[2] = {512, 18446744073709551104ULL}; ioctl(fd, BLKSECDISCARD, r); will enter near infinite loop inside blkdev_issue_secure_erase(): a.out: attempt to access beyond end of device loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048 bio_check_eod: 3286214 callbacks suppressed | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/stm: Avoid use-after-free issues with crtc and plane ltdc_load() calls functions drm_crtc_init_with_planes(), drm_universal_plane_init() and drm_encoder_init(). These functions should not be called with parameters allocated with devm_kzalloc() to avoid use-after-free issues [1]. Use allocations managed by the DRM framework. Found by Linux Verification Center (linuxtesting.org). [1] https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/ | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer Pass pointer reference to amdgpu_bo_unref to clear the correct pointer, otherwise amdgpu_bo_unref clear the local variable, the original pointer not set to NULL, this could cause use-after-free bug. | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/hdcp: Check GSC structure validity Sometimes xe_gsc is not initialized when checked at HDCP capability check. Add gsc structure check to avoid null pointer error. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix double free issue during amdgpu module unload
Flexible endpoints use DIGs from available inflexible endpoints,
so only the encoders of inflexible links need to be freed.
Otherwise, a double free issue may occur when unloading the
amdgpu module.
[ 279.190523] RIP: 0010:__slab_free+0x152/0x2f0
[ 279.190577] Call Trace:
[ 279.190580] |
7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ksmbd: add refcnt to ksmbd_conn struct When sending an oplock break request, opinfo->conn is used, But freed ->conn can be used on multichannel. This patch add a reference count to the ksmbd_conn struct so that it can be freed when it is no longer used. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpftool: Fix undefined behavior in qsort(NULL, 0, ...) When netfilter has no entry to display, qsort is called with qsort(NULL, 0, ...). This results in undefined behavior, as UBSan reports: net.c:827:2: runtime error: null pointer passed as argument 1, which is declared to never be null Although the C standard does not explicitly state whether calling qsort with a NULL pointer when the size is 0 constitutes undefined behavior, Section 7.1.4 of the C standard (Use of library functions) mentions: "Each of the following statements applies unless explicitly stated otherwise in the detailed descriptions that follow: If an argument to a function has an invalid value (such as a value outside the domain of the function, or a pointer outside the address space of the program, or a null pointer, or a pointer to non-modifiable storage when the corresponding parameter is not const-qualified) or a type (after promotion) not expected by a function with variable number of arguments, the behavior is undefined." To avoid this, add an early return when nf_link_info is NULL to prevent calling qsort with a NULL pointer. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors x86_android_tablet_remove() frees the pdevs[] array, so it should not be used after calling x86_android_tablet_remove(). When platform_device_register() fails, store the pdevs[x] PTR_ERR() value into the local ret variable before calling x86_android_tablet_remove() to avoid using pdevs[] after it has been freed. | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume In case there is any sort of clock controller attached to this I2C bus controller, for example Versaclock or even an AIC32x4 I2C codec, then an I2C transfer triggered from the clock controller clk_ops .prepare callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex. This is because the clock controller first grabs the prepare_lock mutex and then performs the prepare operation, including its I2C access. The I2C access resumes this I2C bus controller via .runtime_resume callback, which calls clk_prepare_enable(), which attempts to grab the prepare_lock mutex again and deadlocks. Since the clock are already prepared since probe() and unprepared in remove(), use simple clk_enable()/clk_disable() calls to enable and disable the clock on runtime suspend and resume, to avoid hitting the prepare_lock mutex. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Prevent out of bounds access in performance query extensions Check that the number of perfmons userspace is passing in the copy and reset extensions is not greater than the internal kernel storage where the ids will be copied into. | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(), the 'ppath' is updated but it is the 'path' that is freed, thus potentially triggering a double-free in the following process: ext4_ext_replay_update_ex ppath = path ext4_force_split_extent_at(&ppath) ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path) ---> path First freed *orig_path = path = NULL ---> null ppath kfree(path) ---> path double-free !!! So drop the unnecessary ppath and use path directly to avoid this problem. And use ext4_find_extent() directly to update path, avoiding unnecessary memory allocation and freeing. Also, propagate the error returned by ext4_find_extent() instead of using strange error codes. | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free bug in venus_remove due to race condition in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. | 7 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
This reverts commit 504fc6f4f7f681d2a03aa5f68aad549d90eab853.
dev_queue_xmit_nit is expected to be called with BH disabled.
__dev_queue_xmit has the following:
/* Disable soft irqs for various locks below. Also
* stops preemption for RCU.
*/
rcu_read_lock_bh();
VRF must follow this invariant. The referenced commit removed this
protection. Which triggered a lockdep warning:
================================
WARNING: inconsistent lock state
6.11.0 #1 Tainted: G W
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x19a/0x4f0
_raw_spin_lock+0x27/0x40
packet_rcv+0xa33/0x1320
__netif_receive_skb_core.constprop.0+0xcb0/0x3a90
__netif_receive_skb_list_core+0x2c9/0x890
netif_receive_skb_list_internal+0x610/0xcc0
[...]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(rlock-AF_PACKET);
|
5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: gso: fix tcp fraglist segmentation after pull from frag_list Detect tcp gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For TCP, this causes a NULL ptr deref in __tcpv4_gso_segment_list_csum at tcp_hdr(seg->next). Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. Approach and description based on a patch by Willem de Bruijn. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gso: fix udp gso fraglist segmentation after pull from frag_list Detect gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For UDP, this causes a NULL ptr deref in __udpv4_gso_segment_list_csum at udp_hdr(seg->next)->dest. Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix zero-division error when disabling tc cbs The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled") allows the "port_transmit_rate_kbps" to be set to a value of 0, which is then passed to the "div_s64" function when tc-cbs is disabled. This leads to a zero-division error. When tc-cbs is disabled, the idleslope, sendslope, and credit values the credit values are not required to be configured. Therefore, adding a return statement after setting the txQ mode to DCB when tc-cbs is disabled would prevent a zero-division error. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Drop interface_lock in stop_kthread() stop_kthread() is the offline callback for "trace/osnoise:online", since commit 5bfbcd1ee57b ("tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()"), the following ABBA deadlock scenario is introduced: T1 | T2 [BP] | T3 [AP] osnoise_hotplug_workfn() | work_for_cpu_fn() | cpuhp_thread_fun() | _cpu_down() | osnoise_cpu_die() mutex_lock(&interface_lock) | | stop_kthread() | cpus_write_lock() | mutex_lock(&interface_lock) cpus_read_lock() | cpuhp_kick_ap() | As the interface_lock here in just for protecting the "kthread" field of the osn_var, use xchg() instead to fix this issue. Also use for_each_online_cpu() back in stop_per_cpu_kthreads() as it can take cpu_read_lock() again. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: uprobes: fix kernel info leak via "[uprobes]" vma xol_add_vma() maps the uninitialized page allocated by __create_xol_area() into userspace. On some architectures (x86) this memory is readable even without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ, although this doesn't really matter, debugger can read this memory anyway. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: NFSD: Limit the number of concurrent async COPY operations Nothing appears to limit the number of concurrent async COPY operations that clients can start. In addition, AFAICT each async COPY can copy an unlimited number of 4MB chunks, so can run for a long time. Thus IMO async COPY can become a DoS vector. Add a restriction mechanism that bounds the number of concurrent background COPY operations. Start simple and try to be fair -- this patch implements a per-namespace limit. An async COPY request that occurs while this limit is exceeded gets NFS4ERR_DELAY. The requesting client can choose to send the request again after a delay or fall back to a traditional read/write style copy. If there is need to make the mechanism more sophisticated, we can visit that in future patches. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: r8169: add tally counter fields added with RTL8125 RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Deallocate DML memory if allocation fails [Why] When DC state create DML memory allocation fails, memory is not deallocated subsequently, resulting in uninitialized structure that is not NULL. [How] Deallocate memory if DML memory allocation fails. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Increase array size of dummy_boolean [WHY] dml2_core_shared_mode_support and dml_core_mode_support access the third element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when dummy_boolean has size of 2. Any assignment to hw_debug5 causes an OVERRUN. [HOW] Increase dummy_boolean's array size to 3. This fixes 2 OVERRUN issues reported by Coverity. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Implement bounds check for stream encoder creation in DCN401 'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn401_stream_encoder_create Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 color transformation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: filesystems without casefold feature cannot be mounted with siphash When mounting the ext4 filesystem, if the default hash version is set to DX_HASH_SIPHASH but the casefold feature is not set, exit the mounting. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel dqi_sync_work before freeing oinfo ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails. | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: remove unreasonable unlock in ocfs2_read_blocks Patch series "Misc fixes for ocfs2_read_blocks", v5. This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix the issue reported by syzbot, which detects bad unlock balance in ocfs2_read_blocks(). The second patch fixes an issue reported by Heming Zhao when reviewing above fix. This patch (of 2): There was a lock release before exiting, so remove the unreasonable unlock. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix memfd_pin_folios free_huge_pages leak memfd_pin_folios followed by unpin_folios fails to restore free_huge_pages if the pages were not already faulted in, because the folio refcount for pages created by memfd_alloc_folio never goes to 0. memfd_pin_folios needs another folio_put to undo the folio_try_get below: memfd_alloc_folio() alloc_hugetlb_folio_nodemask() dequeue_hugetlb_folio_nodemask() dequeue_hugetlb_folio_node_exact() folio_ref_unfreeze(folio, 1); ; adds 1 refcount folio_try_get() ; adds 1 refcount hugetlb_add_to_page_cache() ; adds 512 refcount (on x86) With the fix, after memfd_pin_folios + unpin_folios, the refcount for the (unfaulted) page is 512, which is correct, as the refcount for a faulted unpinned page is 513. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mailbox: bcm2835: Fix timeout during suspend mode During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package() ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0 ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause NULL pointer dereference later. [ rjw: Subject and changelog edits ] | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: i2c: ar0521: Use cansleep version of gpiod_set_value() If we use GPIO reset from I2C port expander, we must use *_cansleep() variant of GPIO functions. This was not done in ar0521_power_on()/ar0521_power_off() functions. Let's fix that. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c Modules linked in: CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : gpiod_set_value+0x74/0x7c lr : ar0521_power_on+0xcc/0x290 sp : ffffff8001d7ab70 x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000 x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088 x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088 x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80 x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000 x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930 x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0 x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780 x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: gpiod_set_value+0x74/0x7c ar0521_power_on+0xcc/0x290 ... | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: fix timer use-after-free on failed mount Syzbot has found an ODEBUG bug in ext4_fill_super The del_timer_sync function cancels the s_err_report timer, which reminds about filesystem errors daily. We should guarantee the timer is no longer active before kfree(sbi). When filesystem mounting fails, the flow goes to failed_mount3, where an error occurs when ext4_stop_mmpd is called, causing a read I/O failure. This triggers the ext4_handle_error function that ultimately re-arms the timer, leaving the s_err_report timer active before kfree(sbi) is called. Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd. | 7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error
In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail()
to recover some journal space. But if an error occurs while executing
jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free
space right away, we try other branches, and if j_committing_transaction
is NULL (i.e., the tid is 0), we will get the following complain:
============================================
JBD2: I/O error when updating journal superblock for sdd-8.
__jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available
__jbd2_log_wait_for_space: no way to get more journal space in sdd-8
------------[ cut here ]------------
WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0
Modules linked in:
CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1
RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0
Call Trace:
|
5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: reserve space for inline xattr before attaching reflink tree One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix null-ptr-deref when journal load failed. During the mounting process, if journal_reset() fails because of too short journal, then lead to jbd2_journal_load() fails with NULL j_sb_buffer. Subsequently, ocfs2_journal_shutdown() calls jbd2_journal_flush()->jbd2_cleanup_journal_tail()-> __jbd2_update_log_tail()->jbd2_journal_update_sb_log_tail() ->lock_buffer(journal->j_sb_buffer), resulting in a null-pointer dereference error. To resolve this issue, we should check the JBD2_LOADED flag to ensure the journal was properly loaded. Additionally, use journal instead of osb->journal directly to simplify the code. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gfs2: fix double destroy_workqueue error When gfs2_fill_super() fails, destroy_workqueue() is called within gfs2_gl_hash_clear(), and the subsequent code path calls destroy_workqueue() on the same work queue again. This issue can be fixed by setting the work queue pointer to NULL after the first destroy_workqueue() call and checking for a NULL pointer before attempting to destroy the work queue again. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ACPI: battery: Fix possible crash when unregistering a battery hook When a battery hook returns an error when adding a new battery, then the battery hook is automatically unregistered. However the battery hook provider cannot know that, so it will later call battery_hook_unregister() on the already unregistered battery hook, resulting in a crash. Fix this by using the list head to mark already unregistered battery hooks as already being unregistered so that they can be ignored by battery_hook_unregister(). | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: static_call: Replace pointless WARN_ON() in static_call_module_notify() static_call_module_notify() triggers a WARN_ON(), when memory allocation fails in __static_call_add_module(). That's not really justified, because the failure case must be correctly handled by the well known call chain and the error code is passed through to the initiating userspace application. A memory allocation fail is not a fatal problem, but the WARN_ON() takes the machine out when panic_on_warn is set. Replace it with a pr_warn(). | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix crash caused by calling __xfrm_state_delete() twice
The km.state is not checked in driver's delayed work. When
xfrm_state_check_expire() is called, the state can be reset to
XFRM_STATE_EXPIRED, even if it is XFRM_STATE_DEAD already. This
happens when xfrm state is deleted, but not freed yet. As
__xfrm_state_delete() is called again in xfrm timer, the following
crash occurs.
To fix this issue, skip xfrm_state_check_expire() if km.state is not
XFRM_STATE_VALID.
Oops: general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP
CPU: 5 UID: 0 PID: 7448 Comm: kworker/u102:2 Not tainted 6.11.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_sw_limits [mlx5_core]
RIP: 0010:__xfrm_state_delete+0x3d/0x1b0
Code: 0f 84 8b 01 00 00 48 89 fd c6 87 c8 00 00 00 05 48 8d bb 40 10 00 00 e8 11 04 1a 00 48 8b 95 b8 00 00 00 48 8b 85 c0 00 00 00 <48> 89 42 08 48 89 10 48 8b 55 10 48 b8 00 01 00 00 00 00 ad de 48
RSP: 0018:ffff88885f945ec8 EFLAGS: 00010246
RAX: dead000000000122 RBX: ffffffff82afa940 RCX: 0000000000000036
RDX: dead000000000100 RSI: 0000000000000000 RDI: ffffffff82afb980
RBP: ffff888109a20340 R08: ffff88885f945ea0 R09: 0000000000000000
R10: 0000000000000000 R11: ffff88885f945ff8 R12: 0000000000000246
R13: ffff888109a20340 R14: ffff88885f95f420 R15: ffff88885f95f400
FS: 0000000000000000(0000) GS:ffff88885f940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2163102430 CR3: 00000001128d6001 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: prevent nf_skb_duplicated corruption
syzbot found that nf_dup_ipv4() or nf_dup_ipv6() could write
per-cpu variable nf_skb_duplicated in an unsafe way [1].
Disabling preemption as hinted by the splat is not enough,
we have to disable soft interrupts as well.
[1]
BUG: using __this_cpu_write() in preemptible [00000000] code: syz.4.282/6316
caller is nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87
CPU: 0 UID: 0 PID: 6316 Comm: syz.4.282 Not tainted 6.11.0-rc7-syzkaller-00104-g7052622fccb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
|
5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix possible crash on mgmt_index_removed If mgmt_index_removed is called while there are commands queued on cmd_sync it could lead to crashes like the bellow trace: 0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc 0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth] 0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth] 0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth] So while handling mgmt_index_removed this attempts to dequeue commands passed as user_data to cmd_sync. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix uaf in l2cap_connect
[Syzbot reported]
BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54
CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci2 hci_rx_work
Call Trace:
|
7.8 |
High |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 C ---truncated--- | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init() One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net: test for not too small csum_start in virtio_net_hdr_to_skb()
syzbot was able to trigger this warning [1], after injecting a
malicious packet through af_packet, setting skb->csum_start and thus
the transport header to an incorrect value.
We can at least make sure the transport header is after
the end of the network header (with a estimated minimal size).
[1]
[ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0
mac=(-1,-1) mac_len=0 net=(16,-6) trans=10
shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0))
csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0
priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0
encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0)
[ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9
[ 67.877764] sk family=17 type=3 proto=0
[ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00
[ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02
[ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00
[ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e
[ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00
[ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.887384] skb frag: 00000100: 00 00
[ 67.887878] ------------[ cut here ]------------
[ 67.887908] offset (-6) >= skb_headlen() (14)
[ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2))
[ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs
[ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011
[ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2))
[ 67.891043] Call Trace:
[ 67.891173] |
5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ppp: do not assume bh is held in ppp_channel_bridge_input()
Networking receive path is usually handled from BH handler.
However, some protocols need to acquire the socket lock, and
packets might be stored in the socket backlog is the socket was
owned by a user process.
In this case, release_sock(), __release_sock(), and sk_backlog_rcv()
might call the sk->sk_backlog_rcv() handler in process context.
sybot caught ppp was not considering this case in
ppp_channel_bridge_input() :
WARNING: inconsistent lock state
6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline]
ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline]
ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304
pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv include/net/sock.h:1111 [inline]
__release_sock+0x1a8/0x3d8 net/core/sock.c:3004
release_sock+0x68/0x1b8 net/core/sock.c:3558
pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x374/0x4f4 net/socket.c:2204
__do_sys_sendto net/socket.c:2216 [inline]
__se_sys_sendto net/socket.c:2212 [inline]
__arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
irq event stamp: 282914
hardirqs last enabled at (282914): [ |
5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/ncsi: Disable the ncsi work before freeing the associated structure The work function can run after the ncsi device is freed, resulting in use-after-free bugs or kernel panic. | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
In sctp_listen_start() invoked by sctp_inet_listen(), it should set the
sk_state back to CLOSED if sctp_autobind() fails due to whatever reason.
Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse
is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will
be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash
is NULL.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617
Call Trace:
|
5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc_submit: add missing locking in wedged_fini Any non-wedged queue can have a zero refcount here and can be running concurrently with an async queue destroy, therefore dereferencing the queue ptr to check wedge status after the lookup can trigger UAF if queue is not wedged. Fix this by keeping the submission_state lock held around the check to postpone the free and make the check safe, before dropping again around the put() to avoid the deadlock. (cherry picked from commit d28af0b6b9580b9f90c265a7da0315b0ad20bbfd) | 5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Prevent null pointer access in xe_migrate_copy
xe_migrate_copy designed to copy content of TTM resources. When source
resource is null, it will trigger a NULL pointer dereference in
xe_migrate_copy. To avoid this situation, update lacks source flag to
true for this case, the flag will trigger xe_migrate_clear rather than
xe_migrate_copy.
Issue trace:
<7> [317.089847] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 14,
sizes: 4194304 & 4194304
<7> [317.089945] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 15,
sizes: 4194304 & 4194304
<1> [317.128055] BUG: kernel NULL pointer dereference, address:
0000000000000010
<1> [317.128064] #PF: supervisor read access in kernel mode
<1> [317.128066] #PF: error_code(0x0000) - not-present page
<6> [317.128069] PGD 0 P4D 0
<4> [317.128071] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4> [317.128074] CPU: 1 UID: 0 PID: 1440 Comm: kunit_try_catch Tainted:
G U N 6.11.0-rc7-xe #1
<4> [317.128078] Tainted: [U]=USER, [N]=TEST
<4> [317.128080] Hardware name: Intel Corporation Lunar Lake Client
Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D80.2407291239 07/29/2024
<4> [317.128082] RIP: 0010:xe_migrate_copy+0x66/0x13e0 [xe]
<4> [317.128158] Code: 00 00 48 89 8d e0 fe ff ff 48 8b 40 10 4c 89 85 c8
fe ff ff 44 88 8d bd fe ff ff 65 48 8b 3c 25 28 00 00 00 48 89 7d d0 31
ff <8b> 79 10 48 89 85 a0 fe ff ff 48 8b 00 48 89 b5 d8 fe ff ff 83 ff
<4> [317.128162] RSP: 0018:ffffc9000167f9f0 EFLAGS: 00010246
<4> [317.128164] RAX: ffff8881120d8028 RBX: ffff88814d070428 RCX:
0000000000000000
<4> [317.128166] RDX: ffff88813cb99c00 RSI: 0000000004000000 RDI:
0000000000000000
<4> [317.128168] RBP: ffffc9000167fbb8 R08: ffff88814e7b1f08 R09:
0000000000000001
<4> [317.128170] R10: 0000000000000001 R11: 0000000000000001 R12:
ffff88814e7b1f08
<4> [317.128172] R13: ffff88814e7b1f08 R14: ffff88813cb99c00 R15:
0000000000000001
<4> [317.128174] FS: 0000000000000000(0000) GS:ffff88846f280000(0000)
knlGS:0000000000000000
<4> [317.128176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [317.128178] CR2: 0000000000000010 CR3: 000000011f676004 CR4:
0000000000770ef0
<4> [317.128180] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
<4> [317.128182] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7:
0000000000000400
<4> [317.128184] PKRU: 55555554
<4> [317.128185] Call Trace:
<4> [317.128187] |
5.5 |
Medium |
|
18h02 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: gpiolib: Fix potential NULL pointer dereference in gpiod_get_label() In `gpiod_get_label()`, it is possible that `srcu_dereference_check()` may return a NULL pointer, leading to a scenario where `label->str` is accessed without verifying if `label` itself is NULL. This patch adds a proper NULL check for `label` before accessing `label->str`. The check for `label->str != NULL` is removed because `label->str` can never be NULL if `label` is not NULL. This fixes the issue where the label name was being printed as `(efault)` when dumping the sysfs GPIO file when `label == NULL`. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: l2tp: prevent possible tunnel refcount underflow When a session is created, it sets a backpointer to its tunnel. When the session refcount drops to 0, l2tp_session_free drops the tunnel refcount if session->tunnel is non-NULL. However, session->tunnel is set in l2tp_session_create, before the tunnel refcount is incremented by l2tp_session_register, which leaves a small window where session->tunnel is non-NULL when the tunnel refcount hasn't been bumped. Moving the assignment to l2tp_session_register is trivial but l2tp_session_create calls l2tp_session_set_header_len which uses session->tunnel to get the tunnel's encap. Add an encap arg to l2tp_session_set_header_len to avoid using session->tunnel. If l2tpv3 sessions have colliding IDs, it is possible for l2tp_v3_session_get to race with l2tp_session_register and fetch a session which doesn't yet have session->tunnel set. Add a check for this case. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: avoid to add interface to list twice when SER
If SER L2 occurs during the WoWLAN resume flow, the add interface flow
is triggered by ieee80211_reconfig(). However, due to
rtw89_wow_resume() return failure, it will cause the add interface flow
to be executed again, resulting in a double add list and causing a kernel
panic. Therefore, we have added a check to prevent double adding of the
list.
list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:37!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W O 6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021
Workqueue: events_freezable ieee80211_restart_work [mac80211]
RIP: 0010:__list_add_valid_or_report+0x5e/0xb0
Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12
RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246
RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900
RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001
RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0
R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060
R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010
FS: 0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0
Call Trace:
|
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call. The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Set correct chandef when starting CAC When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC. Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC. Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24 [shorten subject, remove OCB, reorder cases to match previous list] | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net/xen-netback: prevent UAF in xenvif_flush_hash() During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe. | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ACPI: PAD: fix crash in exit_round_robin()
The kernel occasionally crashes in cpumask_clear_cpu(), which is called
within exit_round_robin(), because when executing clear_bit(nr, addr) with
nr set to 0xffffffff, the address calculation may cause misalignment within
the memory, leading to access to an invalid memory address.
----------
BUG: unable to handle kernel paging request at ffffffffe0740618
...
CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1
...
RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad]
Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 |
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
It's observed that a crash occurs during hot-remove a memory device,
in which user is accessing the hugetlb. See calltrace as following:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 14045 at arch/x86/mm/fault.c:1278 do_user_addr_fault+0x2a0/0x790
Modules linked in: kmem device_dax cxl_mem cxl_pmem cxl_port cxl_pci dax_hmem dax_pmem nd_pmem cxl_acpi nd_btt cxl_core crc32c_intel nvme virtiofs fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc s
mirror dm_region_hash dm_log dm_mod
CPU: 1 PID: 14045 Comm: daxctl Not tainted 6.10.0-rc2-lizhijian+ #492
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:do_user_addr_fault+0x2a0/0x790
Code: 48 8b 00 a8 04 0f 84 b5 fe ff ff e9 1c ff ff ff 4c 89 e9 4c 89 e2 be 01 00 00 00 bf 02 00 00 00 e8 b5 ef 24 00 e9 42 fe ff ff <0f> 0b 48 83 c4 08 4c 89 ea 48 89 ee 4c 89 e7 5b 5d 41 5c 41 5d 41
RSP: 0000:ffffc90000a575f0 EFLAGS: 00010046
RAX: ffff88800c303600 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000001000 RSI: ffffffff82504162 RDI: ffffffff824b2c36
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a57658
R13: 0000000000001000 R14: ffff88800bc2e040 R15: 0000000000000000
FS: 00007f51cb57d880(0000) GS:ffff88807fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000001000 CR3: 00000000072e2004 CR4: 00000000001706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
4.6 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
blk_iocost: fix more out of bound shifts
Recently running UBSAN caught few out of bound shifts in the
ioc_forgive_debts() function:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
Call Trace:
|
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't readahead the relocation inode on RST
On relocation we're doing readahead on the relocation inode, but if the
filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to
preallocated extents not being mapped in the RST) from the lookup.
But readahead doesn't handle the error and submits invalid reads to the
device, causing an assertion in the scatter-gather list code:
BTRFS info (device nvme1n1): balance: start -d -m -s
BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0
BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0
------------[ cut here ]------------
kernel BUG at include/linux/scatterlist.h:115!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567
RIP: 0010:__blk_rq_map_sg+0x339/0x4a0
RSP: 0018:ffffc90001a43820 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802
RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000
RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8
R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000
FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0
Call Trace:
|
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix array out-of-bound access in SoC stats Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process() function access ath12k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix array out-of-bound access in SoC stats Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx() function access ath11k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath11k_dp_process_rx() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: avoid NULL pointer dereference iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta pointer is not NULL. It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is dereferencing the ieee80211_sta pointer. If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL pointer. Fix this by checking the sta pointer before retrieving the mvmsta from it. If sta is not NULL, then mvmsta isn't either. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid reading out of bounds when loading TX power FW elements Because the loop-expression will do one more time before getting false from cond-expression, the original code copied one more entry size beyond valid region. Fix it by moving the entry copy to loop-body. | 7.1 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/ioapic: Handle allocation failures gracefully Breno observed panics when using failslab under certain conditions during runtime: can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480 That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed. The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode. Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()
For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is
defined as NR_CPUS instead of the number of possible cpus, this
will cause the following system panic:
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
...
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1
...
BUG: unable to handle page fault for address: ffffffff9911c8c8
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W
6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6
RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0
RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082
CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0
Call Trace:
|
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fbdev: efifb: Register sysfs groups through driver core The driver core can register and cleanup sysfs groups already. Make use of that functionality to simplify the error handling and cleanup. Also avoid a UAF race during unregistering where the sysctl attributes were usable after the info struct was freed. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fbdev: pxafb: Fix possible use after free in pxafb_task() In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime. | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Pass non-null to dcn20_validate_apply_pipe_split_flags [WHAT & HOW] "dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it cannot be a null pointer. Let's pass a valid pointer to avoid null dereference. This fixes 2 FORWARD_NULL issues reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using them [WHAT & HOW] These pointers are null checked previously in the same function, indicating they might be null as reported by Coverity. As a result, they need to be checked when used again. This fixes 3 FORWARD_NULL issue reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before used [WHAT & HOW] Poniters, such as dc->clk_mgr, are null checked previously in the same function, so Coverity warns "implies that "dc->clk_mgr" might be null". As a result, these pointers need to be checked when used again. This fixes 10 FORWARD_NULL issues reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before multiple uses [WHAT & HOW] Poniters, such as stream_enc and dc->bw_vbios, are null checked previously in the same function, so Coverity warns "implies that stream_enc and dc->bw_vbios might be null". They are used multiple times in the subsequent code and need to be checked. This fixes 10 FORWARD_NULL issues reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn32_acquire_idle_pipe_for_head_pipe_in_layer This commit addresses a potential null pointer dereference issue in the `dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn30_init_hw This commit addresses a potential null pointer dereference issue in the `dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or `dc->clk_mgr->funcs` is null. The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn401_init_hw This commit addresses a potential null pointer dereference issue in the `dcn401_init_hw` function. The issue could occur when `dc->clk_mgr` or `dc->clk_mgr->funcs` is null. The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:416 dcn401_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 225) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for clk_mgr in dcn32_init_hw This commit addresses a potential null pointer dereference issue in the `dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is null. The fix adds a check to ensure `dc->clk_mgr` is not null before accessing its functions. This prevents a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe This commit addresses a null pointer dereference issue in the `dcn20_program_pipe` function. The issue could occur when `pipe_ctx->plane_state` is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1925 dcn20_program_pipe() error: we previously assumed 'pipe_ctx->plane_state' could be null (see line 1877) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for top_pipe_to_program in commit_planes_for_stream This commit addresses a null pointer dereference issue in the `commit_planes_for_stream` function at line 4140. The issue could occur when `top_pipe_to_program` is null. The fix adds a check to ensure `top_pipe_to_program` is not null before accessing its stream_res. This prevents a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle null 'stream_status' in 'planes_changed_for_existing_stream' This commit adds a null check for 'stream_status' in the function 'planes_changed_for_existing_stream'. Previously, the code assumed 'stream_status' could be null, but did not handle the case where it was actually null. This could lead to a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn20_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn20_set_output_transfer_func function. Previously, set_output_gamma was being checked for null at line 1030, but then it was being dereferenced without any null check at line 1048. This could potentially lead to a null pointer dereference error if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma at line 1048. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn401_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn401_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn32_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn32_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be null at line 8388, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor() error: we previously assumed 'afb' could be null (see line 8388) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using dc->clk_mgr [WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointer before try to access it [why & how] Change the order of the pipe_ctx->plane_state check to ensure that plane_state is not null before accessing it. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for 'afb' in amdgpu_dm_plane_handle_cursor_update (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add list empty check to avoid null pointer issue Add list empty check to avoid null pointer issues in some corner cases. - list_for_each_entry_safe() | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix uaf in dbFreeBits
[syzbot reported]
==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752
Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216
CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
Call Trace:
|
7 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: check if leafidx greater than num leaves per dmap tree syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf. Shaggy: Modified sanity check to apply to control pages as well as leaf pages. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Assign msm_gpu->pdev earlier to avoid nullptrs There are some cases, such as the one uncovered by Commit 46d4efcccc68 ("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails") where msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); is called on gpu->pdev == NULL, as the GPU device has not been fully initialized yet. Turns out that there's more than just the aforementioned path that causes this to happen (e.g. the case when there's speedbin data in the catalog, but opp-supported-hw is missing in DT). Assigning msm_gpu->pdev earlier seems like the least painful solution to this, therefore do so. Patchwork: https://patchwork.freedesktop.org/patch/602742/ | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of new_ea in ea_buffer syzbot reports that lzo1x_1_do_compress is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in lzo1x_1_do_compress+0x19f9/0x2510 lib/lzo/lzo1x_compress.c:178 ... Uninit was stored to memory at: ea_put fs/jfs/xattr.c:639 [inline] ... Local variable ea_buf created at: __jfs_setxattr+0x5d/0x1ae0 fs/jfs/xattr.c:662 __jfs_xattr_set+0xe6/0x1f0 fs/jfs/xattr.c:934 ===================================================== The reason is ea_buf->new_ea is not initialized properly. Fix this by using memset to empty its content at the beginning in ea_get(). | 7.1 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominators' default to 1 [WHAT & HOW] Variables used as denominators and maybe not assigned to other values, should not be 0. Change their default to 1 so they are never 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null-initialized variables [WHAT & HOW] drr_timing and subvp_pipe are initialized to null and they are not always assigned new values. It is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check phantom_stream before it is used dcn32_enable_phantom_stream can return null, so returned value must be checked before used. This fixes 1 NULL_RETURNS issue reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check stream before comparing them [WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them. This fixes 1 FORWARD_NULL issue reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix index out of bounds in degamma hardware format translation Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check stream_status before it is used [WHAT & HOW] dc_state_get_stream_status can return null, and therefore null must be checked before stream_status is used. This fixes 1 NULL_RETURNS issue reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize get_bytes_per_element's default to 1 Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Validate hdwq pointers before dereferencing in reset/errata paths When the HBA is undergoing a reset or is handling an errata event, NULL ptr dereference crashes may occur in routines such as lpfc_sli_flush_io_rings(), lpfc_dev_loss_tmo_callbk(), or lpfc_abort_handler(). Add NULL ptr checks before dereferencing hdwq pointers that may have been freed due to operations colliding with a reset or errata event handler. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: ensure the fw_info is not null before using it This resolves the dereference null return value warning reported by Coverity. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: avoid use-after-free in ext4_ext_show_leaf() In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows: ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!! Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way. Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly. This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality. | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a sdiv overflow issue Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't panic system for no free segment fault injection f2fs: fix to don't panic system for no free segment fault injection syzbot reports a f2fs bug as below: F2FS-fs (loop0): inject no free segment in get_new_segment of __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 F2FS-fs (loop0): Stopped filesystem due to reason: 7 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2748! CPU: 0 UID: 0 PID: 5109 Comm: syz-executor304 Not tainted 6.11.0-rc6-syzkaller-00363-g89f5e14d05b4 #0 RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 Call Trace: __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 f2fs_allocate_new_section fs/f2fs/segment.c:3181 [inline] f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3195 f2fs_expand_inode_data+0x5d6/0xbb0 fs/f2fs/file.c:1799 f2fs_fallocate+0x448/0x960 fs/f2fs/file.c:1903 vfs_fallocate+0x553/0x6c0 fs/open.c:334 do_vfs_ioctl+0x2592/0x2e50 fs/ioctl.c:886 __do_sys_ioctl fs/ioctl.c:905 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 The root cause is when we inject no free segment fault into f2fs, we should not panic system, fix it. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] |
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm, slub: avoid zeroing kmalloc redzone Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested"), setting orig_size treats the wasted space (object_size - orig_size) as a redzone. However with init_on_free=1 we clear the full object->size, including the redzone. Additionally we clear the object metadata, including the stored orig_size, making it zero, which makes check_object() treat the whole object as a redzone. These issues lead to the following BUG report with "slub_debug=FUZ init_on_free=1": [ 0.000000] ============================================================================= [ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten [ 0.000000] ----------------------------------------------------------------------------- [ 0.000000] [ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc [ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc [ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff) [ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8 [ 0.000000] [ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........ [ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........ [ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........ [ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144 [ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x90/0xe8 [ 0.000000] show_stack+0x18/0x24 [ 0.000000] dump_stack_lvl+0x74/0x8c [ 0.000000] dump_stack+0x18/0x24 [ 0.000000] print_trailer+0x150/0x218 [ 0.000000] check_object+0xe4/0x454 [ 0.000000] free_to_partial_list+0x2f8/0x5ec To address the issue, use orig_size to clear the used area. And restore the value of orig_size after clear the remaining area. When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns s->object_size. So when using memset to init the area, the size can simply be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not enabled. And orig_size can never be bigger than object_size. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix slab-use-after-free in ext4_split_extent_at()
We hit the following use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0
Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40
CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724
Call Trace:
|
7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ext4: aovid use-after-free in ext4_ext_insert_extent()
As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is
reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and
cause UAF. Below is a sample trace with dummy values:
ext4_ext_insert_extent
path = *ppath = 2000
ext4_ext_create_new_leaf(ppath)
ext4_find_extent(ppath)
path = *ppath = 2000
if (depth > path[0].p_maxdepth)
kfree(path = 2000);
*ppath = path = NULL;
path = kcalloc() = 3000
*ppath = 3000;
return path;
/* here path is still 2000, UAF! */
eh = path[depth].p_hdr
==================================================================
BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330
Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179
CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866
Call Trace:
|
7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix double brelse() the buffer of the extents path
In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been
released, otherwise it may be released twice. An example of what triggers
this is as follows:
split2 map split1
|--------|-------|--------|
ext4_ext_map_blocks
ext4_ext_handle_unwritten_extents
ext4_split_convert_extents
// path->p_depth == 0
ext4_split_extent
// 1. do split1
ext4_split_extent_at
|ext4_ext_insert_extent
| ext4_ext_create_new_leaf
| ext4_ext_grow_indepth
| le16_add_cpu(&neh->eh_depth, 1)
| ext4_find_extent
| // return -ENOMEM
|// get error and try zeroout
|path = ext4_find_extent
| path->p_depth = 1
|ext4_ext_try_to_merge
| ext4_ext_try_to_merge_up
| path->p_depth = 0
| brelse(path[1].p_bh) ---> not set to NULL here
|// zeroout success
// 2. update path
ext4_find_extent
// 3. do split2
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
le16_add_cpu(&neh->eh_depth, 1)
ext4_find_extent
path[0].p_bh = NULL;
path->p_depth = 1
read_extent_tree_block ---> return err
// path[1].p_bh is still the old value
ext4_free_ext_path
ext4_ext_drop_refs
// path->p_depth == 1
brelse(path[1].p_bh) ---> brelse a buffer twice
Finally got the following WARRNING when removing the buffer from lru:
============================================
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90
CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716
RIP: 0010:__brelse+0x58/0x90
Call Trace:
|
7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ext4: update orig_path in ext4_find_extent()
In ext4_find_extent(), if the path is not big enough, we free it and set
*orig_path to NULL. But after reallocating and successfully initializing
the path, we don't update *orig_path, in which case the caller gets a
valid path but a NULL ppath, and this may cause a NULL pointer dereference
or a path memory leak. For example:
ext4_split_extent
path = *ppath = 2000
ext4_find_extent
if (depth > path[0].p_maxdepth)
kfree(path = 2000);
*orig_path = path = NULL;
path = kcalloc() = 3000
ext4_split_extent_at(*ppath = NULL)
path = *ppath;
ex = path[depth].p_ext;
// NULL pointer dereference!
==================================================================
BUG: kernel NULL pointer dereference, address: 0000000000000010
CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847
RIP: 0010:ext4_split_extent_at+0x6d/0x560
Call Trace:
|
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: fix off by one issue in alloc_flex_gd() Wesley reported an issue: ================================================================== EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks ------------[ cut here ]------------ kernel BUG at fs/ext4/resize.c:324! CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27 RIP: 0010:ext4_resize_fs+0x1212/0x12d0 Call Trace: __ext4_ioctl+0x4e0/0x1800 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0x99/0xd0 x64_sys_call+0x1206/0x20d0 do_syscall_64+0x72/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== While reviewing the patch, Honza found that when adjusting resize_bg in alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than flexbg_size. The reproduction of the problem requires the following: o_group = flexbg_size * 2 * n; o_size = (o_group + 1) * group_size; n_group: [o_group + flexbg_size, o_group + flexbg_size * 2) o_size = (n_group + 1) * group_size; Take n=0,flexbg_size=16 as an example: last:15 |o---------------|--------------n-| o_group:0 resize to n_group:30 The corresponding reproducer is: img=test.img rm -f $img truncate -s 600M $img mkfs.ext4 -F $img -b 1024 -G 16 8M dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 248M Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE() to prevent the issue from happening again. [ Note: another reproucer which this commit fixes is: img=test.img rm -f $img truncate -s 25MiB $img mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img truncate -s 3GiB $img dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 3G umount $dev losetup -d $dev -- TYT ] | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm: omapdrm: Add missing check for alloc_ordered_workqueue As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: resource: fix region_intersects() vs add_memory_driver_managed() On a system with CXL memory, the resource tree (/proc/iomem) related to CXL memory may look like something as follows. 490000000-50fffffff : CXL Window 0 490000000-50fffffff : region0 490000000-50fffffff : dax0.0 490000000-50fffffff : System RAM (kmem) Because drivers/dax/kmem.c calls add_memory_driver_managed() during onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL Window X". This confuses region_intersects(), which expects all "System RAM" resources to be at the top level of iomem_resource. This can lead to bugs. For example, when the following command line is executed to write some memory in CXL memory range via /dev/mem, $ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1 dd: error writing '/dev/mem': Bad address 1+0 records in 0+0 records out 0 bytes copied, 0.0283507 s, 0.0 kB/s the command fails as expected. However, the error code is wrong. It should be "Operation not permitted" instead of "Bad address". More seriously, the /dev/mem permission checking in devmem_is_allowed() passes incorrectly. Although the accessing is prevented later because ioremap() isn't allowed to map system RAM, it is a potential security issue. During command executing, the following warning is reported in the kernel log for calling ioremap() on system RAM. ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d Call Trace: memremap+0xcb/0x184 xlate_dev_mem_ptr+0x25/0x2f write_mem+0x94/0xfb vfs_write+0x128/0x26d ksys_write+0xac/0xfe do_syscall_64+0x9a/0xfd entry_SYSCALL_64_after_hwframe+0x4b/0x53 The details of command execution process are as follows. In the above resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a top level resource. So, region_intersects() will report no System RAM resources in the CXL memory region incorrectly, because it only checks the top level resources. Consequently, devmem_is_allowed() will return 1 (allow access via /dev/mem) for CXL memory region incorrectly. Fortunately, ioremap() doesn't allow to map System RAM and reject the access. So, region_intersects() needs to be fixed to work correctly with the resource tree with "System RAM" not at top level as above. To fix it, if we found a unmatched resource in the top level, we will continue to search matched resources in its descendant resources. So, we will not miss any matched resources in resource tree anymore. In the new implementation, an example resource tree |------------- "CXL Window 0" ------------| |-- "System RAM" --| will behave similar as the following fake resource tree for region_intersects(, IORESOURCE_SYSTEM_RAM, ), |-- "System RAM" --||-- "CXL Window 0a" --| Where "CXL Window 0a" is part of the original "CXL Window 0" that isn't covered by "System RAM". | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible null-ptr-deref in ocfs2_set_buffer_uptodate When doing cleanup, if flags without OCFS2_BH_READAHEAD, it may trigger NULL pointer dereference in the following ocfs2_set_buffer_uptodate() if bh is NULL. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix UAF around queue destruction We currently do stuff like queuing the final destruction step on a random system wq, which will outlive the driver instance. With bad timing we can teardown the driver with one or more work workqueue still being alive leading to various UAF splats. Add a fini step to ensure user queues are properly torn down. At this point GuC should already be nuked so queue itself should no longer be referenced from hw pov. v2 (Matt B) - Looks much safer to use a waitqueue and then just wait for the xa_array to become empty before triggering the drain. (cherry picked from commit 861108666cc0e999cffeab6aff17b662e68774e3) | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfsd: map the EBADMSG to nfserr_io to avoid warning Ext4 will throw -EBADMSG through ext4_readdir when a checksum error occurs, resulting in the following WARNING. Fix it by mapping EBADMSG to nfserr_io. nfsd_buffered_readdir iterate_dir // -EBADMSG -74 ext4_readdir // .iterate_shared ext4_dx_readdir ext4_htree_fill_tree htree_dirblock_to_tree ext4_read_dirblock __ext4_read_dirblock ext4_dirblock_csum_verify warn_no_space_for_csum __warn_no_space_for_csum return ERR_PTR(-EFSBADCRC) // -EBADMSG -74 nfserrno // WARNING [ 161.115610] ------------[ cut here ]------------ [ 161.116465] nfsd: non-standard errno: -74 [ 161.117315] WARNING: CPU: 1 PID: 780 at fs/nfsd/nfsproc.c:878 nfserrno+0x9d/0xd0 [ 161.118596] Modules linked in: [ 161.119243] CPU: 1 PID: 780 Comm: nfsd Not tainted 5.10.0-00014-g79679361fd5d #138 [ 161.120684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qe mu.org 04/01/2014 [ 161.123601] RIP: 0010:nfserrno+0x9d/0xd0 [ 161.124676] Code: 0f 87 da 30 dd 00 83 e3 01 b8 00 00 00 05 75 d7 44 89 ee 48 c7 c7 c0 57 24 98 89 44 24 04 c6 05 ce 2b 61 03 01 e8 99 20 d8 00 <0f> 0b 8b 44 24 04 eb b5 4c 89 e6 48 c7 c7 a0 6d a4 99 e8 cc 15 33 [ 161.127797] RSP: 0018:ffffc90000e2f9c0 EFLAGS: 00010286 [ 161.128794] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 161.130089] RDX: 1ffff1103ee16f6d RSI: 0000000000000008 RDI: fffff520001c5f2a [ 161.131379] RBP: 0000000000000022 R08: 0000000000000001 R09: ffff8881f70c1827 [ 161.132664] R10: ffffed103ee18304 R11: 0000000000000001 R12: 0000000000000021 [ 161.133949] R13: 00000000ffffffb6 R14: ffff8881317c0000 R15: ffffc90000e2fbd8 [ 161.135244] FS: 0000000000000000(0000) GS:ffff8881f7080000(0000) knlGS:0000000000000000 [ 161.136695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 161.137761] CR2: 00007fcaad70b348 CR3: 0000000144256006 CR4: 0000000000770ee0 [ 161.139041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 161.140291] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 161.141519] PKRU: 55555554 [ 161.142076] Call Trace: [ 161.142575] ? __warn+0x9b/0x140 [ 161.143229] ? nfserrno+0x9d/0xd0 [ 161.143872] ? report_bug+0x125/0x150 [ 161.144595] ? handle_bug+0x41/0x90 [ 161.145284] ? exc_invalid_op+0x14/0x70 [ 161.146009] ? asm_exc_invalid_op+0x12/0x20 [ 161.146816] ? nfserrno+0x9d/0xd0 [ 161.147487] nfsd_buffered_readdir+0x28b/0x2b0 [ 161.148333] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.149258] ? nfsd_buffered_filldir+0xf0/0xf0 [ 161.150093] ? wait_for_concurrent_writes+0x170/0x170 [ 161.151004] ? generic_file_llseek_size+0x48/0x160 [ 161.151895] nfsd_readdir+0x132/0x190 [ 161.152606] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.153516] ? nfsd_unlink+0x380/0x380 [ 161.154256] ? override_creds+0x45/0x60 [ 161.155006] nfsd4_encode_readdir+0x21a/0x3d0 [ 161.155850] ? nfsd4_encode_readlink+0x210/0x210 [ 161.156731] ? write_bytes_to_xdr_buf+0x97/0xe0 [ 161.157598] ? __write_bytes_to_xdr_buf+0xd0/0xd0 [ 161.158494] ? lock_downgrade+0x90/0x90 [ 161.159232] ? nfs4svc_decode_voidarg+0x10/0x10 [ 161.160092] nfsd4_encode_operation+0x15a/0x440 [ 161.160959] nfsd4_proc_compound+0x718/0xe90 [ 161.161818] nfsd_dispatch+0x18e/0x2c0 [ 161.162586] svc_process_common+0x786/0xc50 [ 161.163403] ? nfsd_svc+0x380/0x380 [ 161.164137] ? svc_printk+0x160/0x160 [ 161.164846] ? svc_xprt_do_enqueue.part.0+0x365/0x380 [ 161.165808] ? nfsd_svc+0x380/0x380 [ 161.166523] ? rcu_is_watching+0x23/0x40 [ 161.167309] svc_process+0x1a5/0x200 [ 161.168019] nfsd+0x1f5/0x380 [ 161.168663] ? nfsd_shutdown_threads+0x260/0x260 [ 161.169554] kthread+0x1c4/0x210 [ 161.170224] ? kthread_insert_work_sanity_check+0x80/0x80 [ 161.171246] ret_from_fork+0x1f/0x30 | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition In the svc_i3c_master_probe function, &master->hj_work is bound with svc_i3c_master_hj_work, &master->ibi_work is bound with svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the hj_work, svc_i3c_master_irq_handler can start the ibi_work. If we remove the module which will call svc_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | svc_i3c_master_hj_work svc_i3c_master_remove | i3c_master_unregister(&master->base)| device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in svc_i3c_master_remove. | 7 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/filemap: fix filemap_get_folios_contig THP panic Patch series "memfd-pin huge page fixes". Fix multiple bugs that occur when using memfd_pin_folios with hugetlb pages and THP. The hugetlb bugs only bite when the page is not yet faulted in when memfd_pin_folios is called. The THP bug bites when the starting offset passed to memfd_pin_folios is not huge page aligned. See the commit messages for details. This patch (of 5): memfd_pin_folios on memory backed by THP panics if the requested start offset is not huge page aligned: BUG: kernel NULL pointer dereference, address: 0000000000000036 RIP: 0010:filemap_get_folios_contig+0xdf/0x290 RSP: 0018:ffffc9002092fbe8 EFLAGS: 00010202 RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000002 The fault occurs here, because xas_load returns a folio with value 2: filemap_get_folios_contig() for (folio = xas_load(&xas); folio && xas.xa_index <= end; folio = xas_next(&xas)) { ... if (!folio_try_get(folio)) <-- BOOM "2" is an xarray sibling entry. We get it because memfd_pin_folios does not round the indices passed to filemap_get_folios_contig to huge page boundaries for THP, so we load from the middle of a huge page range see a sibling. (It does round for hugetlbfs, at the is_file_hugepages test). To fix, if the folio is a sibling, then return the next index as the starting point for the next call to filemap_get_folios_contig. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix memfd_pin_folios alloc race panic If memfd_pin_folios tries to create a hugetlb page, but someone else already did, then folio gets the value -EEXIST here: folio = memfd_alloc_folio(memfd, start_idx); if (IS_ERR(folio)) { ret = PTR_ERR(folio); if (ret != -EEXIST) goto err; then on the next trip through the "while start_idx" loop we panic here: if (folio) { folio_put(folio); To fix, set the folio to NULL on error. | 4.7 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Input: adp5589-keys - fix NULL pointer dereference We register a devm action to call adp5589_clear_config() and then pass the i2c client as argument so that we can call i2c_get_clientdata() in order to get our device object. However, i2c_set_clientdata() is only being set at the end of the probe function which means that we'll get a NULL pointer dereference in case the probe function fails early. | 5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix dentry leak in cachefiles_open_file()
A dentry leak may be caused when a lookup cookie and a cull are concurrent:
P1 | P2
-----------------------------------------------------------
cachefiles_lookup_cookie
cachefiles_look_up_object
lookup_one_positive_unlocked
// get dentry
cachefiles_cull
inode->i_flags |= S_KERNEL_FILE;
cachefiles_open_file
cachefiles_mark_inode_in_use
__cachefiles_mark_inode_in_use
can_use = false
if (!(inode->i_flags & S_KERNEL_FILE))
can_use = true
return false
return false
// Returns an error but doesn't put dentry
After that the following WARNING will be triggered when the backend folder
is umounted:
==================================================================
BUG: Dentry 000000008ad87947{i=7a,n=Dx_1_1.img} still in use (1) [unmount of ext4 sda]
WARNING: CPU: 4 PID: 359261 at fs/dcache.c:1767 umount_check+0x5d/0x70
CPU: 4 PID: 359261 Comm: umount Not tainted 6.6.0-dirty #25
RIP: 0010:umount_check+0x5d/0x70
Call Trace:
|
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: send: fix buffer overflow detection when copying path to cache entry
Starting with commit c0247d289e73 ("btrfs: send: annotate struct
name_cache_entry with __counted_by()") we annotated the variable length
array "name" from the name_cache_entry structure with __counted_by() to
improve overflow detection. However that alone was not correct, because
the length of that array does not match the "name_len" field - it matches
that plus 1 to include the NUL string terminator, so that makes a
fortified kernel think there's an overflow and report a splat like this:
strcpy: detected buffer overflow: 20 byte write of buffer size 19
WARNING: CPU: 3 PID: 3310 at __fortify_report+0x45/0x50
CPU: 3 UID: 0 PID: 3310 Comm: btrfs Not tainted 6.11.0-prnet #1
Hardware name: CompuLab Ltd. sbc-ihsw/Intense-PC2 (IPC2), BIOS IPC2_3.330.7 X64 03/15/2018
RIP: 0010:__fortify_report+0x45/0x50
Code: 48 8b 34 (...)
RSP: 0018:ffff97ebc0d6f650 EFLAGS: 00010246
RAX: 7749924ef60fa600 RBX: ffff8bf5446a521a RCX: 0000000000000027
RDX: 00000000ffffdfff RSI: ffff97ebc0d6f548 RDI: ffff8bf84e7a1cc8
RBP: ffff8bf548574080 R08: ffffffffa8c40e10 R09: 0000000000005ffd
R10: 0000000000000004 R11: ffffffffa8c70e10 R12: ffff8bf551eef400
R13: 0000000000000000 R14: 0000000000000013 R15: 00000000000003a8
FS: 00007fae144de8c0(0000) GS:ffff8bf84e780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fae14691690 CR3: 00000001027a2003 CR4: 00000000001706f0
Call Trace:
|
7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix a NULL pointer dereference when failed to start a new trasacntion
[BUG]
Syzbot reported a NULL pointer dereference with the following crash:
FAULT_INJECTION: forcing a failure.
start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676
prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642
relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678
...
BTRFS info (device loop0): balance: ended with status: -12
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667]
RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926
Call Trace:
|
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
btrfs: wait for fixup workers before stopping cleaner kthread during umount
During unmount, at close_ctree(), we have the following steps in this order:
1) Park the cleaner kthread - this doesn't destroy the kthread, it basically
halts its execution (wake ups against it work but do nothing);
2) We stop the cleaner kthread - this results in freeing the respective
struct task_struct;
3) We call btrfs_stop_all_workers() which waits for any jobs running in all
the work queues and then free the work queues.
Syzbot reported a case where a fixup worker resulted in a crash when doing
a delayed iput on its inode while attempting to wake up the cleaner at
btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread
was already freed. This can happen during unmount because we don't wait
for any fixup workers still running before we call kthread_stop() against
the cleaner kthread, which stops and free all its resources.
Fix this by waiting for any fixup workers at close_ctree() before we call
kthread_stop() against the cleaner and run pending delayed iputs.
The stack traces reported by syzbot were the following:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065
Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: btrfs-fixup btrfs_work_helper
Call Trace:
|
5.5 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
tracing/timerlat: Fix a race during cpuhp processing
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
|
4.7 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: move xa_alloc to prevent UAF Evil user can guess the next id of the vm before the ioctl completes and then call vm destroy ioctl to trigger UAF since create ioctl is still referencing the same vm. Move the xa_alloc all the way to the end to prevent this. v2: - Rebase (cherry picked from commit dcfd3971327f3ee92765154baebbaece833d3ca9) | 7.8 |
High |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix a race between socket set up and I/O thread creation In rxrpc_open_socket(), it sets up the socket and then sets up the I/O thread that will handle it. This is a problem, however, as there's a gap between the two phases in which a packet may come into rxrpc_encap_rcv() from the UDP packet but we oops when trying to wake the not-yet created I/O thread. As a quick fix, just make rxrpc_encap_rcv() discard the packet if there's no I/O thread yet. A better, but more intrusive fix would perhaps be to rearrange things such that the socket creation is done by the I/O thread. | 4.7 |
Medium |
|
18h01 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
vhost/scsi: null-ptr-dereference in vhost_scsi_get_req()
Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code
from control queue handler") a null pointer dereference bug can be
triggered when guest sends an SCSI AN request.
In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with
`&v_req.tmf.lun[1]` within a switch-case block and is then passed to
vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for
a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is
set to NULL in this branch. Later, in vhost_scsi_get_req(),
`vc->target` is dereferenced without being checked, leading to a null
pointer dereference bug. This bug can be triggered from guest.
When this bug occurs, the vhost_worker process is killed while holding
`vq->mutex` and the corresponding tpg will remain occupied
indefinitely.
Below is the KASAN report:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS
1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vhost_scsi_get_req+0x165/0x3a0
Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6
04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00
RSP: 0018:ffff888017affb50 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8
RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000
FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0
Call Trace:
|
5.5 |
Medium |
|
12h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: Fix off by one in get_rpi() The rp->priv->rpi array is either rpi_msr or rpi_tpmi which have NR_RAPL_PRIMITIVES number of elements. Thus the > needs to be >= to prevent an off by one access. | 7.1 |
High |
|
12h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix helper writes to read-only maps
Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.
In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.
The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.
However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via * |
7.1 |
High |
|
12h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ACPI: sysfs: validate return type of _STR method Only buffer objects are valid return values of _STR. If something else is returned description_show() will access invalid memory. | 7.1 |
High |
|
12h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to check atomic_file in f2fs ioctl interfaces Some f2fs ioctl interfaces like f2fs_ioc_set_pin_file(), f2fs_move_file_range(), and f2fs_defragment_range() missed to check atomic_write status, which may cause potential race issue, fix it. | 4.7 |
Medium |
|
12h27 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption The TPM event log table is a Linux specific construct, where the data produced by the GetEventLog() boot service is cached in memory, and passed on to the OS using an EFI configuration table. The use of EFI_LOADER_DATA here results in the region being left unreserved in the E820 memory map constructed by the EFI stub, and this is the memory description that is passed on to the incoming kernel by kexec, which is therefore unaware that the region should be reserved. Even though the utility of the TPM2 event log after a kexec is questionable, any corruption might send the parsing code off into the weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY instead, which is always treated as reserved by the E820 conversion logic. | 5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: set the cipher for secured NDP ranging The cipher pointer is not set, but is derefereced trying to set its content, which leads to a NULL pointer dereference. Fix it by pointing to the cipher parameter before dereferencing. | 5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Fix deadlock in SGX NUMA node search When the current node doesn't have an EPC section configured by firmware and all other EPC sections are used up, CPU can get stuck inside the while loop that looks for an available EPC page from remote nodes indefinitely, leading to a soft lockup. Note how nid_of_current will never be equal to nid in that while loop because nid_of_current is not set in sgx_numa_mask. Also worth mentioning is that it's perfectly fine for the firmware not to setup an EPC section on a node. While setting up an EPC section on each node can enhance performance, it is not a requirement for functionality. Rework the loop to start and end on *a* node that has SGX memory. This avoids the deadlock looking for the current SGX-lacking node to show up in the loop when it never will. | 5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nbd: fix race between timeout and normal completion If request timetout is handled by nbd_requeue_cmd(), normal completion has to be stopped for avoiding to complete this requeued request, other use-after-free can be triggered. Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime make sure that cmd->lock is grabbed for clearing the flag and the requeue. | 7 |
High |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for accessing waker_bfqq after splitting After commit 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()"), if the current procress is the last holder of bfqq, the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq may in the merge chain of bfqq, hence just recored waker_bfqq is still not safe. Fix the problem by adding a helper bfq_waker_bfqq() to check if bfqq->waker_bfqq is in the merge chain, and current procress is the only holder. | 7.8 |
High |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix double free in OPTEE transport Channels can be shared between protocols, avoid freeing the same channel descriptors twice when unloading the stack. | 7.8 |
High |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del() The kref_put() function will call nport->release if the refcount drops to zero. The nport->release release function is _efc_nport_free() which frees "nport". But then we dereference "nport" on the next line which is a use after free. Re-order these lines to avoid the use after free. | 7.8 |
High |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tpm: Clean up TPM space after command failure tpm_dev_transmit prepares the TPM space before attempting command transmission. However if the command fails no rollback of this preparation is done. This can result in transient handles being leaked if the device is subsequently closed with no further commands performed. Fix this by flushing the space in the event of command transmission failure. | 5.5 |
Medium |
|
12h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: correctly handle malformed BPF_CORE_TYPE_ID_LOCAL relos In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL referencing a non-existing BTF type, function bpf_core_calc_relo_insn would cause a null pointer deference. Fix this by adding a proper check upper in call stack, as malformed relocation records could be passed from user space. Simplest reproducer is a program: r0 = 0 exit With a single relocation record: .insn_off = 0, /* patch first instruction */ .type_id = 100500, /* this type id does not exist */ .access_str_off = 6, /* offset of string "0" */ .kind = BPF_CORE_TYPE_ID_LOCAL, See the link for original reproducer or next commit for a test case. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential oob read in nilfs_btree_check_delete() The function nilfs_btree_check_delete(), which checks whether degeneration to direct mapping occurs before deleting a b-tree entry, causes memory access outside the block buffer when retrieving the maximum key if the root node has no entries. This does not usually happen because b-tree mappings with 0 child nodes are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen if the b-tree root node read from a device is configured that way, so fix this potential issue by adding a check for that case. | 7.1 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Fix if-statement expression in ks_pcie_quirk() This code accidentally uses && where || was intended. It potentially results in a NULL dereference. Thus, fix the if-statement expression to use the correct condition. [kwilczynski: commit log] | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix H264 multi stateless decoder smatch warning Fix a smatch static checker warning on vdec_h264_req_multi_if.c. Which leads to a kernel crash when fb is NULL. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix VP8 stateless decoder smatch warning Fix a smatch static checker warning on vdec_vp8_req_if.c. Which leads to a kernel crash when fb is NULL. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix H264 stateless decoder smatch warning Fix a smatch static checker warning on vdec_h264_req_if.c. Which leads to a kernel crash when fb is NULL. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: PCI: kirin: Fix buffer overflow in kirin_pcie_parse_port() Within kirin_pcie_parse_port(), the pcie->num_slots is compared to pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead to an overflow. Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move pcie->num_slots increment below the if-statement to avoid out-of-bounds array access. Found by Linux Verification Center (linuxtesting.org) with SVACE. [kwilczynski: commit log] | 7.8 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix Use-After-Free of rsv_qp on HIP08 Currently rsv_qp is freed before ib_unregister_device() is called on HIP08. During the time interval, users can still dereg MR and rsv_qp will be used in this process, leading to a UAF. Move the release of rsv_qp after calling ib_unregister_device() to fix it. | 7.8 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Added NULL check for lookup_atid The lookup_atid() function can return NULL if the ATID is invalid or does not exist in the identifier table, which could lead to dereferencing a null pointer without a check in the `act_establish()` and `act_open_rpl()` functions. Add a NULL check to prevent null pointer dereferencing. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: assign irq bypass producer token correctly We used to call irq_bypass_unregister_producer() in vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the token pointer is still valid or not. Actually, we use the eventfd_ctx as the token so the life cycle of the token should be bound to the VHOST_SET_VRING_CALL instead of vhost_vdpa_setup_vq_irq() which could be called by set_status(). Fixing this by setting up irq bypass producer's token when handling VHOST_SET_VRING_CALL and un-registering the producer before calling vhost_vring_ioctl() to prevent a possible use after free as eventfd could have been released in vhost_vring_ioctl(). And such registering and unregistering will only be done if DRIVER_OK is set. | 7.8 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove. | 7 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set This may be a typo. The comment has said shared locks are not allowed when this bit is set. If using shared lock, the wait in `fuse_file_cached_io_open` may be forever. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm: call the security_mmap_file() LSM hook in remap_file_pages() The remap_file_pages syscall handler calls do_mmap() directly, which doesn't contain the LSM security check. And if the process has called personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for RW pages, this will actually result in remapping the pages to RWX, bypassing a W^X policy enforced by SELinux. So we should check prot by security_mmap_file LSM hook in the remap_file_pages syscall handler before do_mmap() is called. Otherwise, it potentially permits an attacker to bypass a W^X policy enforced by SELinux. The bypass is similar to CVE-2016-10044, which bypass the same thing via AIO and can be found in [1]. The PoC: $ cat > test.c int main(void) { size_t pagesz = sysconf(_SC_PAGE_SIZE); int mfd = syscall(SYS_memfd_create, "test", 0); const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE, MAP_SHARED, mfd, 0); unsigned int old = syscall(SYS_personality, 0xffffffff); syscall(SYS_personality, READ_IMPLIES_EXEC | old); syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0); syscall(SYS_personality, old); // show the RWX page exists even if W^X policy is enforced int fd = open("/proc/self/maps", O_RDONLY); unsigned char buf2[1024]; while (1) { int ret = read(fd, buf2, 1024); if (ret <= 0) break; write(1, buf2, ret); } close(fd); } $ gcc test.c -o test $ ./test | grep rwx 7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted) [PM: subject line tweaks] | 7.8 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 ---truncated--- | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: KEYS: prevent NULL pointer dereference in find_asymmetric_key() In find_asymmetric_key(), if all NULLs are passed in the id_{0,1,2} arguments, the kernel will first emit WARN but then have an oops because id_2 gets dereferenced anyway. Add the missing id_2 check and move WARN_ON() to the final else branch to avoid duplicate NULL checks. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Block path traversal Most firmware names are hardcoded strings, or are constructed from fairly constrained format strings where the dynamic parts are just some hex numbers or such. However, there are a couple codepaths in the kernel where firmware file names contain string components that are passed through from a device or semi-privileged userspace; the ones I could find (not counting interfaces that require root privileges) are: - lpfc_sli4_request_firmware_update() seems to construct the firmware filename from "ModelName", a string that was previously parsed out of some descriptor ("Vital Product Data") in lpfc_fill_vpd() - nfp_net_fw_find() seems to construct a firmware filename from a model name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I think parses some descriptor that was read from the device. (But this case likely isn't exploitable because the format string looks like "netronome/nic_%s", and there shouldn't be any *folders* starting with "netronome/nic_". The previous case was different because there, the "%s" is *at the start* of the format string.) - module_flash_fw_schedule() is reachable from the ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is enough to pass the privilege check), and takes a userspace-provided firmware name. (But I think to reach this case, you need to have CAP_NET_ADMIN over a network namespace that a special kind of ethernet device is mapped into, so I think this is not a viable attack path in practice.) Fix it by rejecting any firmware names containing ".." path components. For what it's worth, I went looking and haven't found any USB device drivers that use the firmware loader dangerously. | 7.8 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race setting file private on concurrent lseek using same fd When doing concurrent lseek(2) system calls against the same file descriptor, using multiple threads belonging to the same process, we have a short time window where a race happens and can result in a memory leak. The race happens like this: 1) A program opens a file descriptor for a file and then spawns two threads (with the pthreads library for example), lets call them task A and task B; 2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at file.c:find_desired_extent() while holding a read lock on the inode; 3) At the start of find_desired_extent(), it extracts the file's private_data pointer into a local variable named 'private', which has a value of NULL; 4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode in shared mode and enters file.c:find_desired_extent(), where it also extracts file->private_data into its local variable 'private', which has a NULL value; 5) Because it saw a NULL file private, task A allocates a private structure and assigns to the file structure; 6) Task B also saw a NULL file private so it also allocates its own file private and then assigns it to the same file structure, since both tasks are using the same file descriptor. At this point we leak the private structure allocated by task A. Besides the memory leak, there's also the detail that both tasks end up using the same cached state record in the private structure (struct btrfs_file_private::llseek_cached_state), which can result in a use-after-free problem since one task can free it while the other is still using it (only one task took a reference count on it). Also, sharing the cached state is not a good idea since it could result in incorrect results in the future - right now it should not be a problem because it end ups being used only in extent-io-tree.c:count_range_bits() where we do range validation before using the cached state. Fix this by protecting the private assignment and check of a file while holding the inode's spinlock and keep track of the task that allocated the private, so that it's used only by that task in order to prevent user-after-free issues with the cached state record as well as potentially using it incorrectly in the future. | 7 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: padata: use integer wrap around to prevent deadlock on seq_nr overflow When submitting more than 2^32 padata objects to padata_do_serial, the current sorting implementation incorrectly sorts padata objects with overflowed seq_nr, causing them to be placed before existing objects in the reorder list. This leads to a deadlock in the serialization process as padata_find_next cannot match padata->seq_nr and pd->processed because the padata instance with overflowed seq_nr will be selected next. To fix this, we use an unsigned integer wrap around to correctly sort padata objects in scenarios with integer overflow. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't use rate mask for offchannel TX either Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for scanning"), ignore incorrect settings to avoid no supported rate warning reported by syzbot. The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band"), which however corrects bitmask of HE MCS and recognizes correctly settings of empty legacy rate plus HE MCS rate instead of returning -EINVAL. As suggestions [1], follow the change of SCAN TX to consider this case of offchannel TX as well. [1] https://lore.kernel.org/linux-wireless/[email protected]/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024 | 3.3 |
Low |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
nfsd: call cache_put if xdr_reserve_space returns NULL
If not enough buffer space available, but idmap_lookup has triggered
lookup_fn which calls cache_get and returns successfully. Then we
missed to call cache_put here which pairs with cache_get.
Reviwed-by: Jeff Layton |
5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: erofs: handle overlapped pclusters out of crafted images properly syzbot reported a task hang issue due to a deadlock case where it is waiting for the folio lock of a cached folio that will be used for cache I/Os. After looking into the crafted fuzzed image, I found it's formed with several overlapped big pclusters as below: Ext: logical offset | length : physical offset | length 0: 0.. 16384 | 16384 : 151552.. 167936 | 16384 1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384 2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384 ... Here, extent 0/1 are physically overlapped although it's entirely _impossible_ for normal filesystem images generated by mkfs. First, managed folios containing compressed data will be marked as up-to-date and then unlocked immediately (unlike in-place folios) when compressed I/Os are complete. If physical blocks are not submitted in the incremental order, there should be separate BIOs to avoid dependency issues. However, the current code mis-arranges z_erofs_fill_bio_vec() and BIO submission which causes unexpected BIO waits. Second, managed folios will be connected to their own pclusters for efficient inter-queries. However, this is somewhat hard to implement easily if overlapped big pclusters exist. Again, these only appear in fuzzed images so let's simply fall back to temporary short-lived pages for correctness. Additionally, it justifies that referenced managed folios cannot be truncated for now and reverts part of commit 2080ca1ed3e4 ("erofs: tidy up `struct z_erofs_bvec`") for simplicity although it shouldn't be any difference. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix spin_unlock_irqrestore() called with IRQs enabled Fix missuse of spin_lock_irq()/spin_unlock_irq() when spin_lock_irqsave()/spin_lock_irqrestore() was hold. This was discovered through the lock debugging, and the corresponding log is as follows: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 96 PID: 2074 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 _raw_spin_unlock_irqrestore+0x84/0xc8 add_qp_to_list+0x11c/0x148 [hns_roce_hw_v2] hns_roce_create_qp_common.constprop.0+0x240/0x780 [hns_roce_hw_v2] hns_roce_create_qp+0x98/0x160 [hns_roce_hw_v2] create_qp+0x138/0x258 ib_create_qp_kernel+0x50/0xe8 create_mad_qp+0xa8/0x128 ib_mad_port_open+0x218/0x448 ib_mad_init_device+0x70/0x1f8 add_client_context+0xfc/0x220 enable_device_and_get+0xd0/0x140 ib_register_device.part.0+0xf4/0x1c8 ib_register_device+0x34/0x50 hns_roce_register_device+0x174/0x3d0 [hns_roce_hw_v2] hns_roce_init+0xfc/0x2c0 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x7c/0x1d0 [hns_roce_hw_v2] hns_roce_hw_v2_init_instance+0x9c/0x180 [hns_roce_hw_v2] | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave() syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce this[1], one bond device (bond1) has xdpdrv, which increases bpf_master_redirect_enabled_key. Another bond device (bond0) which is unsupported by XDP but its slave (veth3) has xdpgeneric that returns XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect(). To reduce unnecessary warnings and improve log management, we need to delete the WARN_ON_ONCE() and add ratelimit to the netdev_err(). [1] Steps to reproduce: # Needs tx_xdp with return XDP_TX; ip l add veth0 type veth peer veth1 ip l add veth3 type veth peer veth4 ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default ip l set veth0 master bond1 ip l set bond1 up # Increases bpf_master_redirect_enabled_key ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx ip l set veth3 master bond0 ip l set bond0 up ip l set veth4 up # Triggers WARN_ON_ONCE() from the xdp_master_redirect() ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
netfs: Delete subtree of 'fs/netfs' when netfs module exits
In netfs_init() or fscache_proc_init(), we create dentry under 'fs/netfs',
but in netfs_exit(), we only delete the proc entry of 'fs/netfs' without
deleting its subtree. This triggers the following WARNING:
==================================================================
remove_proc_entry: removing non-empty directory 'fs/netfs', leaking at least 'requests'
WARNING: CPU: 4 PID: 566 at fs/proc/generic.c:717 remove_proc_entry+0x160/0x1c0
Modules linked in: netfs(-)
CPU: 4 UID: 0 PID: 566 Comm: rmmod Not tainted 6.11.0-rc3 #860
RIP: 0010:remove_proc_entry+0x160/0x1c0
Call Trace:
|
5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix potential use after free bug The free_device_compression_mode(iaa_device, device_mode) function frees "device_mode" but it iss passed to iaa_compression_modes[i]->free() a few lines later resulting in a use after free. The good news is that, so far as I can tell, nothing implements the ->free() function and the use after free happens in dead code. But, with this fix, when something does implement it, we'll be ready. :) | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drivers/perf: Fix ali_drw_pmu driver interrupt status clearing The alibaba_uncore_pmu driver forgot to clear all interrupt status in the interrupt processing function. After the PMU counter overflow interrupt occurred, an interrupt storm occurred, causing the system to hang. Therefore, clear the correct interrupt status in the interrupt handling function to fix it. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - inject error before stopping queue The master ooo cannot be completely closed when the accelerator core reports memory error. Therefore, the driver needs to inject the qm error to close the master ooo. Currently, the qm error is injected after stopping queue, memory may be released immediately after stopping queue, causing the device to access the released memory. Therefore, error is injected to close master ooo before stopping queue to ensure that the device does not access the released memory. | 7.8 |
High |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use reserved copy engine for user binds on faulting devices User binds map to engines with can fault, faults depend on user binds completion, thus we can deadlock. Avoid this by using reserved copy engine for user binds on faulting devices. While we are here, normalize bind queue creation with a helper. v2: - Pass in extensions to bind queue creation (CI) v3: - s/resevered/reserved (Lucas) - Fix NULL hwe check (Jonathan) | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input arguments, zero the value for the case of an error as otherwise it could leak memory. For tracing, it is not needed given CAP_PERFMON can already read all kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped in here. Also, the MTU helpers mtu_len pointer value is being written but also read. Technically, the MEM_UNINIT should not be there in order to always force init. Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now implies two things actually: i) write into memory, ii) memory does not have to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory, ii) memory must be initialized. This means that for bpf_*_check_mtu() we're readding the issue we're trying to fix, that is, it would then be able to write back into things like .rodata BPF maps. Follow-up work will rework the MEM_UNINIT semantics such that the intent can be better expressed. For now just clear the *mtu_len on error path which can be lifted later again. | 5.5 |
Medium |
|
12h14 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix "in-kernel MMIO" check TDX only supports kernel-initiated MMIO operations. The handle_mmio() function checks if the #VE exception occurred in the kernel and rejects the operation if it did not. However, userspace can deceive the kernel into performing MMIO on its behalf. For example, if userspace can point a syscall to an MMIO address, syscall does get_user() or put_user() on it, triggering MMIO #VE. The kernel will treat the #VE as in-kernel MMIO. Ensure that the target MMIO address is within the kernel before decoding instruction. | 7.8 |
High |
|
12h13 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to wait dio completion It should wait all existing dio write IOs before block removal, otherwise, previous direct write IO may overwrite data in the block which may be reused by other inode. | 6.5 |
Medium |
|
12h13 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: use work queue to process beacon tx event Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template") from Feb 28, 2024 (linux-next), leads to the following Smatch static checker warning: drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie() warn: sleeping in atomic context The reason is that ath11k_bcn_tx_status_event() will directly call might sleep function ath11k_wmi_cmd_send() during RCU read-side critical sections. The call trace is like: ath11k_bcn_tx_status_event() -> rcu_read_lock() -> ath11k_mac_bcn_tx_event() -> ath11k_mac_setup_bcn_tmpl() …… -> ath11k_wmi_bcn_tmpl() -> ath11k_wmi_cmd_send() -> rcu_read_unlock() Commit 886433a98425 ("ath11k: add support for BSS color change") added the ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock to avoid warning but also introduced this BUG. Use work queue to avoid directly calling ath11k_mac_bcn_tx_event() during RCU critical sections. No need to worry about the deletion of vif because cancel_work_sync() will drop the work if it doesn't start or block vif deletion until the running work is done. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 | 5.5 |
Medium |
|
12h13 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: jfs: fix out-of-bounds in dbNextAG() and diAlloc() In dbNextAG() , there is no check for the case where bmp->db_numag is greater or same than MAXAG due to a polluted image, which causes an out-of-bounds. Therefore, a bounds check should be added in dbMount(). And in dbNextAG(), a check for the case where agpref is greater than bmp->db_numag should be added, so an out-of-bounds exception should be prevented. Additionally, a check for the case where agno is greater or same than MAXAG should be added in diAlloc() to prevent out-of-bounds. | 7.1 |
High |
|
12h13 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir() The debugfs_create_dir() function returns error pointers. It never returns NULL. So use IS_ERR() to check it. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't implemented, but driver expects number of handlers is NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by removing ID. Addresses-Coverity-ID: 1598775 ("Out-of-bounds read") | 7.1 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for set_output_gamma in dcn30_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn30_set_output_transfer_func function. Previously, set_output_gamma was being checked for nullity at line 386, but then it was being dereferenced without any nullity check at line 401. This could potentially lead to a null pointer dereference error if set_output_gamma is indeed null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a nullity check for set_output_gamma before the call to set_output_gamma at line 401. If set_output_gamma is null, we log an error message and do not call the function. This fix prevents a potential null pointer dereference error. drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func() error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c 373 bool dcn30_set_output_transfer_func(struct dc *dc, 374 struct pipe_ctx *pipe_ctx, 375 const struct dc_stream_state *stream) 376 { 377 int mpcc_id = pipe_ctx->plane_res.hubp->inst; 378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc; 379 const struct pwl_params *params = NULL; 380 bool ret = false; 381 382 /* program OGAM or 3DLUT only for the top pipe*/ 383 if (pipe_ctx->top_pipe == NULL) { 384 /*program rmu shaper and 3dlut in MPC*/ 385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream); 386 if (ret == false && mpc->funcs->set_output_gamma) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL 387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL) 388 params = &stream->out_transfer_func.pwl; 389 else if (pipe_ctx->stream->out_transfer_func.type == 390 TF_TYPE_DISTRIBUTED_POINTS && 391 cm3_helper_translate_curve_to_hw_format( 392 &stream->out_transfer_func, 393 &mpc->blender_params, false)) 394 params = &mpc->blender_params; 395 /* there are no ROM LUTs in OUTGAM */ 396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED) 397 BREAK_TO_DEBUGGER(); 398 } 399 } 400 --> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash 402 return ret; 403 } | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Protect against overflow of ALIGN() during iova allocation
Userspace can supply an iova and uptr such that the target iova alignment
becomes really big and ALIGN() overflows which corrupts the selected area
range during allocation. CONFIG_IOMMUFD_TEST can detect this:
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Modules linked in:
CPU: 1 PID: 5092 Comm: syz-executor294 Not tainted 6.10.0-rc5-syzkaller-00294-g3ffea9a7a6f7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
RIP: 0010:iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Code: fc e9 a4 f3 ff ff e8 1a 8b 4c fc 41 be e4 ff ff ff e9 8a f3 ff ff e8 0a 8b 4c fc 90 0f 0b 90 e9 37 f5 ff ff e8 fc 8a 4c fc 90 <0f> 0b 90 e9 68 f3 ff ff 48 c7 c1 ec 82 ad 8f 80 e1 07 80 c1 03 38
RSP: 0018:ffffc90003ebf9e0 EFLAGS: 00010293
RAX: ffffffff85499fa4 RBX: 00000000ffffffef RCX: ffff888079b49e00
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: ffffc90003ebfc50 R08: ffffffff85499b30 R09: ffffffff85499942
R10: 0000000000000002 R11: ffff888079b49e00 R12: ffff8880228e0010
R13: 0000000000000000 R14: 1ffff920007d7f68 R15: ffffc90003ebfd00
FS: 000055557d760380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 000000007404a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: always wait for both firmware loading attempts In 'rtw_wait_firmware_completion()', always wait for both (regular and wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()' has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue 'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually the wowlan one) is still in progress, causing UAF detected by KASAN. | 7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Don't zero-out PMU snapshot area before freeing data
With the latest Linux-6.11-rc3, the below NULL pointer crash is observed
when SBI PMU snapshot is enabled for the guest and the guest is forcefully
powered-off.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508
Oops [#1]
Modules linked in: kvm
CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3
Hardware name: riscv-virtio,qemu (DT)
epc : __kvm_write_guest_page+0x94/0xa6 [kvm]
ra : __kvm_write_guest_page+0x54/0xa6 [kvm]
epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0
gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000
t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0
s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086
a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0
a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc
s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000
s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000
s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001
s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3
t5 : ffffffff814126e0 t6 : ffffffff81412700
status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d
[ |
5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
Floating point instructions in userspace can crash some arm kernels
built with clang/LLD 17.0.6:
BUG: unsupported FP instruction in kernel mode
FPEXC == 0xc0000780
Internal error: Oops - undefined instruction: 0 [#1] ARM
CPU: 0 PID: 196 Comm: vfp-reproducer Not tainted 6.10.0 #1
Hardware name: BCM2835
PC is at vfp_support_entry+0xc8/0x2cc
LR is at do_undefinstr+0xa8/0x250
pc : [ |
5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix oops on non-dbdc mt7986 mt7915_band_config() sets band_idx = 1 on the main phy for mt7986 with MT7975_ONE_ADIE or MT7976_ONE_ADIE. Commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status") introduced a dereference of the phys array indirectly indexed by band_idx via wcid->phy_idx in mt76_wcid_cleanup(). This caused the following Oops on affected mt7986 devices: Unable to handle kernel read from unreadable memory at virtual address 0000000000000024 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000 [0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] SMP Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ... CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0 Hardware name: ZyXEL EX5700 (Telenor) (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mt76_wcid_cleanup+0x84/0x22c [mt76] lr : mt76_wcid_cleanup+0x64/0x22c [mt76] sp : ffffffc00a803700 x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00 x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001 x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8 x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000 x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0 x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000 x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28 x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000 x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024 Call trace: mt76_wcid_cleanup+0x84/0x22c [mt76] __mt76_sta_remove+0x70/0xbc [mt76] mt76_sta_state+0x8c/0x1a4 [mt76] mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e] drv_sta_state+0x144/0x274 [mac80211] sta_info_move_state+0x1cc/0x2a4 [mac80211] sta_set_sinfo+0xaf8/0xc24 [mac80211] sta_info_destroy_addr_bss+0x4c/0x6c [mac80211] ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211] cfg80211_check_station_change+0x1360/0x4710 [cfg80211] genl_family_rcv_msg_doit+0xb4/0x110 genl_rcv_msg+0xd0/0x1bc netlink_rcv_skb+0x58/0x120 genl_rcv+0x34/0x50 netlink_unicast+0x1f0/0x2ec netlink_sendmsg+0x198/0x3d0 ____sys_sendmsg+0x1b0/0x210 ___sys_sendmsg+0x80/0xf0 __sys_sendmsg+0x44/0xa0 __arm64_sys_sendmsg+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x40/0xd0 el0_svc+0x14/0x4c el0t_64_sync_handler+0x100/0x110 el0t_64_sync+0x15c/0x160 Code: d2800002 910092c0 52800023 f9800011 (885f7c01) ---[ end trace 7e42dd9a39ed2281 ]--- Fix by using mt76_dev_phy() which will map band_idx to the correct phy for all hardware combinations. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: use hweight16 to get correct tx antenna The chainmask is u16 so using hweight8 cannot get correct tx_ant. Without this patch, the tx_ant of band 2 would be -1 and lead to the following issue: BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e] | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() Since '__dev_queue_xmit()' should be called with interrupts enabled, the following backtrace: ieee80211_do_stop() ... spin_lock_irqsave(&local->queue_stop_reason_lock, flags) ... ieee80211_free_txskb() ieee80211_report_used_skb() ieee80211_report_ack_skb() cfg80211_mgmt_tx_status_ext() nl80211_frame_tx_status() genlmsg_multicast_netns() genlmsg_multicast_netns_filtered() nlmsg_multicast_filtered() netlink_broadcast_filtered() do_one_broadcast() netlink_broadcast_deliver() __netlink_sendskb() netlink_deliver_tap() __netlink_deliver_tap_skb() dev_queue_xmit() __dev_queue_xmit() ; with IRQS disabled ... spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags) issues the warning (as reported by syzbot reproducer): WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120 Fix this by implementing a two-phase skb reclamation in 'ieee80211_do_stop()', where actual work is performed outside of a section with interrupts disabled. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF value is now stored in a local variable `ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is then assigned using this local variable, ensuring that the TSF value is safely accessed. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Don't return OOB skb in manage_oob().
syzbot reported use-after-free in unix_stream_recv_urg(). [0]
The scenario is
1. send(MSG_OOB)
2. recv(MSG_OOB)
-> The consumed OOB remains in recv queue
3. send(MSG_OOB)
4. recv()
-> manage_oob() returns the next skb of the consumed OOB
-> This is also OOB, but unix_sk(sk)->oob_skb is not cleared
5. recv(MSG_OOB)
-> unix_sk(sk)->oob_skb is used but already freed
The recent commit 8594d9b85c07 ("af_unix: Don't call skb_get() for OOB
skb.") uncovered the issue.
If the OOB skb is consumed and the next skb is peeked in manage_oob(),
we still need to check if the skb is OOB.
Let's do so by falling back to the following checks in manage_oob()
and add the test case in selftest.
Note that we need to add a similar check for SIOCATMARK.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959
Read of size 4 at addr ffff8880326abcc4 by task syz-executor178/5235
CPU: 0 UID: 0 PID: 5235 Comm: syz-executor178 Not tainted 6.11.0-rc5-syzkaller-00742-gfbdaffe41adc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
|
7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: sock_map: Add a cond_resched() in sock_hash_free() Several syzbot soft lockup reports all have in common sock_hash_free() If a map with a large number of buckets is destroyed, we need to yield the cpu when needed. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().
syzbot reported a warning in bcm_release(). [0]
The blamed change fixed another warning that is triggered when
connect() is issued again for a socket whose connect()ed device has
been unregistered.
However, if the socket is just close()d without the 2nd connect(), the
remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry()
in bcm_release().
Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify().
[0]
name '4986'
WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711
Modules linked in:
CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711
Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07
RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246
RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a
R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640
R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netkit: Assign missing bpf_net_context During the introduction of struct bpf_net_context handling for XDP-redirect, the netkit driver has been missed, which also requires it because NETKIT_REDIRECT invokes skb_do_redirect() which is accessing the per-CPU variables. Otherwise we see the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000038 bpf_redirect() netkit_xmit() dev_hard_start_xmit() Set the bpf_net_context before invoking netkit_xmit() program within the netkit driver. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev()
Blamed commit accidentally removed a check for rt->rt6i_idev being NULL,
as spotted by syzbot:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 10998 Comm: syz-executor Not tainted 6.11.0-rc6-syzkaller-00208-g625403177711 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline]
RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914
Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06
RSP: 0018:ffffc900047374e0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0
RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c
R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18
R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930
FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix possible UAF for bfqq->bic with merge chain
1) initial state, three tasks:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| Λ | Λ | Λ
| | | | | |
V | V | V |
bfqq1 bfqq2 bfqq3
process ref: 1 1 1
2) bfqq1 merged to bfqq2:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| | | Λ
\--------------\| | |
V V |
bfqq1--------->bfqq2 bfqq3
process ref: 0 2 1
3) bfqq2 merged to bfqq3:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
here -> Λ | |
\--------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3
process ref: 0 1 3
In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then
get bfqq3 through merge chain, and finially handle IO by bfqq3.
Howerver, current code will think bfqq2 is owned by BIC1, like initial
state, and set bfqq2->bic to BIC1.
bfq_insert_request
-> by Process 1
bfqq = bfq_init_rq(rq)
bfqq = bfq_get_bfqq_handle_split
bfqq = bic_to_bfqq
-> get bfqq2 from BIC1
bfqq->ref++
rq->elv.priv[0] = bic
rq->elv.priv[1] = bfqq
if (bfqq_process_refs(bfqq) == 1)
bfqq->bic = bic
-> record BIC1 to bfqq2
__bfq_insert_request
new_bfqq = bfq_setup_cooperator
-> get bfqq3 from bfqq2->new_bfqq
bfqq_request_freed(bfqq)
new_bfqq->ref++
rq->elv.priv[1] = new_bfqq
-> handle IO by bfqq3
Fix the problem by checking bfqq is from merge chain fist. And this
might fix a following problem reported by our syzkaller(unreproducible):
==================================================================
BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595
CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_requeue_work
Call Trace:
|
5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: block: fix potential invalid pointer dereference in blk_add_partition The blk_add_partition() function initially used a single if-condition (IS_ERR(part)) to check for errors when adding a partition. This was modified to handle the specific case of -ENXIO separately, allowing the function to proceed without logging the error in this case. However, this change unintentionally left a path where md_autodetect_dev() could be called without confirming that part is a valid pointer. This commit separates the error handling logic by splitting the initial if-condition, improving code readability and handling specific error scenarios explicitly. The function now distinguishes the general error case from -ENXIO without altering the existing behavior of md_autodetect_dev() calls. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check link_res->hpo_dp_link_enc before using it [WHAT & HOW] Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res without initializing hpo_dp_link_enc and it is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf, lsm: Add check for BPF LSM return value A bpf prog returning a positive number attached to file_alloc_security hook makes kernel panic. This happens because file system can not filter out the positive number returned by the LSM prog using IS_ERR, and misinterprets this positive number as a file pointer. Given that hook file_alloc_security never returned positive number before the introduction of BPF LSM, and other BPF LSM hooks may encounter similar issues, this patch adds LSM return value check in verifier, to ensure no unexpected value is returned. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fail verification for sign-extension of packet data/data_end/data_meta syzbot reported a kernel crash due to commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses"). The reason is due to sign-extension of 32-bit load for packet data/data_end/data_meta uapi field. The original code looks like: r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */ r0 = r2 r0 += 8 if r3 > r0 goto +1 ... Note that __sk_buff->data load has 32-bit sign extension. After verification and convert_ctx_accesses(), the final asm code looks like: r2 = *(u64 *)(r1 +208) r2 = (s32)r2 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 ... Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid which may cause runtime failure. Currently, in C code, typically we have void *data = (void *)(long)skb->data; void *data_end = (void *)(long)skb->data_end; ... and it will generate r2 = *(u64 *)(r1 +208) r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 If we allow sign-extension, void *data = (void *)(long)(int)skb->data; void *data_end = (void *)(long)skb->data_end; ... the generated code looks like r2 = *(u64 *)(r1 +208) r2 <<= 32 r2 s>>= 32 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 and this will cause verification failure since "r2 <<= 32" is not allowed as "r2" is a packet pointer. To fix this issue for case r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ this patch added additional checking in is_valid_access() callback function for packet data/data_end/data_meta access. If those accesses are with sign-extenstion, the verification will fail. [1] https://lore.kernel.org/bpf/[email protected]/ | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid OOB when system.data xattr changes underneath the filesystem
When looking up for an entry in an inlined directory, if e_value_offs is
changed underneath the filesystem by some change in the block device, it
will lead to an out-of-bounds access that KASAN detects as an UAF.
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
loop0: detected capacity change from 2048 to 2047
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103
CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
|
7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ext4: check stripe size compatibility on remount as well We disable stripe size in __ext4_fill_super if it is not a multiple of the cluster ratio however this check is missed when trying to remount. This can leave us with cases where stripe < cluster_ratio after remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some unforeseen bugs like divide by 0. Fix that by adding the check in remount path as well. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() Patch series "nilfs2: fix potential issues with empty b-tree nodes". This series addresses three potential issues with empty b-tree nodes that can occur with corrupted filesystem images, including one recently discovered by syzbot. This patch (of 3): If a b-tree is broken on the device, and the b-tree height is greater than 2 (the level of the root node is greater than 1) even if the number of child nodes of the b-tree root is 0, a NULL pointer dereference occurs in nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert(). This is because, when the number of child nodes of the b-tree root is 0, nilfs_btree_do_lookup() does not set the block buffer head in any of path[x].bp_bh, leaving it as the initial value of NULL, but if the level of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(), which accesses the buffer memory of path[x].bp_bh, is called. Fix this issue by adding a check to nilfs_btree_root_broken(), which performs sanity checks when reading the root node from the device, to detect this inconsistency. Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause early on. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] | 7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error Ensure index in rtl2830_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. | 7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency
In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to
destroying CM IDs"), the function flush_workqueue is invoked to flush the
work queue iwcm_wq.
But at that time, the work queue iwcm_wq was created via the function
alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM.
Because the current process is trying to flush the whole iwcm_wq, if
iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current
process is not reclaiming memory or running on a workqueue which doesn't
have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee
leading to a deadlock.
The call trace is as below:
[ 125.350876][ T1430] Call Trace:
[ 125.356281][ T1430] |
7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Reset cid to con_num - 1 to stay in bounds In the function init_conns(), after the create_con() and create_cm() for loop if something fails. In the cleanup for loop after the destroy tag, we access out of bound memory because cid is set to clt_path->s.con_num. This commits resets the cid to clt_path->s.con_num - 1, to stay in bounds in the cleanup loop later. | 7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix UMR pd cleanup on error flow of driver init
The cited commit moves the pd allocation from function
mlx5r_umr_resource_cleanup() to a new function mlx5r_umr_cleanup().
So the fix in commit [1] is broken. In error flow, will hit panic [2].
Fix it by checking pd pointer to avoid panic if it is NULL;
[1] RDMA/mlx5: Fix UMR cleanup on error flow of driver init
[2]
[ 347.567063] infiniband mlx5_0: Couldn't register device with driver model
[ 347.591382] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 347.593438] #PF: supervisor read access in kernel mode
[ 347.595176] #PF: error_code(0x0000) - not-present page
[ 347.596962] PGD 0 P4D 0
[ 347.601361] RIP: 0010:ib_dealloc_pd_user+0x12/0xc0 [ib_core]
[ 347.604171] RSP: 0018:ffff888106293b10 EFLAGS: 00010282
[ 347.604834] RAX: 0000000000000000 RBX: 000000000000000e RCX: 0000000000000000
[ 347.605672] RDX: ffff888106293ad0 RSI: 0000000000000000 RDI: 0000000000000000
[ 347.606529] RBP: 0000000000000000 R08: ffff888106293ae0 R09: ffff888106293ae0
[ 347.607379] R10: 0000000000000a06 R11: 0000000000000000 R12: 0000000000000000
[ 347.608224] R13: ffffffffa0704dc0 R14: 0000000000000001 R15: 0000000000000001
[ 347.609067] FS: 00007fdc720cd9c0(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000
[ 347.610094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 347.610727] CR2: 0000000000000020 CR3: 0000000103012003 CR4: 0000000000370eb0
[ 347.611421] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 347.612113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 347.612804] Call Trace:
[ 347.613130] |
5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
IB/core: Fix ib_cache_setup_one error flow cleanup
When ib_cache_update return an error, we exit ib_cache_setup_one
instantly with no proper cleanup, even though before this we had
already successfully done gid_table_setup_one, that results in
the kernel WARN below.
Do proper cleanup using gid_table_cleanup_one before returning
the err in order to fix the issue.
WARNING: CPU: 4 PID: 922 at drivers/infiniband/core/cache.c:806 gid_table_release_one+0x181/0x1a0
Modules linked in:
CPU: 4 UID: 0 PID: 922 Comm: c_repro Not tainted 6.11.0-rc1+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:gid_table_release_one+0x181/0x1a0
Code: 44 8b 38 75 0c e8 2f cb 34 ff 4d 8b b5 28 05 00 00 e8 23 cb 34 ff 44 89 f9 89 da 4c 89 f6 48 c7 c7 d0 58 14 83 e8 4f de 21 ff <0f> 0b 4c 8b 75 30 e9 54 ff ff ff 48 8 3 c4 10 5b 5d 41 5c 41 5d 41
RSP: 0018:ffffc90002b835b0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c8527
RDX: 0000000000000000 RSI: ffffffff811c8534 RDI: 0000000000000001
RBP: ffff8881011b3d00 R08: ffff88810b3abe00 R09: 205d303839303631
R10: 666572207972746e R11: 72746e6520444947 R12: 0000000000000001
R13: ffff888106390000 R14: ffff8881011f2110 R15: 0000000000000001
FS: 00007fecc3b70800(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000340 CR3: 000000010435a001 CR4: 00000000003706b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
|
6.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfsd: return -EINVAL when namelen is 0 When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may result in namelen being 0, which will cause memdup_user() to return ZERO_SIZE_PTR. When we access the name.data that has been assigned the value of ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is triggered. [ T1205] ================================================================== [ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260 [ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205 [ T1205] [ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406 [ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ T1205] Call Trace: [ T1205] dump_stack+0x9a/0xd0 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] __kasan_report.cold+0x34/0x84 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] kasan_report+0x3a/0x50 [ T1205] nfs4_client_to_reclaim+0xe9/0x260 [ T1205] ? nfsd4_release_lockowner+0x410/0x410 [ T1205] cld_pipe_downcall+0x5ca/0x760 [ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0 [ T1205] ? down_write_killable_nested+0x170/0x170 [ T1205] ? avc_policy_seqno+0x28/0x40 [ T1205] ? selinux_file_permission+0x1b4/0x1e0 [ T1205] rpc_pipe_write+0x84/0xb0 [ T1205] vfs_write+0x143/0x520 [ T1205] ksys_write+0xc9/0x170 [ T1205] ? __ia32_sys_read+0x50/0x50 [ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110 [ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110 [ T1205] do_syscall_64+0x33/0x40 [ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1 [ T1205] RIP: 0033:0x7fdbdb761bc7 [ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514 [ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7 [ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008 [ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001 [ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b [ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000 [ T1205] ================================================================== Fix it by checking namelen. | 6.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread() syzbot reports a f2fs bug as below: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_report+0xe8/0x550 mm/kasan/report.c:491 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:252 [inline] __refcount_add include/linux/refcount.h:184 [inline] __refcount_inc include/linux/refcount.h:241 [inline] refcount_inc include/linux/refcount.h:258 [inline] get_task_struct include/linux/sched/task.h:118 [inline] kthread_stop+0xca/0x630 kernel/kthread.c:704 f2fs_stop_gc_thread+0x65/0xb0 fs/f2fs/gc.c:210 f2fs_do_shutdown+0x192/0x540 fs/f2fs/file.c:2283 f2fs_ioc_shutdown fs/f2fs/file.c:2325 [inline] __f2fs_ioctl+0x443a/0xbe60 fs/f2fs/file.c:4325 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is below race condition, it may cause use-after-free issue in sbi->gc_th pointer. - remount - f2fs_remount - f2fs_stop_gc_thread - kfree(gc_th) - f2fs_ioc_shutdown - f2fs_do_shutdown - f2fs_stop_gc_thread - kthread_stop(gc_th->f2fs_gc_task) : sbi->gc_thread = NULL; We will call f2fs_do_shutdown() in two paths: - for f2fs_ioc_shutdown() path, we should grab sb->s_umount semaphore for fixing. - for f2fs_shutdown() path, it's safe since caller has already grabbed sb->s_umount semaphore. | 7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: get rid of online repaire on corrupted directory syzbot reports a f2fs bug as below: kernel BUG at fs/f2fs/inode.c:896! RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896 Call Trace: evict+0x532/0x950 fs/inode.c:704 dispose_list fs/inode.c:747 [inline] evict_inodes+0x5f9/0x690 fs/inode.c:797 generic_shutdown_super+0x9d/0x2d0 fs/super.c:627 kill_block_super+0x44/0x90 fs/super.c:1696 kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898 deactivate_locked_super+0xc4/0x130 fs/super.c:473 cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373 task_work_run+0x24f/0x310 kernel/task_work.c:228 ptrace_notify+0x2d2/0x380 kernel/signal.c:2402 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896 Online repaire on corrupted directory in f2fs_lookup() can generate dirty data/meta while racing w/ readonly remount, it may leave dirty inode after filesystem becomes readonly, however, checkpoint() will skips flushing dirty inode in a state of readonly mode, result in above panic. Let's get rid of online repaire in f2fs_lookup(), and leave the work to fsck.f2fs. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error() syzbot reports a f2fs bug as below: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 58 at kernel/rcu/sync.c:177 rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177 CPU: 1 UID: 0 PID: 58 Comm: kworker/1:2 Not tainted 6.10.0-syzkaller-12562-g1722389b0d86 #0 Workqueue: events destroy_super_work RIP: 0010:rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177 Call Trace: percpu_free_rwsem+0x41/0x80 kernel/locking/percpu-rwsem.c:42 destroy_super_work+0xec/0x130 fs/super.c:282 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 As Christian Brauner pointed out [1]: the root cause is f2fs sets SB_RDONLY flag in internal function, rather than setting the flag covered w/ sb->s_umount semaphore via remount procedure, then below race condition causes this bug: - freeze_super() - sb_wait_write(sb, SB_FREEZE_WRITE) - sb_wait_write(sb, SB_FREEZE_PAGEFAULT) - sb_wait_write(sb, SB_FREEZE_FS) - f2fs_handle_critical_error - sb->s_flags |= SB_RDONLY - thaw_super - thaw_super_locked - sb_rdonly() is true, so it skips sb_freeze_unlock(sb, SB_FREEZE_FS) - deactivate_locked_super Since f2fs has almost the same logic as ext4 [2] when handling critical error in filesystem if it mounts w/ errors=remount-ro option: - set CP_ERROR_FLAG flag which indicates filesystem is stopped - record errors to superblock - set SB_RDONLY falg Once we set CP_ERROR_FLAG flag, all writable interfaces can detect the flag and stop any further updates on filesystem. So, it is safe to not set SB_RDONLY flag, let's remove the logic and keep in line w/ ext4 [3]. [1] https://lore.kernel.org/all/20240729-himbeeren-funknetz-96e62f9c7aee@brauner [2] https://lore.kernel.org/all/20240729132721.hxih6ehigadqf7wx@quack3 [3] https://lore.kernel.org/linux-ext4/[email protected] | 5.3 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: driver core: Fix a potential null-ptr-deref in module_add_driver() Inject fault while probing of-fpga-region, if kasprintf() fails in module_add_driver(), the second sysfs_remove_link() in exit path will cause null-ptr-deref as below because kernfs_name_hash() will call strlen() with NULL driver_name. Fix it by releasing resources based on the exit path sequence. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000000] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: of_fpga_region(+) fpga_region fpga_bridge cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: of_fpga_region] CPU: 2 UID: 0 PID: 2036 Comm: modprobe Not tainted 6.11.0-rc2-g6a0e38264012 #295 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : strlen+0x24/0xb0 lr : kernfs_name_hash+0x1c/0xc4 sp : ffffffc081f97380 x29: ffffffc081f97380 x28: ffffffc081f97b90 x27: ffffff80c821c2a0 x26: ffffffedac0be418 x25: 0000000000000000 x24: ffffff80c09d2000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffffff8103f2e42 x14: 00000000f1f1f1f1 x13: 0000000000000004 x12: ffffffb01812d61d x11: 1ffffff01812d61c x10: ffffffb01812d61c x9 : dfffffc000000000 x8 : 0000004fe7ed29e4 x7 : ffffff80c096b0e7 x6 : 0000000000000001 x5 : ffffff80c096b0e0 x4 : 1ffffffdb990efa2 x3 : 0000000000000000 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000000 Call trace: strlen+0x24/0xb0 kernfs_name_hash+0x1c/0xc4 kernfs_find_ns+0x118/0x2e8 kernfs_remove_by_name_ns+0x80/0x100 sysfs_remove_link+0x74/0xa8 module_add_driver+0x278/0x394 bus_add_driver+0x1f0/0x43c driver_register+0xf4/0x3c0 __platform_driver_register+0x60/0x88 of_fpga_region_init+0x20/0x1000 [of_fpga_region] do_one_initcall+0x110/0x788 do_init_module+0x1dc/0x5c8 load_module+0x3c38/0x4cac init_module_from_file+0xd4/0x128 idempotent_init_module+0x2cc/0x528 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f2fbffe1 a90157f4 12000802 aa0003f5 (38e16861) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix invalid mr resource destroy Certain error paths from mlx5_vdpa_dev_add() can end up releasing mr resources which never got initialized in the first place. This patch adds the missing check in mlx5_vdpa_destroy_mr_resources() to block releasing non-initialized mr resources. Reference trace: mlx5_core 0000:08:00.2: mlx5_vdpa_dev_add:3274:(pid 2700) warning: No mac address provisioned? BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 140216067 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 8 PID: 2700 Comm: vdpa Kdump: loaded Not tainted 5.14.0-496.el9.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb] Code: [...] RSP: 0018:ff1c823ac23077f0 EFLAGS: 00010246 RAX: ffffffffc1a21a60 RBX: ffffffff899567a0 RCX: 0000000000000000 RDX: ffffffffffffffff RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff1bda1f7c21e800 R08: 0000000000000000 R09: ff1c823ac2307670 R10: ff1c823ac2307668 R11: ffffffff8a9e7b68 R12: 0000000000000000 R13: 0000000000000000 R14: ff1bda1f43e341a0 R15: 00000000ffffffea FS: 00007f56eba7c740(0000) GS:ff1bda269f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104d90001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa] ? __die_body.cold+0x8/0xd ? page_fault_oops+0x134/0x170 ? __irq_work_queue_local+0x2b/0xc0 ? irq_work_queue+0x2c/0x50 ? exc_page_fault+0x62/0x150 ? asm_exc_page_fault+0x22/0x30 ? __pfx_mlx5_vdpa_free+0x10/0x10 [mlx5_vdpa] ? vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb] mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x2d2/0x7a0 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x277/0x4c0 [vdpa] genl_family_rcv_msg_doit+0xd9/0x130 genl_family_rcv_msg+0x14d/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] ? _copy_to_user+0x1a/0x30 ? move_addr_to_user+0x4b/0xe0 genl_rcv_msg+0x47/0xa0 ? __import_iovec+0x46/0x150 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x245/0x370 netlink_sendmsg+0x206/0x440 __sys_sendto+0x1dc/0x1f0 ? do_read_fault+0x10c/0x1d0 ? do_pte_missing+0x10d/0x190 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x5c/0xf0 ? __count_memcg_events+0x4f/0xb0 ? mm_account_fault+0x6c/0x100 ? handle_mm_fault+0x116/0x270 ? do_user_addr_fault+0x1d6/0x6a0 ? do_syscall_64+0x6b/0xf0 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 entry_SYSCALL_64_after_hwframe+0x78/0x80 | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ep93xx: clock: Fix off by one in ep93xx_div_recalc_rate() The psc->div[] array has psc->num_div elements. These values come from when we call clk_hw_register_div(). It's adc_divisors and ARRAY_SIZE(adc_divisors)) and so on. So this condition needs to be >= instead of > to prevent an out of bounds read. | 7.1 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put() syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending garbage on the four reserved tcp bits (th->res1) Use skb_put_zero() to clear the whole TCP header, as done in nf_reject_ip_tcphdr_put() BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 do_softirq+0x9a/0x100 kernel/softirq.c:455 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143 tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679 inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750 __sys_connect_file net/socket.c:2061 [inline] __sys_connect+0x606/0x690 net/socket.c:2078 __do_sys_connect net/socket.c:2088 [inline] __se_sys_connect net/socket.c:2085 [inline] __x64_sys_connect+0x91/0xe0 net/socket.c:2085 x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core ---truncated--- | 9.1 |
Critical |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: tcp: check skb is non-NULL in tcp_rto_delta_us() We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0 Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic #193-Ubuntu Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554 Jul 26 15:05:02 rx [11061395.916786] Call Trace: Jul 26 15:05:02 rx [11061395.919488] Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9 Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380 Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50 Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0 Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20 Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450 Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140 Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90 Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0 Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40 Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220 Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240 Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0 Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240 Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130 Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280 Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10 Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30 Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_even ---truncated--- | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
[why]
Encounter NULL pointer dereference uner mst + dsc setup.
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2
Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224
RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280
RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850
R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000
R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224
FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0
Call Trace:
|
5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix off-by-one error in sd_read_block_characteristics() Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for example), sd_read_block_characteristics() may attempt an out-of-bounds memory access when accessing the zoned field at offset 8. | 7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix NULL pointer dereference in mt7996_mcu_sta_bfer_he Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he routine adding an sta interface to the mt7996 driver. Found by code review. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: f2fs: check discard support for conventional zones As the helper function f2fs_bdev_support_discard() shows, f2fs checks if the target block devices support discard by calling bdev_max_discard_sectors() and bdev_is_zoned(). This check works well for most cases, but it does not work for conventional zones on zoned block devices. F2fs assumes that zoned block devices support discard, and calls __submit_discard_cmd(). When __submit_discard_cmd() is called for sequential write required zones, it works fine since __submit_discard_cmd() issues zone reset commands instead of discard commands. However, when __submit_discard_cmd() is called for conventional zones, __blkdev_issue_discard() is called even when the devices do not support discard. The inappropriate __blkdev_issue_discard() call was not a problem before the commit 30f1e7241422 ("block: move discard checks into the ioctl handler") because __blkdev_issue_discard() checked if the target devices support discard or not. If not, it returned EOPNOTSUPP. After the commit, __blkdev_issue_discard() no longer checks it. It always returns zero and sets NULL to the given bio pointer. This NULL pointer triggers f2fs_bug_on() in __submit_discard_cmd(). The BUG is recreated with the commands below at the umount step, where /dev/nullb0 is a zoned null_blk with 5GB total size, 128MB zone size and 10 conventional zones. $ mkfs.f2fs -f -m /dev/nullb0 $ mount /dev/nullb0 /mnt $ for ((i=0;i<5;i++)); do dd if=/dev/zero of=/mnt/test bs=65536 count=1600 conv=fsync; done $ umount /mnt To fix the BUG, avoid the inappropriate __blkdev_issue_discard() call. When discard is requested for conventional zones, check if the device supports discard or not. If not, return EOPNOTSUPP. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: vfs: fix race between evice_inodes() and find_inode()&iput() Hi, all Recently I noticed a bug[1] in btrfs, after digged it into and I believe it'a race in vfs. Let's assume there's a inode (ie ino 261) with i_count 1 is called by iput(), and there's a concurrent thread calling generic_shutdown_super(). cpu0: cpu1: iput() // i_count is 1 ->spin_lock(inode) ->dec i_count to 0 ->iput_final() generic_shutdown_super() ->__inode_add_lru() ->evict_inodes() // cause some reason[2] ->if (atomic_read(inode->i_count)) continue; // return before // inode 261 passed the above check // list_lru_add_obj() // and then schedule out ->spin_unlock() // note here: the inode 261 // was still at sb list and hash list, // and I_FREEING|I_WILL_FREE was not been set btrfs_iget() // after some function calls ->find_inode() // found the above inode 261 ->spin_lock(inode) // check I_FREEING|I_WILL_FREE // and passed ->__iget() ->spin_unlock(inode) // schedule back ->spin_lock(inode) // check (I_NEW|I_FREEING|I_WILL_FREE) flags, // passed and set I_FREEING iput() ->spin_unlock(inode) ->spin_lock(inode) ->evict() // dec i_count to 0 ->iput_final() ->spin_unlock() ->evict() Now, we have two threads simultaneously evicting the same inode, which may trigger the BUG(inode->i_state & I_CLEAR) statement both within clear_inode() and iput(). To fix the bug, recheck the inode->i_count after holding i_lock. Because in the most scenarios, the first check is valid, and the overhead of spin_lock() can be reduced. If there is any misunderstanding, please let me know, thanks. [1]: https://lore.kernel.org/linux-btrfs/[email protected]/ [2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable() return false when I reproduced the bug. | 4.7 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: icmp: change the order of rate limits ICMP messages are ratelimited : After the blamed commits, the two rate limiters are applied in this order: 1) host wide ratelimit (icmp_global_allow()) 2) Per destination ratelimit (inetpeer based) In order to avoid side-channels attacks, we need to apply the per destination check first. This patch makes the following change : 1) icmp_global_allow() checks if the host wide limit is reached. But credits are not yet consumed. This is deferred to 3) 2) The per destination limit is checked/updated. This might add a new node in inetpeer tree. 3) icmp_global_consume() consumes tokens if prior operations succeeded. This means that host wide ratelimit is still effective in keeping inetpeer tree small even under DDOS. As a bonus, I removed icmp_global.lock as the fast path can use a lock-free operation. | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: exfat: resolve memory leak from exfat_create_upcase_table() If exfat_load_upcase_table reaches end and returns -EINVAL, allocated memory doesn't get freed and while exfat_load_default_upcase_table allocates more memory, leading to a memory leak. Here's link to syzkaller crash report illustrating this issue: https://syzkaller.appspot.com/text?tag=CrashReport&x=1406c201980000 | 5.5 |
Medium |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb.c: fix UAF of vma in hugetlb fault pathway Syzbot reports a UAF in hugetlb_fault(). This happens because vmf_anon_prepare() could drop the per-VMA lock and allow the current VMA to be freed before hugetlb_vma_unlock_read() is called. We can fix this by using a modified version of vmf_anon_prepare() that doesn't release the VMA lock on failure, and then release it ourselves after hugetlb_vma_unlock_read(). | 7.8 |
High |
|
11h53 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in bpf_uprobe_multi_link_attach() If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the error_free label and frees the array of bpf_uprobe's without calling bpf_uprobe_unregister(). This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer without removing it from the uprobe->consumers list. | 7.8 |
High |
|
10h48 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mm: avoid leaving partial pfn mappings around in error case As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling. | 5.5 |
Medium |
|
14h49 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: prevent kernel-usb-infoleak The syzbot reported a kernel-usb-infoleak in usbtmc_write, we need to clear the structure before filling fields. | 5.5 |
Medium |
|
15h40 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: Allocate memory for driver private data Fix driver not allocating memory for struct btintel_data which is used to store internal data. | 5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire() If the __qcuefi pointer is not set, then in the original code, we would hold onto the lock. That means that if we tried to set it later, then it would cause a deadlock. Drop the lock on the error path. That's what all the callers are expecting. | 5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: fix deadlock in show_meminfo() There is a real deadlock as well as sleeping in atomic() bug in here, if the bo put happens to be the last ref, since bo destruction wants to grab the same spinlock and sleeping locks. Fix that by dropping the ref using xe_bo_put_deferred(), and moving the final commit outside of the lock. Dropping the lock around the put is tricky since the bo can go out of scope and delete itself from the list, making it difficult to navigate to the next list entry. (cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a) | 5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: add missing bo locking in show_meminfo() bo_meminfo() wants to inspect bo state like tt and the ttm resource, however this state can change at any point leading to stuff like NPD and UAF, if the bo lock is not held. Grab the bo lock when calling bo_meminfo(), ensuring we drop any spinlocks first. In the case of object_idr we now also need to hold a ref. v2 (MattB) - Also add xe_bo_assert_held() (cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7) | 5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: fix kexec crash due to VP assist page corruption commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline") introduces a new cpuhp state for hyperv initialization. cpuhp_setup_state() returns the state number if state is CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states. For the hyperv case, since a new cpuhp state was introduced it would return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and so hv_cpu_die() won't be called on all CPUs. This means the VP assist page won't be reset. When the kexec kernel tries to setup the VP assist page again, the hypervisor corrupts the memory region of the old VP assist page causing a panic in case the kexec kernel is using that memory elsewhere. This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec panic/hang issues"). Get rid of hyperv_init_cpuhp entirely since we are no longer using a dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with cpuhp_remove_state(). | 5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required. | 5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these. | 7.8 |
High |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: Fix uaf in __timer_delete_sync There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf. | 7 |
High |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix bridge mode operations when there are no VFs
Currently, trying to set the bridge mode attribute when numvfs=0 leads to a
crash:
bridge link set dev eth2 hwmode vepa
[ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030
[...]
[ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core]
[...]
[ 168.976037] Call Trace:
[ 168.976188] |
5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices The probe() function is only used for DP83822 and DP83826 PHY, leaving the private data pointer uninitialized for the DP83825 models which causes a NULL pointer dereference in the recently introduced/changed functions dp8382x_config_init() and dp83822_set_wol(). Add the dp8382x_probe() function, so all PHY models will have a valid private data pointer to fix this issue and also prevent similar issues in the future. | 5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: fix sk refcount leaks We must put 'sk' reference before returning. | 5.5 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: net: dpaa: Pad packets to ETH_ZLEN When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination | 7.1 |
High |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: spi: nxp-fspi: fix the KASAN report out-of-bounds bug Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ============================================================== ---truncated--- | 7.8 |
High |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: dma-buf: heaps: Fix off-by-one in CMA heap fault handler Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps: Don't track CMA dma-buf pages under RssFile") it was possible to obtain a mapping larger than the buffer size via mremap and bypass the overflow check in dma_buf_mmap_internal. When using such a mapping to attempt to fault past the end of the buffer, the CMA heap fault handler also checks the fault offset against the buffer size, but gets the boundary wrong by 1. Fix the boundary check so that we don't read off the end of the pages array and insert an arbitrary page in the mapping. | 7.8 |
High |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct() dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. (cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643) | 4.7 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct() dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. (cherry picked from commit 0607a50c004798a96e62c089a4c34c220179dcb5) | 4.7 |
Medium |
|
12h42 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: axg-card: fix 'use-after-free' Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 | 7.8 |
High |
|
10h18 +00:00 |
In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_rx_work syzbot reported the following uninit-value access issue [1] nci_rx_work() parses received packet from ndev->rx_q. It should be validated header size, payload size and total packet size before processing the packet. If an invalid packet is detected, it should be silently discarded. | 7.1 |
High |
|
23h00 +00:00 |
A flaw named "EntryBleed" was found in the Linux Kernel Page Table Isolation (KPTI). This issue could allow a local attacker to leak KASLR base via prefetch side-channels based on TLB timing for Intel systems. | 5.5 |
Medium |
|
11h10 +00:00 |
There exists an arbitrary memory read within the Linux Kernel BPF - Constants provided to fill pointers in structs passed in to bpf_sys_bpf are not verified and can point anywhere, including memory not owned by BPF. An attacker with CAP_BPF can arbitrarily read memory from anywhere on the system. We recommend upgrading past commit 86f44fcec22c | 6.7 |
Medium |
|
14h39 +00:00 |
A NULL pointer dereference vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in GPU component of Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS). | 6.3 |
Medium |
|
13h25 +00:00 |
A flaw was found in the Linux kernel. Measuring usage of the shared memory does not scale with large shared memory segment counts which could lead to resource exhaustion and DoS. | 5.5 |
Medium |
|
09h59 +00:00 |
A flaw double-free memory corruption in the Linux kernel HCI device initialization subsystem was found in the way user attach malicious HCI TTY Bluetooth device. A local user could use this flaw to crash the system. This flaw affects all the Linux kernel versions starting from 3.13. | 5.5 |
Medium |
|
10h18 +00:00 |
A flaw was found in the JFS filesystem code in the Linux Kernel which allows a local attacker with the ability to set extended attributes to panic the system, causing memory corruption or escalating privileges. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. | 7.8 |
High |
|
17h38 +00:00 |
A memory leak vulnerability was found in Linux kernel in llcp_sock_connect | 7.5 |
High |
|
21h33 +00:00 |
There is a vulnerability in the linux kernel versions higher than 5.2 (if kernel compiled with config params CONFIG_BPF_SYSCALL=y , CONFIG_BPF=y , CONFIG_CGROUPS=y , CONFIG_CGROUP_BPF=y , CONFIG_HARDENED_USERCOPY not set, and BPF hook to getsockopt is registered). As result of BPF execution, the local user can trigger bug in __cgroup_bpf_run_filter_getsockopt() function that can lead to heap overflow (because of non-hardened usercopy). The impact of attack could be deny of service or possibly privileges escalation. | 7.8 |
High |
|
18h50 +00:00 |
In a Linux KVM guest that has PV TLB enabled, a process in the guest kernel may be able to read memory locations from another process in the same guest. This problem is limit to the host running linux kernel 4.10 with a guest running linux kernel 4.16 or later. The problem mainly affects AMD processors but Intel CPUs cannot be ruled out. | 6.2 |
Medium |
|
22h00 +00:00 |
A flaw was found in the way KVM hypervisor handled x2APIC Machine Specific Rregister (MSR) access with nested(=1) virtualization enabled. In that, L1 guest could access L0's APIC register values via L2 guest, when 'virtualize x2APIC mode' is enabled. A guest could use this flaw to potentially crash the host kernel resulting in DoS issue. Kernel versions from 4.16 and newer are vulnerable to this issue. | 5.6 |
Medium |
|
17h00 +00:00 |
A flaw was found in the Linux kernel in the function hid_debug_events_read() in drivers/hid/hid-debug.c file which may enter an infinite loop with certain parameters passed from a userspace. A local privileged user ("root") can cause a system lock up and a denial of service. Versions from v4.18 and newer are vulnerable. | 4.4 |
Medium |
|
00h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to obtain root access by exploiting a symbolic link attack to read/write/corrupt a file that they originally did not have permission to access. IBM X-Force ID: 148804. | 8.4 |
High |
|
00h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local unprivileged user to overwrite files on the system which could cause damage to the database. IBM X-Force ID: 149429. | 6.2 |
Medium |
|
00h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 binaries load shared libraries from an untrusted path potentially giving low privilege user full access to the DB2 instance account by loading a malicious shared library. IBM X-Force ID: 149640. | 8.4 |
High |
|
16h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10,1, 10.5 and 11.1 could allow a local user to execute arbitrary code and conduct DLL hijacking attacks. IBM X-Force ID: 140209. | 7.8 |
High |
|
16h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5 and 11.1 binaries load shared libraries from an untrusted path potentially giving low privilege users full access to the DB2 instance account by loading a malicious shared library. IBM X-Force ID: 140972. | 8.4 |
High |
|
16h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to execute arbitrary code due to a format string error. IBM X-Force ID: 143023. | 8.4 |
High |
|
19h00 +00:00 |
The "pingsender" executable used by the Firefox Health Report dynamically loads a system copy of libcurl, which an attacker could replace. This allows for privilege escalation as the replaced libcurl code will run with Firefox's privileges. Note: This attack requires an attacker have local system access and only affects OS X and Linux. Windows systems are not affected. This vulnerability affects Firefox < 57. | 7.8 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability that could allow a local user to overwrite arbitrary files owned by the DB2 instance owner. IBM X-Force ID: 140044. | 5.5 |
Medium |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability that could allow a local user to overwrite arbitrary files owned by the DB2 instance owner. IBM X-Force ID: 140045. | 5.5 |
Medium |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability that could allow a local user to overwrite arbitrary files owned by the DB2 instance owner. IBM X-Force ID: 140046. | 5.5 |
Medium |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 contains a vulnerability that could allow a local user to overwrite arbitrary files owned by the DB2 instance owner. IBM X-Force ID: 140047. | 5.5 |
Medium |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to stack based buffer overflow, caused by improper bounds checking which could lead an attacker to execute arbitrary code. IBM X-Force ID: 140210. | 7.8 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 10.5 and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-Force ID: 140973. | 8.4 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 10.5 and 11.1, under specific or unusual conditions, could allow a local user to overflow a buffer which may result in a privilege escalation to the DB2 instance owner. IBM X-Force ID: 141624. | 7.4 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to overflow a buffer which may result in a privilege escalation to the DB2 instance owner. IBM X-Force ID: 142648. | 8.4 |
High |
|
14h00 +00:00 |
IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 could allow a local user to overflow a buffer which may result in a privilege escalation to the DB2 instance owner. IBM X-Force ID: 143022. | 8.4 |
High |
|
12h00 +00:00 |
IBM GSKit (IBM DB2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, and 11.1) duplicates the PRNG state across fork() system calls when multiple ICC instances are loaded which could result in duplicate Session IDs and a risk of duplicate key material. IBM X-Force ID: 139071. | 9.1 |
Critical |
|
12h00 +00:00 |
IBM GSKit (IBM DB2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, and 11.1) contains several environment variables that a local attacker could overflow and cause a denial of service. IBM X-Force ID: 139072. | 6.2 |
Medium |
|
21h00 +00:00 |
VMware Tools prior to 10.0.9 contains multiple file system races in libDeployPkg, related to the use of hard-coded paths under /tmp. Successful exploitation of this issue may result in a local privilege escalation. CVSS:3.0/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H | 6.7 |
Medium |
|
14h00 +00:00 |
A potential Buffer Overflow Vulnerability (from a BB Code handling issue) has been identified in TeamSpeak Server version 3.0.13.6 (08/11/2016 09:48:33), it enables the users to Crash any WINDOWS Client that clicked into a Vulnerable Channel of a TeamSpeak Server. | 7.5 |
High |
|
22h00 +00:00 |
The OS Installation Management component in CA Client Automation r12.9, r14.0, and r14.0 SP1 places an encrypted password into a readable local file during operating system installation, which allows local users to obtain sensitive information by reading this file after operating system installation. | 5.5 |
Medium |
|
21h00 +00:00 |
IBM Tivoli Storage Manager discloses unencrypted login credentials to Vmware vCenter that could be obtained by a local user. | 6.5 |
Medium |
|
21h00 +00:00 |
IBM BigFix Inventory v9 stores potentially sensitive information in log files that could be read by a local user. | 5.5 |
Medium |
|
21h00 +00:00 |
IBM BigFix Inventory v9 could disclose sensitive information to an unauthorized user using HTTP GET requests. This information could be used to mount further attacks against the system. | 5.3 |
Medium |
|
20h00 +00:00 |
IBM BigFix Inventory v9 9.2 stores user credentials in plain in clear text which can be read by a local user. | 5.5 |
Medium |
|
19h00 +00:00 |
IBM BigFix Inventory v9 could allow a remote attacker to conduct phishing attacks, using an open redirect attack. By persuading a victim to visit a specially-crafted Web site, a remote attacker could exploit this vulnerability to spoof the URL displayed to redirect a user to a malicious Web site that would appear to be trusted. This could allow the attacker to obtain highly sensitive information or conduct further attacks against the victim. | 6.1 |
Medium |
|
19h00 +00:00 |
IBM BigFix Inventory v9 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. | 5.9 |
Medium |
|
19h00 +00:00 |
IBM BigFix Inventory v9 is vulnerable to a denial of service, caused by an XML External Entity Injection (XXE) error when processing XML data. A remote attacker could exploit this vulnerability to expose highly sensitive information or consume all available memory resources. | 8.1 |
High |
|
19h00 +00:00 |
IBM BigFix Inventory v9 allows web pages to be stored locally which can be read by another user on the system. | 5.5 |
Medium |
|
21h01 +00:00 |
The casrvc program in CA Common Services, as used in CA Client Automation 12.8, 12.9, and 14.0; CA SystemEDGE 5.8.2 and 5.9; CA Systems Performance for Infrastructure Managers 12.8 and 12.9; CA Universal Job Management Agent 11.2; CA Virtual Assurance for Infrastructure Managers 12.8 and 12.9; CA Workload Automation AE 11, 11.3, 11.3.5, and 11.3.6 on AIX, HP-UX, Linux, and Solaris allows local users to modify arbitrary files and consequently gain root privileges via vectors related to insufficient validation. | 7.8 |
High |
|
21h00 +00:00 |
RESTful web services in CA Service Desk Manager 12.9 and CA Service Desk Management 14.1 might allow remote authenticated users to read or modify task information by leveraging incorrect permissions applied to a RESTful request. | 8.1 |
High |
|
19h37 +00:00 |
For the NVIDIA Quadro, NVS, GeForce, and Tesla products, NVIDIA GPU Display Driver on Linux R304 before 304.132, R340 before 340.98, R367 before 367.55, R361_93 before 361.93.03, and R370 before 370.28 contains a vulnerability in the kernel mode layer (nvidia.ko) handler for mmap() where improper input validation may allow users to gain access to arbitrary physical memory, leading to an escalation of privileges. | 7.8 |
High |
|
23h00 +00:00 |
Untrusted search path vulnerability in IBM DB2 9.7 through FP11, 10.1 through FP5, 10.5 before FP8, and 11.1 GA on Linux, AIX, and HP-UX allows local users to gain privileges via a Trojan horse library that is accessed by a setuid or setgid program. | 7.3 |
High |
|
23h00 +00:00 |
Mozilla Firefox before 48.0 and Firefox ESR 45.x before 45.3 on Linux make cairo _cairo_surface_get_extents calls that do not properly interact with libav header allocation in FFmpeg 0.10, which allows remote attackers to cause a denial of service (application crash) via a crafted video. | 6.5 |
Medium |
|
14h00 +00:00 |
Unspecified vulnerability in Adobe Flash Player 21.0.0.242 and earlier allows remote attackers to execute arbitrary code via unknown vectors, as exploited in the wild in June 2016. | 9.8 |
Critical |
|
09h00 +00:00 |
Cross-site scripting (XSS) vulnerability in VMware vRealize Automation 6.x before 6.2.4 on Linux allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. | 5.4 |
Medium |
|
09h00 +00:00 |
Cross-site scripting (XSS) vulnerability in VMware vRealize Business Advanced and Enterprise 8.x before 8.2.5 on Linux allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. | 5.4 |
Medium |
|
17h00 +00:00 |
Mozilla Firefox before 45.0 on Linux, when an Intel video driver is used, allows remote attackers to cause a denial of service (memory consumption or stack memory corruption) by triggering use of a WebGL shader. | 6.5 |
Medium |
|
19h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Experience Manager (AEM) 6.1.0 allows remote authenticated users to inject arbitrary web script or HTML via a folder title field that is mishandled in the Deletion popup dialog. | 6.1 |
Medium |
|
19h00 +00:00 |
The Servlets Post component 2.3.6 in Apache Sling, as used in Adobe Experience Manager 5.6.1, 6.0.0, and 6.1.0, allows remote attackers to obtain sensitive information via unspecified vectors. | 7.5 |
High |
|
19h00 +00:00 |
Adobe Experience Manager 5.6.1, 6.0.0, and 6.1.0 might allow remote attackers to have an unspecified impact via a crafted serialized Java object. | 7.5 |
High |
|
23h00 +00:00 |
Integer overflow in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors. | 8.8 |
High |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8460, CVE-2015-8636, and CVE-2015-8645. | 10 |
Critical |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8459, CVE-2015-8636, and CVE-2015-8645. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8459, CVE-2015-8460, and CVE-2015-8645. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion." | 8.8 |
High |
|
22h00 +00:00 |
Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8459, CVE-2015-8460, and CVE-2015-8636. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8647, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8648, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8649, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, and CVE-2015-8650. | 8.8 |
High |
|
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.324 and 19.x and 20.x before 20.0.0.267 on Windows and OS X and before 11.2.202.559 on Linux, Adobe AIR before 20.0.0.233, Adobe AIR SDK before 20.0.0.233, and Adobe AIR SDK & Compiler before 20.0.0.233 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8634, CVE-2015-8635, CVE-2015-8638, CVE-2015-8639, CVE-2015-8640, CVE-2015-8641, CVE-2015-8642, CVE-2015-8643, CVE-2015-8646, CVE-2015-8647, CVE-2015-8648, and CVE-2015-8649. | 8.8 |
High |
|
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in the TextField object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted autoSize property value, a different vulnerability than CVE-2015-8048, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the MovieClip object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted beginGradientFill call, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8457. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2015-8440 and CVE-2015-8453. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8443, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in the PrintJob object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via crafted addPage arguments, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the Selection object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted setFocus call, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted XML object that is mishandled during a toString call, a different vulnerability than CVE-2015-8446. | 9.3 |
||
01h00 +00:00 |
The SharedObject object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code by leveraging an unspecified "type confusion" during a getRemote call, a different vulnerability than CVE-2015-8456. | 9.3 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2015-8409 and CVE-2015-8453. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in the MovieClip object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted filters property value, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8444, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8451, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Integer overflow in the Shader filter implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a large BitmapData source object. | 9.3 |
||
01h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via an MP3 file with COMM tags that are mishandled during memory allocation, a different vulnerability than CVE-2015-8438. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the Color object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via crafted setTransform arguments, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the DisplacementMapFilter object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted mapBitmap property value, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8449, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in the MovieClip object implementation in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted lineTo method call, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8450, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via a crafted filters property value in a TextField object, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8452, and CVE-2015-8454. | 9.3 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, and CVE-2015-8455. | 10 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, and CVE-2015-8454. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to bypass the ASLR protection mechanism via JIT data, a different vulnerability than CVE-2015-8409 and CVE-2015-8440. | 4.3 |
||
01h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8048, CVE-2015-8049, CVE-2015-8050, CVE-2015-8055, CVE-2015-8056, CVE-2015-8057, CVE-2015-8058, CVE-2015-8059, CVE-2015-8061, CVE-2015-8062, CVE-2015-8063, CVE-2015-8064, CVE-2015-8065, CVE-2015-8066, CVE-2015-8067, CVE-2015-8068, CVE-2015-8069, CVE-2015-8070, CVE-2015-8071, CVE-2015-8401, CVE-2015-8402, CVE-2015-8403, CVE-2015-8404, CVE-2015-8405, CVE-2015-8406, CVE-2015-8410, CVE-2015-8411, CVE-2015-8412, CVE-2015-8413, CVE-2015-8414, CVE-2015-8420, CVE-2015-8421, CVE-2015-8422, CVE-2015-8423, CVE-2015-8424, CVE-2015-8425, CVE-2015-8426, CVE-2015-8427, CVE-2015-8428, CVE-2015-8429, CVE-2015-8430, CVE-2015-8431, CVE-2015-8432, CVE-2015-8433, CVE-2015-8434, CVE-2015-8435, CVE-2015-8436, CVE-2015-8437, CVE-2015-8441, CVE-2015-8442, CVE-2015-8447, CVE-2015-8448, CVE-2015-8449, CVE-2015-8450, and CVE-2015-8452. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-8045, CVE-2015-8047, CVE-2015-8060, CVE-2015-8408, CVE-2015-8416, CVE-2015-8417, CVE-2015-8418, CVE-2015-8419, CVE-2015-8443, CVE-2015-8444, and CVE-2015-8451. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2015-8439. | 9.3 |
||
01h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 18.0.0.268 and 19.x and 20.x before 20.0.0.228 on Windows and OS X and before 11.2.202.554 on Linux, Adobe AIR before 20.0.0.204, Adobe AIR SDK before 20.0.0.204, and Adobe AIR SDK & Compiler before 20.0.0.204 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-8407. | 10 |
||
19h00 +00:00 |
Multiple integer overflows in the kernel mode driver for the NVIDIA GPU graphics driver R340 before 341.92, R352 before 354.35, and R358 before 358.87 on Windows and R304 before 304.131, R340 before 340.96, R352 before 352.63, and R358 before 358.16 on Linux allow local users to obtain sensitive information, cause a denial of service (crash), or possibly gain privileges via unknown vectors, which trigger uninitialized or out of bounds memory access. NOTE: this identifier has been SPLIT per ADT2 and ADT3 due to different vulnerability type and affected versions. See CVE-2015-8328 for the vulnerability in the NVAPI support layer in NVIDIA drivers for Windows. | 6.6 |
||
23h00 +00:00 |
Cisco AnyConnect Secure Mobility Client 4.1(8) on OS X and Linux does not verify pathnames before installation actions, which allows local users to obtain root privileges via a crafted installation file, aka Bug ID CSCuv11947. | 7.2 |
||
23h00 +00:00 |
gfx/2d/DataSurfaceHelpers.cpp in Mozilla Firefox before 41.0 on Linux improperly attempts to use the Cairo library with 32-bit color-depth surface creation followed by 16-bit color-depth surface display, which allows remote attackers to obtain sensitive information from process memory or cause a denial of service (out-of-bounds read) by using a CANVAS element to trigger 2D rendering. | 6.4 |
||
08h00 +00:00 |
Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 do not properly restrict the SWF file format, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks against JSONP endpoints, and obtain sensitive information, via a crafted OBJECT element with SWF content satisfying the character-set requirements of a callback API. NOTE: this issue exists because of an incomplete fix for CVE-2014-4671 and CVE-2014-5333. | 4.3 |
||
08h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-5570, CVE-2015-5581, CVE-2015-5584, and CVE-2015-6682. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors. | 5 |
||
08h00 +00:00 |
Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 allow attackers to execute arbitrary code or cause a denial of service (stack memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-5567. | 10 |
||
08h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 18.0.0.241 and 19.x before 19.0.0.185 on Windows and OS X and before 11.2.202.521 on Linux, Adobe AIR before 19.0.0.190, Adobe AIR SDK before 19.0.0.190, and Adobe AIR SDK & Compiler before 19.0.0.190 allow attackers to bypass the Same Origin Policy and obtain sensitive information via unspecified vectors. | 5 |
||
23h00 +00:00 |
Integer overflow in the make_filter_table function in pixops/pixops.c in gdk-pixbuf before 2.31.5, as used in Mozilla Firefox before 40.0 and Firefox ESR 38.x before 38.2 on Linux, Google Chrome on Linux, and other products, allows remote attackers to execute arbitrary code or cause a denial of service (heap-based buffer overflow and application crash) via crafted bitmap dimensions that are mishandled during scaling. | 6.8 |
||
08h00 +00:00 |
IBM InfoSphere DataStage 8.1, 8.5, 8.7, 9.1, and 11.3 through 11.3.1.2 on UNIX allows local users to write to executable files, and consequently obtain root privileges, via unspecified vectors. | 7.2 |
||
08h00 +00:00 |
CA Common Services, as used in CA Client Automation r12.5 SP01, r12.8, and r12.9; CA Network and Systems Management r11.0, r11.1, and r11.2; CA NSM Job Management Option r11.0, r11.1, and r11.2; CA Universal Job Management Agent; CA Virtual Assurance for Infrastructure Managers (aka SystemEDGE) 12.6, 12.7, 12.8, and 12.9; and CA Workload Automation AE r11, r11.3, r11.3.5, and r11.3.6 on UNIX, allows local users to gain privileges via an unspecified environment variable. | 4.6 |
||
08h00 +00:00 |
CA Common Services, as used in CA Client Automation r12.5 SP01, r12.8, and r12.9; CA Network and Systems Management r11.0, r11.1, and r11.2; CA NSM Job Management Option r11.0, r11.1, and r11.2; CA Universal Job Management Agent; CA Virtual Assurance for Infrastructure Managers (aka SystemEDGE) 12.6, 12.7, 12.8, and 12.9; and CA Workload Automation AE r11, r11.3, r11.3.5, and r11.3.6 on UNIX, does not properly perform bounds checking, which allows local users to gain privileges via unspecified vectors. | 4.6 |
||
08h00 +00:00 |
CA Common Services, as used in CA Client Automation r12.5 SP01, r12.8, and r12.9; CA Network and Systems Management r11.0, r11.1, and r11.2; CA NSM Job Management Option r11.0, r11.1, and r11.2; CA Universal Job Management Agent; CA Virtual Assurance for Infrastructure Managers (aka SystemEDGE) 12.6, 12.7, 12.8, and 12.9; and CA Workload Automation AE r11, r11.3, r11.3.5, and r11.3.6 on UNIX, does not properly validate an unspecified variable, which allows local users to gain privileges via unknown vectors. | 4.6 |
||
19h00 +00:00 |
Google Chrome before 41.0.2272.118 does not properly handle the interaction of IPC, the Gamepad API, and Google V8, which allows remote attackers to execute arbitrary code via unspecified vectors. | 7.5 |
||
19h00 +00:00 |
Race condition in gpu/command_buffer/service/gles2_cmd_decoder.cc in Google Chrome before 41.0.2272.118 allows remote attackers to cause a denial of service (buffer overflow) or possibly have unspecified other impact by manipulating OpenGL ES commands. | 6.8 |
||
08h00 +00:00 |
Use-after-free vulnerability in the AppendElements function in Mozilla Firefox before 37.0, Firefox ESR 31.x before 31.6, and Thunderbird before 31.6 on Linux, when the Fluendo MP3 plugin for GStreamer is used, allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted MP3 file. | 5.1 |
||
01h00 +00:00 |
Symantec NetBackup OpsCenter 7.6.0.2 through 7.6.1 on Linux and UNIX allows remote attackers to execute arbitrary JavaScript code via unspecified vectors. | 7.5 |
||
01h00 +00:00 |
Race condition in the client in IBM Tivoli Storage Manager (TSM) 5.4.0.0 through 5.4.3.6, 5.5.0.0 through 5.5.4.3, 6.1.0.0 through 6.1.5.6, 6.2 before 6.2.5.4, 6.3 before 6.3.2.3, 6.4 before 6.4.2.1, and 7.1 before 7.1.1 on UNIX and Linux allows local users to obtain root privileges via unspecified vectors. | 6.9 |
||
01h00 +00:00 |
Directory traversal vulnerability in IBM Optim Performance Manager for DB2 4.1.0.1 through 4.1.1 on Linux, UNIX, and Windows and IBM InfoSphere Optim Performance Manager for DB2 5.1 through 5.3.1 on Linux, UNIX, and Windows allows remote attackers to access arbitrary files via a .. (dot dot) in a URL. | 7.8 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 do not properly validate files, which has unspecified impact and attack vectors. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow attackers to obtain sensitive keystroke information via unspecified vectors. | 5 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-0306. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-0309. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion." | 9.3 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2015-0303. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allow remote attackers to obtain sensitive information from process memory or cause a denial of service (out-of-bounds read) via unspecified vectors. | 8.5 |
||
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.260 and 14.x through 16.x before 16.0.0.257 on Windows and OS X and before 11.2.202.429 on Linux, Adobe AIR before 16.0.0.245 on Windows and OS X and before 16.0.0.272 on Android, Adobe AIR SDK before 16.0.0.272, and Adobe AIR SDK & Compiler before 16.0.0.272 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2015-0304. | 10 |
||
21h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 13.0.0.259 and 14.x and 15.x before 15.0.0.246 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in December 2014. | 9.8 |
Critical |
|
20h00 +00:00 |
Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows remote attackers to bypass the Same Origin Policy via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-9164. | 10 |
||
20h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to obtain sensitive information via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.259 and 14.x through 16.x before 16.0.0.235 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0587. | 10 |
||
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0588 and CVE-2014-8438. | 10 |
||
22h00 +00:00 |
Double free vulnerability in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0581, CVE-2014-8440, and CVE-2014-8441. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0584, CVE-2014-0585, CVE-2014-0586, and CVE-2014-0590. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0576, CVE-2014-8440, and CVE-2014-8441. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0589. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to complete a transition from Low Integrity to Medium Integrity via unspecified vectors. | 7.5 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0577, CVE-2014-0585, CVE-2014-0586, and CVE-2014-0590. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0577, CVE-2014-0584, CVE-2014-0586, and CVE-2014-0590. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0577, CVE-2014-0584, CVE-2014-0585, and CVE-2014-0590. | 10 |
||
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0573 and CVE-2014-8438. | 10 |
||
22h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0582. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code by leveraging an unspecified "type confusion," a different vulnerability than CVE-2014-0577, CVE-2014-0584, CVE-2014-0585, and CVE-2014-0586. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow remote attackers to discover session tokens via unspecified vectors. | 5 |
||
22h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0573 and CVE-2014-0588. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0576, CVE-2014-0581, and CVE-2014-8441. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0576, CVE-2014-0581, and CVE-2014-8440. | 10 |
||
22h00 +00:00 |
Adobe Flash Player before 13.0.0.252 and 14.x and 15.x before 15.0.0.223 on Windows and OS X and before 11.2.202.418 on Linux, Adobe AIR before 15.0.0.356, Adobe AIR SDK before 15.0.0.356, and Adobe AIR SDK & Compiler before 15.0.0.356 allow attackers to complete a transition from Low Integrity to Medium Integrity by leveraging incorrect permissions. | 7.5 |
||
21h00 +00:00 |
The apt-get download command in APT before 1.0.9 does not properly validate signatures for packages, which allows remote attackers to execute arbitrary code via a crafted package. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.250 and 14.x and 15.x before 15.0.0.189 on Windows and OS X and before 11.2.202.411 on Linux, Adobe AIR before 15.0.0.293, Adobe AIR SDK before 15.0.0.302, and Adobe AIR SDK & Compiler before 15.0.0.302 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0564. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to bypass intended access restrictions via unspecified vectors. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0549, CVE-2014-0550, CVE-2014-0551, CVE-2014-0552, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow remote attackers to bypass the Same Origin Policy via unspecified vectors. | 7.5 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0550, CVE-2014-0551, CVE-2014-0552, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0549, CVE-2014-0551, CVE-2014-0552, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0549, CVE-2014-0550, CVE-2014-0552, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0549, CVE-2014-0550, CVE-2014-0551, and CVE-2014-0555. | 10 |
||
23h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0549, CVE-2014-0550, CVE-2014-0551, and CVE-2014-0552. | 10 |
||
23h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0559. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors. | 10 |
||
23h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2014-0556. | 10 |
||
08h00 +00:00 |
Stack-based buffer overflow in IBM DB2 9.7 through FP9a, 9.8 through FP5, 10.1 through FP4, and 10.5 before FP4 on Linux, UNIX, and Windows allows remote authenticated users to execute arbitrary code via a crafted ALTER MODULE statement. | 8.5 |
||
08h00 +00:00 |
The SQL engine in IBM DB2 9.5 through FP10, 9.7 through FP9a, 9.8 through FP5, 10.1 through FP4, and 10.5 before FP4 on Linux, UNIX, and Windows allows remote authenticated users to cause a denial of service (daemon crash) via a crafted UNION clause in a subquery of a SELECT statement. | 3.5 |
||
08h00 +00:00 |
IBM DB2 10.5 before FP4 on Linux and AIX creates temporary files during CDE table LOAD operations, which allows local users to obtain sensitive information by reading a file while a LOAD is occurring. | 2.1 |
||
08h00 +00:00 |
Monitoring Agent for UNIX Logs 6.2.0 through FP03, 6.2.1 through FP04, 6.2.2 through FP09, and 6.2.3 through FP04 and Monitoring Server (ms) and Shared Libraries (ax) 6.2.0 through FP03, 6.2.1 through FP04, 6.2.2 through FP08, 6.2.3 through FP01, and 6.3.0 through FP01 in IBM Tivoli Monitoring (ITM) on UNIX allow local users to gain privileges via unspecified vectors. | 7.2 |
||
08h00 +00:00 |
The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file. | 5.5 |
Medium |
|
08h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict the SWF file format, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks against JSONP endpoints, and obtain sensitive information, via a crafted OBJECT element with SWF content satisfying the character-set requirements of a callback API, in conjunction with a manipulation involving a '$' (dollar sign) or '(' (open parenthesis) character. NOTE: this issue exists because of an incomplete fix for CVE-2014-4671. | 4.3 |
||
20h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0542, CVE-2014-0543, CVE-2014-0544, and CVE-2014-0545. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 allow attackers to bypass intended access restrictions via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0540, CVE-2014-0543, CVE-2014-0544, and CVE-2014-0545. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0540, CVE-2014-0542, CVE-2014-0544, and CVE-2014-0545. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0540, CVE-2014-0542, CVE-2014-0543, and CVE-2014-0545. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 13.0.0.241 and 14.x before 14.0.0.176 on Windows and OS X and before 11.2.202.400 on Linux, Adobe AIR before 14.0.0.178 on Windows and OS X and before 14.0.0.179 on Android, Adobe AIR SDK before 14.0.0.178, and Adobe AIR SDK & Compiler before 14.0.0.178 do not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism via unspecified vectors, a different vulnerability than CVE-2014-0540, CVE-2014-0542, CVE-2014-0543, and CVE-2014-0544. | 10 |
||
17h00 +00:00 |
dbus 1.3.0 before 1.6.22 and 1.8.x before 1.8.6, when running on Linux 2.6.37-rc4 or later, allows local users to cause a denial of service (system-bus disconnect of other services or applications) by sending a message containing a file descriptor, then exceeding the maximum recursion depth before the initial message is forwarded. | 2.1 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.231 and 14.x before 14.0.0.145 on Windows and OS X and before 11.2.202.394 on Linux, Adobe AIR before 14.0.0.137 on Android, Adobe AIR SDK before 14.0.0.137, and Adobe AIR SDK & Compiler before 14.0.0.137 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0539. | 7.5 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.231 and 14.x before 14.0.0.145 on Windows and OS X and before 11.2.202.394 on Linux, Adobe AIR before 14.0.0.137 on Android, Adobe AIR SDK before 14.0.0.137, and Adobe AIR SDK & Compiler before 14.0.0.137 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0537. | 7.5 |
||
23h00 +00:00 |
Adobe Flash Player before 13.0.0.231 and 14.x before 14.0.0.145 on Windows and OS X and before 11.2.202.394 on Linux, Adobe AIR before 14.0.0.137 on Android, Adobe AIR SDK before 14.0.0.137, and Adobe AIR SDK & Compiler before 14.0.0.137 do not properly restrict the SWF file format, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks against JSONP endpoints, and obtain sensitive information, via a crafted OBJECT element with SWF content satisfying the character-set requirements of a callback API. | 4.3 |
||
13h00 +00:00 |
Unspecified vulnerability in HP Release Control 9.x before 9.13 p3 and 9.2x before RC 9.21.0003 p1 on Windows and 9.2x before RC 9.21.0002 p1 on Linux allows remote authenticated users to obtain sensitive information via unknown vectors. | 4 |
||
13h00 +00:00 |
Unspecified vulnerability in HP Release Control 9.x before 9.13 p3 and 9.2x before RC 9.21.0003 p1 on Windows and 9.2x before RC 9.21.0002 p1 on Linux allows remote authenticated users to gain privileges via unknown vectors. | 9 |
||
08h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2014-0532 and CVE-2014-0533. | 4.3 |
||
08h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2014-0531 and CVE-2014-0533. | 4.3 |
||
08h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2014-0531 and CVE-2014-0532. | 4.3 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0535. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0534. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.223 and 14.x before 14.0.0.125 on Windows and OS X and before 11.2.202.378 on Linux, Adobe AIR before 14.0.0.110, Adobe AIR SDK before 14.0.0.110, and Adobe AIR SDK & Compiler before 14.0.0.110 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow remote attackers to bypass the Same Origin Policy via unspecified vectors. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0518, CVE-2014-0519, and CVE-2014-0520. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0517, CVE-2014-0519, and CVE-2014-0520. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0517, CVE-2014-0518, and CVE-2014-0520. | 7.5 |
||
08h00 +00:00 |
Adobe Flash Player before 13.0.0.214 on Windows and OS X and before 11.2.202.359 on Linux, Adobe AIR SDK before 13.0.0.111, and Adobe AIR SDK & Compiler before 13.0.0.111 allow attackers to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2014-0517, CVE-2014-0518, and CVE-2014-0519. | 7.5 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 11.7.700.279 and 11.8.x through 13.0.x before 13.0.0.206 on Windows and OS X, and before 11.2.202.356 on Linux, allows remote attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in April 2014. | 10 |
||
17h00 +00:00 |
IBM Notes and Domino 8.5.x before 8.5.3 FP6 IF3 and 9.x before 9.0.1 FP1 on 32-bit Linux platforms use incorrect gcc options, which makes it easier for remote attackers to execute arbitrary code by leveraging the absence of the NX protection mechanism and placing crafted x86 code on the stack, aka SPR KLYH9GGS9W. | 5 |
||
19h00 +00:00 |
Buffer overflow in Adobe Flash Player before 11.7.700.275 and 11.8.x through 13.0.x before 13.0.0.182 on Windows and OS X and before 11.2.202.350 on Linux, Adobe AIR before 13.0.0.83 on Android, Adobe AIR SDK before 13.0.0.83, and Adobe AIR SDK & Compiler before 13.0.0.83 allows attackers to execute arbitrary code via unspecified vectors. | 9.3 |
||
19h00 +00:00 |
Adobe Flash Player before 11.7.700.275 and 11.8.x through 13.0.x before 13.0.0.182 on Windows and OS X and before 11.2.202.350 on Linux, Adobe AIR before 13.0.0.83 on Android, Adobe AIR SDK before 13.0.0.83, and Adobe AIR SDK & Compiler before 13.0.0.83 allow attackers to bypass intended access restrictions and obtain sensitive information via unspecified vectors. | 5 |
||
19h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 11.7.700.275 and 11.8.x through 13.0.x before 13.0.0.182 on Windows and OS X and before 11.2.202.350 on Linux, Adobe AIR before 13.0.0.83 on Android, Adobe AIR SDK before 13.0.0.83, and Adobe AIR SDK & Compiler before 13.0.0.83 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. | 4.3 |
||
09h00 +00:00 |
Unspecified vulnerability in HP Smart Update Manager 5.3.5 before build 70 on Linux allows local users to gain privileges via unknown vectors. | 7.2 |
||
00h00 +00:00 |
Adobe Flash Player before 11.7.700.272 and 11.8.x through 12.0.x before 12.0.0.77 on Windows and OS X, and before 11.2.202.346 on Linux, allows remote attackers to bypass the Same Origin Policy via unspecified vectors. | 6.4 |
||
00h00 +00:00 |
Adobe Flash Player before 11.7.700.272 and 11.8.x through 12.0.x before 12.0.0.77 on Windows and OS X, and before 11.2.202.346 on Linux, allows attackers to read the clipboard via unspecified vectors. | 5 |
||
01h00 +00:00 |
Stack-based buffer overflow in Adobe Flash Player before 11.7.700.269 and 11.8.x through 12.0.x before 12.0.0.70 on Windows and Mac OS X and before 11.2.202.341 on Linux, Adobe AIR before 4.0.0.1628 on Android, Adobe AIR SDK before 4.0.0.1628, and Adobe AIR SDK & Compiler before 4.0.0.1628 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 11.7.700.269 and 11.8.x through 12.0.x before 12.0.0.70 on Windows and Mac OS X and before 11.2.202.341 on Linux, Adobe AIR before 4.0.0.1628 on Android, Adobe AIR SDK before 4.0.0.1628, and Adobe AIR SDK & Compiler before 4.0.0.1628 do not prevent access to address information, which makes it easier for attackers to bypass the ASLR protection mechanism via unspecified vectors. | 7.8 |
||
01h00 +00:00 |
Integer underflow in Adobe Flash Player before 11.7.700.261 and 11.8.x through 12.0.x before 12.0.0.44 on Windows and Mac OS X, and before 11.2.202.336 on Linux, allows remote attackers to execute arbitrary code via unspecified vectors. | 9.8 |
Critical |
|
01h00 +00:00 |
Adobe Flash Player before 11.7.700.260 and 11.8.x and 11.9.x before 12.0.0.38 on Windows and Mac OS X and before 11.2.202.335 on Linux, Adobe AIR before 4.0.0.1390, Adobe AIR SDK before 4.0.0.1390, and Adobe AIR SDK & Compiler before 4.0.0.1390 allow attackers to bypass unspecified protection mechanisms via unknown vectors. | 10 |
||
01h00 +00:00 |
Adobe Flash Player before 11.7.700.260 and 11.8.x and 11.9.x before 12.0.0.38 on Windows and Mac OS X and before 11.2.202.335 on Linux, Adobe AIR before 4.0.0.1390, Adobe AIR SDK before 4.0.0.1390, and Adobe AIR SDK & Compiler before 4.0.0.1390 allow attackers to defeat the ASLR protection mechanism by leveraging an "address leak." | 10 |
||
01h00 +00:00 |
RealVNC VNC 5.0.6 on Mac OS X, Linux, and UNIX allows local users to gain privileges via a crafted argument to the (1) vncserver, (2) vncserver-x11, or (3) Xvnc helper. | 7.2 |
||
14h00 +00:00 |
Mozilla Firefox before 26.0 and SeaMonkey before 2.23 on Linux allow user-assisted remote attackers to read clipboard data by leveraging certain middle-click paste operations. | 4.3 |
||
16h00 +00:00 |
The default configuration of Parallels Plesk Panel 9.0.x and 9.2.x on UNIX, and Small Business Panel 10.x on UNIX, has an improper ScriptAlias directive for phppath, which makes it easier for remote attackers to execute arbitrary code via a crafted request, a different vulnerability than CVE-2012-1823. | 7.5 |
||
08h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 11.7.700.232 and 11.8.x before 11.8.800.94 on Windows and Mac OS X, before 11.2.202.297 on Linux, before 11.1.111.64 on Android 2.x and 3.x, and before 11.1.115.69 on Android 4.x allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 11.7.700.232 and 11.8.x before 11.8.800.94 on Windows and Mac OS X, before 11.2.202.297 on Linux, before 11.1.111.64 on Android 2.x and 3.x, and before 11.1.115.69 on Android 4.x allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
08h00 +00:00 |
Integer overflow in Adobe Flash Player before 11.7.700.232 and 11.8.x before 11.8.800.94 on Windows and Mac OS X, before 11.2.202.297 on Linux, before 11.1.111.64 on Android 2.x and 3.x, and before 11.1.115.69 on Android 4.x allows attackers to execute arbitrary code via PCM data that is not properly handled during resampling. | 10 |
||
14h00 +00:00 |
FortiClient before 4.3.5.472 on Windows, before 4.0.3.134 on Mac OS X, and before 4.0 on Android; FortiClient Lite before 4.3.4.461 on Windows; FortiClient Lite 2.0 through 2.0.0223 on Android; and FortiClient SSL VPN before 4.0.2258 on Linux proceed with an SSL session after determining that the server's X.509 certificate is invalid, which allows man-in-the-middle attackers to obtain sensitive information by leveraging a password transmission that occurs before the user warning about the certificate problem. | 5.4 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3332, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3333, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3334, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, and CVE-2013-3335. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.86 and 11.x before 11.7.700.202 on Windows and Mac OS X, before 10.3.183.86 and 11.x before 11.2.202.285 on Linux, before 11.1.111.54 on Android 2.x and 3.x, and before 11.1.115.58 on Android 4.x; Adobe AIR before 3.7.0.1860; and Adobe AIR SDK & Compiler before 3.7.0.1860 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2728, CVE-2013-3324, CVE-2013-3325, CVE-2013-3326, CVE-2013-3327, CVE-2013-3328, CVE-2013-3329, CVE-2013-3330, CVE-2013-3331, CVE-2013-3332, CVE-2013-3333, and CVE-2013-3334. | 10 |
||
08h00 +00:00 |
Integer overflow in IBM Notes 8.5.x before 8.5.3 FP4 Interim Fix 1 and 9.x before 9.0 Interim Fix 1 on Windows, and 8.5.x before 8.5.3 FP5 and 9.x before 9.0.1 on Linux, allows remote attackers to execute arbitrary code via a malformed PNG image in a previewed e-mail message, aka SPR NPEI96K82Q. | 6.8 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.75 and 11.x before 11.7.700.169 on Windows and Mac OS X, before 10.3.183.75 and 11.x before 11.2.202.280 on Linux, before 11.1.111.50 on Android 2.x and 3.x, and before 11.1.115.54 on Android 4.x; Adobe AIR before 3.7.0.1530; and Adobe AIR SDK & Compiler before 3.7.0.1530 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-1380. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.75 and 11.x before 11.7.700.169 on Windows and Mac OS X, before 10.3.183.75 and 11.x before 11.2.202.280 on Linux, before 11.1.111.50 on Android 2.x and 3.x, and before 11.1.115.54 on Android 4.x; Adobe AIR before 3.7.0.1530; and Adobe AIR SDK & Compiler before 3.7.0.1530 do not properly initialize pointer arrays, which allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.75 and 11.x before 11.7.700.169 on Windows and Mac OS X, before 10.3.183.75 and 11.x before 11.2.202.280 on Linux, before 11.1.111.50 on Android 2.x and 3.x, and before 11.1.115.54 on Android 4.x; Adobe AIR before 3.7.0.1530; and Adobe AIR SDK & Compiler before 3.7.0.1530 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-1378. | 10 |
||
10h00 +00:00 |
Use-after-free vulnerability in Google Chrome before 26.0.1410.43 on Linux allows remote attackers to cause a denial of service or possibly have unspecified other impact by leveraging the presence of an extension that creates a pop-up window. | 7.5 |
||
09h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.183.68 and 11.x before 11.6.602.180 on Windows and Mac OS X, before 10.3.183.68 and 11.x before 11.2.202.275 on Linux, before 11.1.111.44 on Android 2.x and 3.x, and before 11.1.115.48 on Android 4.x; Adobe AIR before 3.6.0.6090; Adobe AIR SDK before 3.6.0.6090; and Adobe AIR SDK & Compiler before 3.6.0.6090 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
09h00 +00:00 |
Use-after-free vulnerability in Adobe Flash Player before 10.3.183.68 and 11.x before 11.6.602.180 on Windows and Mac OS X, before 10.3.183.68 and 11.x before 11.2.202.275 on Linux, before 11.1.111.44 on Android 2.x and 3.x, and before 11.1.115.48 on Android 4.x; Adobe AIR before 3.6.0.6090; Adobe AIR SDK before 3.6.0.6090; and Adobe AIR SDK & Compiler before 3.6.0.6090 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
09h00 +00:00 |
Adobe Flash Player before 10.3.183.68 and 11.x before 11.6.602.180 on Windows and Mac OS X, before 10.3.183.68 and 11.x before 11.2.202.275 on Linux, before 11.1.111.44 on Android 2.x and 3.x, and before 11.1.115.48 on Android 4.x; Adobe AIR before 3.6.0.6090; Adobe AIR SDK before 3.6.0.6090; and Adobe AIR SDK & Compiler before 3.6.0.6090 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
09h00 +00:00 |
Heap-based buffer overflow in Adobe Flash Player before 10.3.183.68 and 11.x before 11.6.602.180 on Windows and Mac OS X, before 10.3.183.68 and 11.x before 11.2.202.275 on Linux, before 11.1.111.44 on Android 2.x and 3.x, and before 11.1.115.48 on Android 4.x; Adobe AIR before 3.6.0.6090; Adobe AIR SDK before 3.6.0.6090; and Adobe AIR SDK & Compiler before 3.6.0.6090 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
20h00 +00:00 |
Unspecified vulnerability in the MathML implementation in WebKit in Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, has unknown impact and remote attack vectors, related to a "high severity security issue." | 7.5 |
||
15h00 +00:00 |
Cisco Prime LAN Management Solution (LMS) 4.1 through 4.2.2 on Linux does not properly validate authentication and authorization requests in TCP sessions, which allows remote attackers to execute arbitrary commands via a crafted session, aka Bug ID CSCuc79779. | 10 |
||
20h00 +00:00 |
Google Chrome before 24.0.1312.52 on Linux uses weak permissions for shared memory segments, which has unspecified impact and attack vectors. | 7.5 |
||
21h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.50 and 11.x before 11.5.502.146 on Windows and Mac OS X, before 10.3.183.50 and 11.x before 11.2.202.261 on Linux, before 11.1.111.31 on Android 2.x and 3.x, and before 11.1.115.36 on Android 4.x; Adobe AIR before 3.5.0.1060; and Adobe AIR SDK before 3.5.0.1060 allows attackers to execute arbitrary code via unspecified vectors. | 10 |
||
10h00 +00:00 |
IBM Advanced Settings Utility (ASU) through 3.62 and 3.70 through 9.21 and Bootable Media Creator (BoMC) through 2.30 and 3.00 through 9.21 on Linux allow local users to overwrite arbitrary files via a symlink attack on a (1) temporary file or (2) log file. | 3.3 |
||
23h00 +00:00 |
The SSH USERAUTH CHANGE REQUEST feature in SSH Tectia Server 6.0.4 through 6.0.20, 6.1.0 through 6.1.12, 6.2.0 through 6.2.5, and 6.3.0 through 6.3.2 on UNIX and Linux, when old-style password authentication is enabled, allows remote attackers to bypass authentication via a crafted session involving entry of blank passwords, as demonstrated by a root login session from a modified OpenSSH client with an added input_userauth_passwd_changereq call in sshconnect2.c. | 9.3 |
||
10h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
10h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
10h00 +00:00 |
Google V8 before 3.13.7.5, as used in Google Chrome before 23.0.1271.64, does not properly perform write operations, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors. | 7.5 |
||
21h00 +00:00 |
Unspecified vulnerability in the Core RDBMS component in Oracle Database Server 10.2.0.4, 10.2.0.5, 11.1.0.7, 11.2.0.2, and 11.2.0.3, when running on Unix and Linux platforms, allows local users to affect integrity and availability via unknown vectors. | 3.3 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than other Flash Player buffer overflow CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
Adobe Flash Player before 10.3.183.29 and 11.x before 11.4.402.287 on Windows and Mac OS X, before 10.3.183.29 and 11.x before 11.2.202.243 on Linux, before 11.1.111.19 on Android 2.x and 3.x, and before 11.1.115.20 on Android 4.x; Adobe AIR before 3.4.0.2710; and Adobe AIR SDK before 3.4.0.2710 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than other Flash Player memory corruption CVEs listed in APSB12-22. | 10 |
||
08h00 +00:00 |
The VPN downloader in the download_install component in Cisco AnyConnect Secure Mobility Client 3.1.x before 3.1.00495 on Linux accepts arbitrary X.509 server certificates without user interaction, which allows remote attackers to obtain sensitive information via vectors involving an invalid certificate, aka Bug ID CSCua11967. | 5 |
||
17h00 +00:00 |
Adobe Flash Player before 10.3.183.23 and 11.x before 11.4.402.265 on Windows and Mac OS X, before 10.3.183.23 and 11.x before 11.2.202.238 on Linux, before 11.1.111.16 on Android 2.x and 3.x, and before 11.1.115.17 on Android 4.x; Adobe AIR before 3.4.0.2540; and Adobe AIR SDK before 3.4.0.2540 allow attackers to cause a denial of service (application crash) by leveraging a logic error during handling of Firefox dialogs. | 5 |
||
08h00 +00:00 |
The WebGL implementation in Mozilla Firefox before 15.0, Firefox ESR 10.x before 10.0.7, Thunderbird before 15.0, Thunderbird ESR 10.x before 10.0.7, and SeaMonkey before 2.12 on Linux, when a large number of sampler uniforms are used, does not properly interact with Mesa drivers, which allows remote attackers to execute arbitrary code or cause a denial of service (stack memory corruption) via a crafted web site. | 9.3 |
||
08h00 +00:00 |
Unspecified vulnerability in the XML feature in IBM DB2 9.7 before FP6 on Linux, UNIX, and Windows allows remote authenticated users to read arbitrary XML files via unknown vectors. | 3.5 |
||
08h00 +00:00 |
Multiple unspecified vulnerabilities in Adobe Reader through 10.1.4 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted PDF document, related to "sixteen more crashes affecting Windows, OS X, or both systems." | 9.3 |
||
16h00 +00:00 |
Opera before 12.01 on Windows and UNIX, and before 11.66 and 12.x before 12.01 on Mac OS X, ignores some characters in HTML documents in unspecified circumstances, which makes it easier for remote attackers to conduct cross-site scripting (XSS) attacks via a crafted document. | 4.3 |
||
16h00 +00:00 |
Opera before 12.01 on Windows and UNIX, and before 11.66 and 12.x before 12.01 on Mac OS X, allows user-assisted remote attackers to trick users into downloading and executing arbitrary files via a small window for the download dialog, a different vulnerability than CVE-2012-1924. | 6.8 |
||
16h00 +00:00 |
Opera before 12.01 on Windows and UNIX, and before 11.66 and 12.x before 12.01 on Mac OS X, does not properly escape characters in DOM elements, which makes it easier for remote attackers to bypass cross-site scripting (XSS) protection mechanisms via a crafted HTML document. | 4.3 |
||
16h00 +00:00 |
Unspecified vulnerability in Opera before 12.01 on Windows and UNIX, and before 11.66 and 12.x before 12.01 on Mac OS X, has unknown impact and attack vectors, related to a "low severity issue." | 10 |
||
15h00 +00:00 |
Google Chrome before 21.0.1180.57 on Linux does not properly isolate renderer processes, which allows remote attackers to cause a denial of service (cross-process interference) via unspecified vectors. | 5 |
||
15h00 +00:00 |
Google Chrome before 21.0.1180.57 on Linux does not properly handle tabs, which allows remote attackers to execute arbitrary code or cause a denial of service (application crash) via unspecified vectors. | 7.5 |
||
13h00 +00:00 |
Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, does not request user confirmation before continuing a large series of downloads, which allows user-assisted remote attackers to cause a denial of service (resource consumption) via a crafted web site. | 4.3 |
||
13h00 +00:00 |
The drag-and-drop implementation in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows user-assisted remote attackers to bypass intended file access restrictions via a crafted web site. | 4.3 |
||
13h00 +00:00 |
Off-by-one error in the GIF decoder in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted image. | 4.3 |
||
13h00 +00:00 |
Multiple unspecified vulnerabilities in the PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allow remote attackers to have an unknown impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
Multiple integer overflows in the PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allow remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
The PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, does not properly handle object linkage, which allows remote attackers to cause a denial of service (use-after-free) or possibly have unspecified other impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
The webRequest API in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, does not properly interact with the Chrome Web Store, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted web site. | 6.8 |
||
13h00 +00:00 |
Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to obtain potentially sensitive information about pointer values by leveraging access to a WebUI renderer process. | 5 |
||
13h00 +00:00 |
Use-after-free vulnerability in the PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
The PDF functionality in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors that trigger out-of-bounds write operations. | 7.5 |
||
13h00 +00:00 |
Use-after-free vulnerability in the Cascading Style Sheets (CSS) DOM implementation in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted document. | 6.8 |
||
13h00 +00:00 |
Buffer overflow in the WebP decoder in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted WebP image. | 6.8 |
||
13h00 +00:00 |
The date-picker implementation in Google Chrome before 21.0.1180.57 on Mac OS X and Linux, and before 21.0.1180.60 on Windows and Chrome Frame, allows user-assisted remote attackers to cause a denial of service or possibly have unspecified other impact via a crafted web site. | 6.8 |
||
22h00 +00:00 |
HP System Management Homepage (SMH) before 7.1.1 does not have an off autocomplete attribute for unspecified form fields, which makes it easier for remote attackers to obtain access by leveraging an unattended workstation. | 10 |
||
22h00 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) before 7.1.1 allows remote attackers to cause a denial of service, or possibly obtain sensitive information or modify data, via unknown vectors. | 7.5 |
||
22h00 +00:00 |
HP System Management Homepage (SMH) before 7.1.1 does not properly validate input, which allows remote authenticated users to have an unspecified impact via unknown vectors. | 9 |
||
22h00 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) before 7.1.1 allows remote authenticated users to gain privileges and obtain sensitive information via unknown vectors. | 9 |
||
22h00 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) before 7.1.1 allows local users to obtain sensitive information via unknown vectors. | 4.9 |
||
20h00 +00:00 |
The VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 2.x before 2.5 MR6 on Windows, and 2.x before 2.5 MR6 and 3.x before 3.0 MR8 on Mac OS X and Linux, does not properly validate binaries that are received by the downloader process, which allows remote attackers to execute arbitrary code via vectors involving (1) ActiveX or (2) Java components, aka Bug ID CSCtw47523. | 9.3 |
||
16h00 +00:00 |
Google Chrome before 19.0.1084.52 on Linux does not properly perform a cast of an unspecified variable, which allows remote attackers to cause a denial of service or possibly have unknown other impact by leveraging an error in the GTK implementation of the UI. | 7.5 |
||
19h00 +00:00 |
Integer signedness error in the db2dasrrm process in the DB2 Administration Server (DAS) in IBM DB2 9.1 through FP11, 9.5 before FP9, and 9.7 through FP5 on UNIX platforms allows remote attackers to execute arbitrary code via a crafted request that triggers a heap-based buffer overflow. | 7.5 |
||
19h00 +00:00 |
Unspecified vulnerability in IBM Tivoli Monitoring Agent (ITMA), as used in IBM DB2 9.5 before FP9 on UNIX, allows local users to gain privileges via unknown vectors. | 7.2 |
||
20h00 +00:00 |
The Matrix3D component in Adobe Flash Player before 10.3.183.16 and 11.x before 11.1.102.63 on Windows, Mac OS X, Linux, and Solaris; before 11.1.111.7 on Android 2.x and 3.x; and before 11.1.115.7 on Android 4.x allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.16 and 11.x before 11.1.102.63 on Windows, Mac OS X, Linux, and Solaris; before 11.1.111.7 on Android 2.x and 3.x; and before 11.1.115.7 on Android 4.x does not properly handle integers, which allows attackers to obtain sensitive information via unspecified vectors. | 5 |
||
17h00 +00:00 |
The Linux kernel, when using IPv6, allows remote attackers to determine whether a host is sniffing the network by sending an ICMPv6 Echo Request to a multicast address and determining whether an Echo Reply is sent, as demonstrated by thcping. | 5 |
||
02h00 +00:00 |
Buffer overflow in Novell iPrint Server in Novell Open Enterprise Server 2 (OES2) through SP3 on Linux allows remote attackers to execute arbitrary code via a crafted attributes-natural-language field. | 7.5 |
||
15h00 +00:00 |
Mozilla Firefox 4.x through 9.0 and SeaMonkey before 2.7 on Linux and Mac OS X set weak permissions for Firefox Recovery Key.html, which might allow local users to read a Firefox Sync key via standard filesystem operations. | 2.1 |
||
01h00 +00:00 |
Unspecified vulnerability in HP Operations Agent 11.00 and Performance Agent 4.73 and 5.0 on AIX, HP-UX, Linux, and Solaris allows local users to bypass intended directory-access restrictions via unknown vectors. | 3.2 |
||
23h00 +00:00 |
Stack-based buffer overflow in the ActionScript Virtual Machine (AVM) component in Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows remote attackers to execute arbitrary code via unspecified vectors. | 9.3 |
||
23h00 +00:00 |
Stack-based buffer overflow in the ActionScript Virtual Machine (AVM) component in Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows attackers to execute arbitrary code or cause a denial of service via unspecified vectors. | 9.3 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows attackers to execute arbitrary code or cause a denial of service (browser crash) via unspecified vectors, related to a "logic error issue." | 9.3 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows attackers to bypass intended access restrictions and obtain sensitive information via unspecified vectors, related to a "security control bypass." | 5 |
||
23h00 +00:00 |
Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows remote attackers to execute arbitrary code via crafted streaming media, related to a "logic error vulnerability." | 9.3 |
||
23h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Adobe Flash Player before 10.3.183.10 on Windows, Mac OS X, Linux, and Solaris, and before 10.3.186.7 on Android, allows remote attackers to inject arbitrary web script or HTML via a crafted URL, related to a "universal cross-site scripting issue," as exploited in the wild in September 2011. | 4.3 |
||
08h00 +00:00 |
Google Chrome before 14.0.835.163 on Linux does not use the PIC and PIE compiler options for position-independent code, which has unspecified impact and attack vectors. | 7.5 |
||
19h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted SWF file, as demonstrated by "about 400 unique crash signatures." | 9.3 |
||
19h00 +00:00 |
native/unix/native/jsvc-unix.c in jsvc in the Daemon component 1.0.3 through 1.0.6 in Apache Commons, as used in Apache Tomcat 5.5.32 through 5.5.33, 6.0.30 through 6.0.32, and 7.0.x before 7.0.20 on Linux, does not drop capabilities, which allows remote attackers to bypass read permissions for files via a request to an application. | 5 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2140, CVE-2011-2417, and CVE-2011-2425. | 10 |
||
20h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2138 and CVE-2011-2416. | 10 |
||
20h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2136 and CVE-2011-2416. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows remote attackers to bypass the Same Origin Policy and obtain sensitive information via unspecified vectors. | 6.4 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2135, CVE-2011-2417, and CVE-2011-2425. | 10 |
||
20h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2130, CVE-2011-2134, CVE-2011-2137, and CVE-2011-2415. | 10 |
||
20h00 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2130, CVE-2011-2134, CVE-2011-2137, and CVE-2011-2414. | 10 |
||
20h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2136 and CVE-2011-2138. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2135, CVE-2011-2140, and CVE-2011-2425. | 10 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-2135, CVE-2011-2140, and CVE-2011-2417. | 10 |
||
20h00 +00:00 |
IBM InfoSphere Information Server 8.5 and 8.5.0.1 on Unix and Linux, as used in IBM InfoSphere DataStage 8.5 and 8.5.0.1 and other products, uses weak permissions for unspecified files, which allows local users to gain privileges via unknown vectors. | 7.2 |
||
20h00 +00:00 |
IBM InfoSphere Information Server 8.5 and 8.5.0.1 on Unix and Linux, as used in IBM InfoSphere DataStage 8.5 and 8.5.0.1 and other products, assigns incorrect ownership to unspecified files, which allows local users to gain privileges via unknown vectors. | 7.2 |
||
19h16 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2134, CVE-2011-2137, CVE-2011-2414, and CVE-2011-2415. | 10 |
||
19h16 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2130, CVE-2011-2137, CVE-2011-2414, and CVE-2011-2415. | 10 |
||
19h16 +00:00 |
Buffer overflow in Adobe Flash Player before 10.3.183.5 on Windows, Mac OS X, Linux, and Solaris and before 10.3.186.3 on Android, and Adobe AIR before 2.7.1 on Windows and Mac OS X and before 2.7.1.1961 on Android, allows attackers to execute arbitrary code via unspecified vectors, a different vulnerability than CVE-2011-2130, CVE-2011-2134, CVE-2011-2414, and CVE-2011-2415. | 10 |
||
23h00 +00:00 |
sys/sys_unix.c in the ioQuake3 engine on Unix and Linux, as used in World of Padman 1.5.x before 1.5.1.1 and OpenArena 0.8.x-15 and 0.8.x-16, allows remote game servers to execute arbitrary commands via shell metacharacters in a long fs_game variable. | 7.5 |
||
18h00 +00:00 |
IBM Lotus Symphony 3 before FP3 on Linux allows remote attackers to cause a denial of service (application crash) via a certain sample document. | 4.3 |
||
21h00 +00:00 |
Adobe Flash Player before 10.3.181.26 on Windows, Mac OS X, Linux, and Solaris, and 10.3.185.23 and earlier on Android, allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, as exploited in the wild in June 2011. | 10 |
||
17h00 +00:00 |
The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.5.3041, and 3.0.x before 3.0.629, on Linux and Mac OS X downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a Java applet, aka Bug ID CSCsy05934. | 9.3 |
||
18h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows remote attackers to execute arbitrary code via ActionScript that improperly handles a long array object. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to obtain sensitive information via unspecified vectors. | 5 |
||
20h00 +00:00 |
Integer overflow in Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-0620, CVE-2011-0621, and CVE-2011-0622. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-0619, CVE-2011-0621, and CVE-2011-0622. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-0619, CVE-2011-0620, and CVE-2011-0622. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2011-0619, CVE-2011-0620, and CVE-2011-0621. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors, related to a "bounds checking" issue, a different vulnerability than CVE-2011-0624, CVE-2011-0625, and CVE-2011-0626. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors, related to a "bounds checking" issue, a different vulnerability than CVE-2011-0623, CVE-2011-0625, and CVE-2011-0626. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors, related to a "bounds checking" issue, a different vulnerability than CVE-2011-0623, CVE-2011-0624, and CVE-2011-0626. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows attackers to execute arbitrary code via unspecified vectors, related to a "bounds checking" issue, a different vulnerability than CVE-2011-0623, CVE-2011-0624, and CVE-2011-0625. | 9.3 |
||
20h00 +00:00 |
Adobe Flash Player before 10.3.181.14 on Windows, Mac OS X, Linux, and Solaris and before 10.3.185.21 on Android allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via crafted Flash content, as possibly exploited in the wild in May 2011 by a Microsoft Office document with an embedded .swf file. | 9.3 |
||
10h00 +00:00 |
The do_extendedOp function in ibmslapd in IBM Tivoli Directory Server (TDS) 6.0 before 6.0.0.62 (aka 6.0.0.8-TIV-ITDS-IF0004) on Linux, Solaris, and Windows allows remote authenticated users to cause a denial of service (ABEND) via a malformed LDAP extended operation that triggers certain comparisons involving the NULL operation OID. | 4 |
||
19h00 +00:00 |
VMware vmrun, as used in VIX API 1.x before 1.10.3 and VMware Workstation 6.5.x and 7.x before 7.1.4 build 385536 on Linux, might allow local users to gain privileges via a Trojan horse shared library in an unspecified directory. | 6.9 |
||
20h00 +00:00 |
Unspecified vulnerability in Hitachi EUR Form Client before 05-10 -/D 2010.11.15 and 05-10-CA (* 2) 2010.11.15; Hitachi EUR Form Service before 05-10 -/D 2010.11.15; and uCosminexus EUR Form Service before 07-60 -/D 2010.11.15 on Windows, before 05-10 -/D 2010.11.15 and 07-50 -/D 2010.11.15 on Linux, and before 07-50 -/C 2010.11.15 on AIX; allows remote attackers to execute arbitrary code via unknown attack vectors. | 10 |
||
19h00 +00:00 |
Cross-site scripting (XSS) vulnerability in HP Insight Diagnostics Online Edition before 8.5.1.3712 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. | 4.3 |
||
14h00 +00:00 |
The cook codec in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, Mac RealPlayer 11.0 through 12.0.0.1444, and Linux RealPlayer 11.0.2.1744 does not properly perform initialization, which has unspecified impact and attack vectors. | 10 |
||
14h00 +00:00 |
The cook codec in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Mac RealPlayer 11.0 through 11.1, and Linux RealPlayer 11.0.2.1744 does not properly initialize the number of channels, which allows attackers to obtain unspecified "memory access" via unknown vectors. | 5 |
||
14h00 +00:00 |
Use-after-free vulnerability in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.0.1, Mac RealPlayer 11.0 through 11.1, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted StreamTitle tag in an ICY SHOUTcast stream, related to the SMIL file format. | 9.3 |
||
14h00 +00:00 |
Integer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.0.1, Mac RealPlayer 11.0 through 11.1, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a malformed MLLT atom in an AAC file. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, Mac RealPlayer 11.0 through 11.1, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code via malformed multi-rate data in an audio stream. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.1, Mac RealPlayer 11.0 through 11.1, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code via a large Screen Width value in the Screen Descriptor header of a GIF87a file in an RTSP stream. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, Mac RealPlayer 11.0 through 12.0.0.1444, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code by specifying many subbands in cook audio codec information in a Real Audio file. | 9.3 |
||
14h00 +00:00 |
The drv2.dll (aka RV20 decompression) module in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, RealPlayer Enterprise 2.1.2 and 2.1.3, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted value of an unspecified length field in an RV20 video stream. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Mac RealPlayer 11.0 through 11.1, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to have an unspecified impact via a crafted SIPR file. | 9.3 |
||
14h00 +00:00 |
Multiple heap-based buffer overflows in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allow remote attackers to have an unspecified impact via a crafted RealMedia file. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Mac RealPlayer 11.0 through 12.0.0.1444, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to have an unspecified impact via a crafted RA5 file. | 9.3 |
||
14h00 +00:00 |
Array index error in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer Enterprise 2.1.2, Mac RealPlayer 11.0 through 11.1, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code via a malformed Media Properties Header (aka MDPR) in a RealMedia file. | 9.3 |
||
14h00 +00:00 |
Integer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, RealPlayer Enterprise 2.1.2, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to have an unspecified impact via crafted frame dimensions in an SIPR stream. | 9.3 |
||
14h00 +00:00 |
RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allow remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted RealMedia video file. | 9.3 |
||
14h00 +00:00 |
The RealAudio codec in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.4, Mac RealPlayer 11.0 through 12.0.0.1444, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via a crafted audio stream in a RealMedia file. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in the cook codec in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code via unspecified data in the initialization buffer. | 9.3 |
||
14h00 +00:00 |
Multiple heap-based buffer overflows in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, and Linux RealPlayer 11.0.2.1744 allow remote attackers to have an unspecified impact via a crafted header in an IVR file. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, RealPlayer Enterprise 2.1.2 and 2.1.3, Linux RealPlayer 11.0.2.1744, and possibly HelixPlayer 1.0.6 and other versions, allows remote attackers to execute arbitrary code via crafted ImageMap data in a RealMedia file, related to certain improper integer calculations. | 9.3 |
||
14h00 +00:00 |
Heap-based buffer overflow in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.5, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code via a crafted conditional component in AAC frame data. | 9.3 |
||
14h00 +00:00 |
Integer overflow in the pnen3260.dll module in RealNetworks RealPlayer 11.0 through 11.1, RealPlayer SP 1.0 through 1.1.1, Mac RealPlayer 11.0 through 11.1, and Linux RealPlayer 11.0.2.1744 allows remote attackers to execute arbitrary code via a crafted TIT2 atom in an AAC file. | 9.3 |
||
19h00 +00:00 |
/opt/rv/Versions/CurrentVersion/Mcu/Config/Mcu.val in Cisco Unified Videoconferencing (UVC) System 5110 and 5115, when the Linux operating system is used, uses a weak hashing algorithm for the (1) administrator and (2) operator passwords, which makes it easier for local users to obtain sensitive information by recovering the cleartext values, aka Bug ID CSCti54010. | 4.9 |
||
19h00 +00:00 |
Cisco Unified Videoconferencing (UVC) System 5110 and 5115, when the Linux operating system is used, uses world-readable permissions for the /etc/shadow file, which allows local users to discover encrypted passwords by reading this file, aka Bug ID CSCti54043. | 4.9 |
||
18h00 +00:00 |
Cisco Unified Videoconferencing (UVC) System 5110 and 5115, when the Linux operating system is used, has a default password for the (1) root, (2) cs, and (3) develop accounts, which makes it easier for remote attackers to obtain access via the (a) FTP or (b) SSH daemon, aka Bug ID CSCti54008. | 10 |
||
16h00 +00:00 |
Adobe Flash Player before 9.0.289.0 and 10.x before 10.1.102.64 on Windows, Mac OS X, Linux, and Solaris and 10.1.95.1 on Android, and authplay.dll (aka AuthPlayLib.bundle or libauthplay.so.0.0.0) in Adobe Reader and Acrobat 9.x through 9.4, allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via crafted SWF content, as exploited in the wild in October 2010. | 9.3 |
||
18h00 +00:00 |
Google Chrome before 6.0.472.59 on Linux does not properly implement the Khmer locale, which allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via unknown vectors. | 9.8 |
Critical |
|
17h26 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) for Linux 6.0 and 6.1 allows remote authenticated users to obtain sensitive information and gain root privileges via unknown vectors. | 9 |
||
18h00 +00:00 |
Adobe Flash Media Server (FMS) before 3.0.6, and 3.5.x before 3.5.4, allows attackers to execute arbitrary code via unspecified vectors, related to a "JS method vulnerability." | 10 |
||
18h00 +00:00 |
Adobe Flash Media Server (FMS) before 3.0.6, and 3.5.x before 3.5.4, allows attackers to cause a denial of service via unspecified vectors, related to a "JS method issue." | 5 |
||
18h00 +00:00 |
Unspecified vulnerability in Adobe Flash Media Server (FMS) before 3.0.6, and 3.5.x before 3.5.4, allows attackers to cause a denial of service (memory consumption) via unknown vectors. | 5 |
||
18h00 +00:00 |
Adobe Flash Media Server (FMS) before 3.0.6, and 3.5.x before 3.5.4, allows attackers to cause a denial of service via unspecified vectors, related to an "input validation issue." | 5 |
||
16h00 +00:00 |
Multiple buffer overflows in the iSNS implementation in isns.c in (1) Linux SCSI target framework (aka tgt or scsi-target-utils) before 1.0.6, (2) iSCSI Enterprise Target (aka iscsitarget or IET) 1.4.20.1 and earlier, and (3) Generic SCSI Target Subsystem for Linux (aka SCST or iscsi-scst) 1.0.1.1 and earlier allow remote attackers to cause a denial of service (memory corruption and daemon crash) or possibly execute arbitrary code via (a) a long iSCSI Name string in an SCN message or (b) an invalid PDU. | 5 |
||
17h00 +00:00 |
Mathematica 7, when running on Linux, allows local users to overwrite arbitrary files via a symlink attack on (1) files within /tmp/MathLink/ or (2) /tmp/fonts$$.conf. | 1.9 |
||
12h00 +00:00 |
Unspecified vulnerability in HP System Management Homepage (SMH) 6.0 before 6.0.0-95 on Linux, and 6.0 before 6.0.0.96 on Windows, allows remote authenticated users to obtain sensitive information, modify data, and cause a denial of service via unknown vectors. | 4.6 |
||
16h00 +00:00 |
Format string vulnerability in vmrun in VMware VIX API 1.6.x, VMware Workstation 6.5.x before 6.5.4 build 246459, VMware Player 2.5.x before 2.5.4 build 246459, and VMware Server 2.x on Linux, and VMware Fusion 2.x before 2.0.7 build 246742, allows local users to gain privileges via format string specifiers in process metadata. | 7.2 |
||
15h00 +00:00 |
Director Agent 6.1 before 6.1.2.3 in IBM Systems Director on AIX and Linux uses incorrect permissions for the (1) diruninstall and (2) opt/ibm/director/bin/wcitinst scripts, which allows local users to gain privileges by executing these scripts. | 7.2 |
||
19h00 +00:00 |
Firewall Builder 3.0.4, 3.0.5, and 3.0.6, when running on Linux, allows local users to gain privileges via a symlink attack on an unspecified temporary file that is created by the iptables script. | 3.3 |
||
19h00 +00:00 |
Unspecified vulnerability in Cisco Security Agent 5.2 before 5.2.0.285, when running on Linux, allows remote attackers to cause a denial of service (kernel panic) via "a series of TCP packets." | 7.8 |
||
19h00 +00:00 |
The do_extendedOp function in ibmslapd in IBM Tivoli Directory Server (TDS) 6.2 on Linux allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a crafted SecureWay 3.2 Event Registration Request (aka a 1.3.18.0.2.12.1 request). | 5 |
||
15h00 +00:00 |
The MessageDigest.isEqual function in Java Runtime Environment (JRE) in Sun Java SE in JDK and JRE 5.0 before Update 22, JDK and JRE 6 before Update 17, SDK and JRE 1.3.x before 1.3.1_27, and SDK and JRE 1.4.x before 1.4.2_24 allows remote attackers to spoof HMAC-based digital signatures, and possibly bypass authentication, via unspecified vectors related to "timing attack vulnerabilities," aka Bug Id 6863503. | 5 |
||
15h00 +00:00 |
Unspecified vulnerability in Sun Java SE in JDK and JRE 5.0 before Update 22, JDK and JRE 6 before Update 17, SDK and JRE 1.3.x before 1.3.1_27, and SDK and JRE 1.4.x before 1.4.2_24 allows remote attackers to cause a denial of service (memory consumption) via crafted DER encoded data, which is not properly decoded by the ASN.1 DER input stream parser, aka Bug Id 6864911. | 5 |
||
15h00 +00:00 |
Unspecified vulnerability in Sun Java SE in JDK and JRE 5.0 before Update 22, JDK and JRE 6 before Update 17, SDK and JRE 1.3.x before 1.3.1_27, and SDK and JRE 1.4.x before 1.4.2_24 allows remote attackers to cause a denial of service (memory consumption) via crafted HTTP headers, which are not properly parsed by the ASN.1 DER input stream parser, aka Bug Id 6864911. | 5 |
||
18h00 +00:00 |
Heap-based buffer overflow in ibmdiradm in IBM Tivoli Directory Server (TDS) 6.0 on Linux allows remote attackers to have an unspecified impact via unknown vectors that trigger heap corruption, as demonstrated by a certain module in VulnDisco Pack Professional 8.11. NOTE: as of 20090903, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes. | 7.5 |
||
18h00 +00:00 |
Unspecified vulnerability in IBM Tivoli Directory Server (TDS) 6.0 on Linux allows remote attackers to cause a denial of service via unknown vectors, as demonstrated by a certain module in VulnDisco Pack Professional 8.11. NOTE: as of 20090903, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes. | 5 |
||
16h00 +00:00 |
The system.openURL function in StoneTrip Ston3D StandalonePlayer (aka S3DPlayer StandAlone) 1.6.2.4 and 1.7.0.1 and WebPlayer (aka S3DPlayer Web) 1.6.0.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the first argument (the sURL argument). | 9.3 |
||
22h00 +00:00 |
The cache manager in the client in OpenAFS 1.0 through 1.4.8 and 1.5.0 through 1.5.58, and IBM AFS 3.6 before Patch 19, on Linux allows remote attackers to cause a denial of service (system crash) via an RX response with a large error-code value that is interpreted as a pointer and dereferenced, related to use of the ERR_PTR macro. | 7.8 |
||
14h00 +00:00 |
Sun xVM VirtualBox 2.0.0, 2.0.2, 2.0.4, 2.0.6r39760, 2.1.0, 2.1.2, and 2.1.4r42893 on Linux allows local users to gain privileges via a hardlink attack, which preserves setuid/setgid bits on Linux, related to DT_RPATH:$ORIGIN. | 6.9 |
||
23h00 +00:00 |
Unspecified vulnerability in Adobe Flash Player for Linux 10.0.12.36, and 9.0.151.0 and earlier, allows remote attackers to execute arbitrary code via a crafted SWF file. | 9.3 |
||
19h00 +00:00 |
Acronis True Image Echo Server 9.x build 8072 on Linux does not properly encrypt backups to an FTP server, which allows remote attackers to obtain sensitive information. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 5 |
||
19h00 +00:00 |
Calacode @Mail 5.41 on Linux does not require administrative authentication for build-plesk-upgrade.php, which allows remote attackers to obtain sensitive information by creating and downloading a backup archive of the entire @Mail directory tree. NOTE: this can be leveraged for remote exploitation of CVE-2008-3395. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 7.8 |
||
17h20 +00:00 |
Stack-based buffer overflow in the libbecompat library in Ingres 2.6, Ingres 2006 release 1 (aka 9.0.4), and Ingres 2006 release 2 (aka 9.1.0) on Linux and HP-UX allows local users to gain privileges by setting a long value of an environment variable before running (1) verifydb, (2) iimerge, or (3) csreport. | 4.6 |
||
12h00 +00:00 |
Untrusted search path vulnerability in dbmsrv in SAP MaxDB 7.6.03.15 on Linux allows local users to gain privileges via a modified PATH environment variable. | 4.4 |
||
14h00 +00:00 |
Calacode @Mail 5.41 on Linux uses weak world-readable permissions for (1) webmail/libs/Atmail/Config.php and (2) webmail/webadmin/.htpasswd, which allows local users to obtain sensitive information by reading these files. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 5 |
||
16h00 +00:00 |
Unspecified vulnerability in Sun Java Web Console 3.0.2, 3.0.3, and 3.0.4 allows remote attackers to bypass intended access restrictions and determine the existence of files or directories via unknown vectors. | 7.8 |
||
23h00 +00:00 |
Cross-site scripting (XSS) vulnerability in Numara FootPrints for Linux 8.1 allows remote attackers to inject arbitrary web script or HTML via the Title form field when setting an appointment. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 4.3 |
||
23h00 +00:00 |
MRcgi/MRProcessIncomingForms.pl in Numara FootPrints 8.1 on Linux allows remote attackers to execute arbitrary code via shell metacharacters in the PROJECTNUM parameter. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. | 7.5 |
||
23h00 +00:00 |
Format string vulnerability in the emf_multipart_encrypted function in mail/em-format.c in Evolution 2.12.3 and earlier allows remote attackers to execute arbitrary code via a crafted encrypted message, as demonstrated using the Version field. | 6.8 |
||
18h00 +00:00 |
Heap-based buffer overflow in Mozilla Thunderbird before 2.0.0.12 and SeaMonkey before 1.1.8 might allow remote attackers to execute arbitrary code via a crafted external-body MIME type in an e-mail message, related to an incorrect memory allocation during message preview. | 7.5 |
||
19h00 +00:00 |
ovtopmd in HP OpenView Network Node Manager (OV NNM) 6.41, 7.01, and 7.51 allows remote attackers to cause a denial of service (crash) via a crafted TCP request that triggers an out-of-bounds memory access. | 7.8 |
||
19h00 +00:00 |
cp, when running with an option to preserve symlinks on multiple OSes, allows local, user-assisted attackers to overwrite arbitrary files via a symlink attack using crafted directories containing multiple source files that are copied to the same destination. | 6.9 |
||
21h00 +00:00 |
Apache HTTP Server, when running on Linux with a document root on a Windows share mounted using smbfs, allows remote attackers to obtain unprocessed content such as source files for .php programs via a trailing "\" (backslash), which is not handled by the intended AddType directive. | 4.3 |
||
19h00 +00:00 |
Unspecified vulnerability in the Device Manager daemon (utdevmgrd) in Sun Ray Server Software 2.0, 3.0, 3.1, and 3.1.1 allows remote attackers to cause a denial of service (daemon crash) via unspecified vectors. | 7.8 |
||
00h00 +00:00 |
Adobe Flash Player 9.x up to 9.0.48.0, 8.x up to 8.0.35.0, and 7.x up to 7.0.70.0, when running on Linux, uses insecure permissions for memory, which might allow local users to gain privileges. | 4.4 |
||
20h00 +00:00 |
Multiple unspecified vulnerabilities in IBM Hardware Management Console (HMC) 7 R3.2.0 allow attackers to gain privileges via "some HMC commands." | 4.6 |
||
17h00 +00:00 |
Cross-site scripting (XSS) vulnerability in index.php in FTP Admin 0.1.0 allows remote attackers to inject arbitrary web script or HTML via the error parameter in an error page action. | 4.3 |
||
23h00 +00:00 |
Util/difflog.pl in zsh 4.3.4 allows local users to overwrite arbitrary files via a symlink attack on temporary files. | 4.6 |
||
19h00 +00:00 |
Unspecified vulnerability in (1) DB2WATCH and (2) DB2FREEZE in IBM DB2 UDB 9.1 before Fixpak 4 has unknown impact and attack vectors. | 10 |
||
19h00 +00:00 |
Unspecified vulnerability in unspecified setuid programs in IBM DB2 UDB 9.1 before Fixpak 4 allows local users to have an unknown impact. | 7.2 |
||
19h00 +00:00 |
Unspecified vulnerability in the DB2DART tool in IBM DB2 UDB 9.1 before Fixpak 4 allows attackers to execute arbitrary commands as the DB2 instance owner, related to invocation of TPUT by DB2DART. | 10 |
||
19h00 +00:00 |
IBM DB2 UDB 9.1 before Fixpak 4 uses incorrect permissions on ACLs for DB2NODES.CFG, which has unknown impact and attack vectors. NOTE: the vendor description of this issue is too vague to be certain that it is security-related. | 10 |
||
19h00 +00:00 |
Unspecified vulnerability in the SSL LOAD GSKIT action in IBM DB2 UDB 9.1 before Fixpak 4 has unknown impact and attack vectors, involving a call to dlopen when the effective uid is root. | 7.2 |
||
19h00 +00:00 |
Unspecified vulnerability in DB2LICD in IBM DB2 UDB 9.1 before Fixpak 4 has unknown impact and attack vectors, related to creation of an "insecure directory." | 7.2 |
||
19h00 +00:00 |
IBM DB2 UDB 9.1 before Fixpak 4 assigns incorrect privileges to the (1) DB2ADMNS and (2) DB2USERS alternative groups, which has unknown impact. NOTE: the vendor description of this issue is too vague to be certain that it is security-related. | 10 |
||
19h00 +00:00 |
IBM DB2 UDB 9.1 before Fixpak 4 does not properly perform vector aggregation, which might allow attackers to cause a denial of service (divide-by-zero error and DBMS crash), related to an "overflow." NOTE: the vendor description of this issue is too vague to be certain that it is security-related. | 7.8 |
||
19h00 +00:00 |
IBM DB2 UDB 9.1 before Fixpak 4 does not properly handle use of large numbers of file descriptors, which might allow attackers to have an unknown impact involving "memory corruption." NOTE: the vendor description of this issue is too vague to be certain that it is security-related. | 9.3 |
||
21h00 +00:00 |
Multiple cross-site scripting (XSS) vulnerabilities in (1) login.php, (2) register.php, (3) post.php, and (4) common.php in Phorum before 3.4.3 allow remote attackers to inject arbitrary web script or HTML via unknown attack vectors. | 4.3 |
||
23h00 +00:00 |
Directory traversal vulnerability in Unreal Tournament Server 436 and earlier allows remote attackers to access known files via a ".." (dot dot) in an unreal:// URL. | 5 |
||
23h00 +00:00 |
Invision Power Services Invision Board 1.0 through 1.1.1, when a forum is password protected, stores the administrator password in a cookie in plaintext, which could allow remote attackers to gain access. | 5 |
||
23h00 +00:00 |
Album.pl 6.1 allows remote attackers to execute arbitrary commands, when an alternative configuration file is used, via unknown attack vectors. | 5 |
||
18h00 +00:00 |
Mozilla Firefox before 2.0.0.8 and SeaMonkey before 1.1.5, when running on Linux systems with gnome-vfs support, might allow remote attackers to read arbitrary files on SSH/sftp servers that accept key authentication by creating a web page on the target server, in which the web page contains URIs with (1) smb: or (2) sftp: schemes that access other files from the server. | 4.3 |
||
08h00 +00:00 |
Petitforum stores the liste.txt data file under the web document root with insufficient access control, which allows remote attackers to obtain sensitive information such as e-mail addresses and encrypted passwords. | 5 |
||
08h00 +00:00 |
Gallery 1.3.3 creates directories with insecure permissions, which allows local users to read, modify, or delete photos. | 4.8 |
||
23h00 +00:00 |
Cross-site scripting (XSS) vulnerability in links.php script in myPHPNuke 1.8.8, and possibly earlier versions, allows remote attackers to inject arbitrary HTML and web script via the (1) ratenum or (2) query parameters. | 4.3 |
||
17h00 +00:00 |
Heap-based buffer overflow in libmpdemux/aviheader.c in MPlayer 1.0rc1 and earlier allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a .avi file with certain large "indx truck size" and nEntriesInuse values, and a certain wLongsPerEntry value. | 7.6 |
||
21h00 +00:00 |
Buffer overflow in Hitachi Cosminexus V4 through V7, Processing Kit for XML before 20070511, Developer's Kit for Java before 20070312, and third-party products that use this software, allows attackers to have an unknown impact via certain GIF images, related to use of GIF image processing APIs by a Java application. | 10 |
||
22h00 +00:00 |
Stack-based buffer overflow in the reply_nttrans function in Samba 2.2.7a and earlier allows remote attackers to execute arbitrary code via a crafted request, a different vulnerability than CVE-2003-0201. | 7.5 |
||
17h00 +00:00 |
PHP remote file inclusion vulnerability in index.php in Achievo 1.1.0 allows remote attackers to execute arbitrary PHP code via a URL in the config_atkroot parameter. | 10 |
||
20h00 +00:00 |
formmail.php in Jetbox CMS 2.1 allows remote attackers to send arbitrary e-mails (spam) via modified recipient, _SETTINGS[allowed_email_hosts][], and subject parameters. | 5.8 |
||
20h00 +00:00 |
The png_handle_tRNS function in pngrutil.c in libpng before 1.0.25 and 1.2.x before 1.2.17 allows remote attackers to cause a denial of service (application crash) via a grayscale PNG image with a bad tRNS chunk CRC value. | 5 |
||
08h00 +00:00 |
Buffer overflow in the SockPrintf function in wu-ftpd 2.6.2 and earlier, when compiled with MAIL_ADMIN option enabled on a system that supports very long pathnames, might allow remote anonymous users to execute arbitrary code by uploading a file with a long pathname, which triggers the overflow when wu-ftpd constructs a notification message to the administrator. | 9.3 |
||
15h00 +00:00 |
Multiple cross-site scripting (XSS) vulnerabilities in freePBX 2.2.x allow remote attackers to inject arbitrary web script or HTML via the (1) From, (2) To, (3) Call-ID, (4) User-Agent, and unspecified other SIP protocol fields, which are stored in /var/log/asterisk/full and displayed by admin/modules/logfiles/asterisk-full-log.php. | 6.8 |
||
23h00 +00:00 |
Unspecified vulnerability in the Servlet Engine/Web Container in IBM WebSphere Application Server (WAS) before 6.1.0.7 has unknown impact and attack vectors. | 7.5 |
||
21h00 +00:00 |
The RFC_SET_REG_SERVER_PROPERTY function in the SAP RFC Library 6.40 and 7.00 before 20070109 implements an option for exclusive access to an RFC server, which allows remote attackers to cause a denial of service (client lockout) via unspecified vectors. NOTE: This information is based upon a vague initial disclosure. Details will be updated after the grace period has ended. | 5 |
||
00h00 +00:00 |
SQL injection vulnerability in directory.php in Super Link Exchange Script 1.0 might allow remote attackers to execute arbitrary SQL queries via the cat parameter. | 7.5 |
||
16h00 +00:00 |
Ezboo webstats, possibly 3.0.3, allows remote attackers to bypass authentication and gain access via a direct request to (1) update.php and (2) config.php. | 7.5 |
||
08h00 +00:00 |
artswrapper in aRts, when running setuid root on Linux 2.6.0 or later versions, does not check the return value of the setuid function call, which allows local users to gain root privileges by causing setuid to fail, which prevents artsd from dropping privileges. | 7.8 |
High |
|
04h00 +00:00 |
The ugidd RPC interface, by design, allows remote attackers to enumerate valid usernames by specifying arbitrary UIDs that ugidd maps to local user and group names. | 5 |
2025©
tesweb SA
